is there any simple way to get data about workstation that prints using
lpd from samba?
what i need is to get IP/name of workstation that queued a print job to
lpd subsystem through samba.
or is the only way to change everything to print to lpd directly using lpd
protocol? quite a bit of
I didn't try by myself, but what about something like
print command = /usr/bin/lpr -P%p -J%J -U%I -r %f
in smb.conf?
I'm sorry to say that you additionally probably have to change
/usr/src/usr.sbin/lpr/common_source/ctlinfo.c
near line 87 to
#define OTHER_USERID_CHARS -_. /* special
I didn't try by myself, but what about something like
print command = /usr/bin/lpr -P%p -J%J -U%I -r %f
in smb.conf?
I'm sorry to say that you additionally probably have to change
/usr/src/usr.sbin/lpr/common_source/ctlinfo.c
near line 87 to
#define OTHER_USERID_CHARS -_. /* special
Hi All
I am sure there is a simple answer to this but I google has not overly helped.
I am trying to mount a samba share that is on a FreeBSD 8.2 server to another
FreeBSD 8.2 server,
Mount_smbfs -I IP //user@host/share /mountpoint
It then asks for a password, I enter the users password and
On Sat, 10 Sep 2011 11:53:48 +0100, Graeme Dargie wrote:
I am trying to mount a samba share that is on a FreeBSD 8.2
server to another FreeBSD 8.2 server,
Mount_smbfs -I IP //user@host/share /mountpoint
It then asks for a password, I enter the users password
and then get mount_smbfs:
Polytropon wrote:
On Sat, 10 Sep 2011 11:53:48 +0100, Graeme Dargie wrote:
I am trying to mount a samba share that is on a FreeBSD 8.2
server to another FreeBSD 8.2 server,
Mount_smbfs -I IP //user@host/share /mountpoint
It then asks for a password, I enter the users password
and then
spen wrote:
smbd
Abort trap
nmbd
The story is that the first time I installed samba I
enabled it in my /etc/rc.conf writting
echo smbd /usr/local/sbin/smbd -D
echo nmbd /usr/local/sbin/nmbd -D
This is incorrect way to start daemons.
I have already changed the way to enable samba on the
machine. I do not use this in rc.conf
echo smbd /usr/local/sbin/smbd -D
echo nmbd /usr/local/sbin/nmbd -D
but simply:
#enable samba
samba_enable=YES
the last message was the one I posted. Fortunatelly I
haven't got any mail since
If I remember correctly, you have to start inetd to run smbd and nmbd. Check
FreeBSD handbook for further details about configuring samba.
Regards,
OJ
___
freebsd-questions@freebsd.org mailing list
At 02:36 AM 10/24/2005, Owen Jeremiah wrote:
If I remember correctly, you have to start inetd to run smbd and nmbd. Check
FreeBSD handbook for further details about configuring samba.
Samba doesn't care about inetd.
Adding samba_enable=YES to rc.conf is sufficient. (assuming you
built samba
Owen Jeremiah wrote:
If I remember correctly, you have to start inetd to run smbd and nmbd.
Check FreeBSD handbook for further details about configuring samba.
You _dont need_ inetd for Samba, moreover, inetd will degrade Samba
performance, and AFAIK is not recommeded by Samba team .
My mistake. I was referring to SWAT instead of smbd and nmbd.
Regards,
OJ
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello to all.
I have a FreeBSD 5.4 Stable machine on my network. I
have recently installed smb,for the 2nd time from
/usr/ports/net/samba3. I have setted up a basic
configuration which will follow. My config is located
in /usr/local/etc/smb.conf
--
Darryl Hoar wrote:
I have Samba installed on a Freebsd 5.1 server.
I am trying to map a share from a windows machine
so that I can copy the data. I can not change the
windows share name. It has a space in it. How
do I specify the share name in fstab.
share name: PSR COMPLETE
Greetings,
I have Samba installed on a Freebsd 5.1 server.
I am trying to map a share from a windows machine
so that I can copy the data. I can not change the
windows share name. It has a space in it. How
do I specify the share name in fstab.
share name: PSR COMPLETE
//[EMAIL PROTECTED]/PSR
On Sun, Nov 16, 2003 at 09:08:12PM -0500, Marty Landman wrote:
No. Now I did rebooted. Same symptom, i.e. windoz explorer tells me
\\Swamisalami is not accessible. ... The account is not authorized to log
in from this station.
