the following tidbit:
| Jails have a set a core parameters, and kernel modules can add their
| own jail parameters. The current set of available parameters can be
| retrieved via ``sysctl -d security.jail.param''. Any parameters not
| set will be given default values, often based on the current
page, there's the following tidbit:
| Jails have a set a core parameters, and kernel modules can add their
| own jail parameters. The current set of available parameters can be
| retrieved via ``sysctl -d security.jail.param''. Any parameters not
| set will be given default values, often based
Where do I find the descriptions of what these jail MIBs do?
security.jail.param.allow.mount.zfs: 0
security.jail.param.allow.mount.procfs: 0
security.jail.param.allow.mount.nullfs: 0
security.jail.param.allow.mount.devfs: 0
security.jail.param.allow.mount.: 0
# sysctl -d security.jail.socket_unixiproute_only
security.jail.socket_unixiproute_only: Processes in jail are limited to
creating UNIX/IP/route sockets only
On Feb 6, 2013, at 4:02 PM, Fbsd8 fb...@a1poweruser.com wrote:
Where do I find the descriptions of what these jail MIBs do
On Feb 6, 2013 7:02 AM, Fbsd8 fb...@a1poweruser.com wrote:
Where do I find the descriptions of what these jail MIBs do?
security.jail.param.allow.mount.zfs: 0
security.jail.param.allow.mount.procfs: 0
security.jail.param.allow.mount.nullfs: 0
security.jail.param.allow.mount.devfs: 0
Waitman Gobble wrote:
On Feb 6, 2013 7:02 AM, Fbsd8 fb...@a1poweruser.com wrote:
Where do I find the descriptions of what these jail MIBs do?
security.jail.param.allow.mount.zfs: 0
security.jail.param.allow.mount.procfs: 0
security.jail.param.allow.mount.nullfs: 0
On Feb 6, 2013 7:17 AM, Fbsd8 fb...@a1poweruser.com wrote:
Waitman Gobble wrote:
On Feb 6, 2013 7:02 AM, Fbsd8 fb...@a1poweruser.com wrote:
Where do I find the descriptions of what these jail MIBs do?
security.jail.param.allow.mount.zfs: 0
security.jail.param.allow.mount.procfs: 0
Waitman Gobble wrote:
On Feb 6, 2013 7:17 AM, Fbsd8 fb...@a1poweruser.com wrote:
Waitman Gobble wrote:
On Feb 6, 2013 7:02 AM, Fbsd8 fb...@a1poweruser.com wrote:
Where do I find the descriptions of what these jail MIBs do?
security.jail.param.allow.mount.zfs: 0
Fbsd8 wrote:
Waitman Gobble wrote:
On Feb 6, 2013 7:17 AM, Fbsd8 fb...@a1poweruser.com wrote:
Waitman Gobble wrote:
On Feb 6, 2013 7:02 AM, Fbsd8 fb...@a1poweruser.com wrote:
Where do I find the descriptions of what these jail MIBs do?
security.jail.param.allow.mount.zfs: 0
a core parameters, and kernel modules can add their
| own jail parameters. The current set of available parameters can be
| retrieved via ``sysctl -d security.jail.param''. Any parameters not
| set will be given default values, often based on the current
| environment.
The sysctls do
, though, I think
the natural place for retrieving such a value would most likely be
using sysctl. Maybe it would be OK to add two new entries to the
sysctl tree: hw.wordbits and kern.wordbits, or something similar
to the basic sysctl variables. The value should be just one constant
number, usually
Hello,
I would like to get the dev.cpu.0.temperature node from sysctlbyname().
It seems this node is an opaque type but how to check it and store it to
the appropriate variable type ?
Cheers,
--
David Demelier
___
freebsd-questions@freebsd.org
the source. I did that some time ago
to fix the temperature display in sysutils/conky.
The sysctl dev.cpu.0.temperature returns an integer, see
/sys/dev/coretemp/coretemp.c (look for the string temperature), and you'll
see:
/*
* Add the temperature MIB to dev.cpu.N
?
