Hi,
with a -CURRENT from yesterday, I get a panic when copying large amounts
of data from my laptop to the desktop system (panic on the desktop):
panic: page fault
panic messages:
---
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor
Hello Andreas,
Monday, November 17, 2003, 8:11:47 AM, you wrote:
AK> #7 0xc05ed8a9 in ip_input (m=0x0) at
AK> /usr/src/sys/netinet/ip_input.c:364
AK> #8 0xc05e6292 in div_output (so=0xc2f11d20, m=0xc16d6600,
AK> sin=0xc2d834b0,
AK> control=0x0) at /usr/src/sys/netinet/ip_divert.c:364
AK> (
Salut,
Doug Rabson <[EMAIL PROTECTED]> wrote:
>On Sat, 2003-11-15 at 22:32, Philippe Charnier wrote:
>> Hello,
>>
>> I have a Compaq armada 7800 with a noname pccard ethernet adapter
>> which used to be detected as:
>>
>> rl0: port 0x1100-0x11ff mem 0x8800-0x880001f
>f irq 11 at device 0.0
On Mon, 2003-11-17 at 08:44, Philippe Charnier wrote:
> Salut,
>
> Doug Rabson <[EMAIL PROTECTED]> wrote:
>
> >On Sat, 2003-11-15 at 22:32, Philippe Charnier wrote:
> >> Hello,
> >>
> >> I have a Compaq armada 7800 with a noname pccard ethernet adapter
> >> which used to be detected as:
> >>
>
I've been getting the activation failed message since I started running
current. I'm using an atheros based card, and it works fine after I insert
it, remove it, and insert it again. The first insertion produces the cbb0:
activation failed message, and on the second insertion it recognizes it
fin
Antoine Jacoutot <[EMAIL PROTECTED]> writes:
> Here is what I did:
> $ cvsup blablabla...
> $ make buildkernel KERNCONF=MYKERNEL && make install kernel KERNCONF=MYKERNEL
There's not much point in 'make buildkernel' if you haven't done 'make
buildworld' first.
DES
--
Dag-Erling Smørgrav - [EMAIL
The subject should be pretty self explanatory. However, this commit trips
some of the landmines in the nVidia nForce3 Pro-150 chipset and/or reference
bios.
Boards known to be broken by the commit:
ASUS SK8N: two problems..
1) requires 'device atpic' and that you run in 'mixed mode', even thou
Harald Schmalzbauer <[EMAIL PROTECTED]> writes:
> since about one day "kill 1" and "init 1" don't work anymore!
> Now I don't know how to change to single user mode from normal boot now.
man shutdown
DES
--
Dag-Erling Smørgrav - [EMAIL PROTECTED]
___
Hello.
There is a problem with mount(2) failures. It can cause panics.
How-to-repeat.
# dd if=/dev/random of=/test.img bs=1m count=8
# mdconfig -a -t vnode -f /test.img -u 25
# mkdir -p /mnt/test
# mount /dev/md25 /mnt/test
(fail)
# mount /dev/md25
On Sun, Nov 16, 2003 at 09:51:30PM -0800, Kris Kennaway wrote:
> On Mon, Nov 17, 2003 at 12:51:49AM -0500, Anthony Schneider wrote:
> > This isn't *totally* the case. :)
> >
> > My problem is that in upgrading from 5.1-RELEASE to -CURRENT today,
> > installworld fails at installing "test" with (ha
On Mon, Nov 17, 2003 at 01:51:53AM -0800, Peter Wemm wrote:
> sledge.freebsd.org is now running in SMP, as is the loaner 4-way Opteron
> that I have for testing.
Now that you've got all 4 CPU's spinning up, producing maxium BTU's,
aren't you glad I brought you that new useful space header for wint
Hi,
I've now finally managed to test this, a bit later than I anticipated.
It does help the situation quite a lot, but I still have sound problems.
They are much less audible now, as I cannot hear any crackles and pops.
