PowerEdgeTM 1950

Hello guys, I want to know if Dell PowerEdge 1950 works fine on FreeBSD 6.1 i386. (I am interested if network cards are detected and work properly, also if SATA/SAS drive is detected properly. best regards ovidiu ___ freebsd-questions@freebsd.org

Re: tool for checking website

riccardo_diago wrote: depend on what u really wanna check... 1. the web server? 2. the protocol http? 3. or if the web site is just visible(avoid defacement) etc... Can u be more specific? Rik if you want /need to monitor more services (like http or mysql) nagios is a nice tool

Re: Plesk and FreeBSD 6.1 64-bit getting frustrating

Hello We were using Plesk on FreeBSD 5.4, i386, and had a lot of problem with qmail wich is crashing sometimes without any reason. We tried differend tips found on forums and disabling antivirus and modifying some script we managed to restart the crashed mail service by watchdog, but still

Broadcom BCM5780 NIC on fujitsu primergy 220 server

Hi, I've found this post: http://www.mail-archive.com/freebsd-net@freebsd.org/msg19247.html It seems that support for BCM5780 was added into bge driver, in CURRENT, so i've cvsuped, and tried, and still not working. Anybody have an ideea howto solve this problem? (I have a Fujitsu Primergy

Fujitsu RX220 Network Card not working (Broadcom BCM5780)

Hi I just bought a Fujitsu Primergy RX220 and network cards are not working. I have FreeBSD 6.1 Any hint what shoud I do? The network cards are based on chipset BCM5780 best regards ovidiu ___ freebsd-questions@freebsd.org mailing list

Re: pppoed using mpd - dirrect connect between LAN clients

. Lowell Gilbert wrote: Ovidiu Ene [EMAIL PROTECTED] writes: Hello guys I've setup a pppoe server using mpd and i've activated proxy arp in pppoed. The problem is that all traffic between LAN users is going via pppoed NIC. I do not want that, i want that LAN users to have traffic

pppoed using mpd - dirrect connect between LAN clients

Hello guys I've setup a pppoe server using mpd and i've activated proxy arp in pppoed. The problem is that all traffic between LAN users is going via pppoed NIC. I do not want that, i want that LAN users to have traffic direct, like using fixed IPs. it is possible? how?

Re: WinXP administration guide for unix guru

is this a joke? Kent Hauser wrote: Hi, I've been a Unix sysadmin (SunOS 3.x, 4.x, Solaris, FreeBSD) for 15 years, but am now being forced to learn how to run a collection of XP boxes. Can anyone recommend a book which explains this confusing beast? I'm talking about a book which

Load Balancing - Nice and Easy - no BGP, no isp help.

Hello friends I am trying for a while to make a load balancer under FreeBSD I would have: 3 nics, ISP1 nic, ISP2 nic and LAN nic. What i've done until now, after reading lots of posts, googling for a while: - I've suceeded to setup an outgoing load balancer with pf, it works perfectly but

Problems with pppoed !

Hello guys I have problems with pppoed. I've used to run over almost 100 users, it worked fine for 4 months, now is not working, it seems it forks many many processes and no one is able to connect. cut /var/log/messages this is the error i get Aug 18 22:59:34 server kernel: failed in

DHCP Issue - could not get ip.

Hello. I have a problem with DHCP, i've tried to solve googling, reading post on forums. I have a DHCP cable modem connection. in rc.conf i have ifconfig_vr0=DHCP when i launch dhclient -d vr0 i get: I've tried differend things, like setting the nic for 10 mbps, half-dupplex, reseting the