On Wed, 13 Oct 2010 13:24:26 +0100
David Southwell da...@vizion2000.net wrote:
Tried that but no good - it still seems to goof up. I recall it used
to work many versions ago but it may not have been picked up on a
regression test.
It works for me. Which port is it failing on
Hi,
I'm trying to install Resin together with Apache and according to all
documentation I can find I'm supposed to compile the mod_caucho and include
this in the Apache httpd.conf, but I can't find any reference to mod_caucho
in my ports, system or compile options.
Is the documentation outdated
To install Flash for Firefox, I use this HOWTO
http://forums.freebsd.org/showpost.php?p=33673postcount=1
I have used Linux Base Port 10 but now I use Linux Base Port 8 because I can
use ICA Client, Citrix (see BSD Mag from last month).
Flash works well on Firefox with both Linux Base Port, but
Hello,
I was facing a problem in some Makefile/shell-scripting and finally I
could nail it down:
when you set the environment variable GZIP to something, for example to
let it point to gzip itself, it tries 1st to unpack this file:
$ GZIP=/usr/bin/gzip export GZIP
$ $GZIP -dc source.tar.gz |
I think you have the same error than the one described here :
https://forums.freebsd.org/showthread.php?t=10460
There is a security issue for Linux-Pango. That is why the Portaudit tool,
won't let you install this port.
But you can nevertheless install the port :
- Add the following line to
On Thu, Oct 14, 2010 at 10:16 AM, Andy Wodfer wod...@gmail.com wrote:
Hi,
I'm trying to install Resin together with Apache and according to all
documentation I can find I'm supposed to compile the mod_caucho and include
this in the Apache httpd.conf, but I can't find any reference to
On Thu, Oct 14, 2010 at 1:06 PM, Christer Solskogen
christer.solsko...@gmail.com wrote:
On Thu, Oct 14, 2010 at 10:16 AM, Andy Wodfer wod...@gmail.com wrote:
Hi,
I'm trying to install Resin together with Apache and according to all
documentation I can find I'm supposed to compile the
Le 13/10/2010 22:25, Elliot Finley a écrit :
we did this with DSL customers. But instead of using a unique gateway for
each Client, just use IP Unnumbered and proxy arp for your loopback
interface.
I was about to say that this solution seemed extremely sensitive to
spoofing. But I figured
On Thu, Oct 14, 2010 at 9:16 AM, Jerome Herman jher...@dichotomia.frwrote:
Le 13/10/2010 22:25, Elliot Finley a écrit :
we did this with DSL customers. But instead of using a unique gateway for
each Client, just use IP Unnumbered and proxy arp for your loopback
interface.
I was about to
Matthias Apitz g...@unixarea.de writes:
Hello,
I was facing a problem in some Makefile/shell-scripting and finally I
could nail it down:
when you set the environment variable GZIP to something, for example to
let it point to gzip itself, it tries 1st to unpack this file:
$
Hi:
I'm up against configuring a number of different systems with host-host
IPSec AH-only. The systems use different versions of racoon.
Questions:
- Must the key lifetime be the same in both ends?
- Can key lifetime be configured per host-host connection?
Thanks, Erik
--
Erik Nørgaard
El día Thursday, October 14, 2010 a las 10:39:13AM -0400, Lowell Gilbert
escribió:
Matthias Apitz g...@unixarea.de writes:
Hello,
I was facing a problem in some Makefile/shell-scripting and finally I
could nail it down:
when you set the environment variable GZIP to something, for
On Thu, 14 Oct 2010 10:36:59 +0200
Matthias Apitz g...@unixarea.de wrote:
Hello,
I was facing a problem in some Makefile/shell-scripting and finally I
could nail it down:
when you set the environment variable GZIP to something, for example to
let it point to gzip itself, it tries 1st
Having trouble viewing this email ?
http://www.articque.com/mailing/2010/101011-geocampus-en/index.html?utm_source=articqueutm_medium=emailutm_campaign=geocampus-en
=
GEOCAMPUS
An initiative of ARTICQUE Solutions Group
On Thu, 2010-10-14 at 16:48 +0200, Matthias Apitz wrote:
El día Thursday, October 14, 2010 a las 10:39:13AM -0400, Lowell Gilbert
escribió:
Matthias Apitz g...@unixarea.de writes:
Hello,
I was facing a problem in some Makefile/shell-scripting and finally I
could nail it down:
On Thu, Oct 14, 2010 at 3:07 PM, Andy Wodfer wod...@gmail.com wrote:
On Thu, Oct 14, 2010 at 1:06 PM, Christer Solskogen
christer.solsko...@gmail.com wrote:
On Thu, Oct 14, 2010 at 10:16 AM, Andy Wodfer wod...@gmail.com wrote:
Hi,
I'm trying to install Resin together with Apache and
I have a single box on which I would like to run openvpn, smtp (postfix,
dspam, greylist, clamav), imap (dovecot) apache22 and bind. This box also
acts as a network gateway so it would give an attacker carte blanche to
the internal nets if it was compromised, which makes me nervous. The plan
is
Matthias Apitz g...@unixarea.de writes:
Why?
$ FIX=foo export FIX
$ env | fgrep FIX
FIX=foo
Sorry; I'm not sure how I fooled myself on that -- I didn't keep the
example I tested on..
___
freebsd-questions@freebsd.org mailing list
Christer Solskogen wrote:
[snip]
Both Apache (port 80) and Resin3.1 (port 8080) runs fine alone.
You probably have that module already installed. It comes with
www/resin3 according to the Makefile.