However in music with a steady rythm I notice that every now and then it
must
Erik Trulsson <[EMAIL PROTECTED]> wrote:
>On Sun, Nov 16, 2003 at 07:24:00PM -0700, Brent Jones wrote:
>>
>> This is just a case of OS evolution. /sbin used to be the place where
>> the statically linked recovery things would be placed, in case the
>> shared libraries got hosed. The only thing
Janet Sullivan wrote:
Jens Rehsack wrote:
mail and rebuild all ports, my machine always crashes
when I start X.
My problem is, that I cannot determine the reason
for the crashes, so I cannot think about a workaround.
Any hints are very welcome :-)
I've had the exact same symptoms as you with a r
Chris Knight wrote:
-Original Message-
From: Jens Rehsack [mailto:[EMAIL PROTECTED]
Sent: Monday, 17 November 2003 00:00
To: [EMAIL PROTECTED]
Subject: Machine freeze when X starts
Hi,
after I updated my machine yesterday to the -CURRENT
src/ and ports/ of yesterday (2003-11-15 10:30 GMT
Max Laier wrote:
>
> Hello Andreas,
>
> Monday, November 17, 2003, 8:11:47 AM, you wrote:
> AK> #7 0xc05ed8a9 in ip_input (m=0x0) at
> AK> /usr/src/sys/netinet/ip_input.c:364
> AK> #8 0xc05e6292 in div_output (so=0xc2f11d20, m=0xc16d6600,
> AK> sin=0xc2d834b0,
> AK> control=0x0) at /usr/src
On Mon, 17 Nov 2003 09:02:56 +0100
Max Laier <[EMAIL PROTECTED]> wrote:
> Hello Andreas,
>
> Monday, November 17, 2003, 8:11:47 AM, you wrote:
> AK> #7 0xc05ed8a9 in ip_input (m=0x0) at
> AK> /usr/src/sys/netinet/ip_input.c:364
> AK> #8 0xc05e6292 in div_output (so=0xc2f11d20, m=0xc16d6600,
> A
>Submitter-Id: current-users
>Originator:Jens Rehsack
>Organization: LiWing IT-Services
>Confidential: no
>Synopsis: [PATCH] /usr/sbin/moused fails if ums is built into kernel
>Severity: serious
>Priority: high
>Category: bin
>Class: sw-bug
>Release: FreeBS
Hi,
Since some time FreeBSD-current panics with a compact flash disk
in a pccard adapter. The kernel panics with "integer divide fault"
as soon as the card is encountered.
I first saw the "integer divide fault" with a kernel build on
November 6th.
With a newer kerner (Nov 10th) the panic changed
* Erik Trulsson <[EMAIL PROTECTED]> [031116 23:21]:
> On Sun, Nov 16, 2003 at 07:24:00PM -0700, Brent Jones wrote:
> > This is just a case of OS evolution. /sbin used to be the place where
> > the statically linked recovery things would be placed, in case the
> > shared libraries got hosed. The
* Harald Schmalzbauer <[EMAIL PROTECTED]> [031116 23:42]:
Content-Description: signed data
> On Monday 17 November 2003 05:25, Steve Kargl wrote:
> > On Mon, Nov 17, 2003 at 04:39:08AM +0100, Harald Schmalzbauer wrote:
> > Content-Description: signed data
> >
> > > Salve,
> > >
> > > since about on
OK, this morning I cvsup'd and recompiled my kernel and moused.
My mouse is working again.
Thanks
- David
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Mon, 17 Nov 2003, Pawel Jakub Dawidek wrote:
> Hello.
>
> There is a problem with mount(2) failures. It can cause panics.
>
> How-to-repeat.
>
> # dd if=/dev/random of=/test.img bs=1m count=8
> # mdconfig -a -t vnode -f /test.img -u 25
> # mkdir -p /mnt/test
> # mou
On Sun, 16 Nov 2003, Jens Rehsack wrote:
> after I updated my machine yesterday to the -CURRENT src/ and ports/ of
> yesterday (2003-11-15 10:30 GMT), build kernel and world as described in
> Kirks HEADSUP mail and rebuild all ports, my machine always crashes when
> I start X.
