Re: 12-r326622 install won't boot
On Thu, Dec 14, 2017 at 12:46 PM, O. Hartmann wrote: > Am Tue, 12 Dec 2017 15:24:34 -0800 > "Chris H" schrieb: > > > On Tue, 12 Dec 2017 13:56:56 -0800 said > > > > > On Tue, 12 Dec 2017 14:33:10 -0700 "Warner Losh" said > > > > > > > On Tue, Dec 12, 2017 at 2:28 PM, Chris H > wrote: > > > > > > > > > On Tue, 12 Dec 2017 11:37:33 -0800 said > > > > > > > > > > Hello all, > > > > >> I just blew away a old RELENG_11, to start working with current. I > > > > >> must admit I had several disappointments regarding the installer. > > > > >> But that's for another topic, and another time. > > > > >> To the point; > > > > >> I completed the install. The only event(s) that might be notable > > > > >> during the install. Was early on during (boot?) I saw a "dumped > core" > > > > >> race past on the screen. I also experienced at least 1 LOR. But > the > > > > >> install continued, seemingly un(interrupted|affected). That said, > I > > > > >> chose the reboot option after completion. Ejected the DVD during > POST, > > > > >> and I'm stuck at: > > > > >> > > > > >> BTX loader 1.00 BTX version is 1.02 > > > > >> > > > > > > >> > > > > >> followed by 2 gibberish characters; 1 appears as a right pointing > arrow, > > > > >> the other, kind of like a battlestar galactca spaceship. > > > > >> NOTE: those 2 characters did not show up on the initial reboot > from > > > > >> the install (just the 2 lines above). But after I attempted a hard > > > > >> reset after the first fail. > > > > >> > > > > > OK tried the installation again, and nothings changed. > > > > > Still left with the 2 lines listed above. > > > > > > > > > > Guess I'll have to wait until 12-CURRENT becomes a usable version. > > > > > Sigh... > > > > > I was really hoping to run 12, so I could better develop 11. > > > > > Oh well. Guess I'll grab a copy of 11 off one of the ftp servers, > and spin > > > > > it > > > > > up. > > > > > > > > > > Thanks anyway! :-) > > > > > > > > > > > > > > > > I think a two-week old snapshot would work a lot better if you > wanted to > > > > make the jump to -current. I've botched something in my boot loader > cleanup > > > > and it's taking a little time to get sorted out... > > > OH, thank you *very* much, Warner! > > > Whew! Just in time, too. I had almost slipped the 11 DVD into the box. > > > > > > Thanks again, Warner. Hope the things go well for you. > > > > > > --Chris > > Spot on, Warner! r326056 gave me a working 12-CURRENT. Including all > > the LORs. :-) > > > > Thank you! > > > [ ... deleted line ...] > > I have the same here. I just tried on a APU2C4 r326846 and, as I reported > in another > thread earlier, it gives me on a serial console the same: > > Consoles: internal video/keyboard > Nothing more. > > The last known-good version is r326583. r326584 won't build, the same with > r326586 (bails > out with some errors in geli related stuff, I believe) and then the > subsequent versions > start to fail. I realised the issues on the serial console driven APU with > r326734 and I > tried to "bi-sect", unsuccessfully due to lack of time and resources down > to r326583. > The problem is with r326593. If you hack r326584 to build right then roll forward, you'll get md5 identical .o's until 93. I'm investigating. > Obviously I'm not alone having issues with loader/boot loader and it would > be wise to put > out a warning for all the other brave CURRENT testers out ... > That's a good idea. Warner ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: 12-r326622 install won't boot
Am Tue, 12 Dec 2017 15:24:34 -0800 "Chris H" schrieb: > On Tue, 12 Dec 2017 13:56:56 -0800 said > > > On Tue, 12 Dec 2017 14:33:10 -0700 "Warner Losh" said > > > > > On Tue, Dec 12, 2017 at 2:28 PM, Chris H wrote: > > > > > > > On Tue, 12 Dec 2017 11:37:33 -0800 said > > > > > > > > Hello all, > > > >> I just blew away a old RELENG_11, to start working with current. I > > > >> must admit I had several disappointments regarding the installer. > > > >> But that's for another topic, and another time. > > > >> To the point; > > > >> I completed the install. The only event(s) that might be notable > > > >> during the install. Was early on during (boot?) I saw a "dumped core" > > > >> race past on the screen. I also experienced at least 1 LOR. But the > > > >> install continued, seemingly un(interrupted|affected). That said, I > > > >> chose the reboot option after completion. Ejected the DVD during POST, > > > >> and I'm stuck at: > > > >> > > > >> BTX loader 1.00 BTX version is 1.02 > > > >> > > > >> > > > >> followed by 2 gibberish characters; 1 appears as a right pointing > > > >> arrow, > > > >> the other, kind of like a battlestar galactca spaceship. > > > >> NOTE: those 2 characters did not show up on the initial reboot from > > > >> the install (just the 2 lines above). But after I attempted