-> 0
>
> Got the sound working like it was.
> How do I get it to stick across reboots?
>
> Which would be the preferred way?
Since you can set it with sysctl then sysctl.conf is the logical place,
although loader.conf might also work. I use sysctl.conf so I know that
wo
e this does not work. Unless I hack the Makefile and force it to
> enable gui mode it just isn't compiled in.
Try running 'make show-options' and see what you get. Mine shows that
virtually everything is disabled. If I run 'make showconfig' then it
shows n
4.2BSD0 0 0
t:2097055 398458884.2BSD0 0 0
I also tried newfs on all the ufs partitions without problems. I just
tried this on a FreeBSD 8.2 system and it works there as well.
--
Carl Johnsonca...@peak.org
_
l will handle these, so you definitely should
experiment first.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
non-OS components. You can use
> it as a basis to build a program that will send you system messages
> in an audible way in morse code... :-)
Have you looked at the morse man page lately, specifically the -p
option? :-) Just try 'morse -p sos' to test it.
--
Carl Johnsonca..
Warren Block writes:
> On Mon, 11 Mar 2013, Carl Johnson wrote:
>
>> It is my understanding that FreeBSD doesn't allow using part of a disk,
>> but grabs the entire disk. That means that VirtualBox can't use
>> partitions on a disk that any other partitions
ing that FreeBSD doesn't allow using part of a disk,
but grabs the entire disk. That means that VirtualBox can't use
partitions on a disk that any other partitions are being used by
anything else, including FreeBSD itself. Am I wrong about this? I use
VirtualBox using vdmk f
Paul Macdonald writes:
> On 01/02/2013 22:50, Carl Johnson wrote:
>> Gökşin Akdeniz writes:
>>
>>> Fri, 01 Feb 2013 11:51:41 -0800 tarihinde
>>> Carl Johnson yazmış:
>>>> Does anybody have any suggestions on what might have happened and what
>&g
Carl Johnson writes:
> Kevin Kinsey writes:
>
>> On Fri, Feb 01, 2013 at 11:51:41AM -0800, Carl Johnson wrote:
>>> I ran freebsd-update to update my 8.1-RELEASE system to 8.3-RELEASE
>>> (freebsd-update -r 8.3-RELEASE upgrade). It downloaded a bunch of
&g
Gökşin Akdeniz writes:
> Fri, 01 Feb 2013 11:51:41 -0800 tarihinde
> Carl Johnson yazmış:
>>
>> Does anybody have any suggestions on what might have happened and what
>> can be done?
>>
>
> Hello Carl,
>
> What does "# uname -a" or "
Kevin Kinsey writes:
> On Fri, Feb 01, 2013 at 11:51:41AM -0800, Carl Johnson wrote:
>> I ran freebsd-update to update my 8.1-RELEASE system to 8.3-RELEASE
>> (freebsd-update -r 8.3-RELEASE upgrade). It downloaded a bunch of
>> files, asked me to edit some configuration
ded.
Does anybody have any suggestions on what might have happened and what
can be done?
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
ps://github.com/gerard/ext4fuse/
I haven't tried it so I don't know how well it works.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubsc
Walter Hurry writes:
> On Fri, 25 Jan 2013 21:07:59 -0800, Carl Johnson wrote:
>
>> There is a package called 'linuxfdisk' that is just a FreeBSD
>> implementation of the linux fdisk and will show you what the FreeBSD
>> partitions/slices are. You can also u
ions, and the command 'gpart list ada0s4' should show the
logical partitions inside of the extended partition. You can also use
'file -s' and possibly do read-only mounts to see exactly what they
contain. The names will probably map out like linux, but the 'sda
Carl Johnson writes:
> I recently installed 9.1 on a system and labels don't seem to work as
> I would expect. I can get them to work in /etc/fstab, but only the
> ones referenced there show up in /dev/ufs and /dev/gpt. I have seen
> this in previous versions, and in those cas
age. My
experience is that labels in /etc/fstab work fine, but they may or may
not be visible in /dev or with glabel if they are not in fstab.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
ay I'd say I prefer links for interactive text mode
>> browsing. Still "lynx -dump" is a welcome tool in some
>> of my scripts, and never change a running system. :-)
>>
>
> Ok, the reason I ask is actually because I have this insane (?) idea of
> shoving
> one of the aforementioned solutions onto the installation media so that (gasp)
> we can have that functionality back like we had in the days of sysinstall.