>
> My problem is
At Sun, 16 Nov 2003 20:14:24 -0800 (PST),
Daryl Chance wrote:
> I am currently not able to load my vinum array
> (haven't tried to revert back to pre-statfs source)
Me too.
After upgrading the kernel from -current as of mid september to
today's, I rebooted and got "vinum loaded, no drives found" m
Robert Watson wrote:
On Sun, 16 Nov 2003, Jens Rehsack wrote:
after I updated my machine yesterday to the -CURRENT src/ and ports/ of
yesterday (2003-11-15 10:30 GMT), build kernel and world as described in
Kirks HEADSUP mail and rebuild all ports, my machine always crashes when
I start X.
My p
On Mon, Nov 17, 2003 at 09:00:20AM -0500, Michael Edenfield wrote:
> * Erik Trulsson <[EMAIL PROTECTED]> [031116 23:21]:
> > On Sun, Nov 16, 2003 at 07:24:00PM -0700, Brent Jones wrote:
> > > This is just a case of OS evolution. /sbin used to be the place where
> > > the statically linked recover
Hi,
I end up with the following when I run `make world` on 5.1-RELEASE-p10.
/usr/src/contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No such file or
directory
In file included from /usr/src/contrib/libstdc++/libsupc++/eh_globals.cc:33:
/usr/src/contrib/libstdc++/libsupc++/unwind-cxx.
What do you have your CFLAGS/CPUTYPE set to? I've run into this before
with aggressive CFLAGS/CPUTYPE i believe (-O3 with athlon-mp)
seth
> Hi,
>
> I end up with the following when I run `make world` on 5.1-RELEASE-p10.
>
>
> /usr/src/contrib/libstdc++/libsupc++/unwind-cxx.h:41:20: unwind.h: No
On Sat, 15 Nov 2003, Jos Backus wrote:
> > If its a real hub, hubs aren't full duplex.
>
> Yeah, I know (believe it or not, but my job description says "Network
> Engineer" :-).
I don't make assumptions about titles and knowledge levels. :-)
> > If its a switch, the switch and PC might not have
Bill Vermillion wrote:
> I would think that instead of NO_DYNAMICROOT root in make.conf,
> a varialbe of DYNAMICROOT be used with the default of building
> static, and having the option of building dynamic for those
> who need to save those few MB of space. IOW don't change one of
> the things th
On Sat, 15 Nov 2003, Matthew Dillon wrote:
> I don't understand the question. All that happens is that functions like
> fstat() and statfs() become libc functions rather then direct syscalls.
> The userland program doesn't know the difference, it uses fstat() and
> statfs() just l
On Mon, 17 Nov 2003, Julian Stacey wrote:
> Richard Coleman wrote:
> > But I think the time for these discussions is passed.
>
> current@ is only a concensus of /usr/src developers. /usr/src &
> /usr/ports/ users on hackers@ ports@ isp@ may not have seen current@'s
> change ? that may make la
On Mon, Nov 17, 2003 at 09:14:05AM -0800, Doug White wrote:
> On Sat, 15 Nov 2003, Jos Backus wrote:
> Just because it's been "working forever" doesn't mean it can't fail.
Of course.
> Ever heard of power surges? Static discharge? I've seen a tx on a Compaq
> motherboard go kaput with no interv
On Mon, 17 Nov 2003, Harald Schmalzbauer wrote:
> On Sunday 16 November 2003 21:11, Nate Lawson wrote:
> > The panic you see is a result of the new acpi_cpu driver, not ULE. In any
> > case, it appears that acpi_cpu_idle is being called and trying to read one
> > of the processor control registers
On Sun, 16 Nov 2003 [EMAIL PROTECTED] wrote:
> It looks like the kldload system call takes the name of the module you
> give it, like "ums", and just tacks on ".ko" and searches
> in whatever the default paths are for kernel modules until it finds
> ums.ko. Peachy.
