Aaro Koskinen writes:
My question is: What the heck could the SMP kernel be doing which
causes the DMA to complete faster?
The chipset probably uses PCI bus (MSI-like mechanism) to deliver the
interrupt from the IO APIC to the local APIC, which means that the PCI
bridge(s) must
Clifton Royston writes:
For anyone who's interested, I've been running FreeBSD 4.8 on the
EPIA-1M mini-ITX for at least a couple months now; it's available
Cool! Have you measured the power consumption?
I'm looking for a low power consumption, 'always on' box for my home
office, and
something to do with it being necessary to
use BIOS routines to write to the device since by the time you're
doing a crash dump all your high level drivers are not useable
anyway.
Hope that helps.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http
Bruce M Simpson writes:
I've been thinking we should definitely make the cache organization
info available via sysctl. I am thinking we should do this to make
the UMA_ALIGN_CACHE definition mean something...
If you do this, it may make sense to use the same names as MacOSX.
Eg:
g51%
it a little so it
can be applied without problems. I am not really a code guru, so if someone
could review this patch, it would be great!
Thanks in advance,
Andrew Konstantinov
--- ip_fil.c.orig Fri Dec 6 12:45:45 2002
+++ ip_fil.cTue Mar 25 17:05:09 2003
@@ -1937,24 +1937,24
,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http://www.advantagecom.net
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
-machine with uber specs. At present, we're just
waiting for OS support to catch up, though.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http://www.advantagecom.net
___
[EMAIL PROTECTED] mailing list
http
.
I wonder if our SCM would be brought into the base system or whether it
would just be left in ports?
Andrew
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
if our SCM would be brought into the base system or
whether it would just be left in ports?
We haven't even started to *test* subversion yet, so I think
it's a bit early to worry about this question!
I disagree. Andrew raised two issues (type of license and port vs
base location). The type
a system to do an automatic crash dump for any panic. It is
relatively straightforward.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http://www.advantagecom.net
___
[EMAIL PROTECTED] mailing list
http
an identically
configured kernel with debug symbols. See the FreeBSD developer's
handbook. Such a procedure will allow you to see exactly what failed
and avoid all this guesswork, though it is likely that increasing
KVA_PAGES to a value higher than 256 will be what you need.
Sincerely,
Andrew
Dung Patrick writes:
Hi
I have read http://people.freebsd.org/~ken/zero_copy/
To correctly use zero copy receive, it seems it need to set the MTU to:
have to be at least page sized, and be aligned on page boundaries.
Yes.
So is the default MTU for ethernet network card 1500
Dung Patrick writes:
Correct me if I am wrong:
To use the zero copy 'receive' on i386, you need to set the MTU to 4096 bytes(page
size) or 4096 multiples.
No, just larger than a page-size plus headers. FreeBSD's tcp
automagically sets the mss to a page-sized multiple for large MTUs.
Dag-Erling Smørgrav wrote:
Somewhere out there there is a ?Virus?/?Hacker?/?Spammer?
getting really annoying..
Yeah, but what do you expect anyone to do about it?
Swen and MyDoom are easy to detect and reject at the SMTP stage. The
fact that our mail servers don't do this is a PITA, as it
Don Bowman writes:
I'm not sure what affect on fxp. fxp is inherently limited
by something internal to it, which prevents achieving
high packet rates. bge is the best chip, but doesn't
have the best bsd support.
Just curious - why is bge the best chip? Is it because
it exports a
Luigi Rizzo writes:
On Wed, Mar 03, 2004 at 10:03:11AM -0500, Andrew Gallatin wrote:
...
I'm trying to design a new ethernet API for a firmware-based nic,
and I'm trying to convince a colleague that having separate
receive rings for small and large frames is a really good thing.
i
might explain some of the
discrepancies you see.
Doing your own output buffering in assembly shouldn't be any big deal
that I can see.
-
Andrew I MacIntyre These thoughts are mine alone...
E-mail: [EMAIL
bridged packets with bpf(4)
- good firewall support
I am especially interested in people who can test !i386, and users with
existing STP networks. I am looking forward to getting your feedback!
