enlighten me?
Thanks in advance
David
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org
On 3/20/2013 9:08 AM, David Southwell wrote:
On 3/20/2013 7:53 AM, David Southwell wrote:
Hi
bigbluebutton Makefile reads:
SOFFICEBIN?=
${PREFIX}/openoffice.org-3.2.1/openoffice.org3/program/soffice.bin
with an uptodate portree we have the correct path is:
openofice-3.4.1/openoffice.org3
Hi
On a system with a large number of ports installed and where some have
been installed from binaries and some compiled what is the neatest way
to remove the binary packages and replace them with local compilations.
Thanks in advance
David
--
David Southwell ARPS AFIAP
Photographic Arts
message on
# make clean
bigbluebutton-0.71_4: /usr/ports/editors/openoffice.org-3
non-existent -- dependency list incomplete
Thanks in advance for advice
David
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital
On 3/20/2013 7:53 AM, David Southwell wrote:
Hi
bigbluebutton Makefile reads:
SOFFICEBIN?=
${PREFIX}/openoffice.org-3.2.1/openoffice.org3/program/soffice.bin
with an uptodate portree we have the correct path is:
openofice-3.4.1/openoffice.org3/program/soffice.bin
Looks as though
www
*** Error code 1
Stop in /usr/ports/graphics/lprof-devel.
Thanks in advance for any help with this
David
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman
Hi
After a clean build
# make install
fails with
please reinstall www/tomcat with HHTP_PORT=8080
I have rebuilt www/tomcat
make -DHTTP_PORT=8080
make install
but HTTP Port remains at makefile default of 8180
Altering makefile to 8080 and problem goes away
David
--
David Southwell ARPS AFIAP
Hi
Any chance of an upgrade for openfire to .3.8?
There are some bugs in 3.7 which have been fixed for 3.8
Thanks for any info
David
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman
'kdemultimedia-ffmpegthumbs-4.9.5', but 'kdemultimedia-4.9.5' is installed
** Fix the installation problem and try again.
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
David
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org
On 2/3/2013 7:21 AM, Carmel wrote:
On Sun, 03 Feb 2013 06:45:50 -0800
David Southwell articulated:
David Southwell da...@vizion2000.net
No connection to:
www.seibercom.net/logs/kdepim4.txt
http://www.seibercom.net/logs/kdepim4.txt
You might want to try it again. It is working fine
On 2/3/2013 8:36 AM, Carmel wrote:
On Sun, 03 Feb 2013 08:17:58 -0800
David Southwell articulated:
Have you done portupgrade -fr devel/boost-libs as per ports/UPDATING ?
Yes, it was during that run that the build failed. I then did a 'make
clean and tried to build the port manually: make
On 2/3/2013 9:32 AM, Carmel wrote:
On Sun, 03 Feb 2013 08:51:45 -0800
David Southwell articulated:
how about qt4-moc?
That was just brought to my attention by another poster. Evidently it
will fix the problem with kdepim4. Perhaps, this should be included in
UPDATING.
Its best to do devel
On 1/8/2013 5:45 PM, John Merryweather Cooper wrote:
On 01/05/13 05:23, David Southwell wrote:
Hi
I am having problems with my kde4 installation and feel the need to
deinstall and start again.
In view of the number of ports and dependencies can someone please let
me know the cleanest way
Hi
I cannot find a .xession-errors file - what turns it off or on?
I need to find out what is going wrong.
Kde4 is not loading
Thanks
David
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques
.
Thanks in advance
david
--
David Southwell ARPS AFIAP
Photographic Arts
Trained experienced competition judge, mentor, trainer, lecturer,
Advanced digital techniques, international project photography
___
freebsd-ports@freebsd.org mailing list
http
error on an incorrectly configured
postshaker.conf?
1. How should portshaker.conf be set for an appropriate configuration
2. I have now rebuilt the /usr/ports/
3. Have not deleted /var/cache/portshaker/*
How to proceed now?
Many thanks in advance for advice.