>
> But what about if you bu
On Sun, 16 Nov 2003, Mike Durian wrote:
> I'm using -current cvsup'd as of Nov 15, 2003. When I try to do a
> dump or run the btape (fill command) program from bacula, my machine
> will lock up hard. Doesn't respond to ping. No access to kernel
> debugger. Num lock doesn't come on.
Sounds lik
On Sunday 16 November 2003 04:46 pm, Neilson Henriques wrote:
> Hi !
>
> After read the man page of ath(4) driver I decided to
> buy a DWL-G520 but it is insisting to not joy with me. :-(
> I tried to replace the board, replace the machine, reinstall
> the FreeBSD and cvsup the toda
"Robert M.Zigweid" wrote:
> I'll admit to being mostly a lurker here, but isn't the point of /sbin
> to be statically linked. That's what the 's' stands for?
>
> Second question. This seems to imply that /sbin and /bin both have to
> have the same behavior? I have no problem with /bin being dyn
The kernel changes of the past week has totally turned my AMD64 machine
that I use in 32-bit mode running FreeBSD/i386 (GENERIC):
OK boot -v
cpuid = 0; apic id = 00
instruction pointer = 0x0:0xa00
stack pointer = 0x0:0xffe
frame pointer = 0x0:0x0
code segment= b
Terry Lambert wrote:
"Robert M.Zigweid" wrote:
I'll admit to being mostly a lurker here, but isn't the point of /sbin
to be statically linked. That's what the 's' stands for?
Second question. This seems to imply that /sbin and /bin both have to
have the same behavior? I have no problem with /bi
Hi,
running a kernel from Sat Nov 15 21:58:25 CET 2003, I get the following
messages when resuming from ACPI suspend:
usb0: cannot start
usb1: cannot start
usb2: cannot start
usb0: host system error
usb0: host controller process error
usb0: host controller halted
usb1: host system error
usb1: hos
On Mon, Nov 17, 2003 at 06:26:00PM +0100, Julian Stacey wrote:
> Bill Vermillion wrote:
> > I would think that instead of NO_DYNAMICROOT root in make.conf,
> > a varialbe of DYNAMICROOT be used with the default of building
> > static, and having the option of building dynamic for those
> > who nee
Lars Eggert wrote:
Soren Schmidt wrote:
Is there any other patch I can try? I've just confirmed that this bug
still exists with today's kernel.
I cant reproduce the no matter what I try, sorry...
Would remote access to the machine in question help you?
FYI, this is still an issue:
s = ioctl(
:Well, there's some glue there now, but its pretty slim. What you
:advocate would swap system call numbers for doing structure reloading per
:call, which would significantly incrase the cost of the call.
:Considering that *BSD system call overhead is pretty bad as is, I don't
:think I'd be puttin
I'm running current with a cvsup, make world and new
kernel as of this morning. The test is on a Dell with
a dvd-rom
acd0: DVDROM at ata1-master
PIO4
I have been mounting cdrom's with no problem but
I just tried burncd and get the following error.
Nov 17 13:52:35 kernel: acd0: FAILURE -
MODE_S
On Monday 17 November 2003 10:50 am, Doug White wrote:
>
> To debug this, you will need to set up a serial console with some special
> kernel options. Instructions for booting with serial console are in the
> Handbook, but you will have to compile with the following kernel options:
Is there a tri
Hi,
I am pxebooting an md_image as root fs. While this worked for cvsup
sources from around 20031115-1501 UTC it fails woth same kernel config
with sources from today 20031117-1435 UTC.
--- 20031115-1501 ---
...
IPsec: Initialized Security Association Processing.
Mounting root from ufs:/dev/md0c
On 2003-11-17 at 18:47:28 Doug White wrote:
> If you give a specific path to a module then it will load that module.