Andrew
___
freebsd-hackers@freebsd.org mailing list
http
On Tue, May 31, 2005 at 07:48:16PM -0400, Brian Fundakowski Feldman wrote:
On Tue, May 31, 2005 at 11:25:54AM +1200, Andrew Thompson wrote:
Hi,
I am looking for testers and code review for if_bridge, the bridge
implementation from NetBSD (and OpenBSD).
The patch and instructions can
On Tue, 10 Jan 2006, M. Warner Losh wrote:
Are you sure they provide technical documentation sufficent to write
the driver? The last time I asked, I got a nice document that said
that it implemented the sds standard sd host interface, but didn't
document what that was. TI and winbond chips
On Thu, Jan 26, 2006 at 04:31:48PM -0200, Thiago Damas wrote:
2006/1/26, Andrew Thompson [EMAIL PROTECTED]:
On Thu, Jan 26, 2006 at 02:49:54PM -0200, Thiago Damas wrote:
I'm having some problems using if_bridge, in FreeBSD 6.0 RELEASE.
I have the following situation:
When
cataloguing program I'm writing in Python and
C++.
Thanks.
Regards
Andrew
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
was more than 12
months old.
-
Andrew I MacIntyre These thoughts are mine alone...
E-mail: [EMAIL PROTECTED] (pref) | Snail: PO Box 370
[EMAIL PROTECTED] (alt) |Belconnen ACT 2616
Web
On 4/25/06, Vladimir Terziev [EMAIL PROTECTED] wrote:
Hi hackers,
is there a way to assign a hot spare disk/partition to a gmirror -ed
disks/partitions ?
There's no sense in it, is there? When we have RAID5 hot
spare is needed, because we don't know what drive will
fail
On 5/6/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I cant seem to get something working and would really appreciate some
h elp.
I use IPFW and have used NAT in the past through the ipfw divert
rules.
But what i need to get right is simply nat for a particular host
Terry Lambert writes:
Wilko Bulte wrote:
I knew not to recommend the Alpha because it is limited to 2G
of physical memory.
?
FreeBSD is limited to using 2G of whatever you have in the Alpha.
Which is a deficiency that has been debated a number of times,
IIRC it
interest in their camp for it, kind of odd
I thought) . So does that mean they had to make big changes to
their system call interface/ABI? If so, would their experiences/approach
be of any use to FreeBSD?
Andrew Lankford
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers
Terry Lambert writes:
I guess the next question is Anyone know a gigabit NIC that is
currently in production, which has hack-friendly firmware?...
I think our products are the only game in town.
http://www.myri.com/myrinet/product_list.html
Brandon D. Valentine writes:
running it through a computer (AFAIK). There are rumors afloat of
Gigabit Ethernet linecards for Myrinet switch hardware on the horizon
Slightly more than rumours --
http://www.myri.com/news/02512/slides/Seitz_roadmap.pdf
Can somebody explain to me how sysctls from klds are relocated?
For background, after the binutils upgrade in -stable, I'm unable to
load linux.ko on my desktop. The faulting address is always
0x9010102464c457f (oidp-oid_parent) and the pc is in
sysctl_find_oid_name().
The crash looks like
--exclude=*.gz usr-backup.tgz /etc/
Thanks,
Andrew.
_
Send and receive Hotmail on your mobile device: http://mobile.msn.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
Giorgos Keramidas writes:
On 2002-10-07 17:09, Ian Dowse [EMAIL PROTECTED] wrote:
This is something I have been meaning to investigate for a while: [...]
Anyway, below is a proof-of-concept patch that does the basics, but
among other things, its logic for locating the kernel
Eric Anholt writes:
On Tue, 2002-10-22 at 07:37, Andrew Gallatin wrote:
..
Do I need something special in my /etc/X11/XF86Config to make this
work? I never had problems on my old system (an alpha with a
3dlabs Permedia-2 based AGP card).
Could you send me a
grep -i dpms /etc
Eric Anholt writes:
On Mon, 2002-10-21 at 08:16, Hanspeter Roth wrote:
Hello,
I have two hosts connected to one monitor. My idea is attach the
display to the other host by issuing `xset dpms force suspend'.
This works on one host with a Matrox Millenium.
On the host with an
Eric Anholt writes:
On Mon, 2002-10-21 at 08:16, Hanspeter Roth wrote:
Hello,
I have two hosts connected to one monitor. My idea is attach the
display to the other host by issuing `xset dpms force suspend'.