David
--
David Southwell ARPS AFIAP
Hi
I followed UPDATING instructions and deleted -r /akonadi immediately before
running portupgrade -a which resulted in an upgrade to kde4 8.4.
Now I seem to have a problem with kmail which when launched gives:
Error kmail
kmail encountered a fatal error and will terminate now. The
When trying to install git I get the following:
=== kwallet-4.8.3 conflicts with installed package(s):
kdeutils-4.7.3
They install files into the same place.
You may want to stop build with Ctrl + C.
=== License check disabled, port has not defined LICENSE
=
On Tuesday 13 March 2012 07:23:37 Matthew Seaman wrote:
On 13/03/2012 13:01, David Southwell wrote:
qpopper has been working fine (amd64 running postfix) but on portupgrade
I am Getting the following error:
set MISSING_OBJS to base64.o
set MISSING_SRCS to base64.c
Set AR_FLAG = -r
On Wednesday 14 March 2012 07:17:55 Mel Flynn wrote:
On 3/13/2012 14:01, David Southwell wrote:
qpopper has been working fine (amd64 running postfix) but on portupgrade
I am Getting the following error:
set MISSING_OBJS to base64.o
set MISSING_SRCS to base64.c
Set AR_FLAG = -r
On Wednesday 14 March 2012 07:17:55 Mel Flynn wrote:
On 3/13/2012 14:01, David Southwell wrote:
qpopper has been working fine (amd64 running postfix) but on portupgrade
I am Getting the following error:
set MISSING_OBJS to base64.o
set MISSING_SRCS to base64.c
Set AR_FLAG = -r
qpopper has been working fine (amd64 running postfix) but on portupgrade I am
Getting the following error:
set MISSING_OBJS to base64.o
set MISSING_SRCS to base64.c
Set AR_FLAG = -r ; RANLIB_CMD =
checking for sendmail program... ERROR: The sendmail program cannot be located
=== Script
On Tue, Dec 13, 2011 at 8:48 AM, David Southwell da...@vizion2000.net
wrote:
Hi
As you are listed as maintainer in current Makefile I thought you might
appreciate a copy
David
-- Forwarded Message --
Subject: math/py-numpy (py26-numpy-1.5.1_1,1) (checksum
Hi
As subject line - checksum mismatch error from latest upgrade.
David
___
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to freebsd-ports-unsubscr...@freebsd.org
I have noticed a small change in reporting from portupgrade for koffice-kde4.
Current behaviour reports as below even when koffice-kde4 is up to date.
Previously if koffice-kde4 was up to date there was no such report. The
previous behaviour seemed preferable as one only checked to update
On Monday 21 November 2011 10:17:18 Peter Jeremy wrote:
On 2011-Nov-19 01:53:59 -0800, David Southwell da...@vizion2000.net wrote:
Anyone up to date on how to do high quality printing with epson inkjet
printers (in my case r2400 and r2880) on freebsd8.2 amd64 systems.
print/pips* reports
On Saturday 19 November 2011 06:44:28 Patrick Powell wrote:
On 11/19/11 01:53, David Southwell wrote:
Hi
Anyone up to date on how to do high quality printing with epson inkjet
printers (in my case r2400 and r2880) on freebsd8.2 amd64 systems.
print/pips* reports
they require 386
Hi
Anyone up to date on how to do high quality printing with epson inkjet
printers (in my case r2400 and r2880) on freebsd8.2 amd64 systems. print/pips*
reports
they require 386 and do not compile on amd64.
Thanks in advance for useful pointers
David
avogadro fails with the error reports shown below.
Thanks in advance for any guidance
David
Scanning dependencies of target avogadro-app
[ 90%] Building CXX object avogadro/src/CMakeFiles/avogadro-
app.dir/editcommands.cpp.o
[ 90%] Building CXX object avogadro/src/CMakeFiles/avogadro-
Just attempting to build print/cups and get the failure below
Thanks in advance for any guidance.
David
First: Output from
[root@dns1 /usr/ports/print/cups-base]# make showconfig
=== The following configuration options are available for cups-base-1.5.0:
GNUTLS=off Build with GNUTLS instead
HI all
www.openspf.org web site is down. The site is managed by godaddy.com. When
rying to access the site godaddy.com seem to be suggesting the domain name has
not been renewed.
