On 4/30/05, Roldán [EMAIL PROTECTED] wrote:
hello list;
i have a problem configuring xf86 in my pc, i have a Intel Desktop Board
D915GAG, that have a Intel 915G Chipset, a Intel High Definition Audio
subsystem using the Realtek ALC860 audio codec and a Intel(r) GMA900 onboard
graphics
On Apr 8, 2005 12:00 PM, WOLOSCHAK, FRANK, JR (FRANK)
[EMAIL PROTECTED] wrote:
Good Morning,
I am having problems installing FreeBSD 5.3. It appears that the installation
options do not include: Configure XFree86 Server and Configure XFree86
Desktop. I am aware that version 5.3 now uses
I'm jumping into this late but this guy screams TROLL and i had to put
my comments in..
On Tue, 22 Mar 2005 10:25:14 +0100, Anthony Atkielski
[EMAIL PROTECTED] wrote:
Freminlins writes:
On a different OS.
Exactly. With _identical_ hardware. So if the hardware ran under the
other OS,
While reading updating I see this:
20050227:
The default world build no longer supports running on an
80386 CPU. In order to build a world for an 80386 CPU, one
needs to set CPUTYPE=i386 in /etc/make.conf.
does this mean that 80486's and above don't need to set it? or do
Trying to compile mysqlcc from source (ports didn't work) and it says
install a version of Qt
[EMAIL PROTECTED] [/usr/X11R6/include] pkg_info | grep qt
qt-3.3.3_2 Multiplatform C++ application framework
[EMAIL PROTECTED] [/usr/X11R6/include]
So that should mean I have qt installed
I am setting up an ftp server for a few friends using pro ftp. I need
to implement restrictions based on usernames.
Here is what I want: an account for being able to only browse the ftp
site, an account for uploading, and an account for downloading based
on the user.
After googling and searching
I've searched the ports on freebsd.org googled around and still can't
find where to compile quanta, am I overlooking something obvious?
THanks in advance
--
Regards
___
[EMAIL PROTECTED] mailing list
make config works without having to make clean or make rmconfig or anything
--
Regards
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Sat, 11 Dec 2004 16:43:26 +0100, Marcel de Reuver
[EMAIL PROTECTED] wrote:
I've searched the ports on freebsd.org googled around and still can't
find where to compile quanta, am I overlooking something obvious?
FreeBSD 5.3-Stable
whereis quanta
quanta: /usr/ports/www/quanta
On Wed, 8 Dec 2004 12:22:53 -0800, Vonleigh Simmons
[EMAIL PROTECTED] wrote:
Since you didn't mention which mysql version you are using..I will say
this.
In the /usr/ports/UPDATING...there is a paragraph.
20041031:
AFFECTS: users of databases/mysql40-server
AUTHOR: [EMAIL
Peter has managed to get it compiled on FreeBSd5.3,
however when run a yabasic demo program that uses
GTK-Server, I get an error message that library
nss_dns.so.1 is missing.
I have searched the ports tree and found references
to this in files in these locations...
eshop1# grep -r -i
On 07 Dec 2004 14:25:54 +, Peter N. M. Hansteen [EMAIL PROTECTED] wrote:
Simon Burke [EMAIL PROTECTED] writes:
Does anyone know if it is broken? or how i can get an openoffice
release installed, as 1.0 is apparentlyu broken according to ports and
1.1 wont compile sucessfully.
No it's
On Tue, 7 Dec 2004 19:58:23 -0200, Paulo Fonseca Jr.
[EMAIL PROTECTED] wrote:
Hi,
I tried to configure my kernel including device pcm to set soundmax card on
P4SP-MX SE motherboard but config not runs ok: device pcm is unknown.
Somebody who already installed this device on ASUS motherboard
On Fri, 3 Dec 2004 15:11:08 -0600, Joshua Lokken
[EMAIL PROTECTED] wrote:
On Fri, 03 Dec 2004 21:33:07 +0100, Kiffin Gish [EMAIL PROTECTED] wrote:
After doing a clean install of FreeBSD and running sysinstall, for some
reason XFree86 is missing. I thought I did an install of everything, but
snip
Mysql, Apache, PHP - which I need to test out the CMS software
Just recently I installed Apache2, then PHP 3.9.2 and MySQL 4.0
only to find I had not got support for MySQL compiled into PHP.
