In an enviroment where the ethernet network interface is connected to a public
ethernet network (internet). And a IPv4 address assignment scheme is static.
One can simple add primary IP by:
ifconfig interface inet 1.2.3.4
And an additional aliases with:
ifconfig interface inet 1.2.3.5 alias
I have seen some really low-weight, cheap laptops that use the:
MIPS XBurst 400 MHz CPU.
Does it perform well ..?
An Intel Celeron 900 MHz Will do mpeg4 (divx/h264), is this CPU likely to
do that aswell ..?
___
freebsd-questions@freebsd.org
Is it normal with a mount time of 44 seconds for a 250G FAT32 volume ..?
CPU: Intel(R) Pentium(R) M processor 1600MHz (1594.84-MHz 686-class CPU)
umass0: Sunplus Technology Inc. USB to Serial-ATA bridge, class 0/0, rev
2.00/ec.02, addr 2 on uhub3
da0 at umass-sim0 bus 0
Is it vinum or gvinum (geom8) that is the utility to create a RAID5 volume..?
Things like that gvinum lacks the 'stop' command etc.. makes me think
that it's not production ready or that the source code has not matured enough.
/P
___
Extracted sources: sbase, srelease, ssys
You also need scontrib (ACPI sources are there) component and maybe
some others for successful build.
btw, this is not a very usual (and a simple) way to make kernel.
I added device acpi to the kernel configuration file. And it made the error
go away.
In previous releases. It was possible to make at leas the generic
kernel compile out of the box.
It still is. You have to get the full sources though.
What you are trying to do now, by extracting more parts of the source
tree as you need them is a very good way to learn the dependencies of
What S-ATA controller is recommended for a x86/FreeBSD-6 (or 7) that is
stable and reliable in terms of hardware design, and software drivers ..?
My current Promise card is said to abuse PCI burst mode, in essence exploit
to tight timing margins. And the motherboard doesn't have any option to
Is there anyway to burn a DVD+R with 'burncd' or any other software that
doesn't involve atapicam..?
DVD+RW works fine, except for that burncd wait forever to complete the format.
System:
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
CPU: Intel Pentium III (598.06-MHz 686-class CPU)
real
Is there any software to model 3D constructions for viewing and
to produce drawings.. ?
I have found irit, brlcad, rayshade.. none seems to solve it sufficiently.
If it were 2D only, xfig could done it. Qcad seem to produce .dwg, but only
work in 2D aswell.
Intel pentium cpu timer tsc:
'Timecounter TSC frequency X Hz quality Y' (from dmesg)
What is the definition of quality ..?
I have looked briefly in the /usr/src/sys/i386/i386/tsc.c sourcefile and
the intel-celeron datasheet. Without finding anything useful.
(Btw, Crystals are often defined
Intel pentium cpu timer tsc:
'Timecounter TSC frequency X Hz quality Y' (from dmesg)
What is the definition of quality ..?
I have looked briefly in the /usr/src/sys/i386/i386/tsc.c sourcefile and
the intel-celeron datasheet. Without finding anything useful.
From src/sys/sys/timetc.h:
I have written an ftp server in perl to aid with installations over ftp.
http://www.ludd.luth.se/~pb/perlftp3.pl
Do like this:
If your release is located in /path_to_relases/5.4-RELEASE on 10.0.0.99
Type on your 10.0.0.99 freebsd machine:
perlftp3.pl /path_to_relases 12000
Then
I have a Epson Perfection 1250 USB scanner. It works fine under Windows Me.
I'm trying to get it to work under FreeBSD-4.7 and have patched usbdevs,
usbdevs.h, usbdevs_data.h, uscanner.c in /usr/src/sys/dev/usb
However the only thing I'm getting is:
[EMAIL PROTECTED] /usr/src/sys/dev/usb
Dirk Meyer wrote:
Peter B wrote:
I have a Epson Perfection 1250 USB scanner. It works fine under Windows Me
I'm trying to get it to work under FreeBSD-4.7 and have patched usbdevs,
usbdevs.h, usbdevs_data.h, uscanner.c in /usr/src/sys/dev/usb
without patches:
FreeBSD 4.8-PRERELEASE #22: Thu
I have a Epson Perfection 1250 USB scanner. It works fine under Windows Me.
I'm trying to get it to work under FreeBSD-4.7 and have patched usbdevs,
usbdevs.h, usbdevs_data.h, uscanner.c in /usr/src/sys/dev/usb
However the only thing I'm getting is:
[EMAIL PROTECTED] /usr/src/sys/dev/usb
I have tried to get mencoder to capture and encode from my tv card but it
won't work. Tried various options and examples from freebsd maillinglists
without success.
Any suggestions how to accomplish realtime capture and compression ?
(possibly with other tools than mencoder..)
Motherboard:
16 matches
Mail list logo