Hello,
I wonder whether Syba PCI to Serial 4-port Controller Card based on
NM9845CV (costs $27 @ newegg) is supported by FreeBSD. The NetMos NM9845
Quad UART is supported by puc(4), so is Syba the same chip or different?
Thanks,
Alex
___
On Tue, 30 Nov 2004, 22:39 +0800, Irvin Piraman wrote:
This has been an open issue since 5.2.1 and still present on
5.3-RELEASE. It usually works for when I select safe mode during
installation. If not try using with ACPI disabled. Once you are
finished with the install you'll have to do some
Hello,
I have a computer (x86 with one IDE drive) which I would like to host both
FreeBSD and Linux. I installed Linux there, and it works fine. I then
tried to install 5.3-RELEASE from the CD, but the installer failed to find
the hard drive and locked with the error message
ata0-master:
Hi,
I am looking for a single-CPU (Intel or AMD) board which supports SATA and
console redirection for moderate price (say, less than $250). What I have
found so far are Intel entry server boards SE7210TP1 and S875WP1. Does
anybody have any experience with them? In particular, I am wondering
Hello,
After recent reinstallation of X I cannot use Russian layout anymore. With
the old release (4.1.0), I had two lines in the XF86Config file which did
the job:
Option XkbLayout ru
Option XkbOptions grp:shift_toggle
They installed the map with columns 1,2 filled
]
[mailto:[EMAIL PROTECTED] On Behalf Of Scott Mitchell
Sent: 09 October 2003 17:48
To: Alexey Koptsevich
Cc: [EMAIL PROTECTED]
Subject: Re: problem with aue card
On Thu, Oct 09, 2003 at 03:23:15AM -0400, Alexey Koptsevich wrote:
Hi,
I have a problem with the network card Linksys USB100TX
Hi,
My reply is late, but anyway: you can modify ~/.vnc/xstartup to include or
refer to your .xinitrc.
Best,
Alex
On Tue, 5 Aug 2003, stan wrote:
I'm trying to set up vnc on a STABLE machine.
I've built tightvnc from the ports, and run vncpassword to create a
password. Then I run
Hello,
I have a problem with the remote kernel install. I have cvsup'ed, built
and installed the system (-CURRENT) on one host, then mounted its /usr/src
and /usr/obj to another host (running 5.1-RELEASE). When I try to install
the kernel on the second host (even the same kernel which was
Hi,
I have a problem with the network card Linksys USB100TX. The hardware
itself is known to be working, but not under FreeBSD.
Here is dmesg:
Oct 8 21:10:39 pyosik kernel: aue0: LINKSYS Inc. LINKSYS USB Adapter, rev 1.10/1.01,
addr 2
Oct 8 21:10:40 pyosik kernel: aue0: Ethernet address:
Hi,
I would like to use FreeBSD machine as a serial console to another FreeBSD
machine. Server part is described in the Handbook, but I have found
nothing about client part. Which program should I use for terminal
emulation? How can I make, for instance, xterm to communicate to the
serial port?
Thanks everybody for suggestions!
Just a question, why not just use telnet?
Because the system is not set up there yet, and I do not want to search
for a monitor just for this purpose.
Alex
___
[EMAIL PROTECTED] mailing list
Hello,
I have got to the same idea today and -- what a luck -- this topic is
already dscussed on FreeBSD list! How fast should be the server to be able
to perform this task? For instance, would PII/400MHz/128Mb be enough? Do
different cards (meteor/bktr) consume CPU power differenly, or about
Mark,
Is it possible to record video under FreeBSD? Which card should I buy for
that? Is multicasting can be done using combination of available software,
or some programming required?
For serious digital recording, I would point you towards hardware
MPEG2 compression. FreeBSD does
Hello,
What does mean Giant in the following output of 'top'?
It is not documented in the man.
80216 username1310 53408K 45332K *Giant 1 7:55 77.05% 77.05%
communicator-linux-
Thanks,
Alex
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the
Hello,
I have problems with installation of 5.0 from sources. I give a command
make installworld DESTDIR=/nroot/ on the running system. The process
fills up 250 Mb on /nroot, 8.7 Gb on /nroot/usr and 633 Mb on
/nroot/var, and stops by the following reason:
=== sbin/restore
install -s -o root -g
Hello,
I would like to make installworld to some directory other than /, e.g.,
to directory /new, while the old system is working. The only way to do
that which I can think of is
- copy /, /usr and /var to /new
- chroot /new
- make installworld from there
Is there more easy/elegant way?
Hello,
I have just had a problem. Some process have filled /var. Lpd spool
directories were really huge, so I thought lpd was the reason, stopped it
and removed all print tasks from its spool directories. But df still
showed that /var is 109% full. I tried lsof|grep var, it showed nothing
Hello,
Are there any restrictions on the number of network interfaces supported
by kernel? I need at least 6.
Thanks,
Alex
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
18 matches
Mail list logo