There must be some logical methods to ensure that each package
has the dependancies it
On Fri, 26 Nov 2004 01:53:11 -0800, Kevin Smith [EMAIL PROTECTED] wrote:
I am able to mount my windows partition manually by either:
mount -t ntfs /dev/ad0s1 /windows
or by putting an entry in by /dev/fstab that looks like:
/dev/ad0s1 /windows ntfs ro
I personally like qmail, we use it on our mail server, and like you we
didn't want to give system accounts so we did it with a mysql patch.
It took awhile to get up and running but now that it is running we
have a php script which handles user management, etc.
www.lifewithqmail.org is a good
I'm trying to upgrade from 5.3RC1 to 5.3-RELEASE i cvsupped the src
following the instructions given by Adam Smith(?) in a recent thread.
I've read the handbook pages and some other things on the web on
upgrading your system
buildworld completes no problem, but when i try do a make buildkernel
On Fri, 19 Nov 2004 18:46:38 +0200, Giorgos Keramidas
[EMAIL PROTECTED] wrote:
On 2004-11-19 10:27, CHris Rich [EMAIL PROTECTED] wrote:
I'm trying to upgrade from 5.3RC1 to 5.3-RELEASE i cvsupped the src
following the instructions given by Adam Smith(?) in a recent thread.
I've read
Hrmm perhaps how do I check this?
On Fri, 19 Nov 2004 17:51:57 +0100, Ruben de Groot [EMAIL PROTECTED] wrote:
On Fri, Nov 19, 2004 at 10:27:05AM -0600, CHris Rich typed:
I'm trying to upgrade from 5.3RC1 to 5.3-RELEASE i cvsupped the src
following the instructions given by Adam Smith
I think you accidentally cvsupped 4.x sources. perl is not required by
any part of the 5.x world/kernel build.
regards,
Ruben
Yes this is what i did do, what do i put in my supfile to get 5.x sources?
*default release=cvs tag=RELENG_5_3
that perhaps? or do you recommend
On Fri, 19 Nov 2004 13:40:48 -0800, Kris Kennaway [EMAIL PROTECTED] wrote:
On Fri, Nov 19, 2004 at 10:57:01AM -0600, CHris Rich wrote:
I think you accidentally cvsupped 4.x sources. perl is not required by
any part of the 5.x world/kernel build.
regards,
Ruben
When i try to install some extra things from ftp using
/stand/sysinstall i keep getting unable to extract distribution try
again? of course i try again and it still doesn't work. When I first
tried to install from ftp it gave me an error that 5.3RC1 could not be
found on server..so in the options
City
PIN 700091
India
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of CHris Rich
Sent: Thursday, November 18, 2004 21:10
To: [EMAIL PROTECTED]
Subject: Trying to install from ftp
When i try to install some extra things from ftp using
/stand
Yes I am doing it as root and my intelligence can't be insulted, I've
done dumber things
On Thu, 18 Nov 2004 10:20:29 -0600, Conrad J. Sabatier [EMAIL PROTECTED]
wrote:
On Thu, 18 Nov 2004 09:40:08 -0600, CHris Rich [EMAIL PROTECTED]
wrote:
When i try to install some extra things from ftp
I've tried using passive and still no luck, once i can get in front of
the box I will see what I can do with it (perhaps I need to set some
port forwarding up)
On Thu, 18 Nov 2004 10:21:23 -0600, Conrad J. Sabatier [EMAIL PROTECTED]
wrote:
On Thu, 18 Nov 2004 10:09:36 -0600, CHris Rich [EMAIL
It's in the modem, it's a speedstream 5200 which acts as a firewall, I
do have port forwarding set up so I can ssh into it but not sure about
ftp.
On Thu, 18 Nov 2004 10:49:38 -0600, Conrad J. Sabatier [EMAIL PROTECTED]
wrote:
On Thu, 18 Nov 2004 10:30:27 -0600, CHris Rich [EMAIL PROTECTED
I want to use the du command to check on the sizes of files in a
directory, but i want the output to be put into a text file so I can
look at it later.
