I have a 5.2.1 server which I need to add IP's to. When the provider
assigned me the IP's they also said use the netmask 255.255.255.240. I
added the IP's to my rc.conf as you can see below but they do not show up in
my ifconfig.
MY rc.conf:
# -- sysinstall generated deltas -- # Wed Nov 3
ifconfig_fxp0=inet 208.53.17X.8 netmask 255.255.255.0
^
ifconfig_fxp0=inet 208.53.17X.8 netmask 255.255.255.240
ifconfig_fxp0_alias0=inet 208.53.17X.2 netmask 255.255.255.240
^^
Netmask should be
Hi,
At random I will get this kernel panic
Does anyone have any idea what this means ??
Also how do I make the kernel auto reboot the system when there is a kernel
panic..
Thanks for the help!
Steven Adams [EMAIL PROTECTED]
DriftNet Web Services http://www.drifthost.com
I messed up something on myh primary server, where I run
dhcp. Since I did whatever-it-was, ssh takes at least two
minutes to get from NS1 (aka 'sage'), and anywhere else.
Only on sage can I type 'ping foo.org' and get an immediate
responce. On any other
I should have just left the IP's in untouched. I know that looks suspicious
but they are two different IP's one is lets say 178 and the other 179, they
arent used twice. But good catch.
From: Chris Knipe [EMAIL PROTECTED]
Reply-To: Chris Knipe [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject:
Sorry it was changed to text only..
The error is as follows (or go to http://drifthost.com/intertia-error.jpg)
===
Kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
Cupid= = 0; apic id = 00
Fault virtual address = 0x24
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
Copy and paste this link...and add one W to the front and you get a TV
ww.FreeFlatScreens.com/?r=1141739
Best regards, and Thank you
Daniel Jesperson
[Daniel Jesperson, 2004-11-05]
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
Copy and paste this link...and add one W to the front and you get a TV
ww.FreeFlatScreens.com/?r=1141739
Please note the
On Fri, Nov 05, 2004 at 03:11:57AM -0500, GRF . wrote:
I have a 5.2.1 server which I need to add IP's to. When the provider
assigned me the IP's they also said use the netmask 255.255.255.240. I
added the IP's to my rc.conf as you can see below but they do not show up
in my ifconfig.
Hi,
I downloded the FreeBSD and install it at my PC but i'm wondaring if FreeBSD is
supporting User Interface like WindowsX or Mac PC.
If yes, show me the place where i can see the stips to follow please.
Regards
Adel Al M'mari
UAE - Sharjah
P.O.Box-980
Hi,
Adel Al M'mari wrote:
Hi,
I downloded the FreeBSD and install it at my PC but i'm wondaring if FreeBSD is
supporting User Interface like WindowsX or Mac PC.
If yes, show me the place where i can see the stips to follow please.
The X-Window system can be installed to provide a GUI. Follow the
On Friday 05 November 2004 12:34, [EMAIL PROTECTED] wrote:
FreeBSD gnome.kenesh.kg 5.2-RELEASE FreeBSD 5.2-RELEASE #0:
Thu Nov 4 09:57:07 KGT 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERNEL i386
What means this message: kernel: arp: 192.168.10.3 is on rl1
but got reply from
I have a FreeBSD 5.3RC1 and Mandrake 10 Connected over NFS. Server is on
Mandrake and FreeBSD is only client. Transfer rate for files is great,
but scanning folders on the NFS mount is ubearably slow. CPU usage on
both machines is close to 0%, on Mandrake I can see a nfsd daemon or two
fired
I want my computer to speak to me, thus I installed the following:
# pkg_info | grep fest
festival+OGI-1.4.1_1 Text-to-speech system with OGI residual LPC synthesizer
festlex-cmu-1.4.1 CMU American English pronunciation dictionary for Festival
festlex-oald-1.4.1 Oxford Advanced Learner's
Karel Miklav wrote:
I have a FreeBSD 5.3RC1 and Mandrake 10 Connected over NFS. Server is on
Mandrake and FreeBSD is only client. Transfer rate for files is great,
but scanning folders on the NFS mount is ubearably slow. CPU usage on
both machines is close to 0%, on Mandrake I can see a
Experienced linux debian user, recently I smoothly moved to linux gentoo
(BSD compliant) AND to FreeBSD 5.2.1.