>
> So naturally, my first question is "which one?"
>
> Thoughts?
I just looked at the DVD install disk and it has firefox, links1, links,
and w3m. That should take care of most needs, but I don't know about
the CD disks.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
idn't show any of them.
Does anybody have any ideas about how to get the system to recognize
all labels? A command after boot would be acceptable since I could
just put it in /etc/rc.local.
--
Carl Johnsonca...@peak.org
___
freebsd
vi in FreeBSD is already nvi. The name nvi is a link to vi in
/usr/bin and the source includes nvi at /usr/src/contrib/nvi/.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
e FreeBSD, sda3 (oak) chainloader
root(hd1,2)
chainloader +1
boot
title FreeBSD, sda3 (oak) /boot/loader
root(hd1,2,a)
kernel /boot/loader
boot
--
Carl Johnsonca...@peak.org
___
freebsd-q
1 1
/dev/label/OakSwap none swapsw 0 0
I think any of the other label schemes will also work. If you don't
remember which label is which device id, then 'glabel status' will show
that, but you shouldn't need to.
--
C
lei yang writes:
> On Tue, Jul 24, 2012 at 12:03 AM, Carl Johnson wrote:
>> lei yang writes:
>>
>>> On Mon, Jul 23, 2012 at 12:25 AM, Polytropon wrote:
>>>> On Sun, 22 Jul 2012 22:41:57 +0800, lei yang wrote:
>>>>> Hi,
>>>>>
bsd: TCP/IP swiss army knife
netcat-traditional: TCP/IP swiss army knife
netcat6: TCP/IP swiss army knife with IPv6 support
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
Fbsd8 writes:
> dmesg command does not show date of last boot.
>
> Are there some other commands to find date of last boot?
In addition to the other responses:
sysctl kern.boottime
--
Carl Johnsonca...@peak.org
___
freebsd-
> I switched from i386 to amd64 last year so it might be something to do
> with that. I'm currently using 8.2p6.
The only way I have found to do it is [[:<:]] and [[:>:]]. That is very
awkward, so I't love to hear of a shorter way. I found them in the
re_format(7) manpage.
--
Warren Block writes:
> On Tue, 28 Feb 2012, Carl Johnson wrote:
>
>> Warren Block writes:
>>
>>> On Tue, 28 Feb 2012, Da Rock wrote:
>>>
>>>> I'm starting to believe this dog won't hunt (in fact is dead,
>>>> bloated, and ful
n noticed
your page and tried the PCnet-PCI II card and it started working. I
would guess that means their Intel card emulation is incomplete.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.fre
t happens, and I have been running unix and linux for about 20
years. I have always had multiple partitions in the past, but for 9.0 I
went with the single partition.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
g
>>kldload umodem
>>
>
> Done, although kldload u3g tells me that file already exists! Perhaps
> because I booted up with my Huawei dongle plugged in.
> kldstat | grep u3g shows me nothing though.
The command 'kldstat -v' shows tha
edu:/usr/obj/usr/src/sys/GENERIC i386
>
> push900# which kgzip
> /usr/sbin/kgzip
On my system:
$ uname -a
FreeBSD birch.localnet 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30
UTC 2012 r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
$ whereis kgzip
kgzip: /usr/src/u
;kenv' command seems to have the board name available as
'smbios.system.product'. The 'kenv' command without arguments will show
all values, so you can make sure that is the proper variable.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
mmands "with root
>> privileges".
>>
>
> "sudo su -" or "sudo sh" and the customer gets a native root shell which
> does *not* log commands !