The best way to determine this is to read the source. I did that some time ago
to fix the temperature display in sysutils/conky.
The sysctl dev.cpu.0.temperature returns an integer, see
/sys/dev/coretemp/coretemp.c (look for the string temperature), and you'll
see:
/*
* Add
Hello,
Since I cannot adjust the brightness on my HP Probook because it sucks
I'm writing a small script that can be use instead. I need to sysctl
the following sysctl variables :
hw.acpi.video.lcd0.brightness
hw.acpi.video.lcd0.levels
the -brightness one is easy since it's an integer
In the last episode (Nov 24), David DEMELIER said:
Since I cannot adjust the brightness on my HP Probook because it sucks
I'm writing a small script that can be use instead. I need to sysctl
the following sysctl variables :
hw.acpi.video.lcd0.brightness
hw.acpi.video.lcd0.levels
2010/11/24 Dan Nelson dnel...@allantgroup.com:
In the last episode (Nov 24), David DEMELIER said:
Since I cannot adjust the brightness on my HP Probook because it sucks
I'm writing a small script that can be use instead. I need to sysctl
the following sysctl variables :
hw.acpi.video.lcd0
Hi, Freebsd-questions.
net.isr.swi_count: -1692211928
as I think count can not be negative. in this case it is.
Is this a bug or negative value means some special?
--
С уважением,
Коньков mailto:kes-...@yandex.ru
___
for net.isr.swi_count which you managed to overrun.
i'm running HEAD and that sysctl parameter doesn't exist:
otaku% sysctl net.isr.swi_count
sysctl: unknown oid 'net.isr.swi_count'
seems pluknet posted the same one year ago [1]
cheers.
alex
[1] http://markmail.org/message/qc34d5z6uyyet7nx
Hi all,
I used to change my CPU speed via sysctl:
sysctl dev.cpu.0.freq=1650
I did that because that helped me to decrease the CPU temperature, and such
speed was enough. This way went well and I did that after logging into the
system via ssh. (I have some troubles with `powerd` so I
│
│sysctl kern.geom.debugflags=16 and try again
any ideas?
Cheers!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
│
│sysctl kern.geom.debugflags=16 and try again
any ideas?
At a guess, I'd say you need to set
sysctl kern.geom.debugflags=16
and try again...
Matthew
--
Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard
Hello,
Sometimes when I send a message with pidgin, or evolution, the
application shuts down.
Is there an option with sysctl, that would prevent this to happen?
I'm running FreeBSD 7.2 stable - gnome2
Regards,
Roy.
___
freebsd-questions@freebsd.org
Hello,
Sometimes when I send a message with pidgin, or evolution, the
application shuts down.
Is there an option with sysctl, that would prevent this to happen?
I'm running FreeBSD 7.2 stable - gnome2
Regards,
Roy.
___
freebsd-questions@freebsd.org
On Sun, 05 Jul 2009 01:36:33 +0200
Roy Stuivenberg roys1...@gmail.com wrote:
Hello,
Sometimes when I send a message with pidgin, or evolution, the
application shuts down.
Is there an option with sysctl, that would prevent this to happen?
sysctl is an interface to the kernel, it doesn't
I need use more 128 000 kern.maxfilesperproc for the process how can i
calculate hardware for this purpose (RAM i think)? will use 7.1, 7.2
AMD64
Thanks for help
Regards
Valentin
___
freebsd-questions@freebsd.org mailing list
After searching google and various man pages, I'm not finding out what
it actually means, anyone care to shed some light?
During boot:
dmesg: sysctl kern.msgbuf Cannot allocate memory
#sysctl -a |grep msgbuf
kern.msgbuf_clear: 0
kern.msgbuf:
kern.consmsgbuf_size: 8192
Hi, Freebsd-questions.
This change
sysctl net.inet.ip.dummynet.io_fast=1
has no effect for packet flow, bug man says:
Fast mode allows certain packets to bypass dummynet scheduler if packet flow
does not exceed pipe's bandwidth
flow does not exceed pipe limit, but packet flow latency
hi...
what is the exact function of this sysctl setting?