1) I want to tailor my freeBSD slice according to my machine (gentoo
experience is helpful!). Now, while i I know how to compile an
application in /usr/ports I cannot find sources of
Hi i have problem updating the portdb since i cvsup
portversion/portupgrade or anything will fail with same or similar msgs.
Im not certain how I can start
already tried portsdb -F but didnt make difference
any help or comment is welcome
flute# portsdb -uU
Updating the ports index ...
On 05/11/04 01:02 -0800, Daniel Jesperson wrote:
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
Just for the record, I did this and got all of my 8 referrals. I got
my free TV, *but I did not spam* to do it!!!
Hi,
I've downloaded the matrox linux drivers for the g550. Istalling the mga_hal.o in the
driver directoy wasn't enough, so I overwrited the mga_drv.o file with the linux one.
Starting X worked, BUT, it was not possible to get a console back. When quitting X I
get a blank and black screen. I
James Hong wrote:
Hi i have problem updating the portdb since i cvsup
portversion/portupgrade or anything will fail with same or similar msgs.
Im not certain how I can start
already tried portsdb -F but didnt make difference
any help or comment is welcome
flute# portsdb -uU
Updating the
On Friday 05 November 2004 06:49 am, Jakob Breivik
Grimstveit proclaimed:
[EMAIL PROTECTED] ~]# festival --tts a
Can't access NAS server (null)
Am I missing some settings? Packages?
Thanks in advance.
It looks like you have everything you need. However, it
also looks like you don't have
Daniel Jesperson wrote:
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
Copy and paste this link...and add one W to the front and you get a TV
ww.FreeFlatScreens.com/?r=1141739
Best regards, and Thank you
Vittorio [EMAIL PROTECTED] writes:
Experienced linux debian user, recently I smoothly moved to linux gentoo
(BSD compliant) AND to FreeBSD 5.2.1.
1) I want to tailor my freeBSD slice according to my machine (gentoo
experience is helpful!). Now, while i I know how to compile an
added
/usr/local/etc/pkgtools.conf
ENV['PKG_DBDRIVER'] = bdb_hash
ENV['PORTS_DBDRIVER'] = bdb_hash
and it worked!
Thanks!
James H
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Benjamin Thelen
Sent: Saturday, November 06, 2004 12:18 AM
To:
On Fri, 5 Nov 2004 13:29:07 +, Vittorio [EMAIL PROTECTED] wrote:
snip
Where are those sources?
/usr/src
2) The questions' question: where can I read what are the options I can
use with a certain source package and how can I use them when
make(-ing) the program?
Read the makefile or
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
snip
very sad...and some people still wonder how it is there can be so much
spam when so many profess to hate it.
I completly agree, though the company im
Quote:
The error is as follows (or go to http://drifthost.com/intertia-error.jpg)
===
Kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
Cupid= = 0; apic id = 00
Fault virtual address = 0x24
Fault code = supervisor read, page
Dear Gentlemen:
Where can I get XFree86-libraries-4.4.0_2 (required by kde-3.3.0)?
I clicked link Sources but recieved message:
Sorry, did not find the sources for ports/x11/XFree86-4-libraries only.
In the ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-4.10-release/x11/
directory I
Hello!
I am trying to upgrade my Apache. And get the following error message:
host # cd /usr/ports/www/apache13-modssl
host # make
Dependency error, please do: pkg_delete /usr/local/include/fnmatch.h was installed by
package heimdal-0.6.1
*** Error code 1
Stop in
How do I get syslog to append a CR to output when it's being sent to
a line printer on /dev/lpt0?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
Damm ... problems, problems ... ;-(
I've installed 5.3rc2 and I try to run X with a matrox g550, it works ... somehow now.