The sudoers manpage mention the noexec option which is designed to help
with the first problem. They a
such a hassle
I can't help directly with your problem, but both portupgrade and
portmaster support packages. In both cases you can just supply the -P
or -PP options to specify how to handle packages. I think they both
require that the ports tree be present for the /usr/ports/INDEX file,
but othe
authpriv
The sample file that was mentioned earlier is one source for
information, but the best source is the sudoers(5) man page. Just
search it for syslog and you will find several settings.
--
Carl Johnsonca...@peak.org
___
freebsd
of that somewhere, so I grep'ed the man
pages. I found hints on geom(4) and boot0cfg(8), but they certainly
aren't obvious.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/m
x... It's all explained in
> crontab(5).
Just be aware that 'Run once, at startup', means when 'cron' starts, not
just when the system boots, unless they have changed it recently.
--
Carl Johnsonca...@peak.org
_
C
dev.cpu.1.temperature: 29.2C
for your system?
I have an AMD cpu and the amdtemp kernel module provides that
information. I am not familiar with the Intel cpus, but the coretemp
module is supposed to provide the same information for them. I use
gkrellm for various thing,
tem requires that you already have the
'ufs2_stage1_5' file in your grub directory.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Carl Johnson writes:
> Patrick Lamaiziere writes:
>
>> Hello,
>>
>> I use sysutils/most to have nice manual pages in color, that's cool but
>> is there a way to do this with the base system (ie without adding port)?
>
> I use a colorized termcap with les
hat might have been just because I hadn't
been using enough colors. I put it in but there is no change for my
applications.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailm
't tried 9.0, but this works
on 8.1-RELEASE and 8.2-RELEASE. You can decide for yourself if that
does what you want.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinf
Carl Johnson writes:
> "Ronald F. Guilmette" writes:
>
>> I've been bringing up a new amd64 box with 8.2-RELEASE. So far I've managed
>> to get everything installed OK, including a boatload of freshly-built ports.
>> I've even gotten flash10 wo
aying from audio.
My system uses a Gigabyte GA-MA785GPM-US2H, and the sndstat output is:
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: (play)
pcm1: (play/rec) default
pcm2: (play/rec)
pcm3: (play/rec)
Let me know if you want further information.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
f the OP is going to run a 64-bit OS, then hardware vitualization
assist is *required* for VirtualBox to handle it. It is not required
when VirtualBox is running a 32-bit OS. Just another minor detail to
consider.
--
Carl Johnsonca...@peak.org
___
partially updated. That will at least give you some idea about
the schedule.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send an
x27;
and 'mix' settings in mixer(8). I also must have the 'igain' set to
something above 0, but the volume isn't directly controlled by it.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
h
Flags are explicitely mentioned here. Maybe you can give
> this program a try?
I think that tar will also work (but not gnu tar), and it is part of the
base system. The manpage does show an example of how to do this, but
calls it moving the file heirarchy.
--
Carl Johnson
see 'em with
> "zfs list -t snapshot".
The .zfs directory is hidden by default so you have to specifically ls
or go into them. Do a 'ls' on the base directory of any zfs file
system, and then add .zfs to the end and you should see the .snapshots
directory.
--
C
eport which inode was using a
> particular block.
It looks like the best bet would be fsdb, assuming that it is a UFS
file system. That does have a 'findblk' command to find a file
containing a block, but you would need to calculate the
ons but
in a friendly way not like you did.
10) Have a nice day and enjoy your OS of choice be it whatever it is.
Regards,
Antonio
Happy FreeBSD user.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To uns
ect-Linux-FAQ/downloadwp8.html. Most of the
links are dead or changed, but a couple of them do have files to
download.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
2011/6/29 Warren Block
> On Wed, 29 Jun 2011, Dick Hoogendijk wrote:
>
> Op 29-6-2011 21:19, Trond Endrestøl schreef:
>>
>>> On Wed, 29 Jun 2011 21:18+0200, Dick Hoogendijk wrote:
>>>
>>> Op 29-6-2011 21:15, Trond Endrestøl schreef:
> On Wed, 29 Jun 2011 20:42+0200, Dick Hoogendijk wro
install gives me:
YAML::Syck is up to date (1.17)
I'm not really sure what else to check. Can someone point me in the
right direction?
