-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On Thu, 30 Jun 2005 21:59:14 -0700 (PDT) Philip Hallstrom [EMAIL PROTECTED]
wrote:
On 6/26/05, Anthony Chavez [EMAIL PROTECTED] wrote:
I've got a client that would like to be able to connect to VNC servers
behind a FreeBSD gateway. Said
Hello everyone
I'm searching for PCMCIA bridge to PCI wich one work on FreeBSD
All recommendations are WELCOME :-)
Thanks
--
Pagarbiai / Best regards
Mantas Smelevicius
http://mantas.lt
___
freebsd-questions@freebsd.org mailing list
I know this doesn't particularly pertain to FreeBSD, but I'm not
sure where I can ask...
I started a while back on a set of filters to convert html,
multipart, alternative email (any email containing HTML) to an
alternative form of HTML. From there, my intention was to
convert it right back
What about postfix vs Courier Mail Server ???
On 6/30/05, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of MikeM
Sent: Wednesday, June 29, 2005 6:13 AM
To: freebsd-questions@freebsd.org
Subject: Re:
Hi,
I followed http://people.freebsd.org/~rse/mirror/ to create a software
RAID mirror. I have two 75G drives in the machine. I allocated 74G to
the filesystem on each drive and 1 G to swap. When I blanked ad1 and
created ad1s1, I didn't notice that it had taken up the whole of the
drive. Can
Hello,
I've got a 5.4-RELEASE box with a usb2 connected hard disk. On this disk
which is formatted ext2fs is about 8 gigs of data i want to copy over. I
mount the disk readonly and issue
cp -R
well around the 1.2g mark i start getting
cmd_errors cp -R
in /var/log/messages and i have to kill
There is a chapter about installing
and running Linux software in the
FreeBSD handbook. In 10.5 they describe
installation of Matlab 6.5. May be
that helps.
Norbert
-Original Message-
From: Rodolphe Conan [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 29, 2005 6:48 PM
To: Norbert
On Fri, 2005-07-01 at 15:38 +1000, Warren wrote:
im running FreeBSD 5.4-STABLE CVSUPD and everything updated as of about 3 hrs
ago.
Each time i try and update Azureus from 2.2.0.2 to 2.3.0.4 it fails and on
restart sais to check the update.log which dosent exist. I have tried
Ryan Rempel wrote:
*/5 * * * * fetchmail -s -f /usr/local/etc/fetchmailrc
Now, if you want each user to be able to administer their own
fetchmailrc, then I don't know how to do that without having each user
run fetchmail individually.
wrap the fetchmail -f with a loop over user's home dirs
Each time i try and update Azureus from 2.2.0.2 to 2.3.0.4 it fails and
on restart sais to check the update.log which dosent exist. I have tried
re-installing Azureus from scratch running it as root and even as far as
giving everything possible assoicated with it to chmod +777 and still
On Fri, 1 Jul 2005 5:42 pm, Andreas Rudisch wrote:
On Fri, 2005-07-01 at 15:38 +1000, Warren wrote:
im running FreeBSD 5.4-STABLE CVSUPD and everything updated as of about 3
hrs ago.
Each time i try and update Azureus from 2.2.0.2 to 2.3.0.4 it fails and
on restart sais to check the
Message: 19
Date: Fri, 1 Jul 2005 00:15:20 -0500
From: Ryan Rempel [EMAIL PROTECTED]
Subject: Re: system wide fetchmail
To: Free BSD Questions list freebsd-questions@freebsd.org
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=ISO-8859-1
On 6/30/05, stan [EMAIL PROTECTED] wrote:
dave wrote:
Hello,
I've got a 5.4-RELEASE box with a usb2 connected hard disk. On this disk
which is formatted ext2fs is about 8 gigs of data i want to copy over. I
mount the disk readonly and issue
cp -R
well around the 1.2g mark i start getting
cmd_errors cp -R
in /var/log/messages and i
Josh Ockert wrote:
I'm not so sure you guys have this right.
No BSD-licensed code is allowed to use a GPL library and remain
BSD-licensed. According to the GPL, Section 2:
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the
On Thu, 2005-Jun-30 17:18:15 -0400, Simon wrote:
It's not only CPU factor, I don't trust software RAID.
I suspect you don't have a choice. Either the RAID is done in the kernel
on your host system or the RAID is done in the the firmware on your RAID
card. In either case, it's software.
--
Hello
I have a strange problem with a FreeBSD 5.4 NFS client
I have installed nss_ldap and pam_ldap then configure the
/etc/pam.d/login file as follows :
#
# $FreeBSD: src/etc/pam.d/login,v 1.16 2003/06/14 12:35:05 des Exp $
#
# PAM configuration for the login service
#
# auth
auth
On 7/1/05, fbsd_user [EMAIL PROTECTED] wrote:
Is there a way in 5.4 ipfw2 to reset/delete/clear a stateful rule's records
in the state table?