I'm running xfce4 with xorg 6.7.0. When I try to launch firefox or mozilla. I get the
following error
error: no running window found
To be able to run the apps, I
* Lloyd Hayes [EMAIL PROTECTED] [1109 16:09]:
Here's a new thread.
Naming the computer host?
I'm confused by this. As I understand it, I get a different DNS
assignment every time that I hook into the Internet from a different
location. Yet FBSD seems to want a permanent assignment which I
Hi,
For about 60 mbit use of bandwidth and max of 85, what
is a good value for HZ in the kernel config when i use device polling?
Btw, are the bge now also useable with device polling?
Bye,
Mipam.
___
[EMAIL PROTECTED] mailing list
On Fri, 5 Nov 2004 16:03:18 +0200, Oles Hnatkevych [EMAIL PROTECTED] wrote:
Hello!
I am trying to upgrade my Apache. And get the following error message:
use portupgrade
Regards
S.
--
Subhro Sankha Kar
School of Information Technology
Block AQ-13/1 Sector V
ZIP 700091
India
Oles Hnatkevych [EMAIL PROTECTED] writes:
Hello!
I am trying to upgrade my Apache. And get the following error message:
host # cd /usr/ports/www/apache13-modssl
host # make
Dependency error, please do: pkg_delete /usr/local/include/fnmatch.h was installed
by package heimdal-0.6.1
***
My original install of FreeBSD is on a 30 gig hard drive, I want to
move it to an 80 gig I now have, but i don't want to have to reinstall
everything since I've spent hours waiting for some ports to install.
So after googling and searching I found a few ideas of how to migrate
to a new hard drive
Daniel Jesperson wrote:
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
Copy and paste this link...and add one W to the front and you get a TV
ww.FreeFlatScreens.com/?r=1141739
Best regards, and Thank you
Daniel
-- quoting CHris Rich --
My original install of FreeBSD is on a 30 gig hard drive, I want to
move it to an 80 gig I now have, but i don't want to have to reinstall
everything since I've spent hours waiting for some ports to install.
So after googling and searching I found a
Hi,
I downloded the FreeBSD and install it at my PC but i'm wondaring if
FreeBSD is supporting User Interface like WindowsX or Mac PC.
If yes, show me the place where i can see the stips to follow please.
You are looking for X-windows managers.
When you install Xwindows - at least
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
Copy and paste this link...and add one W to the front and you get a TV
ww.FreeFlatScreens.com/?r=1141739
You realize they are just trying to build SPAM lists
On Fri, Nov 05, 2004 at 09:13:25AM -0600, CHris Rich wrote:
My original install of FreeBSD is on a 30 gig hard drive, I want to
move it to an 80 gig I now have, but i don't want to have to reinstall
everything since I've spent hours waiting for some ports to install.
[...]
If I do move it
On Fri, 5 Nov 2004 10:24:46 -0500 (EST), Jerry McAllister
[EMAIL PROTECTED] wrote:
Please help me, I'm trying to get a Free TV, check out this site, if
you refer 8 people you get a free TV or Flat screen monitor...
Copy and paste this link...and add one W to the front and you get a TV
In the last episode (Nov 05), Kevin A. Pieckiel said:
How do I get syslog to append a CR to output when it's being sent to
a line printer on /dev/lpt0?
Couple of options here:
o Tell your printer that eols are LF instead of CRLF (if it can be
configured to remember this on powerup)
o Log
On 2004-11-05 09:13, CHris Rich [EMAIL PROTECTED] wrote:
My original install of FreeBSD is on a 30 gig hard drive, I want to
move it to an 80 gig I now have, but i don't want to have to reinstall
everything since I've spent hours waiting for some ports to install.