I did some search on google, and found nothing that applied.
Searched other places (lists and things) and couldn't find what i was
looking for,
Actually no I'm not building from the ports collection when I try to
build from the ports i get a:
Port is broken and it stops
On Sat, 6 Nov 2004 22:44:41 -0600, Conrad J. Sabatier [EMAIL PROTECTED] wrote:
On Sat, 6 Nov 2004 17:55:15 -0600, CHris Rich [EMAIL PROTECTED]
wrote:
I am trying
I am trying to compile gdk-pixbuf-0.11.0 but i get an error saying
lgmodule not found.
After googling for awhile the most i have been able to find out about
it is that maybe it has something to do with gnome. Does anyone know
what lgmodule is?
/usr/bin/ld: cannot find -lgmodule
*** Error code 1
My original install of FreeBSD is on a 30 gig hard drive, I want to
move it to an 80 gig I now have, but i don't want to have to reinstall
everything since I've spent hours waiting for some ports to install.
So after googling and searching I found a few ideas of how to migrate
to a new hard drive
Once I get it downloaded I will try to seed it for as long as I can
On Fri, 05 Nov 2004 12:03:28 -0500, Bob Johnson [EMAIL PROTECTED] wrote:
Kris Kennaway wrote:
On Thu, Nov 04, 2004 at 06:07:57PM -0500, Bob Johnson wrote:
This is more of an announcement than a question, but:
In
I finished downloading it fine, so your end is probably working ok, I
will continue seeding to help anyone else who wants to grab it
On Fri, 5 Nov 2004 11:09:35 -0600, CHris Rich [EMAIL PROTECTED] wrote:
Once I get it downloaded I will try to seed it for as long as I can
On Fri, 05 Nov
for suggestions
On Fri, 29 Oct 2004 15:44:28 -0500, CHris Rich [EMAIL PROTECTED] wrote:
Ah I love this mailing listthanks for the suggestions will try
them as soon as possible.
On Fri, 29 Oct 2004 12:35:32 -0700, Kris Kennaway [EMAIL PROTECTED] wrote:
On Fri, Oct 29, 2004 at 01:29:43PM
Here's the story...
I'm trying to compile qmail-mysql with a new patch that I have found.
We've got a test mail server set up explicitly for trying this. Did
some googling and asked a question on here earlier about how exactly
you get a patch to compile with the ports collection. The answer was
Ah I love this mailing listthanks for the suggestions will try
them as soon as possible.
On Fri, 29 Oct 2004 12:35:32 -0700, Kris Kennaway [EMAIL PROTECTED] wrote:
On Fri, Oct 29, 2004 at 01:29:43PM -0600, Danny MacMillan wrote:
Disclaimer: This could all be complete nonsense, and
This is what worked for me
While in KDE open a terminal window, su to root and run kmix, and
check the remember volume box. That's what has worked for me
On Fri, 29 Oct 2004 15:01:17 -0700, Kent Stewart [EMAIL PROTECTED] wrote:
On Friday 29 October 2004 02:37 pm, Andreas Davour wrote:
On
I'm looking at adding some patches to our qmail installation. But am
having troubles finding out exactly how i make the port compile using
the patch I'm wanting to use. The port I'm using is qmail-mysql 1.03
we have a patch that we use to compile with it, that replaces the
qmail-103.patch file.
in THAT directory that I put it?
On Thu, 28 Oct 2004 09:58:54 -0500, CHris Rich [EMAIL PROTECTED] wrote:
I'm looking at adding some patches to our qmail installation. But am
having troubles finding out exactly how i make the port compile using
the patch I'm wanting to use. The port I'm using is qmail
badrcptto which the
site is http://patch.be/qmail/badrcptto.html.
Basically I'm just curious if anyone has had any experience with them
and how those experiences went.
Thanks and thanks for the quick replies as well
On Thu, 28 Oct 2004 09:58:54 -0500, CHris Rich [EMAIL PROTECTED] wrote:
I'm looking
40 matches
Mail list logo