I'm guessing it's something to do with Xen, having seen a few
references in Linux for xen.machdep.independent_wallclock.
Have a look here:
http://docs.xensource.com/XenServer/4.0.1/guest/ch04s06.html
yeah, I know
hi...
what is the exact function of this sysctl setting?
I couldn't find any documentation on it.
greetz
olli
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
2009/1/14 Mister Olli mister.o...@googlemail.com
hi...
what is the exact function of this sysctl setting?
I'm guessing it's something to do with Xen, having seen a few references in
Linux for xen.machdep.independent_wallclock.
Have a look here:
http://docs.xensource.com/XenServer/4.0.1/guest
Eitan Shefi eit...@mellanox.co.il writes:
I run sysctl -a | less
why?
DES
--
Dag-Erling Smørgrav - d...@des.no
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
I am testing a NIC driver.
I found it's logs and /var/log/messages logs in the output of sysctl
-a:
I run sysctl -a | less, and there I find:
kern.devstat.version: 6
kern.devstat.generation: 137
kern.devstat.numdevs: 1
kern.kobj_methodcount: 143
kern.log_wakeups_per_second: 5
kern.msgbuf_clear
On Wed, 7 Jan 2009 13:30:20 +0200
Eitan Shefi eit...@mellanox.co.il wrote:
I am testing a NIC driver.
I found it's logs and /var/log/messages logs in the output of sysctl
-a:
I run sysctl -a | less, and there I find:
kern.devstat.version: 6
kern.devstat.generation: 137
On Wed, 7 Jan 2009, 13:14+0100, Gary Jennejohn wrote:
On Wed, 7 Jan 2009 13:30:20 +0200
Eitan Shefi eit...@mellanox.co.il wrote:
I am testing a NIC driver.
I found it's logs and /var/log/messages logs in the output of sysctl
-a:
I run sysctl -a | less, and there I find
You are looking at the kernel message buffer with 'sysctl -a'.
(kern.msgbuf).
Nothing wrong with that.
//Remko
--
/\ Best regards,| re...@freebsd.org
\ / Remko Lodder | re...@efnet
Xhttp://www.evilcoder.org/|
/ \ ASCII Ribbon
On Wednesday 07 January 2009 12:30:20 Eitan Shefi wrote:
I am testing a NIC driver.
I found it's logs and /var/log/messages logs in the output of sysctl
-a:
I run sysctl -a | less, and there I find:
kern.devstat.version: 6
kern.devstat.generation: 137
kern.devstat.numdevs: 1
On Wed, Jan 07, 2009 at 01:30:20PM +0200, Eitan Shefi wrote:
I am testing a NIC driver.
I found it's logs and /var/log/messages logs in the output of sysctl
-a:
I run sysctl -a | less, and there I find:
[..]
kern.msgbuf: ound file system checks in 60 seconds.
118
mtnic0: FW version:2.6.0
Hello maillist,
I have to small question
- Where i can get documentation for description some base sysctl variables?
- And, what the diffrence between
sysctl hw.machine hw.machine_arch
?
For example, i extract i386 installation, but my hardware is EM64T and
supporting AMD64 distribution
Ole wrote:
Hello maillist,
I have to small question
- Where i can get documentation for description some base sysctl variables?
- And, what the diffrence between
sysctl hw.machine hw.machine_arch
?
try sysctl -d $oid
for example:
[EMAIL PROTECTED]
(10:23:56 ~) 0 $ sysctl -d
On my FreeBSD 6 box, sysctl kern.msgbuf shows the same content as dmesg
But on FreeBSD 7, kern.msgbuf is empty.
Has something changed?
Thanks,
Skye
--
View this message in context:
http://www.nabble.com/sysctl-kern.msgbuf-changed-in-7.0--tp19679848p19679848.html
Sent from the freebsd
For no apparent reason, the following error message has suddenly
started showing up when I reboot the machine:
sysctl: unknown oid 'net.fibs'
I am running FBSD-6.3 presently. Is this error important and if so,
what can I do to correct it?