Never tried this myself, but probably by temporarily lowering
net.inet.ip.fw.dyn_*_lifetime?
--
Dmitry
We live less by imagination than despite it -
On Fri, 2005-07-01 at 18:18 +1000, Warren wrote:
ok, this worked an updated the Azureus version, but now not one of my
torrents
is downloading, even though there all showing green and testing the ports
from 6881-6889 all work in the NAT/Firewall test and were all downloading
before
On Fri, 2005-07-01 at 11:33 +0200, Andreas Rudisch wrote:
On Fri, 2005-07-01 at 18:18 +1000, Warren wrote:
ok, this worked an updated the Azureus version, but now not one of my
torrents
is downloading, even though there all showing green and testing the ports
from 6881-6889 all work
On Friday 01 July 2005 07:22, Ryan Rempel wrote:
On 6/30/05, Gerard Seibert [EMAIL PROTECTED] wrote:
I am unable to get phpMyAdmin to run. I have these entries in the
httpd.conf file.
Directory /usr/local/www/data/beerstud/htdocs
Alias /phpmyadmin/ /usr/local/www/phpMyAdmin/
Simon wrote:
Just because there is no monitoring tool available due to lack of support,
doesn't
mean the card itself is bad.
You wouldn't be saying that if you had had one of your RAIDed drives
fail and had no indication whatsoever that it had done so. IMHO, OS
level monitoring of a RAID
On Thu, 30 Jun 2005, Danny Howard wrote:
P.U.Kruppa wrote:
As far as I can see, booting from gm0 works fine. There are only two
questions left:
1) I installed FreeBSD 5.4 -RELEASE and thus I put - as
recommended (or was that only for 5.3 ???) - swapoff=YES into
my /etc/rc.conf .
Since version 2.2.0.3_B60 Azureus does NOT work with Java 1.5 correctly
anymore, so you will have to edit the azureus start
script /usr/local/bin/azureus to use Java 1.4:
find and change the following variable: JAVA_VERSION=1.4+
oh, and make sure you have Java 1.4 installed of course.
On 6/26/05, Bob Bomar [EMAIL PROTECTED] wrote:
I am looking to build a new file server. I have used
Promise cards exclusivly in the past, but I am looking
at Highpoint cards for this machine. Anybody have any
opinions on RAID cards?
I've had no real trouble with the Highpoint 1540 SATA
On Jun 30, 2005, at 9:46 AM, Odhiambo Washington wrote:
* Bart Silverstrim [EMAIL PROTECTED] [20050630 15:58]: wrote:
Silly question...
If I want to rebuild amavisd-new and ALL p5 ports that amavis uses (so
I can make sure they are seeing the upgraded PERL version properly),
would I just use
Hi All,
I need to establish an IPSec tunnel between two
FreeBSD systems, using IPv6 addresses.The connetcion
is
host-to-host between two FreeBSD( RELEASE 4.11)
systems with KAME IPSec implementation.
I tried to establish the connection, but it has some
problems which are explained below.
Jun 30 10:36:05 phantom sshd[70478]: Failed password for news from
212.88.182.121 port 51218 ssh2
Jun 30 10:36:16 phantom sshd[70500]: Failed password for sshd from
212.88.182.121 port 51608 ssh2
Jun 30 10:36:39 phantom sshd[70569]: Failed password for root from
212.88.182.121 port 52297 ssh2
On 01/07/05, Bart Silverstrim [EMAIL PROTECTED] wrote:
On Jun 30, 2005, at 9:46 AM, Odhiambo Washington wrote:
* Bart Silverstrim [EMAIL PROTECTED] [20050630 15:58]: wrote:
Silly question...
If I want to rebuild amavisd-new and ALL p5 ports that amavis uses (so
I can make sure they
Hi,
I have timeout problems with SATA. I have searched the archives and
the net and found that I am not alone, but I could not find any useful
answers on what to do about it.
I am running 5-STABLE (from yesterday) on an Intel 916PCM (ICH6). I
have a Plextor DVD burner (As for the hard drive, I
Below (and atached) is a script I wrote do exactly what you are talking about.
It's commented, so edit to your taste. I have been using to for about 4 months.
Since I am using PF as my firewall, it is customized for that. If you
are using something other then PF, again... edit to your taste.
they are originating from the high ports, arriving on port 22 at your
box. this is normal. in a default setup sshd only listens on port 22.