No. It will not load arbitrary files, but _only_ files that end in
".ko". I've encountered this before, and therefore I always simply
follow a make installkernel.debug by a script
In message <[EMAIL PROTECTED]>, "Bjo
ern A. Zeeb" writes:
>Hi,
>
>I am pxebooting an md_image as root fs. While this worked for cvsup
>sources from around 20031115-1501 UTC it fails woth same kernel config
>with sources from today 20031117-1435 UTC.
>The problem
On Mon, 17 Nov 2003, David O'Brien wrote:
> The kernel changes of the past week has totally turned my AMD64 machine
> that I use in 32-bit mode running FreeBSD/i386 (GENERIC):
>
> OK boot -v
> cpuid = 0; apic id = 00
> instruction pointer = 0x0:0xa00
> stack pointer = 0x0:0xffe
> fra
walt wrote:
> Terry Lambert wrote:
> > "Robert M.Zigweid" wrote:
> >
> >>I'll admit to being mostly a lurker here, but isn't the point of /sbin
> >>to be statically linked. That's what the 's' stands for?
> >>
> >>Second question. This seems to imply that /sbin and /bin both have to
> >>have the
On Sun, 2003-11-16 at 20:14, Daryl Chance wrote:
> I am currently not able to load my vinum array
> (haven't tried to revert back to pre-statfs source)
> after I built a new kernel and world. I upgraded the
> recommended way (installkernel, reboot, single user
> mode, installworld, etc) and when m
same kernel config
> >with sources from today 20031117-1435 UTC.
>
> >The problem seems to be triggered by following commit:
> >http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/geom/geom_subr.c.diff?r1=1.61&r2=1.62&sortby=date&f=h
>
> That commit adds the message and
On Mon, 17 Nov 2003, Mike Durian wrote:
> On Monday 17 November 2003 10:50 am, Doug White wrote:
> >
> > To debug this, you will need to set up a serial console with some special
> > kernel options. Instructions for booting with serial console are in the
> > Handbook, but you will have to compile
On Monday 17 November 2003 18:45, Nate Lawson wrote:
> On Mon, 17 Nov 2003, Harald Schmalzbauer wrote:
> > On Sunday 16 November 2003 21:11, Nate Lawson wrote:
> > > The panic you see is a result of the new acpi_cpu driver, not ULE. In
> > > any case, it appears that acpi_cpu_idle is being called
Strip net cc:. Please don't crosspost, thanks.
On Mon, 17 Nov 2003, Aleksander Rozman - Andy wrote:
> I have been running named for few years now, and I never had any problem
> with it. Few days ago I upgraded system to 5.1 (Release) and named has gone
> beserk. It shows errors in named.root file
On Mon, Nov 17, 2003 at 12:59:47PM -0800, Peter Wemm wrote:
> It is 'system' binaries. The distinction between bin and sbin (and /usr/
> bin and /usr/sbin) is that the binaries in */sbin are only really supposed
> to be useful for administrators or other priviliged users.
Yup, this distinction w
syncing disks, buffers remaining...
done
Uptime: 1h25m24s
Shutting down ACPI
terneRle btoroatpi n1g2. .w.i
h interrupts disabled
panic: Assertion td->td_turnstile != NULL failed at
../../../kern/subr_turnstile.c:437
cpuid = 0;
Debugger("panic")
Stopped at Debugger+0x55: xchgl %ebx,in_De
Brent Jones wrote:
Do you know of anyone who has DRI running on an nForce2 board with an
AGP video card? I also have an nForce2 board with a Radeon 9000, and
discovered yesterday that DRI is non functional. The machine still runs
when the screen blanks, so you can access it remotely to reboot.
On Fri, 17 Jan 2003, Eric Anholt wrote:
> I'm getting the same (no drives/subdisks/plexes/volumes found) trying to
> upgrade from a Nov 11 kernel/userland to Nov 16th kernel. I tried
> seeing if using a Nov 16th vinum binary would load them, but after doing
> a stop/start, the system paniced, an
Hey all...
