some work for a client whom purchased an Intel
Se7221bk1-e with one of these embedded ICH6-R raid
controllers. Same
symptoms as you stated, install runs great but wont boot from
controller. If I boot from the installation media i can mount
/dev/rd0s1a. Just wondering if you made
several times already.
Regards,
Steve
Regards,
Steve
Hi Steve, I saw your messages on the FreeBSD mailing list
archives.
I am doing some work for a client whom purchased an Intel
Se7221bk1-e with one of these embedded ICH6-R raid
controllers. Same
symptoms
Steve Bertrand wrote:
[ ... ]
- During install (this time it's 6.0-RELEASE as of Nov. 3), I have 3
selections to select from when FDISKing etc: ad4, ad6 and ar0.
- I select ad0 to configure as this is the bootable RAID volume, and
^^^ ...?
everything installs perfectly fine. I
- During install (this time it's 6.0-RELEASE as of Nov. 3),
I have 3
selections to select from when FDISKing etc: ad4, ad6 and ar0.
- I select ad0 to configure as this is the bootable RAID volume, and
^^^ ...?
everything installs perfectly fine. I then proceed to
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Steve Bertrand
Sent: Wednesday, November 16, 2005 1:58 PM
To: 'Chuck Swiger'
Cc: 'FreeBSD Questions'
Subject: RE: ICH6-R
- During install (this time it's 6.0-RELEASE as of Nov. 3),
I
At least now I know that it *can* work, I just have to figure
out how to get it to come up itself ;)
I finally, finally FINALLY got this up and running!!! I don't know
exactly what I did differently, but I decided to just break down and
start from scratch.
- reset CMOS settings to default
-