David
___
freebsd-ports@freebsd.org mailing list
Hi all
I am going nuts - I have used spf before but I just cannot get it working on
this FreeBSD 8.2 system.
I suspect I have done something so obviously stupid that I cannot see it.
Postgrey is working.
How can I trace the cause of the problem?
Is spf-policyd_time_limit correctly specified?
Hi all
I am going nuts - I have used spf before but I just cannot get it working on
this FreeBSD 8.2 system.
I suspect I have done something so obviously stupid that I cannot see it.
Postgrey is working.
How can I trace the cause of the problem?
Is spf-policyd_time_limit correctly specified?
Hi
One or more ports build install qt-copy (qt33). How do I stop that
happening?
When qt33 is installed other ports fail when upgrading ports.
Thanks in advance
David
Photographic Artist
Permanent Installations Design
Creative Imagery and Advanced Digital Techniques
High Dynamic Range
Can anyone cast light on this:
GISCAN Soup-2.4.gir
Traceback (most recent call last):
File /usr/local/bin/g-ir-scanner, line 43, in module
from giscanner.scannermain import scanner_main
File /usr/local/lib/gobject-introspection/giscanner/scannermain.py, line
34, in module
from
canning dependencies of target kcolorutilsdemo
Scanning dependencies of target nepomuk-rcgen
Thanks in advance for a fix for:
=== License check disabled, port has not defined LICENSE
=== Found saved configuration for libxine-1.1.19_2
= xine-vdpau.bz2 doesn't seem to exist in /usr/ports/distfiles/.
= Attempting to fetch from LOCAL/makc.
fetch: LOCAL/makcxine-vdpau.bz2: Invalid URL
Thanks in advance for a fix for:
=== License check disabled, port has not defined LICENSE
=== Found saved configuration for libxine-1.1.19_2
= xine-vdpau.bz2 doesn't seem to exist in /usr/ports/distfiles/.
= Attempting to fetch from LOCAL/makc.
fetch: LOCAL/makcxine-vdpau.bz2: Invalid URL
On 1/16/2011 11:30 AM, David Southwell wrote:
Thanks in advance for a fix for:
=== License check disabled, port has not defined LICENSE
=== Found saved configuration for libxine-1.1.19_2
= xine-vdpau.bz2 doesn't seem to exist in /usr/ports/distfiles/.
= Attempting to fetch
Sun, Jan 16, 2011 at 10:30:30AM +, David Southwell wrote:
Thanks in advance for a fix for:
[...]
Was already fixed by makc@,
http://www.freebsd.org/cgi/cvsweb.cgi/ports/multimedia/libxine/Makefile.di
ff?r1=1.164;r2=1.165 please, update your ports, and try again.
Yep the fix
Any ideas what may be happening here:
/usr/local/sbin/pkg_libchk
reports:
eclipse-3.6.1_1:
/usr/local/lib/eclipse/configuration/org.eclipse.osgi/bundles/149/1/.cp/libswt-
awt-gtk-3655.so misses libjawt.so
however:
dns1# whereis libjawt.so
libjawt.so: /usr/ports/java/diablo-jre16/work/diablo-
Hello!
06.01.2011, 04:37, David Southwell da...@vizion2000.net:
Any ideas what may be happening here:
/usr/local/sbin/pkg_libchk
reports:
eclipse-3.6.1_1:
/usr/local/lib/eclipse/configuration/org.eclipse.osgi/bundles/149/1/.cp/l
ibswt- awt-gtk-3655.so misses libjawt.so
however
What installs libjawt?
eclipse-3.6.1_1:
/usr/local/lib/eclipse/configuration/org.eclipse.osgi/bundles/149/1/.cp/libswt-
awt-gtk-3655.so misses libjawt.so
openoffice.org-3.2.1:
/usr/local/openoffice.org-3.2.1/openoffice.org/basis3.2/program/libofficebean.so
misses libjawt.so
David
Hi
pkg_libchk shows that diablo-jdk misses libodbcinst.so:
diablo-jdk-1.6.0.07.02_12: /usr/local/diablo-
jdk1.6.0/jre/lib/amd64/libJdbcOdbc.so misses libodbcinst.so
Is it right that libodbcinst.so is installed by unixODBC-2.3.0_1 ?