Been trying to get 5.1-CURRENT installed since thursday.
This is my procedure:
cvsup
make buildworld
make buildkernel
make installkernel
-- reboot --
make installworld
This is the error I've been getting (probably 25x since thursday... yes..
25 fresh installs since then)
===> bin/rc
At 10:37 AM +0100 11/17/03, Dag-Erling Smørgrav wrote:
Antoine Jacoutot <[EMAIL PROTECTED]> writes:
Here is what I did:
$ cvsup blablabla...
> $ make buildkernel KERNCONF=MYKERNEL &&
>make install kernel KERNCONF=MYKERNEL
There's not much point in 'make buildkernel' if you haven't
done
On Mon, 17 Nov 2003, Garance A Drosihn wrote:
> At 10:37 AM +0100 11/17/03, Dag-Erling Smørgrav wrote:
> >Antoine Jacoutot <[EMAIL PROTECTED]> writes:
> >> Here is what I did:
> >> $ cvsup blablabla...
> > > $ make buildkernel KERNCONF=MYKERNEL &&
> > >make install kernel KERNCONF=MYK
Thanks for the info. His analysis is correct. I'll add a detach method
that disables sleeping during shutdown.
-Nate
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL P
On Monday 17 November 2003 02:09 pm, Doug White wrote:
>
> Set flag 0x80 on sio1 and take it off of sio0. Thats what the kernel uses
> to decide which port to use. The BOOT_COMCONSOLE_PORT is used by loader
> only.
I was finally able to get some partial success by setting flag 0x30
for sio1. Whe
Hey,
1) cvsup
2) make buildworld
3) make installworld
4) make kernel KERNCONF=KERNNAME
or
cd /sys/i386/conf; config KERNNAME
cd ../compile/KERNNAME
make depend && make && make install && shutdown -r now
POOF! Your done :)
Hope that helps.
Lanny
On Mon, 2003-11-17 at 18:25, [EMAIL PROTECTED] wr
At 6:26 PM +0100 11/17/03, Julian Stacey wrote:
Seconded ! Better commit an improved switch with
default = Off.
The time for voting was months ago. In fact, we have
been running with what-you-call an "improved" switch for
the past few months, to give people a chance to work out
all the issues bef
Peter Wemm wrote:
> You may also try 'set hint.acpi.0.disabled=1' in your loader. Be sure to
> leave out the mptable options as well, and include the atpic device.
The good news is that this solves my problems on the gigabyte board. I expect
it'll work for the nvidia as well. But you will need
Tis 2003-11-18 klockan 00.25 skrev [EMAIL PROTECTED]:
> Hey all...
>
> Been trying to get 5.1-CURRENT installed since thursday.
>
> This is my procedure:
>
> cvsup
> make buildworld
> make buildkernel
> make installkernel
> -- reboot --
> make installworld
>
> This is the error I've been gettin
Hmm, I'm not sure where the actual panic is caused. This is
yesterday's kernel (about 16 hours ago).
-
% gdb -k kernel.debug /work/crash/vmcore.5
GNU gdb 5.2.1 (FreeBSD)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you a
That's exactly opposite of what UPDATING states. I don't intend to nit pick
the point, but I'm about to dig back into this tonight and I'm curious as to
which order to run things in.
According the the note in UPDATING, you should build world, build and install
kernel, reboot, then lastly insta
At 6:23 PM -0500 11/17/03, Robert Watson wrote:
On Mon, 17 Nov 2003, Garance A Drosihn wrote:
>
Uh. /usr/src/UPDATING explicitly says:
20031112:
> [...] You should build and boot a new kernel BEFORE
> doing a `make world' as the new kernel will know about
> binaries using the o
On Mon, 2003-11-17 at 16:19, Aron HÃÂ¥kanson wrote:
> Tis 2003-11-18 klockan 00.25 skrev [EMAIL PROTECTED]:
> > Hey all...