Thanks!
--
Gerard
[EMAIL PROTECTED]
All extremists
On Tue, 2 Sep 2008 11:11:20 -0400, Gerard [EMAIL PROTECTED] wrote:
For no apparent reason, the following error message has suddenly
started showing up when I reboot the machine:
sysctl: unknown oid 'net.fibs'
I am running FBSD-6.3 presently. Is this error important and if so,
what can I
On Tue, 2 Sep 2008 11:11:20 -0400
Gerard [EMAIL PROTECTED] wrote:
For no apparent reason, the following error message has suddenly
started showing up when I reboot the machine:
sysctl: unknown oid 'net.fibs'
I am running FBSD-6.3 presently. Is this error important and if so,
what can I
package?
% sysctl net.fibs
net.fibs: 1
In /usr/include/net/route.h, something regarding FIBS is mentioned...
I could not find any mention of it in the 'route.h' file, nor is there
anything in the 'sysctl.conf' file. The message is displayed just
before the 'login' prompt.
How can
On Tue, 2 Sep 2008 17:15:18 +0100
RW [EMAIL PROTECTED] wrote:
Do you have apache?
http://groups.google.com/group/mailing.freebsd.ports-bugs/browse_thread/thread/b8f17e78869e738f
Yes, and come to think about it, this problem just started happening
after I updated it. I assume that the patch
seems to have something
to do with multiple routing tables, a feature that needs to be
enabled via a kernel option; I'm not sure if this has been present
in FreeBSD 6 already.
[...] nor is there
anything in the 'sysctl.conf' file.
So the setting isn't requested via /etc/rc.d/sysctl at startup
I've installed HAL and the same message comes up with the gnome desktop- and
this happens in the install of NetBSD that I also have- the HAL problem of not
being enabled or installed.
I may be wrong in assuming this; but, isn't there some basic compatibility
between bsd systems that what would
Desmond Chapman wrote:
The media shows up in konqueror as a normal user but I cannot mount it. there is no reference to hal with an apropos search except for ath_hal.
What am I doing wrong? What else do I add to make the cd easily mountable?
The media shows up in konqueror as a normal user but I cannot mount it. there
is no reference to hal with an apropos search except for ath_hal.
What am I doing wrong? What else do I add to make the cd easily mountable?
_
The i’m
aJTiM writes:
I am running FreeBSD 7 beta4. When I start a computer and os
loading I got one message which I don't know why and how could I
save a problem if it is a problem. Beta 4 works very good and I
don't have problems.
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest
Hi!
I am running FreeBSD 7 beta4. When I start a computer and os loading I got one
message which I don't know why and how could I save a problem if it is a
problem. Beta 4 works very good and I don't have problems.
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
.
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
Thanks in advance.
--
It just doesn't seem right to go over the river and through the woods
to Grandmother's condo.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org
. Beta 4 works very good and I don't have problems.
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
Thanks in advance.
--
It just doesn't seem right to go over the river and through the woods
to Grandmother's condo
On 9/9/07, Bogdan Potishuk [EMAIL PROTECTED] wrote:
George Vanev said the following on 30.08.2007 12:22:
Hi,
I tried to build a custom kernel, but i get the following error on boot up:
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
I have updated
George Vanev said the following on 30.08.2007 12:22:
Hi,
I tried to build a custom kernel, but i get the following error on boot up:
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
I have updated the source tree.
I tried to compile and install /usr/src/sys/i386
Hi,
I tried to build a custom kernel, but i get the following error on boot up:
hw.acpi.cpu.cx_lowest: C1
sysctl: hw.acpi.cpu.cx_lowest: Invalid argument
I have updated the source tree.
