Dear All
I found the way :
when the kernel is going to being up to install press space at command
OKboot -c
and then
config:eisa 0
config:quit
then install and after FreeBSD is installed do this routine again
make the device eisa in config file of the kernel commented out and then
compile the
Matthew Seaman [EMAIL PROTECTED] writes:
of yesterday, so I think you've unfortunately bought an unsupported
motherboard. Try asking your vendor if they will swap it for an
alternative model --- I think the Asus P4B533 is supported, and that
looks compatible with the rest of your components.
On Sat, Nov 23, 2002 at 11:59:10PM +0100, TooManySecrets wrote:
I've a SIS 648 MAX motherboard, whit the SIS648 driver, a Seagate 80Gb 7200
rpm hard drive, Creative nvidia Ti4400 and a Pentium 4 2'4Mhz with 533 fsb.
Well, when I try to install freebsd in it, I obtain this message:
ad0:
That is the thread about my question with Kent.
TooManySecrets wrote:
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very happy with it. But my
problem is now, when I change my pc hardware.
That is the thread about my question with Kent.
TooManySecrets wrote:
El Sáb 23 Nov 2002 23:17, escribió:
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices...
Hola Manuel,
Are you using ATA-100 or ATA-133 cables to hook your Maxtor to the SIS
motherboard. Don't connect
On 2002-11-24 14:00, TooManySecrets [EMAIL PROTECTED] wrote:
That is the thread about my question with Kent.
TooManySecrets wrote:
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very
Hi
I bought a laptop ( Dell Inspiron 2650 ) and want to install 4.4BSD on it .
but when it is going to be installed after it ask for configuration when the
kernel is going to probe the devices and write the devices on the screen ,
it says that
pci0 unknown device (vendor=8086 ) IRQ ...
on installing FreeBSD 4.4 on Dell Inspiron 2650 ( 2.0 GHz
)
Hi
I bought a laptop ( Dell Inspiron 2650 ) and want to install 4.4BSD on
it .
but when it is going to be installed after it ask for configuration when
the
kernel is going to probe the devices and write the devices on the screen
,
it says
Hi
By the way , It found the atapci0 device
atapci0 : ... at ata0 and pci0
then it founds the ata0 and found the device type and then
it cannot found the pci0
pci0 unknown device (vendor=8086 ) IRQ ...
pci0 unknown device (vendor=8086 ) IRQ ...
pci0 unknown device (vendor=8086
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very happy with it. But my
problem is now, when I change my pc hardware.
I've a SIS 648 MAX motherboard, whit the SIS648 driver, a Seagate 80Gb 7200
On Sat, Nov 23, 2002 at 11:59:10PM +0100, TooManySecrets wrote:
Hi!!
My name is Manuel Trujillo, from Spain. First, I will apologize about my
english... sorry :(
Well, I use freebsd since february-2002, and I'm very happy with it. But my
problem is now, when I change my pc hardware.
I've
Ron Montgomery [EMAIL PROTECTED] writes:
After selecting the partitions (used auto select) when continuing I got an
error Can't make node /dev/X.
My system is a Sony PCV-RX560 (new this year).
Video is NVIDIA TNT2 (32M)/
Can I get passed this problem or will FreeBSD not work on the Sony?
On Thu, Sep 19, 2002 at 10:22:04PM -0700, Ron Andreasen wrote:
Okay, first off here's the error:
acd0: read data overrun 34/0
acd0: MODE_SENSE_BIG command timeout -resetting
ata0: resetting devices .. at0: DMA limited to
UDMA33, non-ATA66 cable or device
It's a well known bug in
Okay, first off here's the error:
acd0: read data overrun 34/0
acd0: MODE_SENSE_BIG command timeout -resetting
ata0: resetting devices .. at0: DMA limited to
UDMA33, non-ATA66 cable or device
Does this mean the problem is with my hard drives and
cd drives? Here's how those are set up. 40
Ron Andreasen said:
Okay, first off here's the error:
acd0: read data overrun 34/0
acd0: MODE_SENSE_BIG command timeout -resetting
ata0: resetting devices .. at0: DMA limited to
UDMA33, non-ATA66 cable or device
Does this mean the problem is with my hard drives and
cd drives? Here's
I am trying to install FreeBSD on my machine.
I put a FreeBSD 4.5 Disc in the CDROM and set the
boot sequence to CDROM first. When the
/stand/sysinstall interface appears, the keyboard
and mouse did not response. The computer freezed.
I also tried FreeBSD 4.1, the same problem.
501 - 516 of 516 matches
Mail list logo