This works on one host with a Matrox Millenium.
On the host with an
Hanspeter Roth writes:
On Oct 22 at 10:37, Andrew Gallatin spoke:
I've now upgraded to XFree86-Server-4.2.1_5. dpms still does not
work for me:
% xset dpms force off ; xset q | tail -5
I didn't care about off. My monitor seems to behave the similar when
set to `off
Nate Lawson writes:
Try to figure out where it was in frames 8 and 10 (probably a module).
Try the gdbmods port (/usr/ports/devel/gdbmods)
Drew
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
Julian Elischer writes:
news to me.. I run multiple terminal windows, each running tcsh.
That's with an unaltered macosX 10.1.5.
from the user perspective it looks a lot like FreeBSD 3.{something}
I think he means text-only syscons like vtys. MacOSX does not have
them. Nobody has
void writes:
Also, X11 feels quite slow if you're
used to X11. (I'm writing this from KDE running under XDarwin on a ti
powerbook, 867MHz).
Apple's new X11-for-Mac-OS-X beta software is much faster than XDarwin.
Much buggier too. And it lacks full screen mode.
I've dropped
Hi All,
FBSD 5-RC2 was giving me a SSHD PRNG not seeded problem when running under
jails, is this a problem with my configuration or a bug? And if a bug,
has it been fixed in -RELEASE?
Thanks
Andrew
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body
Nope, I will try that though
I simply went and did a MAKEDEV jail in /dev in the jail
Could that be my problem?
On Thu, 23 Jan 2003, Kris Kennaway wrote:
On Wed, Jan 22, 2003 at 02:22:27AM +, Andrew Alston wrote:
Hi All,
FBSD 5-RC2 was giving me a SSHD PRNG not seeded problem when
it seemed to run out of steam pretty quickly.
I've cc'ed the UKUG list in case someone else on there knows what the
current situation is.
Cheers.
Andrew.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
think UMN's MapServer is also OSS.
--
Andrew I MacIntyre These thoughts are mine alone...
E-mail: [EMAIL PROTECTED] | Snail: PO Box 370
[EMAIL PROTECTED]|Belconnen ACT 2616
Web:http://www.andymac.org/|Australia
To Unsubscribe
M. Warner Losh writes:
In message: [EMAIL PROTECTED]
Sean Kelly [EMAIL PROTECTED] writes:
: Has anyone ever considered embedding some sort of identifier in kernel
: modules to keep them from being loaded with the wrong kernel?
Actually, I was talking about this with Matt
to work okay in PIO4 mode. Are there any possible solutions,
or am I just stuck with PIO on this drive? I didn't see any commits to
the ata code since 4.6.2 whose log message look like they might
workaround this problem.
thanks,
andrew
To Unsubscribe: send mail to [EMAIL PROTECTED
Eric Anholt writes:
shouldn't be too big of an issue. The unique identifier is the big
problem and the fileops trick should work for that.
However, is this going to get easier some day? Are there any plans to
pass the struct file down to the drivers and have a void * in there for
in this matter.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http://www.advantagecom.net
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
the hardware gets up to a decent load. Hence, I'm hoping to
get a lot of the large memory OS issues resolved (many are by
tuning) so we can at least get what we paid for out of the hardware.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http
.
%sysctl -a |grep kvm
vm.kvm_size: 1065353216
vm.kvm_free: 0
Could someone direct me to the section of the 4.7 source tree that
handles additional KVM requests when vm.kvm_free=0 so I can go
read up on the process?
Thanks in advance.
Sincerely,
Andrew Kinney
President and
Chief Technology
from what I see in the kernel
code, so if we never get above 90% utilization I guess I could
consider the issue resolved.
What other things in Apache (besides memory sharing via PHP
and/or mod_perl) could generate PV Entry usage on a massive
scale?
Sincerely,
Andrew Kinney
President and
Chief
) is that if those systems ran
Apache like we do, they'd spiral to a crash as swap usage
increased and eventually swap was completely filled.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http://www.advantagecom.net
to use Apache, but nobody has any complaints about
performance at this point.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http://www.advantagecom.net
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org
than recoding the Linux threads module.