I tried to compile and install /usr/src/sys/i386/conf/GENERIC and
/usr/src/sys/i386/conf/SMP
The same error
Hello,
I was able to use this command in 6.x
Now when I tried it it doesn't work in 7.0
sysctl kern.threads.max_groups_per_proc=4
What is the similar command in 7.0-CURRENT?
I need this to tweak MySQL.
--
Regards,
-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net
Hello,
I was able to use this command in 6.x
Now when I tried it it doesn't work in 7.0
sysctl kern.threads.max_groups_per_proc=4
What is the similar command in 7.0-CURRENT?
I need this to tweak MySQL.
It has beend removed six month ago with the following notice:
[remove] Any
On Sun, May 27, 2007 at 06:37:43PM +0300, Abdullah Ibn Hamad Al-Marri wrote:
Hello,
I was able to use this command in 6.x
Now when I tried it it doesn't work in 7.0
sysctl kern.threads.max_groups_per_proc=4
What is the similar command in 7.0-CURRENT?
I need this to tweak MySQL
Hi list,
When reading through my dmesg, I found this sysctl error/message : sysctl :
hw.acpi.cpu.cx_lowest : Invalid argument. Now there is no mention what so
ever of that option in my /etc/sysctl.conf, so I didn't set it to C1 or
anything else that seems to be invalid. So my question is : why
Beni wrote:
Hi list,
When reading through my dmesg, I found this sysctl error/message : sysctl :
hw.acpi.cpu.cx_lowest : Invalid argument. Now there is no mention what so
ever of that option in my /etc/sysctl.conf, so I didn't set it to C1 or
anything else that seems to be invalid. So my
On Wednesday 11 April 2007 18:26:20 Kevin Kinsey wrote:
Beni wrote:
Hi list,
When reading through my dmesg, I found this sysctl error/message : sysctl
: hw.acpi.cpu.cx_lowest : Invalid argument. Now there is no mention what
so ever of that option in my /etc/sysctl.conf, so I didn't set
Hello all,
i have a Server which does mail, and web+mysql+php. I have about 15
vhosts in Apache. Are there some neat sysctl Knobs i can turn to
avoid potential Problems?
Thanks a lot,
David
___
freebsd-questions@freebsd.org mailing list
http
*Handler Int
Those seem to correspond to sysctl variables.
Any idea why the kernel would start spitting out sysctl mibs to the log?
Thanks,
Charles
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
:
sockstat: sysctl(): No such process
i do not understand why i get this only sometimes, and what this
exactly means.
i hope someone can help me and explain this behaviour
thanks,
reinhard
--
What sane person could live in this world and not be crazy?
-- Ursula K. LeGuin
times a day,
cronjob runs every 11 minutes - the message:
sockstat: sysctl(): No such process
i do not understand why i get this only sometimes, and what this
exactly means.
Sockstat first gets a list of all open sockets, then looks up the
command name for each one. If the process has
this is of no importance
for this question), i get from time to time - about 3-4 times a day,
cronjob runs every 11 minutes - the message:
sockstat: sysctl(): No such process
i do not understand why i get this only sometimes, and what this
exactly means.
Sockstat first gets a list
On Friday 28 July 2006 06:15, User Freebsd wrote:
Two part question here ...
first part ... is there a way of just disabling icmp by setting a sysctl,
so that a server just doesn't respond to them?
No. You can do this using the firewall of your choice
ipfw example
ipfw add deny icmp from any
On Friday 28 July 2006 06:26, User Freebsd wrote:
Just an appendum, but this is what I'm seeing in /var/log/messages right
now:
Jul 28 00:22:37 io kernel: Limiting icmp unreach response from 6255 to 200
packets/sec Jul 28 00:22:38 io kernel: Limiting icmp unreach response from
6515 to 200
User Freebsd wrote:
Two part question here ...
first part ... is there a way of just disabling icmp by setting a
sysctl, so that a server just doesn't respond to them?
second part ... is there a way of telling a cisco switch to drop all
icmp packets, preferrably to all but an exception
Bill Moran wrote:
User Freebsd wrote:
Two part question here ...