Carl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questi
.FreeBSD.org/pub/FreeBSD/ports/distfiles/gd-2.0.35.tar.bz2:
Syntax error, command unrecognized
=> Couldn't fetch it - please try to retrieve this
=> port manually into /usr/ports/distfiles// and try again.
*** Error code 1
Stop in /usr/ports/graphics/gd.
What is the recommende
On 2011-04-22 4:13 AM, Manolis Kiagias wrote:
On 04/22/2011 10:33 AM, Manolis Kiagias wrote:
On 04/22/2011 10:08 AM, Carl wrote:
This form will override the Makefile present in the current directory
and will use the specified make file with name your_own_make_file_name .
make -f
make file. If I'm correct, that doesn't seem
to me to be a good idea from a maintenance perspective. I was hoping for
something like the -f option that somehow inserted rather than replaced.
Carl / K0802647
__
solution?
Given that I do not want to customize the port's Makefile, I was hoping
'make' would support a command line option that would let me simply
point to a separate file containing the list of variables to add, one
per line. It'
el: An incorrect partition c may cause problems for standard
> system utilities
> partition h: partition extends past end of unit
>
> I don't care about partition 'h'; it is there only to stop the
> preceding partition from covering the last sector. Are there any real
&
sion if
> required to make this stuff run.
One addition to the points that others have made is that the Linux
compatibility layer appears to be 32 bits only, even for 64 bit versions
of FreeBSD. At least that is true for Release 8.1. If the software is
64 bit linux, then it won't
How long are you waiting? What are you booting from?
On Sat, Feb 26, 2011 at 7:54 PM, Slawomir Wojtczak wrote:
> > Anything interesting happening during your install?
>
> I would say no, everything seems smooth until I try to boot it.
>
> ___
> freebs
r fstab entry for that was:
>
> /dev/ad1s1 /c ntfsrw 1 0
>
> But now with labels active I really don't know how to proceed.
You can tell what the current labels are with the command 'glabel
status', or 'glabel list
quivalent of the binary packages for the entire FreeBSD ports tree.
You don't need them if you install over the net.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/li
t; ipv4_addrs_bridge0="10.0.1.2/24"
>
Doh! Of course, thanks. Rookie mistake.
Carl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Trying to configure a bridge interface with two member interfaces,
fxp0 and re0. Configuring the interface from scratch manually works
fine but when I add config entries to rc.conf the two member
interfaces aren't added at boot. Bridge0 is created it just doesn't
have any members. From the seria
t have any non-ASCII characters, or at least not properly
displayable ones. That probably means that you have the wrong locale
set for whatever your display is. If you just want to see only ASCII,
then try 'LANG=C man ports'. If that doesn't work then try setting
LC_ALL=C instead of LAN
nk that is default, so somebody had to have manually set the
flag on those files. Whoever did that should have noted that, or didn't
understand what the operation meant.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.or
Chip Camden writes:
> Quoth Carl Chave on Friday, 14 January 2011:
>> > I'd suggest looking at the Btimes of top level directories
>> >
>> > stat -f "%SB %N" /*
>>
>> Or how about just / as this ~15 minutes earlier than most of the
>&g
but others not. The newsyslog.conf(5)
manpage mentions a 'C' flag that can be specified.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To u
> I'd suggest looking at the Btimes of top level directories
>
> stat -f "%SB %N" /*
Or how about just / as this ~15 minutes earlier than most of the
remaining top level directories
sodserve# stat -f "%SB %N" /*
Jan 9 04:54:21 2011 /COPYRIGHT
Jan 9 04:54:21 2011 /bin
Jan 9 04:54:21 2011 /boot
Chip Camden writes:
> Quoth Carl Johnson on Thursday, 13 January 2011:
>> Polytropon writes:
>>
>> > On Thu, 13 Jan 2011 13:50:27 -0800, Chuck Swiger wrote:
>> >> On Jan 13, 2011, at 1:46 PM, Devin Teske wrote:
>> >> > This is nearly alw
t/defaults/loader.conf
> -r--r--r-- 1 root wheel 19426 Aug 24 2008 /boot/defaults/loader.conf
>
> No, forget about that, also nonsense, looks to new...