Sincerely,
Andrew Kinney
President and
Chief Technology Officer
Advantagecom Networks, Inc.
http://www.advantagecom.net
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
It is a little tricky (IMHO) to set up, but you can use m3socks to allow
cvsup to use a SOCKS proxy, if you have one of those. I'm also behind a
firewall so that is what I did.
Regards -- Andy
From: Ladislav Kostal [mailto:[EMAIL PROTECTED]]
On Fri, 25 Jan 2002, Dariush Azimi wrote:
I can
about FreeBSD to know if what they've
written is accurate or worthwhile but I thought if you guys could give
it the quick once over, then it could be linked to from somewhere on the
web site and perhaps in the Developer's Guide as well.
Thanks.
Andrew.
To Unsubscribe: send mail to [EMAIL
getting this added sometime soon.
Thanks again!
Andrew.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
John Baldwin writes:
On 09-Feb-02 Julian Elischer wrote:
he infrastructure needed for a new driver can be taken from
the sample driver in /usr/share/examples/drivers/make_device_driver.sh
IN -CURRENT. (use cvdweb on the website to get it)
that will at least get rid of the
Jason Mawdsley writes:
Why can't I write to memory in the first case?
Is there anyway I can implement writable but no readable memory?
I read some where that there is no true write only memory do to the
limitations of x86.
I think you must have read correctly -- your sample code
of this, but nVidia's new nForce
chipset claims to support AMD's HyperTransport.
It's mentioned on the bottom of http://www.nvidia.com/view.asp?IO=nppa
and possibly in one of the tech brief PDF's in more detail. And nForce
motherboards are certainly available to buy right now.
Andrew.
To Unsubscribe: send
Søren Schmidt writes:
Hmm, the problem is known, but belived to be fixed *IF* your BIOS
setup things the right way. I've newer seen the problem on my
ASUS CUR-DLS, but I have several reports of TYAN's (forgot the model#)
that fails all over. I have not verified if ASUS has done some
Terry Lambert writes:
So.. Is PIO safe? Is there any sort of CRC being done on PIO data?
He just said: if your chipset is programmed correctly
by the BIOS, then there will not be a problem, but
apparently, there is a very narrow band of correctly
(perhaps even only a single
Terry Lambert writes:
Andrew Gallatin wrote:
Terry Lambert writes:
So.. Is PIO safe? Is there any sort of CRC being done on PIO data?
He just said: if your chipset is programmed correctly
by the BIOS, then there will not be a problem, but
apparently
argument
And I get the a few lines of afd0: PREVENT_ALLOW - ILLEGAL REQUEST
asc=24 ascq=00 error=00 in my dmesg.
I have reformatted the memory stick from the camera but that makes no
difference. Has anyone else used this hardware device? or can anyone
help?
cheers
Andrew
To Unsubscribe: send
Justin C.Walker writes:
On Wednesday, February 20, 2002, at 04:52 PM, Julian Elischer wrote:
yes but we might as well be protocol compatible if possible :-)
If only to re-use what they did in gdb :-)
The Darwin/Mac OS X scheme only deals with IOKit because that's where
the
with Windows(ugh). As
its a new model someone else may buy one and come up with a solution in
the future.
Thanks for your help Jan.
cheers
Andrew
On Fri, 2002-02-22 at 01:26, Jan Stocker wrote:
The memory stick will also have partitions... so try
$fdisk afd0
to show up the table
something like this, please could
somebody check I'm correct in my analysis, and comment on the
feasibility of my suggested solution.
Thanks,
--
Andrew Mobbs - http://www.chiark.greenend.org.uk/~andrewm/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body
/~andrewm/msynctests.tar.gz
(51kB)
--
Andrew Mobbs - http://www.chiark.greenend.org.uk/~andrewm/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
In article [EMAIL PROTECTED] you write:
On Sun, 24 Feb 2002, Andrew Mobbs wrote:
vm.msync_flush_flags
| 0 | 1 | 2 | 3 |
---+---+---+---+---|
write | 519 | 517 | 1632 | 519 |
sync | 2227 | 176 | 848 | 177
Will Froning writes:
I have a 4.5-RELEASE-p2 box that is my Firewall/NAT/NFS server. As a
NFS client I have a RH7.2 linux box. When I do massive NFS writes to
my FBSD (from RH7.2 box), I get a panic. I've attached the info I got
from my debug kernel.