first part ... is there a way of just disabling icmp by setting a
sysctl, so that a server just doesn't respond to them?
second part ... is there a way of telling a cisco switch to drop all
icmp packets, preferrably to all
Two part question here ...
first part ... is there a way of just disabling icmp by setting a sysctl,
so that a server just doesn't respond to them?
second part ... is there a way of telling a cisco switch to drop all icmp
packets, preferrably to all but an exception list, but to everywhere
icmp unreach response from 6646 to 200
packets/sec
^C
And its been going on for several hours now ... :(
On Fri, 28 Jul 2006, User Freebsd wrote:
Two part question here ...
first part ... is there a way of just disabling icmp by setting a sysctl, so
that a server just doesn't respond to them
Hello
I have 2 server . I use FreeBSD6.1 and Freebsd6.0 on them.
1 - Is there any program or command about how much the server use the
parameters sysctl values and whether the server exceed the sysctl limits or not
?
can you say a command or tool except top, ps, netstat -m ?
2 - While I am
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm seeing a lot of messages like this in my Message log.
adjkerntz[]: sysctl(get_offset): No such file or directory
I don't think that this is a porblem as I'm not seeing any ill effects, but
I'd like to know what this means and why it's
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 18 June 2006 8:28 am, Rod Person wrote:
Machine is an AMD Dual Opteron 246 running FreeBSD 6.1 Stable i386.
Sorry, It's FreeBSD 7.0 Current i386 - it's a dual boot and I got confused :)
- --
Rod Person
http://www.opensourcebeef.net
Sun, 18 Jun 2006 08:50:03 -0400, Rod Person wrote:
On Sunday 18 June 2006 8:28 am, Rod Person wrote:
Machine is an AMD Dual Opteron 246 running FreeBSD 6.1 Stable i386.
Sorry, It's FreeBSD 7.0 Current i386 - it's a dual boot and I got
confused :)
Are you read src/UPDATING?
--
Regards,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 18 June 2006 11:01 am, Andrey Slusar wrote:
Sun, 18 Jun 2006 08:50:03 -0400, Rod Person wrote:
On Sunday 18 June 2006 8:28 am, Rod Person wrote:
Machine is an AMD Dual Opteron 246 running FreeBSD 6.1 Stable i386.
Sorry, It's
I'm using net-snmpd with FreeBSD 6.0 and all is working fine but when I start
it up it gives me the following error:
sysctl: physmem: Cannot allocate memory
snmpd seems to be running fine but why is that error showing when it's
started?
I looked at the sysctl and it's showing the proper amount
Any advice on adding new sysctl to the system ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi all,
I have a question regarding the output from sysctl kern.cp_time.
I know that the output is in the form of:
user nice sys interrupt idle
and that the numbers are incremental, but what I don't know is what
these numbers and increments mean.
If someone could explain this, it is greatly
olsr.freifunk.net channel 10 bssid 02:09:0b:66:82:a5
stationname foobar-e0
authmode OPEN privacy OFF txpowmax 100 bintval 100
net.wlan.debug had before set been to 1
then this causes the os to freeze:
sysctl net.inet6.ip6.fw.deny_unknown_exthdrs1-0
any ideas?
ip6fw show
00100407
net.inet.ipf.fr_tcpclosed=60
net.inet.ipf.fr_tcphalfclosed=300
net.inet.ipf.fr_udptimeout=90
net.inet.ipf.fr_icmptimeout=35
and work fine ,but in the machine of freebsd6.0 ,when boot up ,the system
tall me the device is busy ,and the sysctl env is not alive .i think write
it to the file /boot/loader.conf
where can i find documentation for sysctl variables, mostly vfs.* ?
or it it's nonexistant, where can i look for info?
While FreeBSD gives best performance in every case i tested (compared to
other BSD's and linux) it doesn't mean it can't be faster after some
tuning
According to the manual page of sysctl - the best place to find the
documentation is the source. But chapter 11 (sounds funny ;) ) in the
handbook might also help you (the tuning sections).