When attempting to install databases/libodbc++ (includes
Hello!
05.01.2011, 01:00, J. Hellenthal jh...@dataix.net:
On 01/04/2011 09:37, David Southwell wrote:
Hi
pkg_libchk shows that diablo-jdk misses libodbcinst.so:
diablo-jdk-1.6.0.07.02_12: /usr/local/diablo-
jdk1.6.0/jre/lib/amd64/libJdbcOdbc.so misses libodbcinst.so
natively package (jdk16 or openjdk6),
which always will use correct system libraries
of course, after build native jdk, diablo package should be dropped.
05.01.2011, 02:24, David Southwell da...@vizion2000.net:
style=margin: 0px; text-indent: 0px; Hello!
05.01.2011, 01:00, J. Hellenthal
Due to problems with apache22 running using ssl from ports I have deinstalled
ssl from ports and recompiled a number which I know used libssl.so.7.
I still keep finding ports needing libssl.so.7 which need to be recompiled to
use the standard OS library.
How do I identify the remaining ports I
On Mon, Jan 03, 2011 at 10:56:59AM +, David Southwell wrote:
Due to problems with apache22 running using ssl from ports I have
deinstalled ssl from ports and recompiled a number which I know used
libssl.so.7.
I still keep finding ports needing libssl.so.7 which need
Hi
Yesterday I started a thread entitled: Apache22 not starting - is this a SSL
from ports bug?.
Since then I have deinstalled ssl from ports, rebuilt apache and all relevant
ports The server now starts with no other changes and uses the same httpd.conf
file.
As a result I am now convinced
Hi
Any chance of a ports upgrade to drupal 6.20
Thanks in advance
David
Photographic Artist
Permanent Installations Design
Creative Imagery and Advanced Digital Techniques
High Dynamic Range Photography Official Portraiture
Combined darkroom digital creations
On 2 Jan 2011, at 15:40, David Southwell ARPS da...@atf4.com wrote:
Any chance of a ports upgrade to drupal 6.20
Someone submitted a pr for this earlier this morning. I'll take a look at
it later
Nick
Thanks Nick
You might also want to mention that Drupal7 is due for release
_
From: Sergio de Almeida Lenzi [mailto:lenzi.ser...@gmail.com]
Sent: 31 December 2010 08:46
To: David Southwell
Cc: 'Kurt Jaeger'; freebsd-ports@freebsd.org
Subject: RE: KDE4 load libicui18n.so.38 not found - can create system
crash!
for me, I solved this problem
Hi
Following latest updates to kde4 I am getting some problems with kde4 menus.
I tried running kbuildsycoca4 and had the errors shown in script below. Untiol
now there have been no problems with kde4 menus on the system concerned.
Is there
___
Script
A bit puzzled
I have a problem with apache22 loading and decided before doing anything else
that I would upgrade apache22 recursively to rebuild all ports upon which it
depened and which depend upon apache.
The (to me) logical command was:
dns1# portupgrade -frR apache22
Which generated the
David Southwell writes:
A bit puzzled
I have a problem with apache22 loading and decided before doing
anything else that I would upgrade apache22 recursively to
rebuild all ports upon which it depened and which depend upon
apache.
The (to me) logical command
On 01/01/11 16:42, David Southwell wrote:
David Southwell writes:
A bit puzzled
I have a problem with apache22 loading and decided before doing
anything else that I would upgrade apache22 recursively to
rebuild all ports upon which it depened and which depend upon
apache
HI
Some assistance would be much appreciated as the web server is now off line.
apache22 has mysteriously stopped loading after an attempted restart. The log
file even at duebug level does not indicate why the server will not start. It
was working fine and stopped following a recent ports
Hi
Below is a script produced from a failed attempt to load kde4 on amd64.