> >
> > Been trying to get 5.1-CURRENT installed since thursday.
> >
> > This is my procedure:
> >
> > cvsup
> > make buildworld
> > make buildkernel
> > make installkernel
Has anyone been successful installing
FreeBSD 5.x (or 4.x) on an IBM HS20 Blade?
I would surely be interested in pointers if
possible.
--
~Andy
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe
Tis 2003-11-18 klockan 01.45 skrev Scott Likens:
> On Mon, 2003-11-17 at 16:19, Aron Håkanson wrote:
> > Tis 2003-11-18 klockan 00.25 skrev [EMAIL PROTECTED]:
> > > Hey all...
> > >
> > > Been trying to get 5.1-CURRENT installed since thursday.
> > >
> > > This is my procedure:
> > >
> > > cvsup
On Mon, 2003-11-17 at 11:48, Andre Oppermann wrote:
> Max Laier wrote:
> >
> > Hello Andreas,
> >
> > Monday, November 17, 2003, 8:11:47 AM, you wrote:
> > AK> #7 0xc05ed8a9 in ip_input (m=0x0) at
> > AK> /usr/src/sys/netinet/ip_input.c:364
> > AK> #8 0xc05e6292 in div_output (so=0xc2f11d20, m=
Scott Likens wrote:
> On Mon, 2003-11-17 at 16:19, Aron HÃÂ¥kanson wrote:
>
>>Tis 2003-11-18 klockan 00.25 skrev [EMAIL PROTECTED]:
>>>cvsup
>>>make buildworld
>>>make buildkernel
>>>make installkernel
>>>-- reboot --
>>>make installworld
>>>
>>...
>>>/usr/src/bin/csh/../../contrib/tcsh/comple
On Sat, 15 Nov 2003, Andy Farkas wrote:
> My EISA AHA2740's don't work no more :(
# grep ahc /var/run/dmesg.boot
ahc0: at 0x2c00-0x2cff, irq 10 (level)
ahc0: on eisa0 slot 2
ahc1: at 0x4c00-0x4cff, irq 11 (level)
ahc1: on eisa0 slot 4
ahc2: port 0xf800-0xf8ff mem
0xf68fb000-0xf68fbfff irq 17
Sorry to start a new thread on this; I didn't keep any of the previous
messages related to these issues to reply to. I'm hoping these
observations can benefit someone and aid them in tracking this down.
Please bear with the length.
I have noticed the following after rebooting into today's -curre
well, it did compile, install and (mostly) boot with NO_DYNAMICROOT.
However,i'm back to another problem (see my next email).
Thanks for the responses.
-Anthony.
On Mon, Nov 17, 2003 at 12:06:11PM +0200, Ruslan Ermilov wrote:
> On Sun, Nov 16, 2003 at 09:51:30PM -0800, Kris Kennaway wrote:
> > O
I cvsuped an hour or so ago, now when I finish make buildworld I get:
===> usr.sbin/boot0cfg
cc -O -pipe -march=athlon-xp -Wsystem-headers -Werror -Wall
-Wno-format-y2k -Wno-uninitialized -c /usr/src/usr.sbin/boot0cfg/boot0cfg.c
cc -O -pipe -march=athlon-xp -Wsystem-headers -Werror -Wall
-Wno-form
Ken Smith wrote:
> On Mon, Nov 17, 2003 at 12:59:47PM -0800, Peter Wemm wrote:
>
> > It is 'system' binaries. The distinction between bin and sbin (and /usr/
> > bin and /usr/sbin) is that the binaries in */sbin are only really supposed
> > to be useful for administrators or other priviliged user
On Mon, 17 Nov 2003, Bjoern A. Zeeb wrote:
> > Where the dead pointer comes from is what has yet to be discovered.
> >
> > Do you have an atapi-cd drive in this machine ?
>
> No.
>
> while pxebooting there is no floppy and no hd and no cf rader attached.