While the fix being discussed
Bruce A. Mah writes:
I was discussing this with some of my cow-orkers, as we've had a similar
situation (cluster mbufs getting temporarily depleted on a
4.5-RELEASE-p2 NFS server with Linux and FreeBSD clients, but no kernel
panics). Shouldn't the net.inet.ip.maxfragpackets sysctl
Terry Lambert writes:
Andrew Gallatin wrote:
The problem is that ip_maxfragpackets is:
Maximum number of IPv4 fragment reassembly queue entries
You ( I, most people probably) took that number to mean the cap on
the number of mbufs sitting on reassembly queues. However, its
After updating the firmware on our our 2 gigabit nic to allow enough
scatter entries per packet to stock the 9K (jumbo frame) receive
rings with cluster mubfs rather than contigmalloc'ed buffers(*), I
noticed a dramatic performance decrease: netperf TCP_STREAM
performance dropped from 1.6Gb/sec
Terry Lambert writes:
Andrew Gallatin wrote:
After updating the firmware on our our 2 gigabit nic to allow enough
scatter entries per packet to stock the 9K (jumbo frame) receive
rings with cluster mubfs rather than contigmalloc'ed buffers(*), I
noticed a dramatic performance
Denis Serenyi writes:
I've been looking at adding an SSE bcopy that runs at user-level to a
program that I'm working on. I'm using FreeBSD 4.3 currently.
I wrote the routine, and when I execute it, I get an illegal instruction
exception when I try to execute the first SSE
Denis Serenyi writes:
I don't think there will be a problem with releasing my source code.
That is, if it works and is truly a performance win :)
Cool!
There are some PDF docs available on Intel's web site that have sample
code for an SSE bcopy, and give performance results (in
Kenneth Culver writes:
OK, I found another problem, here it is:
static void
linux_prepsyscall(struct trapframe *tf, int *args, u_int *code, caddr_t
*params)
{
args[0] = tf-tf_ebx;
args[1] = tf-tf_ecx;
args[2] = tf-tf_edx;
args[3] = tf-tf_esi;
Kenneth Culver writes:
Basically, linux_mmap2 takes 6 args, and this looks here like only 5 args are
making it in... I checked this because the sixth argument to linux_mmap2() in
truss was showing 0x6, but when I printed out that arg from the kernel, it
was showing 0x0. Am I
Kenneth Culver writes:
OK, I THINK I found what calls the actual kernel syscall handler, and
sets it's args first, but I'm not sure:
from linux_locore.s
NON_GPROF_ENTRY(linux_sigcode)
...
Does anyone who actually knows assembly have any ideas?
This is the linux sigtramp, or
Kenneth Culver writes:
So, as far as I can tell, this version of glibc is doing the Right Thing,
and the ebp register is getting messed up somewhere along the line in
either the assembly code that handles the 0x80 trap in FreeBSD, or in
syscall2 (I think it's probably the asm that
Kenneth Culver writes:
I just looked at the NetBSD code like linux, they use a macro which
individually pushes the registers onto the stack rather than using
pushal (which I assume is the same as what intel calls PUSHAD in their
x86 instruction set ref. manual).
NetBSD stopped
addresses on the card (no
interface for this
in FreeBSD currently), then you should have:
tg0 - hardware MAC
tg0a- VRRP MAC #1
tg0b- VRRP MAC #2
[andrew]$ exactly what i would suggest. a single
NIC can handle multiple assigments pretty easily,
unless you're
anyone ever configure/install/use netatalk on their
BSD/Solaris machines?
i'm trying to share out two 200gb plus raid arrays to
a Mac LAN and will accept any information that can be
offered.
thanks!
__
Do You Yahoo!?
Everything you'll ever need
unsubscribe
__
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the
--- Bob Bishop [EMAIL PROTECTED] wrote: Hi,
At 08:37 03/05/02 +0100, andrew mejia wrote:
anyone ever configure/install/use netatalk on their
BSD/Solaris machines?
We run netatalk on both FreeBSD 4.x and Solaris 8.
By and large it 'just
works'. Build with gcc 2.95 (not 3.x) to avoid
There are 3 things you could do:
a) Limit your memory size in the loader
b) Use partial dumps
c) Use network dumps if you have another machine to run the dump
server on.
