FreeBSD console weirdness when booting from usb stick

Hi, I'm booting FreeBSD 8 from an USB stick, but when I do so, the console no longer works. They USB keyboard seems to do nothing, and during the boot process when the daemons are starting it seems like there is another keyboard attached on which the ENTER key is stuck. That is, while the

FreeBSD as USB joystick

Hi, I'm wondering if I can turn my FreeBSD into a (very expensive ;-)) joystick. That is, I have a PS2 and want to be able to control it via my laptop. This would amount to connecting a USB cable between my PS2 and my laptop, and getting the PS2 to detect it as a joystick with the right

Re: FreeBSD as USB joystick

Hi, Wojciech Puchar wrote: That is, I have a PS2 and want to be able to control it via my laptop. This would amount to connecting a USB cable between my PS2 and my laptop, and getting the PS2 to detect it as a joystick with the right identifier string, and being able to send button presses

Re: CARP bridge

Hi, Nikos Vassiliadis wrote: Sebastiaan van Erk wrote: Thanks for the suggestion. I tried it, but unfortunately the carp device never leaves the INIT state when I put the ip on the bridge. :-( I did find some similar problem here: http://www.freebsd.org/cgi/query-pr.cgi?pr=125816 I just

CARP bridge

Hi, I have a bridged OpenVPN setup where the OpenVPN tap0 driver is bridged (via bridge0) to the physical em1 interface, which has a VIP via a carp1 interface: em1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST metric 0 mtu 1500

Re: CARP bridge

Hi, Julien Cigar wrote: On Wed, 2009-04-29 at 11:37 +0200, Sebastiaan van Erk wrote: Hi, I have a bridged OpenVPN setup where the OpenVPN tap0 driver is bridged (via bridge0) to the physical em1 interface, which has a VIP via a carp1 interface: em1: flags=8943UP,BROADCAST,RUNNING,PROMISC

Re: CARP bridge

Hi, Nikos Vassiliadis wrote: Sebastiaan van Erk wrote: Julien Cigar wrote: Maybe you've to do ARP Proxy on one side ? Try to add an ARP entry in the ARP table with arp (arp -s 1.2.3.4 MAC foo) .. Thanks for the suggestion. Ok, static arp works: that is, if I take the carp1 mac address

esxi and freebsd vlans

addresses don't work. I've tried setting the vlan id on the vSwitch to none and to 22, but in neither of the two cases does it work. Does anybody have FreeBSD vlan's working on ESXi or know how to get it working? Many thanks, Sebastiaan van Erk smime.p7s Description: S/MIME Cryptographic Signature

Re: esxi and freebsd vlans

Hi, Thanks for your response! :-) Michael K. Smith - Adhost wrote: Hello Sebastian: Hi, I ran into the ESXi limit of 4 NICs per VM, so I figured I would work around this using FreeBSD's vlan devices. I made 2 test installs with the following interface configuration: test1:

Re: esxi and freebsd vlans

Hi, Michael K. Smith - Adhost wrote: Hello Sebastian: Hi, I ran into the ESXi limit of 4 NICs per VM, so I figured I would work around this using FreeBSD's vlan devices. I made 2 test installs with the following interface configuration: test1: ifconfig em0 inet 10.10.10.1 netmask

Re: Problem setting up PPTP server

that in mpd. Does anybody know a way to require MPPE in mpd? Regards, Sebastiaan Sebastiaan van Erk wrote: Hi, I'm trying to set up mpd (3.18) on a FreeBSD server to allow windows and linux clients to connect. Currently I've only been trying to make the linux connection succeed (Ubuntu with ppp-2.4.4

Problem setting up PPTP server

Hi, I'm trying to set up mpd (3.18) on a FreeBSD server to allow windows and linux clients to connect. Currently I've only been trying to make the linux connection succeed (Ubuntu with ppp-2.4.4), but I get the following output from linux pppd: CHAP authentication succeeded sent [CCP ConfReq