Scott Long wrote:
Eric Anderson wrote:
Ensel Sharon wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array,
On Jun 18, 2006, at 10:44 PM, Ensel Sharon wrote:
Let's say I have 8 disks.
Let's say I require raid6.
You require RAID-6 because...? If you want more fault tolerance or
better performance, RAID-10 makes a lot more sense to me than RAID-6,
but YMMV.
If I make one array, I lose 25% to
Eric Anderson wrote:
Ensel Sharon wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
problems with that ? Perhaps
Ensel Sharon wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
problems with that ?
On Sun, 18 Jun 2006, Eric Anderson wrote:
6.1 sysinstall does in fact see both 2820sa controllers, and when I put in
a single 160GB sata drive, it does see that single drive and I can install
onto it, etc.
Sysinstall does _not_ see my 2.7TB raid6 array. I suspect that if it were
Ensel Sharon wrote:
On Sun, 18 Jun 2006, Eric Anderson wrote:
6.1 sysinstall does in fact see both 2820sa controllers, and when I put in
a single 160GB sata drive, it does see that single drive and I can install
onto it, etc.
Sysinstall does _not_ see my 2.7TB raid6 array. I suspect that if