So after googling and
hi all,
i am tried to cvsup my ports then portsdb -uU found portsdb update take a lot of CPU
resource (above 80%), then i just make the server hanging up, does it can limit the
resource usage for portsdb update? Thanks.
___
[EMAIL PROTECTED] mailing
--On Friday, November 05, 2004 08:41:27 AM -0500 Ed Budd
[EMAIL PROTECTED] wrote:
very sad...and some people still wonder how it is there can be so much
spam when so many profess to hate it.
I used to be a very active anti-spammer. Subscribed to nanae and the whole
nine yards. One day I
I am trying to install a Linksys 10/100/1000 gigabit network adapter on a
4.9 freebsd operating system, but the os is not detecting the nic; however,
when I install a 10/100 linksys nic it works fine. Please help me, I know
that it may be a simple answer or it also could be a little difficult;
Hi,
Thanks but that is actually what I tried ;-),
without success. The screen keeps black no signal
anymore. ctrl+alt FX can't get a console and even
the X display was black, and I was unable to get
working screen nor X or the console. I needed to
ssh from another workstation to
On 03 Nov Rob wrote:
Eric Schuele wrote:
However, F1 takes you to the ttyv I'm logged in to and this gives you
the opportunity to Ctrl-C my X session... leaving you standing in my
shell!
How do you start your X session?
It seems like you log in via one of the text terminals (ttyv0) and
How to get the best results from FreeBSD questions.
===
Last update $Date: 2004/09/19 02:40:48 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
Kris Kennaway wrote:
On Thu, Nov 04, 2004 at 06:07:57PM -0500, Bob Johnson wrote:
This is more of an announcement than a question, but:
In the past, I've noticed questions from people looking for ISO image
file torrents for FreeBSD. To see if there really is a demand for this,
I've set one up
Once I get it downloaded I will try to seed it for as long as I can
On Fri, 05 Nov 2004 12:03:28 -0500, Bob Johnson [EMAIL PROTECTED] wrote:
Kris Kennaway wrote:
On Thu, Nov 04, 2004 at 06:07:57PM -0500, Bob Johnson wrote:
This is more of an announcement than a question, but:
In
your best bet is to get a card that's natively supported by freebsd. i
have had good luck with d-link 802.11g cards that use the atheros
chipset, but any manufacturer's card(using atheros) should work the
same. these cards are pretty inexpensive, and you'll probably have a
lot better luck with
I have a test machine with FreeBSD-5.3 RC2. It only has 2 drives (ATA).
I am seeing this error (intermittently):
ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=3239915
ad0: FAILURE - WRITE_DMA timed out
Though the system seems to otherwise be working just fine.
This used to be a
On Tue, Oct 26, 2004 at 09:52:27AM -0700, Gary Kline wrote:
On Tue, Oct 26, 2004 at 12:29:08PM +0300, Giorgos Keramidas wrote:
On 2004-10-26 00:04, Loren M. Lang [EMAIL PROTECTED] wrote:
On Sun, Oct 24, 2004 at 12:45:55AM +0300, Giorgos Keramidas wrote:
On 2004-10-23 22:52, John Oxley
Dual-channel SATA 100 (two connectors) integrated with RAID 0 and 1
support
If I have 4 drives in the above, could I stripe two to each other and then
mirror those together? Or is it strip *or* mirror?
also, not sure if this is a no brainer, but would FreeBSD support that
resultant array?
On 11/05/04 01:22 PM, Forrest Aldrich sat at the `puter and typed:
I have a test machine with FreeBSD-5.3 RC2. It only has 2 drives (ATA).
I am seeing this error (intermittently):
ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=3239915
ad0: FAILURE - WRITE_DMA timed out
Though
Thought the list might benefit...