a hard > > > >> reset after the first fail. > > > >> > > > > OK tried the installation again, and nothings changed. > > > > Still left with the 2 lines listed above. > > > > > > > > Guess I'll have to wait until 12-CURRENT becomes a usable version. > > > > Sigh... > > > > I was really hoping to run 12, so I could better develop 11. > > > > Oh well. Guess I'll grab a copy of 11 off one of the ftp servers, and > > > > spin > > > > it > > > > up. > > > > > > > > Thanks anyway! :-) > > > > > > > > > > > > I think a two-week old snapshot would work a lot better if you wanted to > > > make the jump to -current. I've botched something in my boot loader > > > cleanup > > > and it's taking a little time to get sorted out... > > OH, thank you *very* much, Warner! > > Whew! Just in time, too. I had almost slipped the 11 DVD into the box. > > > > Thanks again, Warner. Hope the things go well for you. > > > > --Chris > Spot on, Warner! r326056 gave me a working 12-CURRENT. Including all > the LORs. :-) > > Thank you! > [ ... deleted line ...] I have the same here. I just tried on a APU2C4 r326846 and, as I reported in another thread earlier, it gives me on a serial console the same: Consoles: internal video/keyboard Nothing more. The last known-good version is r326583. r326584 won't build, the same with r326586 (bails out with some errors in geli related stuff, I believe) and then the subsequent versions start to fail. I realised the issues on the serial console driven APU with r326734 and I tried to "bi-sect", unsuccessfully due to lack of time and resources down to r326583. Obviously I'm not alone having issues with loader/boot loader and it would be wise to put out a warning for all the other brave CURRENT testers out ... Regards, Oliver -- O. Hartmann Ich widerspreche der Nutzung oder Übermittlung meiner Daten für Werbezwecke oder für die Markt- oder Meinungsforschung (§ 28 Abs. 4 BDSG). pgp6zcEqTGlH1.pgp Description: OpenPGP digital signature
Re: 12-r326622 install won't boot
On Tue, 12 Dec 2017 13:56:56 -0800 said On Tue, 12 Dec 2017 14:33:10 -0700 "Warner Losh" said > On Tue, Dec 12, 2017 at 2:28 PM, Chris H wrote: > > > On Tue, 12 Dec 2017 11:37:33 -0800 said > > > > Hello all, > >> I just blew away a old RELENG_11, to start working with current. I > >> must admit I had several disappointments regarding the installer. > >> But that's for another topic, and another time. > >> To the point; > >> I completed the install. The only event(s) that might be notable > >> during the install. Was early on during (boot?) I saw a "dumped core" > >> race past on the screen. I also experienced at least 1 LOR. But the > >> install continued, seemingly un(interrupted|affected). That said, I > >> chose the reboot option after completion. Ejected the DVD during POST, > >> and I'm stuck at: > >> > >> BTX loader 1.00 BTX version is 1.02 > >> Consoles: internal video/keyboard > >> > >> followed by 2 gibberish characters; 1 appears as a right pointing arrow, > >> the other, kind of like a battlestar galactca spaceship. > >> NOTE: those 2 characters did not show up on the initial reboot from > >> the install (just the 2 lines above). But after I attempted a hard > >> reset after the first fail. > >> > > OK tried the installation again, and nothings changed. > > Still left with the 2 lines listed above. > > > > Guess I'll have to wait until 12-CURRENT becomes a usable version. > > Sigh... > > I was really hoping to run 12, so I could better develop 11. > > Oh well. Guess I'll grab a copy of 11 off one of the ftp servers, and spin > > it > > up. > > > > Thanks anyway! :-) > > > > I think a two-week old snapshot would work a lot better if you wanted to > make the jump to -current. I've botched something in my boot loader cleanup > and it's taking a little time to get sorted out... OH, thank you *very* much, Warner! Whew! Just in time, too. I had almost slipped the 11 DVD into the box. Thanks again, Warner. Hope the things go well for you. --Chris Spot on, Warner! r326056 gave me a working 12-CURRENT. Including all the LORs. :-) Thank you! --Chris > > Warner > > > > > > --Chris > > > > > >> Thank you for all your time, and consideration. > >> > >> --Chris > >> > >> ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: 12-r326622 install won't boot