Up until latest upgrades there were no problems.
Now loading from
#startx now produces thhe output shown from the script file.
The very wierd thing is that in the event of a second attempt to launch x
with startx the
-Original Message-
From: Robert Huff [mailto:roberth...@rcn.com]
Sent: 31 December 2010 07:46
To: David Southwell
Cc: freebsd-ports@freebsd.org
Subject: KDE4 load libicui18n.so.38 not found - can create
system crash!
David Southwell writes:
So I am seeing two problems
-Original Message-
From: owner-freebsd-po...@freebsd.org
[mailto:owner-freebsd-po...@freebsd.org] On Behalf Of Kurt Jaeger
Sent: 31 December 2010 07:50
To: freebsd-ports@freebsd.org
Subject: Re: KDE4 load libicui18n.so.38 not found - can
create system crash!
Hi!
My guess
-Original Message-
From: owner-freebsd-po...@freebsd.org
[mailto:owner-freebsd-po...@freebsd.org] On Behalf Of David Southwell
Hi!
My guess is the primary may be solveable by rebuilding
icu and its
dependencies (quit a lot I believe!).
Yes, rebuilding devel
_
From: Sergio de Almeida Lenzi [mailto:lenzi.ser...@gmail.com]
Sent: 31 December 2010 08:46
To: David Southwell
Cc: 'Kurt Jaeger'; freebsd-ports@freebsd.org
Subject: RE: KDE4 load libicui18n.so.38 not found - can create system crash!
for me, I solved this problem with this script
I'm trying to upgrade this perl port and I'm getting the following error:
Error: no compiler detected to compile 'src/LangBulgarianModel.cpp'.
Aborting
Anyone know how to correct this?
=== p5-Encode-Detect-1.01 depends on file: /usr/local/bin/perl5.8.9 -
found
=== Patching for
On 12/27/10, David Southwell da...@vizion2000.net wrote:
On 12/27/10, David Southwell da...@vizion2000.net wrote:
Agreed - but following Doug's commit I can vouch that the PERL_THREADED
hack
was still needed for 7.2 p3 systems on amd64.
It shouldn't be needed. Can you remove
On 12/27/10, David Southwell da...@vizion2000.net wrote:
On 12/27/10, David Southwell da...@vizion2000.net wrote:
Agreed - but following Doug's commit I can vouch that the
PERL_THREADED hack
was still needed for 7.2 p3 systems on amd64.
It shouldn't be needed. Can you remove
On 12/27/10, David Southwell da...@vizion2000.net wrote:
On 12/27/10, David Southwell da...@vizion2000.net wrote:
Agreed - but following Doug's commit I can vouch that the
PERL_THREADED hack
was still needed for 7.2 p3 systems on amd64.
It shouldn't be needed. Can you
On 12/27/10 01:05, Roland Smith wrote:
On Sun, Dec 26, 2010 at 11:42:37PM +1000, Da Rock wrote:
Something I'm missing here? A fix would be nice, I should be used
to it though- ImageMagick _always_ has issues for me. I just
thought it'd be nice to get it updated for once- it
On 12/27/10 20:22, David Southwell wrote:
On 12/27/10 01:05, Roland Smith wrote:
On Sun, Dec 26, 2010 at 11:42:37PM +1000, Da Rock wrote:
Something I'm missing here? A fix would be nice, I should be used
to it though- ImageMagick _always_ has issues for me. I just
What concerns me is perl-threaded _is_ installed but it can't see
it.
Do you have in:
etc/make.conf
PERL_THREADED=true
Perhaps I'm a little daft atm. Either way I want to be clear: Are you
saying the define needs to be in the make.conf so that it will
What concerns me is perl-threaded _is_ installed but it can't see
it.
Do you have in:
etc/make.conf
PERL_THREADED=true
Perhaps I'm a little daft atm. Either way I want to be clear: Are you
saying the define needs to be in the make.conf so that it will
On 12/27/10, David Southwell da...@vizion2000.net wrote:
What concerns me is perl-threaded _is_ installed but it can't
see it.