Don't think so. locate (updated) and find only shows these:
./tmp/caucho
Le 14/10/2010 16:33, Nathan Vidican a écrit :
On Thu, Oct 14, 2010 at 9:16 AM, Jerome Hermanjher...@dichotomia.frwrote:
Le 13/10/2010 22:25, Elliot Finley a écrit :
we did this with DSL customers. But instead of using a unique gateway for
each Client, just use IP Unnumbered and
On Thu, 14 Oct 2010, Matthew Law wrote:
I have a single box on which I would like to run openvpn, smtp (postfix,
dspam, greylist, clamav), imap (dovecot) apache22 and bind. This box also
acts as a network gateway so it would give an attacker carte blanche to
the internal nets if it was
Le 14/10/2010 16:26, Erik Norgaard a écrit :
Hi:
I'm up against configuring a number of different systems with
host-host IPSec AH-only. The systems use different versions of racoon.
Questions:
- Must the key lifetime be the same in both ends?
In theory both ends are supposed to negotiate
I *think* PVLANs are open standard, other vendors may support. DHCP snooping
and/or ACL's can address rogue issue.
Used Ci$co hardware is cheap. Check out Nework Hardware Resale or just
google. 2960's support PVLANs, but only significant to each switch. If you
want distributed PVLANs, 3750's
On 10/14/10 13:09, Tim Kellers wrote:
On 10/14/10 12:11, Christer Solskogen wrote:
On Thu, Oct 14, 2010 at 3:07 PM, Andy Wodferwod...@gmail.com wrote:
On Thu, Oct 14, 2010 at 1:06 PM, Christer Solskogen
christer.solsko...@gmail.com wrote:
On Thu, Oct 14, 2010 at 10:16 AM, Andy
On Thu, Oct 14, 2010 at 6:11 PM, Christer Solskogen
christer.solsko...@gmail.com wrote:
Both Apache (port 80) and Resin3.1 (port 8080) runs fine alone.
You might need to have apache[2|22] installed first.
Apache was installed first.
/Andy
___
Running most recent FreeBSD 8.1-STABLE on a P45/ICH10 based ASUS
motherboard. There is no sound.
dmesg output reports two HDA devices, one located on a Radeon HD4830
graphics board and one located on the ICH10 chipset.
Setting hw.snd.default_unit=1 in /etc/sysctl.conf or manually does not
On 10/10/10, Bruce Cran br...@cran.org.uk wrote:
On Sunday 10 October 2010 21:49:30 b. f. wrote:
If it has an i8254, that can also be used in one-shot mode if
hint.attimer.0.timecounter=0 is used, since r212778.
Thanks, I didn't know about that. After enabling it things are quite
different:
On Thu, 14 Oct 2010 19:43:36 +
b. f. bf1...@googlemail.com wrote:
I'm not sure what is going on here: if you set
hint.attimer.0.timecounter=0 and kern.eventtimer.timer=i8254 in
/boot/loader.conf, then the system should try to use the i8254 in
one-shot mode, unless you've specifically set
On 10/14/10 12:11, Christer Solskogen wrote:
On Thu, Oct 14, 2010 at 3:07 PM, Andy Wodferwod...@gmail.com wrote:
On Thu, Oct 14, 2010 at 1:06 PM, Christer Solskogen
christer.solsko...@gmail.com wrote:
On Thu, Oct 14, 2010 at 10:16 AM, Andy Wodferwod...@gmail.com wrote:
Hi,
I'm trying to
Hi list!
I did a strange observation yesterday night. The CPU usage reported by
top doesn't match what is indicated under it. I was seeing around 80-90%
user, 5% system, 1% interrupt and 10% idle. But the process details
under it doesn't match. mysqld was taking around 250% (WCPU) with a few
On 14 October 2010 19:19, doug d...@fledge.watson.org wrote:
On Thu, 14 Oct 2010, Matthew Law wrote:
I have a single box on which I would like to run openvpn, smtp (postfix,
dspam, greylist, clamav), imap (dovecot) apache22 and bind. This box also
acts as a network gateway so it would give
I tried my first minor build of an unusual program [that only a
CLI geek like me would use]. But can't find the mkmf that I've
used for years. I haven't found anything comparable in the
Linux world. Has anybody else out there gotten our old '93 src
mkmf
On Thu, 2010-10-14 at 16:30 -0700, Gary Kline wrote:
I tried my first minor build of an unusual program [that only a
CLI geek like me would use]. But can't find the mkmf that I've
used for years. I haven't found anything comparable in the
Linux world. Has anybody
On Thu, Oct 14, 2010 at 04:49:42PM -0700, Devin Teske wrote:
On Thu, 2010-10-14 at 16:30 -0700, Gary Kline wrote:
I tried my first minor build of an unusual program [that only a
CLI geek like me would use]. But can't find the mkmf that I've
used for years. I haven't found
On Thu, Oct 14, 2010 at 04:30:32PM -0700, Gary Kline wrote:
I tried my first minor build of an unusual program [that only a
CLI geek like me would use]. But can't find the mkmf that I've
used for years. I haven't found anything comparable in the
Linux world. Has
On Fri, Oct 15, 2010 at 03:00:17AM +0200, Roland Smith wrote:
On Thu, Oct 14, 2010 at 04:30:32PM -0700, Gary Kline wrote:
I tried my first minor build of an unusual program [that only a
CLI geek like me would use]. But can't find the mkmf that I've
used for years. I haven't
when i hit the command gedit :
it show
Fontconfig error: Cannot load default config file
(gedit:2858): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor
with dbus name org.gtk.Private.HalVolumeMonitor is not supported
(gedit:2858): GVFS-RemoteVolumeMonitor-WARNING **: remote
37 matches
Mail list logo