Both the netdump partial dump code can be found at:
http://www.cs.duke.edu/~anderson/freebsd/
Both may be a
Marc G. Fournier writes:
Oh, I like the netdump one ... I have a machine sitting right beside this
one that I can use to dump to ... has anyone thought to include this as a
'standard' sort of thing with FreeBSD? So that it keeps up with the
current code?
I plan to integrate
Marc G. Fournier writes:
Well, downloaded the files (a .tar.gz would be nice? *grin*) and the
client built perfectly, and kldload worked fine ... is there some way
someone can suggest of 'simulating a crash'? Some way to test to make
sure that it is working as expected? I have a
Marc G. Fournier writes:
Okay, seem to be about halfway there ... client kldload's no problem,
server runs ... do a ctl-alt-esc to get into DDB and type panic, and it
gives a message that its looking for the server and it finds it on the
right IP ... then it prints out a '1023' and
Nigel Roberts writes:
#10 0xc0237fbe in rl_rxeof (sc=0xc0b9d200) at ../../pci/if_rl.c:1151
#11 0xc023827a in rl_intr (arg=0xc0b9d200) at ../../pci/if_rl.c:1342
#12 0xc0279c7a in vec3 ()
#13 0xc01c2196 in ether_output (ifp=0xc0ba4000, m=0xc076af00, dst=0xc0c28770,
rt0=0xc0c59d00)
: not being able to
cope with unresponsiveness of some other service implies fragility in
the face of restarting or failure of that other service. Maybe there
are races or deadlocks that way?
--
Andrew
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body
subscribe
end
--
Andrew I MacIntyre These thoughts are mine alone...
E-mail: [EMAIL PROTECTED] | Snail: PO Box 370
[EMAIL PROTECTED]|Belconnen ACT 2616
Web:http://www.andymac.org/|Australia
To Unsubscribe: send mail
On Wed, 19 Jun 2002, Daniel Eischen wrote:
Try the patch included at the bottom.
Thanks! I will, but I don't have the library sources installed at
the moment so it will be a few days before I can test.
--
Andrew I MacIntyre These thoughts are mine alone...
E-mail: [EMAIL
John Polstra writes:
On the i386, living with the misalignment is probably the best
solution, unfortunately. The only alternatives I can think of are:
- bcopy the packet up by 2 bytes after reception to align the
payload, or
- disable PCI-X mode on the bus
If
On Wed, 19 Jun 2002, Daniel Eischen wrote:
Andrew MacIntyre wrote:
{...}
The attached C code is a simple example of a signal handling situation
which works in the non-threaded interpreter, but fails in a threaded
interpreter.
{...}
Try the patch included at the bottom.
{...}
Index
How do I dual boot -current and -stable from different slices on the
same IDE disk? (and linux too.)
When I tell lilo to boot hde3, I get the -stable boot2 and
/boot/loader from hde2 (ad4s2a). I can then monkey around setting
currdev and hints and unloading the -stable kernel then boot
Cyrille Lefevre writes:
On Sun, Jun 30, 2002 at 09:23:22PM -0400, Andrew Gallatin wrote:
How do I dual boot -current and -stable from different slices on the
same IDE disk? (and linux too.)
When I tell lilo to boot hde3, I get the -stable boot2 and
/boot/loader from hde2
Chan Tur Wei writes:
I'm not sure how booting with lilo will work (never played with it).
Instead, I dug around a bit previously, and I found that boot1.s reads:
#
# If we are on a hard drive, then load the MBR and look for the first
# FreeBSD slice. We use the fake partition
Chan Tur Wei writes:
So unless someone specifically sets the active partition, the 1st FreeBSD
one, usually -stable, will get loaded. Since boot1+boot2 is loaded by the
partition boot boot0, or the standard DOS boot (or, even MS's multi boot
selector), the above may cause the 2nd
Jacques Fourie writes:
I was wondering what the amount of effort involved would be to add
support for dumping on a remote machine via tftp, for example. This
would be extremely handy for devices with little or no hard disk space.
Does anyone know of anything with this functionality?
Terry Lambert writes:
The closest anyone has come to this (to my knowledge) is
the creation of a polled network driver and a tiny UDP
stack to permit remote debugging over the network to a
different machine on the same switch. This isn't very
close to dumping.
I think Darrell's
301 - 400 of 688 matches
Mail list logo