Do you have in:
etc/make.conf
PERL_THREADED=true
Perhaps I'm a little daft atm. Either way I want to be clear
On 2010-Dec-24 10:32:13 +, David Southwell da...@vizion2000.net wrote:
Dave, you have got to start trimming messages when replying.
Not a good idea...
Repeating 370 lines of mail to just ask add 2 lines asking for more
input is wasting everyone's time (to skip over it if nothing else
On Thu, 23 Dec 2010 22:23:54 +
David Southwell da...@vizion2000.net articulated:
[snip]
can you please post the output from :
pkg_info |grep mysql
pkg_info |grep mysql
mysql-client-5.5.7 Multithreaded SQL database (client)
mysql-server-5.5.7 Multithreaded SQL database (server
The php5-mysqli-5.3.4 refuses to build. A copy of the failed build
report follows.
env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2
UPGRADE_PORT_VER=5.3.3_2 make clean === Cleaning for php5-mysqli-5.3.4
env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2
The php5-mysqli-5.3.4 refuses to build. A copy of the failed build
report follows.
env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2
UPGRADE_PORT_VER=5.3.3_2 make clean === Cleaning for php5-mysqli-5.3.4
env UPGRADE_TOOL=portupgrade UPGRADE_PORT=php5-mysqli-5.3.3_2
Hi
I have noticed that firefox-3.5.16,1 has a weird behaviour on cookie handling
with some sites when cookies are ask me every time is set for third party
cookies.
Following a denial firefox appears to lock up and the application has to be
killed to restart. Switching of tabs is not possible.
On Sun, 05 Dec 2010 00:50:08 +0100, Franci Nabalanci lum...@gmail.com
wrote:
Yesterdays update to KDE 4.5.4 from 4.5.3 was without problems but when I
start KDE (startx) it show splash screen than turn to black with mouse
cursor
which works, I heard sound when looks KDE start and
Pkg_info shows:
dns1# pkg_info |grep i18n
rubygem-i18n-0.5.0,1 New wave Internationalization support for Ruby
dns1#
However rubygem-mail-2.2.10 reports the following install failure :
dns1# make install
=== Installing for rubygem-mail-2.2.10
=== rubygem-mail-2.2.10 depends on package:
File size mismatch error
dns1# make clean
=== Cleaning for py26-numpy-1.5.1,1
dns1# make
=== License check disabled, port has not defined LICENSE
=== Found saved configuration for py26-numpy-1.4.1,1
=== Extracting for py26-numpy-1.5.1,1
= SHA256 Checksum OK for numpy-1.5.1.tar.gz.
= SHA256
On 01.12.2010 18:16 (UTC+1), David Southwell ARPS wrote:
File size mismatch error
dns1# make clean
=== Cleaning for py26-numpy-1.5.1,1
dns1# make
=== License check disabled, port has not defined LICENSE
=== Found saved configuration for py26-numpy-1.4.1,1
=== Extracting
Hi
I was idly wondering how easy/difficult it might be to maintain and access an
historical record of port installations and upgrades on a particular system.
Something fairly comprehensive that would enable one to see when a port was
first installed, its original version number, when it was
On Nov 30, 2010, at 10:24 AM, David Southwell wrote:
Something fairly comprehensive that would enable one to see when a port
was first installed, its original version number, when it was
upgraded/deinstalled/reinstalled and subsequent changes to the installed
version. Maybe also time/date
On Nov 30, 2010, at 10:41 AM, David Southwell wrote:
I was thinking of something which is far more comprehensive and
systematic. Whilst installed options are obtained by examining
/var/db/ports the files do not do not provide the detailed historical
information which I envisage
I just committed a fix that a) worked for me, and b) I think is fairly
robust, and even a candidate for being the right thing to do.
Please give it a try, and let us know if it does or does not work for you.
Doug
Thank you Doug
It works for me!
ImageMagick plus DougMagick =
Puzzled
I have perl installed with threads but getting the following upgrade problem
with graphics/ImageMagick. The upgrade fails to recognise reality - Perl is
installed with threads!
with OpenEXR or OpenMP I get the same problem:
dns1# make
=== ImageMagick-6.6.5.10 OpenEXR requires threads.
