On Tue, Oct 02, 2012 at 11:10:23AM -0700, Sean Bruno wrote:
On Tue, 2012-10-02 at 15:59 -0700, YongHyeon PYUN wrote:
Sean, do you have a box with BCM5703/5704/5714/5715 controller?
I have a 5704C in an HP DL380G4 here that seems to be working. I'll
have to poke around further to see what
On Thu, Sep 27, 2012 at 05:09:34PM -0700, Sean Bruno wrote:
On Wed, 2012-09-19 at 09:44 -0700, Sean Bruno wrote:
On Fri, 2012-09-14 at 14:27 -0700, YongHyeon PYUN wrote:
All,
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8. With the help of
On Tue, 2012-10-02 at 15:59 -0700, YongHyeon PYUN wrote:
Sean, do you have a box with BCM5703/5704/5714/5715 controller?
I have a 5704C in an HP DL380G4 here that seems to be working. I'll
have to poke around further to see what else I have lying around.
bge0: HP NC7782 Gigabit Server Adapter,
On Thu, 2012-09-27 at 17:09 -0700, Sean Bruno wrote:
We have seen 2 instances of one or more of the HP machines failing and
dropping off the network. however, we don't have specifics yet.
It looks like this specific error was ACPI related, not BGE related.
The C6 setting in the BIOS has
On Wed, 2012-09-19 at 09:44 -0700, Sean Bruno wrote:
On Fri, 2012-09-14 at 14:27 -0700, YongHyeon PYUN wrote:
All,
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8. With the help of Broadcom and BCM5719/BCM5720
users I managed to address the issue
On Fri, Sep 21, 2012 at 08:34:29PM +0900, Wanpeng Qian wrote:
On Thu, Sep 20, 2012 at 06:56:09AM +0900, Wanpeng Qian wrote:
Hi,
On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
Hi, here is the dmesg output.
bge0: HP NC107i PCIe Gigabit Server Adapter, ASIC rev.
I am so sorry, I make a mistake.
I exclude bge driver from kernel config
sometime before and I totally forgot it!
I will try your WIP files later.
Regards.
Qian
Does stock bge(4) in latest stable/9 recognize your controller?
If the answer is yes, would you post full verbose boot message?
On Mon, Sep 24, 2012 at 9:51 PM, Wanpeng Qian spf72...@rhythm.ocn.ne.jp wrote:
I am so sorry, I make a mistake.
I exclude bge driver from kernel config
sometime before and I totally forgot it!
I will try your WIP files later.
Ok -- I was holding off based on your earlier reports, but
On Fri, Sep 21, 2012 at 08:34:29PM +0900, Wanpeng Qian wrote:
On Thu, Sep 20, 2012 at 06:56:09AM +0900, Wanpeng Qian wrote:
Hi,
On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
Hi, here is the dmesg output.
bge0: HP NC107i PCIe Gigabit Server Adapter, ASIC rev.
On Thu, Sep 20, 2012 at 06:56:09AM +0900, Wanpeng Qian wrote:
Hi,
On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
Hi, here is the dmesg output.
bge0: HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100 mem
0xfe9f-0xfe9f irq 18 at device 0.0 on pci4
On Thu, Sep 20, 2012 at 06:56:09AM +0900, Wanpeng Qian wrote:
Hi,
On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
Hi, here is the dmesg output.
bge0: HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100 mem
0xfe9f-0xfe9f irq 18 at device 0.0 on pci4
On Fri, 2012-09-14 at 14:27 -0700, YongHyeon PYUN wrote:
All,
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8. With the help of Broadcom and BCM5719/BCM5720
users I managed to address the issue but I had to touch very
sensitive part of driver. Before
Hi,
On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
Hi, here is the dmesg output.
bge0: HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100 mem
0xfe9f-0xfe9f irq 18 at device 0.0 on pci4
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
Hi, here is the dmesg output.
bge0: HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100 mem
0xfe9f-0xfe9f irq 18 at device 0.0 on pci4
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus0:
On Mon, Sep 17, 2012 at 05:39:09PM +0600, Eugene M. Zheganin wrote:
Hi.
On 15.09.2012 03:27, YongHyeon PYUN wrote:
I'm especially interested in whether there is any ASF/IPMI
regression on BCM570x/571x.
There's a reopened bug concerning 8.x releases version of the bge(4)
driver not
Hi!
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8.
I tested it with 9.1-RC1 amd64 on a HP DL 360 G8.
Without the patch, bge0 did not work (timeouts etc).