Brian Bobowski wrote:
Eric Schuele wrote:
When I have X/Fluxbox up and running, I can press
Ctrl+Alt+function-key
and get to any other ttyv. This is annoying to begin with but since
they prompt for pwds... not catastrophic. However, F1 takes you to the
I finished downloading it fine, so your end is probably working ok, I
will continue seeding to help anyone else who wants to grab it
On Fri, 5 Nov 2004 11:09:35 -0600, CHris Rich [EMAIL PROTECTED] wrote:
Once I get it downloaded I will try to seed it for as long as I can
On Fri, 05 Nov
There are only two channels so you can only have 2 drives in raid 1 or
0. Don't use 0 unless you don't care about your data.
You didn't specify the type of motherboard or SATA RAID chipset, but
all of those onboard RAID controllers are not true hardware raid (Host
raid) and require special
Sorry, I should have specified the system. This is an older Compaq
AP200. I've not idea what controller it's using on the motherboard, but
can try Googling to find out. The processor is 500mhz, and has a
reasonable amount of RAM.
Again, this problem I'm seeing on /dev/console is
On Fri, 5 Nov 2004, Scott Gerhardt wrote:
There are only two channels so you can only have 2 drives in raid 1 or 0.
Don't use 0 unless you don't care about your data.
You didn't specify the type of motherboard or SATA RAID chipset, but all of
those onboard RAID controllers are not true hardware
On Fri, 5 Nov 2004, Marc G. Fournier wrote:
On Fri, 5 Nov 2004, Scott Gerhardt wrote:
There are only two channels so you can only have 2 drives in raid 1 or 0.
Don't use 0 unless you don't care about your data.
You didn't specify the type of motherboard or SATA RAID chipset, but all of
those
How can I know I FreeBSD 4.9 supports SoundMax sound
cards and, if not, when will they be supported?
__
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com
___
[EMAIL PROTECTED]
You can get your ATA controller by looking for ATA in
/var/run/dmesg.boot.
And FTR, my problem is intermittent too, but seems to lock the system up
with partition corruption when the disk is under heavy load.
Good luck.
Lou
On 11/05/04 03:26 PM, Forrest Aldrich sat at the `puter and typed:
Marc G. Fournier wrote:
Dual-channel SATA 100 (two connectors) integrated with RAID 0 and 1
support
If I have 4 drives in the above, could I stripe two to each other and
then mirror those together? Or is it strip *or* mirror?
also, not sure if this is a no brainer, but would FreeBSD support
On Fri, Nov 05, 2004 at 07:17:51PM +1100, Steven Adams wrote:
Hi,
At random I will get this kernel panic
What kernel panic?
Also how do I make the kernel auto reboot the system when there is a kernel
panic..
It should automatically reboot unless you have DDB enabled, in which
case
On Friday 05 November 2004 04:15 pm, Andrei Iarus
proclaimed:
How can I know I FreeBSD 4.9 supports SoundMax sound
cards and, if not, when will they be supported?
You could either go to freebsd's website (freebsd.org), or
if you have a releace CD downloaded and burned, you could
check the
I'm accustomed to work with postgresql under linux both debian and gentoo.
Now on my pentium 3 box under freeBSD 5.2.1 I've just compiled the following
ports:
postgresql7
postgresql7-client
postgresql7-opt
In /usr/local/etc/rc.d I find 010.pgsql.sh to start the service but
Im not quite sure what you mean by that..
Is that an env variable, make file or shell variable.. ?
Steven Adams [EMAIL PROTECTED]
DriftNet Web Services http://www.drifthost.com
Home: +61 2 94274857
Fax: +61 2 94274857
Mobile +61 (0) 404 085644
-Original Message-
From: Subhro
On Fri, 5 Nov 2004 13:29:07 +, Vittorio [EMAIL PROTECTED] wrote:
1) I want to tailor my freeBSD slice according to my machine (gentoo
experience is helpful!). Now, while i I know how to compile an
application in /usr/ports I cannot find sources of the base system I
had to install when
On Fri, 05 Nov 2004 15:14:33 +0100, Didier Wiroth
[EMAIL PROTECTED] wrote:
I'm running xfce4 with xorg 6.7.0. When I try to launch firefox or mozilla. I get
the following error
error: no running window found
To be able to run the apps, I need to:
1) xhost +local
2) su
3) type mozilla or
Has anyone succesfully cloned a windows XP hard drive with dd? I heard
there were problems specifically with XP drives, that they required a
drive ID number to be changed or something silly like that.