Thomas
-Ursprungligt meddelande-
Från: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] För Wojciech
Wojciech Puchar wrote:
where can i find documentation for sysctl variables, mostly vfs.* ?
or it it's nonexistant, where can i look for info?
sysctl -d will help in many cases, otherwise check the manpage for the
associated driver, netgraph module, etc. Or UTSL. :-)
While FreeBSD gives
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
for some reason, my dmesg output is filled with what looked sysctl
options:
[/usr/home/paul]:: dmesg
14 fastforwarding RW *Handler Int
15 keepfaith RW *Handler Int
100 subnets_are_local RW *Handler Int
101 fw RW Node
structure (ie: .. or /path/to/..), but fails if the
symbolic link is located elsewhere (ie: /usr/local/path/directory) or on
another disk.
It is the `normal' behaviour for Apache, AFAIK.
I wonder if there's a sysctl or other system variable that handles the
behavior of or access to symbolic links
structure (ie: .. or /path/to/..), but fails if
the symbolic link is located elsewhere (ie: /usr/local/path/directory)
or on another disk.
I wonder if there's a sysctl or other system variable that handles the
behavior of or access to symbolic links in this fashion that I may
have missed
directory structure (ie: .. or /path/to/..), but fails if the symbolic
link is located elsewhere (ie: /usr/local/path/directory) or on another disk.
I wonder if there's a sysctl or other system variable that handles the
behavior of or access to symbolic links in this fashion that I may have
missed
a sysctl or other system variable that handles the
behavior of or access to symbolic links in this fashion that I may have
missed. Seemed like a reasonable conclusion after these tests have
been failing, though it could be something else, too.
Don't know if it is possible (and advisable
if the
symbolic link is located elsewhere (ie: /usr/local/path/directory) or on
another disk.
I wonder if there's a sysctl or other system variable that handles the
behavior of or access to symbolic links in this fashion that I may have
missed. Seemed like a reasonable conclusion after
Hello,
I've added:
kern.randompid=1
to my /etc/sysctl.conf file, but on boot the value isn't reset it's still
zero, does anyone know why i can't reset this value? The box is not
operating at an increased security level.
Thanks.
Dave.
___
At 11:08 AM 8/17/2005, dave wrote:
Hello,
I've added:
kern.randompid=1
to my /etc/sysctl.conf file, but on boot the value isn't reset it's still
zero, does anyone know why i can't reset this value? The box is not
operating at an increased security level.
It's probably read only. Try
I'm a bit confused about whcih options needs to be set where.
I know i.e. that hw.ata.atapi_dma=1 needs to be set
in /boot/loader.conf while others are set in /etc/sysctl.conf. I need
to know where I can find info on the rules about this. Now I'm
dependant on what I happen to read somewhere.
I
about this. Now I'm
dependant on what I happen to read somewhere.
Well, sysctl(8) refers to loader.conf(5), sysctl.conf(5), loader(8),
which refer to /boot/defaults/loader.conf /etc/sysctl.conf and
don't forget the handboot and FAQ.
I read something about vfs.read_max=16 - where do I set this I
vfs.read_max=16 - where do I set this I
wonder? Is there info about this somewhere?
Look at /boot/defaults/loader.conf, that ought to give you a good
idea of what needs to be (or can be) set via that. Otherwise, try
using sysctl to change things, and if they are marked read-only, then
they needed
On Wed, 03 Aug 2005 10:48:04 -0700
[EMAIL PROTECTED] (Gary W. Swearingen) wrote:
Since sysctl.conf is read in only when going multi-user and that
sounds like something you'd want always, I'd put it in loader.conf.
Not so. I tried /boot/loader.conf but vfs.read_max still was default
after the
In the BSD/OS there is a kernel countdown counter that can be used
to reboot the machine in case of lock. It´s called deadmantimer.
I used to put a cron entry to preset this counter every 3 min, so
if it goes to zero the server is rebooted.
In the past it save me some times.
1 - 100 of 191 matches
Mail list logo