Martin, following line in your smb.conf should solve this
At 08:47 AM 11/22/2003, Ilya Varlashkin wrote:
Martin, following line in your smb.conf should solve this problem:
encrypt passwords = yes
Ilya, I almost forgot to reply... sorry. I may not have mentioned on
earlier postings that smbd was not running as I eventually discovered -
only nmbd. I
+++ Marty Landman [15-11-03 23:12 -0500]:
| At 09:46 PM 11/15/2003, Robin Schoonover wrote:
|
| Hmm. Ignoring everything else you gave us, I'd say it sounds like there is
| a firewall in the way. I've had the exact same problem before.
|
| I believe I have ipfw disabled..
|
| # ps -ax|grep
At 02:00 PM 11/16/2003, Shantanoo Mahajan wrote:
what's the o/p of
# ipfw s
ipfw: getsockopt(IP_FW_GET): Protocol not available
Like I said though, I think this config is a total mess now. At some point
I'll work out how to undo what I've (wrongly) done and then start over.
Marty Landman
On Sat, 15 Nov 2003, Marty Landman wrote:
Ok, I think this is a mess now. First I tried the toot in the FBSD Diary,
and now the chapter 2 toot from O'Reilly. My Samba install is likely way
out of rhythm! Still it's so close - I can see the share on windoz explorer
but can't access it that
Ok, I think this is a mess now. First I tried the toot in the
FBSD Diary,
and now the chapter 2 toot from O'Reilly. My Samba install is
likely way
out of rhythm! Still it's so close - I can see the share on
windoz explorer
but can't access it that maybe others here can help.
Here's
At 02:23 PM 11/16/2003, Derrick Ryalls wrote:
CUPS is mentioned in the logs, and you don't seem to know what it is, so do
you have a line similar to:
printing = cups
No, good point. I have ;printing = bsd so that was commented out.
Also, did you define guest in smb.conf and did you create the
On Sun, 16 Nov 2003 21:08:12 -0500
Marty Landman [EMAIL PROTECTED] granted us these pearls of wisdom:
At 02:23 PM 11/16/2003, Derrick Ryalls wrote:
CUPS is mentioned in the logs, and you don't seem to know what it is, so do
you have a line similar to:
printing = cups
No, good point. I
On Sat, 15 Nov 2003 21:37:32 -0500, Marty Landman
[EMAIL PROTECTED] wrote:
Ok, I think this is a mess now. First I tried the toot in the FBSD Diary,
and now the chapter 2 toot from O'Reilly. My Samba install is likely way
out of rhythm! Still it's so close - I can see the share on windoz
At 09:46 PM 11/15/2003, Robin Schoonover wrote:
Hmm. Ignoring everything else you gave us, I'd say it sounds like there is
a firewall in the way. I've had the exact same problem before.
I believe I have ipfw disabled..
# ps -ax|grep ipfw
#
I start it up by doing
# /usr/local/sbin/smbd -D ;
[I am not currently subscribed to this mailing list, so please 'cc:' me
in any replies. Thank you.]
I have a simple home network with one Windows XP machine and one FreeBSD
4.6.2-RELEASE machine. I am trying to set up a Samba share on the
FreeBSD machine that the WinXP box can read/write
# [EMAIL PROTECTED] / 2002-09-25 00:04:08 -0700:
I have a simple home network with one Windows XP machine and one
FreeBSD 4.6.2-RELEASE machine. I am trying to set up a Samba share on
the FreeBSD machine that the WinXP box can read/write to. I can get
it to read the share, but I cannot seem
Sorry for intervening into this thread, but I have some problems
with permissions to subdirectories myself.
A windows machine should be able to read and write its profiles
to a directory called
/usr/local/samba/profiles .
This works ok for a user with root access to my samba server, but
it ends
# [EMAIL PROTECTED] / 2002-09-25 21:32:31 +:
A windows machine should be able to read and write its profiles
to a directory called /usr/local/samba/profiles .
This works ok for a user with root access to my samba server, but
it ends up in access denied for any other user (they belong to
Roman Neuhauser wrote:
i have samba serving files and a printer to several XP, one NT4 (or
is it 5?), and one w98 box. samba is configured to require encrypted
passwords, all the boxes work fine in this respect (you have to
patch the registry for various reasons in various
from years ago when I was setting this up and before samba supported encrypted auth,
the registry change on the windows machines was to let the windows redirector send
passwords *in* clear text as anything after win95b would only send encrypted auth
info. If you setup the samba server to deal
Scott R. wrote:
[I am not currently subscribed to this mailing list, so please 'cc:' me
in any replies. Thank you.]
I have a simple home network with one Windows XP machine and one FreeBSD
4.6.2-RELEASE machine. I am trying to set up a Samba share on the
FreeBSD machine that the WinXP
Thanatos wrote:
I have XP connecting to a samba server on FreeBSD 4.6.2, I can both read
and write from my home directory.
I do have it working now. As per someone's suggestion earlier, I
applied the reg patch from /usr/local/share/doc/samba/Registry and ran
the 'smbpasswd' command to
user.
Regards,
Fred Zhang
- Original Message -
From: Thanatos [EMAIL PROTECTED]
To: Scott R. [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, September 25, 2002 8:34 PM
Subject: Re: Simple Samba Question(?)
Scott R. wrote:
[I am not currently subscribed to this mailing list
34 matches
Mail list logo