With the patch, bge0 does work:
bge0: Broadcom unknown BCM5719, ASIC rev. 0x5719001 mem
Hi!
box. I'm especially interested in whether there is any ASF/IPMI
regression on BCM570x/571x.
Any ipmi-specific tests I should make ?
This comes with kldload ipmi:
ipmi0: IPMI System Interface port 0xca2-0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
ipmi0: KCS error: ff
Hi!
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8.
I tested it with 9.1-RC1 amd64 on a HP DL 360 G8.
Without the patch, bge0 did not work (timeouts etc).
With the patch, bge0 does work:
bge0: Broadcom unknown BCM5719, ASIC rev. 0x5719001 mem
Hi.
On 15.09.2012 03:27, YongHyeon PYUN wrote:
I'm especially interested in whether there is any ASF/IPMI
regression on BCM570x/571x.
There's a reopened bug concerning 8.x releases version of the bge(4)
driver not working with IPMI (
http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/122252
Hi, here is the dmesg output.
bge0: HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100 mem
0xfe9f-0xfe9f irq 18 at device 0.0 on pci4
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus0: MII bus on bge0
brgphy0: BCM5784 10/100/1000baseT PHY PHY 1 on miibus0
On Monday, September 17, 2012 6:46:31 am Kurt Jaeger wrote:
Hi!
box. I'm especially interested in whether there is any ASF/IPMI
regression on BCM570x/571x.
Any ipmi-specific tests I should make ?
This comes with kldload ipmi:
ipmi0: IPMI System Interface port 0xca2-0xca3 on
On Mon, Sep 17, 2012 at 5:27 AM, John Baldwin j...@freebsd.org wrote:
On Monday, September 17, 2012 6:46:31 am Kurt Jaeger wrote:
Hi!
box. I'm especially interested in whether there is any ASF/IPMI
regression on BCM570x/571x.
Any ipmi-specific tests I should make ?
This comes with
On Fri, Sep 14, 2012 at 09:11:02PM +0900, Wanpeng Qian wrote:
It seems BCM5723 support code was not added by me so I don't know
how well it works in previous FreeBSD releases. Did bge(4) ever
work with your controller?
The driver works fine except the bge0: Watchdog timeout, that will
On Fri, Sep 14, 2012 at 01:04:50PM -0500, Pedro Giffuni wrote:
Success !!!
It fixed kern/169634 for me.
Great, would you write a follow-up to the PR?
If still possible it should be pushed into 9.1-RELEASE.
I'm afraid it was too late.
Thank you so much for working on this!
No
Hi, I encounter a watchdog timeout issue on NetXtreme BCM5723 Gigabit
Ethernet PCIe, dose this patch solve this issue?
If so, I can test it.
Regards.
Qian
All,
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8. With the help of Broadcom and
On Fri, Sep 14, 2012 at 03:19:52PM +0900, Wanpeng Qian wrote:
Hi, I encounter a watchdog timeout issue on NetXtreme BCM5723 Gigabit
Ethernet PCIe, dose this patch solve this issue?
I'm not aware of BCM5723. Could you show me the output of pciconf -lcbv?
If so, I can test it.
Regards.
Hi, Here is the output.
the machine is HP Microserver N36L. onboard lan.
bge0@pci0:4:0:0:class=0x02 card=0x705d103c chip=0x165b14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5723 Gigabit Ethernet PCIe'
class = network
On Fri, Sep 14, 2012 at 05:38:36PM +0900, Wanpeng Qian wrote:
Hi, Here is the output.
the machine is HP Microserver N36L. onboard lan.
bge0@pci0:4:0:0: class=0x02 card=0x705d103c chip=0x165b14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device =
It seems BCM5723 support code was not added by me so I don't know
how well it works in previous FreeBSD releases. Did bge(4) ever
work with your controller?
The driver works fine except the bge0: Watchdog timeout, that will
bring the interface down/up for a while. make it unstable for network
Success !!!
It fixed kern/169634 for me.
If still possible it should be pushed into 9.1-RELEASE.
Thank you so much for working on this!
Pedro.
On 09/14/2012 16:27, YongHyeon PYUN wrote:
All,
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8. With the
All,
There were lots of reports that stock bge(4) does not work on Dell
Rx20/HP DL 360 G8. With the help of Broadcom and BCM5719/BCM5720
users I managed to address the issue but I had to touch very
sensitive part of driver. Before committing the change to tree I'd
like to know whether this
Hi,
I have been working on bge(4) for a while to support a new Broadcom
controller. Before doing that I committed many fundamental changes
to bge(4) in order to make it easy to add more controllers. Because
bge(4) supports many variants of controllers and have lots of
workaround for specific
32 matches
Mail list logo