How about /var/empty:
% ls -ldo /var/empty/
dr-xr-xr-x 2 root wheel schg 512 Jul 18 19:16 /var/empty/
It can be changed, but doesn
> echo -en "\n\nNow run these two commands to make the changes live, and
> reboot
> zfs set mountpoint=legacy $zpool/be/$nroot
> zpool set bootfs=$zpool/be/$nroot $zpool\n\n"
Thanks for the input krad. It would be nice to easily switch back and
forth but aren't you still stuck if everything bl
Posting the below for input. The bulk of this is from a guide that
Morgan Wesström posted to this list. Some of it is taken from the
root on ZFS wiki entries on freebsd.org. Some from a pjd post here:
http://blogs.freebsdish.org/pjd/2010/08/06/from-sysinstall-to-zfs-only-configuration/
And then
e testing for flag support out of curiosity, and found
that only cp -p, bsdtar and dump support them. Cpio, afio, gnutar,
gnucp and pax do not support them. I also tested extended attributes
(used for ACLs?), and only bsdtar and dump worked for them. Those
results were for usf, and generally did
On Wed, Dec 1, 2010 at 12:07 AM, Carl Chave wrote:
> I followed a gpt/zfs on USB stick guide for putting a base 8.1-RELEASE
> amd64 onto a 4GB sandisk USB memory stick. All went fairly well and
> the system will boot but fails to mount the root file system and dumps
> me a the mount
tem finishes booting.
In /boot/loader.conf I've got:
zfs_load="YES"
vfs.root.mountfrom="zfs:zrootusb"
zrootusb mountpoint is set to legacy and /etc/fstab exists but is
empty, per the guide.
Any ideas?
Thanks,
Carl
___
freebsd-q
or doing backups but also still have internet access via the
server's bridge interface right?
Is there a reason I wouldn't want to do it this way?
Thanks,
Carl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
advice on the net with so far isn't working to start
>> it:
>> echo "startkde" > ~/.xinitrc
>> I have attempted startx but the system doesn't know about it.
>> may I have a suggestion to proceed?
Do you have
efault_unit=1) controls the back panel jacks, and
/dev/mixer2 controls the front panel headphone jack. You will probably
have to just experiment with the different mixer controls to see which
controls which on your system.
--
Carl Johnsonca...@peak.org
___
Carl Johnson writes:
> I am running rkhunter and it keeps reporting a port inconsistency
> between sockstat and netstat -a. Netstat shows an extra 5 ports open,
> but netstat doesn't show what is holding ports open, so I don't know
> what they are. Does anybody know ho
Carl Johnson writes:
> Anonymous writes:
>> Do you have some networking FS enabled (NFS, AFS, Coda, etc)? Perhaps,
>> one of them listens for connections from kernel and is not associated
>> with userland process. But it's just a guess.
>
> I have NFS enabled,
Anonymous writes:
> Chuck Swiger writes:
>
>> Hi--
>>
>> On Sep 18, 2010, at 4:27 PM, Carl Johnson wrote:
>>> The following are the ports if anybody has any ideas, but I would also like
>>> to know how to trace them down
Chuck Swiger writes:
> Hi--
>
> On Sep 18, 2010, at 4:27 PM, Carl Johnson wrote:
>> The following are the ports if anybody has any ideas, but I would also like
>> to know how to trace them down myself:
>>
>> tcp4 0 0 *.876 *.*
0 *.876 *.*LISTEN
tcp6 0 0 *.921 *.*LISTEN
udp4 0 0 *.608 *.*
udp6 0 0 *.952 *.*
udp6 0 0 *.804 *.*
--
Carl Johnsonca..
a FreeBSD 8.1-RELEASE, so they might not work
exactly for other versions. This also assumes that you trust the
certificates in the ca_root_nss package, so you will have to decide that
for yourself.