>
> fxp0, dual intel card fxp1,2 an ed
On Mon, Nov 17, 2003 at 11:12:20PM -0500, Jason wrote:
> I cvsuped an hour or so ago, now when I finish make buildworld I get:
> ===> usr.sbin/boot0cfg
> cc -O -pipe -march=athlon-xp -Wsystem-headers -Werror -Wall
> -Wno-format-y2k -Wno-uninitialized -c /usr/src/usr.sbin/boot0cfg/boot0cfg.c
> cc -
I think this one occured as a result of
"cdcontrol -f /dev/acd1 p", but I can't be
sure.
(kgdb) bt
#0 doadump () at /usr/src/sys/kern/kern_shutdown.c:240
#1 0xc04c7ce4 in boot (howto=0x100) at /usr/src/sys/kern/kern_shutdown.c:372
#2 0xc04c8088 in panic () at /usr/src/sys/kern/kern_shutdown.c
On Sun, Nov 16, 2003 at 11:37:47PM -0500, Bill Vermillion wrote:
> For those who don't build the OS but install from binaries, this
> makes the system potentially less rugged.
>
> One of the things I disliked about the Linux systems I've been on
> is libraries that change and break things - for th
OK; now that I finally(!) got a version of -CURRENT built and running
in multi-user mode, I'll try to help identify a problem I've observed
since September, when Bill Paul committed src/sys/pci/if_rl.c rev.
1.119. And to the extent I'm able, I'd like to help with a solution. :-}
The machine in q
Have you tried re?
Warner
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Tuesday 18 November 2003 00:17, Garance A Drosihn wrote:
> Users need to specify a single target of 'installkernel',
> with no blanks between the two words. Antoine, was that
> just a typo, or did you really do 'make install kernel'?
I was a typo :)
--
Antoine Jacoutot
[EMAIL PROTECTED]
http
Hi !
I have been running named for few years now, and I never had any problem
with it. Few days ago I upgraded system to 5.1 (Release) and named has gone
beserk. It shows errors in named.root file. Error go something like this:
check_hints: no A record for address 'Something' class 1 in hints
Aleksander Rozman - Andy wrote:
Hi !
I have been running named for few years now, and I never had any
problem with it. Few days ago I upgraded system to 5.1 (Release) and
named has gone beserk. It shows errors in named.root file. Error go
something like this:
check_hints: no A record for addre
The PostgreSQL group has recently had a patch submitted with a snippet
of code from FreeBSDs src/bin/mkdir/mkdir.c.
http://www.freebsd.org/cgi/cvsweb.cgi/src/bin/mkdir/mkdir.c?annotate=1.27
Is this intentionally under the 4 clause license or does the copyright
from the website (2 clause) applied
On 2003.11.17 14:48:08 -0500, Rod Taylor wrote:
> The PostgreSQL group has recently had a patch submitted with a snippet
> of code from FreeBSDs src/bin/mkdir/mkdir.c.
>
> http://www.freebsd.org/cgi/cvsweb.cgi/src/bin/mkdir/mkdir.c?annotate=1.27
>
> Is this intentionally under the 4 clause licens
On Mon, 17 Nov 2003 14:48:08 -0500
Rod Taylor <[EMAIL PROTECTED]> wrote:
> The PostgreSQL group has recently had a patch submitted with a snippet
> of code from FreeBSDs src/bin/mkdir/mkdir.c.
>
> http://www.freebsd.org/cgi/cvsweb.cgi/src/bin/mkdir/mkdir.c?annotate=1.27
This appears to be an ori
On Mon, Nov 17, 2003 at 02:48:08PM -0500, Rod Taylor wrote:
> The PostgreSQL group has recently had a patch submitted with a snippet
> of code from FreeBSDs src/bin/mkdir/mkdir.c.
>
> http://www.freebsd.org/cgi/cvsweb.cgi/src/bin/mkdir/mkdir.c?annotate=1.27
>
> Is this intentionally under the 4 c
96 matches
Mail list logo