___
[EMAIL PROTECTED] mailing list
Greetings! I've been a FreeBSD user for a few years now, off and on.
After my last harddrive dumped on me, I decided to stick with FreeBSD
as my main OS. I work as an PC/Net technician/admin and know the
console and server ends of FreeBSD rather well at this point. I've
never been much into
Guys,
I don't know if my mail from last night (Friday, localtime)
got thru or not. Part of sendmail is bolloxed too... I
see my /var/log/maillog filling up, but unable to resolve
mail from freebsd.org. Or anywhere.
Anyhow, last night thngs on my
On Fri, Nov 05, 2004 at 01:29:07PM +, Vittorio wrote:
Experienced linux debian user, recently I smoothly moved to linux gentoo
(BSD compliant) AND to FreeBSD 5.2.1.
1) I want to tailor my freeBSD slice according to my machine (gentoo
experience is helpful!). Now, while i I know how to
We haven't used dd directly but have used g4u.
g4u (ghost for unix) is a boot-floppy/CD that allows one to easily
clone PC hard disks by using FTP. This is often done to deploy a common
setup on a number of PCs. The floppy/CD offers two functions: it uploads
the compressed image of a local hard
What will happen to the file system and boot manager when i am
upgrading from 5.3b7 amd64 to current ?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
* [EMAIL PROTECTED] [EMAIL PROTECTED] [1153 22:53]:
In /usr/local/etc/rc.d I find 010.pgsql.sh to start the service but
/usr/local/etc/rc.d/010.pgsql.sh start
doesn't look to do anything.
if I su - pgsql then try to createdb an error of missing server pops
up.
Could you please help in a
It doesn't matter what name you give the machine. Just add that name
to /etc/hosts as the loop back address' lookup name.
I refer to this computer as traveler2. It is the 2nd laptop that I had
purchased. Everything before had been desktops. I have traveler2 and
traveler4 in the truck with me.
I seem to have 4 PCMCIA WiFi cards which do not work with FreeBSD. I'm
getting ads from eCost.com for these cards selling for $5.
(Shipping costs more then the card, and I have purchased from this
company before.)
Which cards work best? Preferably a G card.
I'd like to hear from people who are
Ive got gaim and friends installed from ports
[EMAIL PROTECTED] ls -al /var/db/pkg/ | grep -i gaim
drwxr-xr-x2 root wheel 512 Oct 28 23:13 gaim-1.0.2
drwxr-xr-x2 root wheel 512 Nov 5 21:16 gaim-encryption-2.31_2
drwxr-xr-x2 root wheel 512 Oct 28 23:13
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jason wrote:
| Ive got gaim and friends installed from ports
| [EMAIL PROTECTED] ls -al /var/db/pkg/ | grep -i gaim
| drwxr-xr-x2 root wheel 512 Oct 28 23:13 gaim-1.0.2
| drwxr-xr-x2 root wheel 512 Nov 5 21:16
I am newbie running FreeBSD 5.2.1 with a custom kernel. Not any major
modifications, I just commented out a few devices which I do not have
and copied over a few items from the Notes file.
I just ran freebsd-update to pick up security patches. It fetched and
installed without any problems.
I inherited a 400 MHz Pentium II with 128MB of RAM
and a 20GB HD.
Is this an adequate configuration to run 5.2.1, or
do I need to add memory?
Jay O'Brien
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On Fri, Nov 05, 2004 at 08:49:56PM -0800, Jay O'Brien wrote:
I inherited a 400 MHz Pentium II with 128MB of RAM
and a 20GB HD.
Is this an adequate configuration to run 5.2.1, or
do I need to add memory?