On Tue, 12 Dec 2017 14:33:10 -0700 "Warner Losh" said On Tue, Dec 12, 2017 at 2:28 PM, Chris H wrote: > On Tue, 12 Dec 2017 11:37:33 -0800 said > > Hello all, >> I just blew away a old RELENG_11, to start working with current. I >> must admit I had several disappointments regarding the installer. >> But that's for another topic, and another time. >> To the point; >> I completed the install. The only event(s) that might be notable >> during the install. Was early on during (boot?) I saw a "dumped core" >> race past on the screen. I also experienced at least 1 LOR. But the >> install continued, seemingly un(interrupted|affected). That said, I >> chose the reboot option after completion. Ejected the DVD during POST, >> and I'm stuck at: >> >> BTX loader 1.00 BTX version is 1.02 >> Consoles: internal video/keyboard >> >> followed by 2 gibberish characters; 1 appears as a right pointing arrow, >> the other, kind of like a battlestar galactca spaceship. >> NOTE: those 2 characters did not show up on the initial reboot from >> the install (just the 2 lines above). But after I attempted a hard >> reset after the first fail. >> > OK tried the installation again, and nothings changed. > Still left with the 2 lines listed above. > > Guess I'll have to wait until 12-CURRENT becomes a usable version. > Sigh... > I was really hoping to run 12, so I could better develop 11. > Oh well. Guess I'll grab a copy of 11 off one of the ftp servers, and spin > it > up. > > Thanks anyway! :-) I think a two-week old snapshot would work a lot better if you wanted to make the jump to -current. I've botched something in my boot loader cleanup and it's taking a little time to get sorted out... OH, thank you *very* much, Warner! Whew! Just in time, too. I had almost slipped the 11 DVD into the box. Thanks again, Warner. Hope the things go well for you. --Chris Warner > > --Chris > > >> Thank you for all your time, and consideration. >> >> --Chris >> >> ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: 12-r326622 install won't boot
On Tue, Dec 12, 2017 at 2:28 PM, Chris H wrote: > On Tue, 12 Dec 2017 11:37:33 -0800 said > > Hello all, >> I just blew away a old RELENG_11, to start working with current. I >> must admit I had several disappointments regarding the installer. >> But that's for another topic, and another time. >> To the point; >> I completed the install. The only event(s) that might be notable >> during the install. Was early on during (boot?) I saw a "dumped core" >> race past on the screen. I also experienced at least 1 LOR. But the >> install continued, seemingly un(interrupted|affected). That said, I >> chose the reboot option after completion. Ejected the DVD during POST, >> and I'm stuck at: >> >> BTX loader 1.00 BTX version is 1.02 >> Consoles: internal video/keyboard >> >> followed by 2 gibberish characters; 1 appears as a right pointing arrow, >> the other, kind of like a battlestar galactca spaceship. >> NOTE: those 2 characters did not show up on the initial reboot from >> the install (just the 2 lines above). But after I attempted a hard >> reset after the first fail. >> > OK tried the installation again, and nothings changed. > Still left with the 2 lines listed above. > > Guess I'll have to wait until 12-CURRENT becomes a usable version. > Sigh... > I was really hoping to run 12, so I could better develop 11. > Oh well. Guess I'll grab a copy of 11 off one of the ftp servers, and spin > it > up. > > Thanks anyway! :-) I think a two-week old snapshot would work a lot better if you wanted to make the jump to -current. I've botched something in my boot loader cleanup and it's taking a little time to get sorted out... Warner > > --Chris > > >> Thank you for all your time, and consideration. >> >> --Chris >> >> >> ___ >> freebsd-current@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org >> " >> > > > ___ > freebsd-current@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" > ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: 12-r326622 install won't boot
On Tue, 12 Dec 2017 11:37:33 -0800 said Hello all, I just blew away a old RELENG_11, to start working with current. I must admit I had several disappointments regarding the installer. But that's for another topic, and another time. To the point; I completed the install. The only event(s) that might be notable during the install. Was early on during (boot?) I saw a "dumped core" race past on the screen. I also experienced at least 1 LOR. But the install continued, seemingly un(interrupted|affected). That said, I chose the reboot option after completion. Ejected the DVD during POST, and I'm stuck at: BTX loader 1.00 BTX version is 1.02 Consoles: internal video/keyboard followed by 2 gibberish characters; 1 appears as a right pointing arrow, the other, kind of like a battlestar galactca spaceship. NOTE: those 2 characters did not show up on the initial reboot from the install (just the 2 lines above). But after I attempted a hard reset after the first fail. OK tried the installation again, and nothings changed. Still left with the 2 lines listed above. Guess I'll have to wait until 12-CURRENT becomes a usable version. Sigh... I was really hoping to run 12, so I could better develop 11. Oh well. Guess I'll grab a copy of 11 off one of the ftp servers, and spin it up. Thanks anyway! :-) --Chris Thank you for all your time, and consideration. --Chris ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