Em Ter, 2010-11-23 Ã s 17:50 +, David Southwell escreveu:
Puzzled
I have perl installed with threads but getting the following upgrade
problem with graphics/ImageMagick. The upgrade fails to recognise
reality - Perl is installed with threads!
with OpenEXR or OpenMP I
On Sun, Nov 21, 2010 at 05:18:13PM +, David Southwell wrote:
On Sun, 21 Nov 2010 15:17:21 +
David Southwell da...@vizion2000.net wrote:
On Sun, 21 Nov 2010 12:12:11 +
David Southwell da...@vizion2000.net wrote:
I posted about this failure some time ago
Hi
I posted about this failure some time ago but have had no useful response. I
jhave also not heard from the maintainer so I thought another posting might be
helpful. I understand others have a similar problem.
Thanks in advance for any assistance
David
gmake[6]: Leaving directory
On Sun, 21 Nov 2010 12:12:11 +
David Southwell da...@vizion2000.net wrote:
I posted about this failure some time ago but have had no useful
response. I jhave also not heard from the maintainer so I thought
another posting might be helpful. I understand others have a similar
problem
On Sun, 21 Nov 2010 15:17:21 +
David Southwell da...@vizion2000.net wrote:
On Sun, 21 Nov 2010 12:12:11 +
David Southwell da...@vizion2000.net wrote:
I posted about this failure some time ago but have had no useful
response. I jhave also not heard from the maintainer
On Wed, Nov 17, 2010 at 01:38:30PM -0600, Greg Rivers wrote:
On Wed, 17 Nov 2010, David Southwell wrote:
Does anyone know how to fix this one
I'm seeing the same build failure, but only on FreeBSD 7.3. It
builds fine for me on FreeBSD 8.1.
Folks,
As most of you know
Hi
Thanks in advance for any help here:
David
__
Failure as follows:
config.status: creating include/gfx/config.h
gmake[1]: Entering directory
`/usr/ports/x11/fireflies/work/fireflies-2.07/libgfx/src'
c++ -c -O2 -fno-strict-aliasing -pipe -march=nocona
Hi
Does anyone know how to fix this one
Thanks in advance
david
gmake[6]: Leaving directory
`/usr/ports/multimedia/vlc/work/vlc-1.1.5/modules/misc/xml'
gmake[5]: Leaving directory
`/usr/ports/multimedia/vlc/work/vlc-1.1.5/modules/misc/xml'
gmake[5]: Entering directory
After latest upgrade to mysql and upgrading the mysql server according to the
instruction in UPGRADING akonadi, which depends upon mysql, has
started playing up.
Prior to upgrading the man mysql server all mails were
visible in kmail. Subjects remained visible but mail bodies have suddenly
on AMD64 Intel quad core Freebsd 7.2 p3
dns1# pkg_info |grep gcc
gcc-3.4.6_3,1 GNU Compiler Collection 3.4
gcc-4.2.5.20090325_5 GNU Compiler Collection 4.2
gcc-4.4.6.20101012 GNU Compiler Collection 4.4
gcc-4.5.2.20101028 GNU Compiler Collection 4.5
gccmakedep-1.0.2Create dependencies
On 31.10.2010 19:53 (UTC+1), David Southwell wrote:
on AMD64 Intel quad core Freebsd 7.2 p3
dns1# pkg_info |grep gcc
gcc-3.4.6_3,1 GNU Compiler Collection 3.4
gcc-4.2.5.20090325_5 GNU Compiler Collection 4.2
gcc-4.4.6.20101012 GNU Compiler Collection 4.4
gcc-4.5.2.20101028 GNU
Hi
What is happening here?
I have opengtl-0.9.14 installed on freebsd 7.2 p3 amd64 from ports.
Now when upgrading ports following a cvsup of the ports tree
#portupgrade -a
.
.
.
[terminates with:]
** Port marked as IGNORE: graphics/opengtl:
is marked as broken: does not build
**
1 - 100 of 447 matches
Mail list logo