It all depends what you want to do with it...it's the applications you
run that take
Kris Kennaway wrote:
On Fri, Nov 05, 2004 at 08:49:56PM -0800, Jay O'Brien wrote:
I inherited a 400 MHz Pentium II with 128MB of RAM
and a 20GB HD.
Is this an adequate configuration to run 5.2.1, or
do I need to add memory?
It all depends what you want to do with it...it's the
Hi,
I run FreeBSD 5.2.1 with the following hardware
Acer Server: Altos
LSI Megaraid with 5x 36 gig scsi on raid 5.
Dual xeon cpu's
1GIG ECC Ram
2x 250GIG IDE Drives
We host a couple or sites on this server (not very big sites). My server
load is always around 0.90 - 3.40. Sometimes
On Nov 5, 2004, at 10:17 PM, Jay O'Brien wrote:
I thought I would bring this old machine (inherited from my 89 yr old
m-i-l who passed away in August) on 5.2.1 to get a feel for it;
you may want to put 5.3 on it. Supposed to release this weekend
according to a note earlier.
I only use FreeBSD
In the last episode (Nov 06), Steven Adams said:
We host a couple or sites on this server (not very big sites). My
server load is always around 0.90 - 3.40. Sometimes it will jump up
to 10-15.
At random it will jump up to 30-40 load and I wont even be able to
get to the server, typing
Hi Dan,
I disabled one of my clients web pages ( the one that gets the most hits
)and its gone down to 130MB swap used and staying there. The clients site is
just a small site with one page that shows one gallery but gets a lot of
hits...
It now has 140MB free.. but It seems as if it slowly
On Fri, Nov 05, 2004 at 10:17:59PM -0700, Jay O'Brien wrote:
Kris Kennaway wrote:
On Fri, Nov 05, 2004 at 08:49:56PM -0800, Jay O'Brien wrote:
I inherited a 400 MHz Pentium II with 128MB of RAM
and a 20GB HD.
Is this an adequate configuration to run 5.2.1, or
do I need to add
I've been trying to configure my first custom kernel according to the
Handbook and looks that I got error in my configuration file, Would
somebody please help me out?
Thank you in advance.
++
Here is my custom configuration file:
# GENERIC -- Generic
Jian Guang Xu wrote:
I've been trying to configure my first custom kernel according to the
Handbook and looks that I got error in my configuration file, Would
somebody please help me out?
Thank you in advance.
++
Here is my custom configuration file:
Danny MacMillan wrote:
On Fri, Nov 05, 2004 at 10:17:59PM -0700, Jay O'Brien wrote:
Kris Kennaway wrote:
It all depends what you want to do with it...it's the applications you
run that take up most of the memory. 128MB is a bit on the small side
if you're going to be doing memory-heavy
On Nov 6, 2004, at 12:32 AM, Jay O'Brien wrote:
Chad
Thanks, folks! I hadn't considered 5.3, but as this is really only a
test bed, I might as well go for it. I see 5.3-RC2 is available, I'll
grab
it and burn an ISO CD.
Wait for 5.3-RELEASE
It is supposed to be out this weekend. A little bird
Hi friends
I am a student in Romania, at the Petrol and Gas
university of Ploiesti
these guys forbid us to update FreeBSD via cvsup
can you write that on a big site, somewhere where
anyone can see?
you can check if you want...
thankes
__
Do You
anyone know any good howtos on getting Cpanel going on FreeBSD 5.2?
_
Take advantage of powerful junk e-mail filters built on patented Microsoft®
SmartScreen Technology.
On 2004-11-05 21:17, Jay O'Brien [EMAIL PROTECTED] wrote:
Kris Kennaway wrote:
On Fri, Nov 05, 2004 at 08:49:56PM -0800, Jay O'Brien wrote:
I inherited a 400 MHz Pentium II with 128MB of RAM and a 20GB HD.
Is this an adequate configuration to run 5.2.1, or do I need to add
memory?
It all
100 matches
Mail list logo