I have seen several questions and problems about ssl certificates, so
hopefully others will fin
ash...@freebsd.org (Ashish SHUKLA) writes:
> Carl Johnson writes:
>> Anonymous writes:
...
>
>>> Try without ~/.newsrc.eld. BTW, what backend do you use for reading mail?
>>> nnmaildir?
>
>> I just tried it, but there was no difference. I use nnml for the
ash...@freebsd.org (Ashish SHUKLA) writes:
> Carl Johnson writes:
>
...
>
> I use following sh script to synchronize my mailbox stuff which includes
> Maildirs, Gnus configuration, procmail configuration, mairix db, etc.
>
...
Thanks, I'll have to think about that.
--
Car
ash...@freebsd.org (Ashish SHUKLA) writes:
> Carl Johnson writes:
>
> [...]
>
>
>> Now if I could just figure out why gnus doesn't work right under emacs
>> I could finish migrating from Linux to FreeBSD.
>
> I use same .gnus in both GNU/Linux and FreeBSD an
Carl Johnson writes:
> I am experimenting with 8.1 in VirtualBox, but I discovered that I
> can't get gnus to work. I just brought over my configuration from a
> working 7.3 system, but on 8.1 it won't read the mail from the
> system. Gnus will start up, but it just re
Carl Johnson writes:
> I have running versions of 7.3 and 8.0, so I tried experimenting with
> 8.1 in VirtualBox, but I ran into a couple of problems. I have an 8.0
> system that is running a IPv6 tunnel to sixxs.net, and it is running
> rtadvd to act as the gatway for my network.
Anonymous writes:
> Carl Johnson writes:
>
>> I am experimenting with 8.1 in VirtualBox, but I discovered that I
>> can't get gnus to work. I just brought over my configuration from a
>> working 7.3 system, but on 8.1 it won't read the mail from the
>>
Byung-Hee HWANG writes:
> Carl Johnson writes:
>
>> I am experimenting with 8.1 in VirtualBox, but I discovered that I
>> can't get gnus to work. I just brought over my configuration from a
>> working 7.3 system, but on 8.1 it won't read the mail from the
>
Vincent Hoffman writes:
> On 30/07/2010 18:48, Carl Johnson wrote:
>> I have running versions of 7.3 and 8.0, so I tried experimenting with
>> 8.1 in VirtualBox, but I ran into a couple of problems. I have an 8.0
>> system that is running a IPv6 tunnel to sixxs.net, and it
lobal address
assigned automatically.
Thanks for any advice.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to &qu
to another
mail program. Thanks for any ideas.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
ly muted to too loud
and was distorting, so I had to reduce some of the settings. You can
use sysctl hw.snd.default_unit=1' to set the default mixer device to 1
or whichever you want to use.
--
Carl Johnsonca...@peak.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
> With grub4dos
> title FreeBSD
> pxe keep
> chainloader --raw (pd)/images/freebsd/boot/pxeboot
>
> it loads pxeboot, but then:
>
> netboot: couldn't probe pxenet0
> pxe_open: netif_open() failed
> ...
> can't load 'kernel'
> OK
>
> So it loads pxeboot, but then pxeboot can't use the pxenet0 dev
> Linux systems with netboot can boot off http (using wget) and it's much
> better. Twice as fast for the Clonezilla load, but System Rescue went from
> three minutes to only 18 seconds.
>
Etherboot/gPXE is interesting also. It will boot from http. One of
my grub4dos menu entries is a gPXE flop
> After a very cursory setup, it works! I took notes and will write it up in
> a bit.
>
> The only complaint I have so far is the speed of download via tftp. A 236M
> ISO took two minutes to load, or about 2M per second. A full CD takes a
> long, long time. Is that typical, or maybe just the po
1 - 100 of 203 matches
Mail list logo