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Cholewa
Sent: Friday, July
he is using 4.8, unless things have changed, pf is not available
on 4.x
PS: Oh, yeah ... FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003 ;
openssh-3.6.1_5 ; openssl-0.9.7d_1
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Jack Raats wrote:
I've a little question. After upgrading perl to 5.8.7. I'm getting an error
of Apache. It says
Syntax error on line 239 of /usr/local/etc/apache/httpd.conf:
Cannot load /usr/local/libexec/apache/libperl.so into server: Shared object
libperl.so not found, required by
Greg 'groggy' Lehey wrote:
On Thursday, 30 June 2005 at 20:13:30 +0200, Sam Gonfle wrote:
thanks
People, please do not do this. It's an incredible waste of time and
bandwidth. We have the test@ list for exactly this purpose.
Too true. Now, how do people find out about [EMAIL
Defending Against Attacks
A firewall is your first line of defense, But if you allow public
access to ports 22, SSH (secure shell), 23, Telnet, or 21, FTP these
ports can be bombarded with login attempts using common ID/PW
combinations probing for access. In the case of port 80, Web server
it
So just because this guy was considerate and said 'test' in his
subject he gets criticized. But all the posts to this list for
selling drugs we all just ignore with no comments. And what good is
posting to the 'test' list when the sole purpose of a test post to
the questions list is to verify his
All,
I understand the difference between STABLE and CURRENT but I am a
bit confused about the RELENG_5 branch. Is this just another name for
the 5.x STABLE branch or is it used for something completely different?
I have a production server that is running 5.4-RELEASE but requires a
few
On 2005-07-01 10:37, Matthew Grooms [EMAIL PROTECTED] wrote:
All,
I understand the difference between STABLE and CURRENT but I am a
bit confused about the RELENG_5 branch. Is this just another name
for the 5.x STABLE branch or is it used for something completely
different?
Yes, RELENG_5 is
On Fri, Jul 01, 2005 at 12:13:50PM +0200, P.U.Kruppa wrote:
swapoff=YES
into /etc/rc.conf -since it was recommended. It is still there
can I remove it now or will there be any problems?
I think they might have fixed that in 5.4, but it doesn't huirt to
have it there. I've been careful to run
I say burn 'em on the cross. Why do you need to test to see if you can post
before you actually post a question? If your first question/comment doesn't
go through, you know it's not working. And subsequent tests can be the same
question/comment with a datestamp.
Just my 2 cents.
James
--On Thursday, June 30, 2005 14:10:55 -0400 Eric Ekong [EMAIL PROTECTED]
wrote:
* Eric Ekong [EMAIL PROTECTED] [050629 23:18]:
I am having issues getting dual head to work with this card and
freebsd 5.4-STABLE. I previously had it working with the G550
with no problem. I am using Xorg with
I have followed the FreeBSD handbook procedure to install Matlab 7.0.
There are apparently big changes between 6.5 and 7.
I have used Matlab of FreeBSD since version 5 and it is the first time I
can't run a new matlab version on FreeBSD.
Rod
On Fri, 2005-07-01 at 09:32 +0200, Norbert Koch
I say burn 'em on the cross. Why do you need to test to see if you can post
before you actually post a question? If your first question/comment doesn't
go through, you know it's not working. And subsequent tests can be the same
question/comment with a datestamp.
Just my 2 cents.
Now
In the last episode (Jul 01), Frank Bonnet said:
Hello
I have a strange problem with a FreeBSD 5.4 NFS client
I have installed nss_ldap and pam_ldap then configure the
/etc/pam.d/login file as follows :
# auth
authrequiredpam_nologin.so no_warn
auth
On Friday 01 July 2005 10:29, fbsd_user wrote:
So just because this guy was considerate and said 'test' in his
subject he gets criticized. But all the posts to this list for
selling drugs we all just ignore with no comments. And what good is
posting to the 'test' list when the sole purpose of
One of my local cvsup mirrors ahs started failing it's synch with:
Edit CVSROOT-src/modules,v
Updater failed: CVSROOT-src/modules,v: Error deleting delta: 60368: Num
expect ed
CVSup update ends at 2005-07-01 12:38:44
What do I need to do to correct this?
--
U.S. Encouraged by Vietnam Vote
Hello,
I was following procedure2 of the gmirror howto located at:
http://people.freebsd.org/~rse/mirror/
and had got to the part where i was copying the data from the first to the
second disk. I did:
dump -L -0 -f- /usr | (cd /mnt/usr; restore -r -v -f-)
which went for a while then hung.
How to get the best results from FreeBSD questions.
===
Last update $Date: 2004/09/19 02:40:48 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
Hi all,
How can I do to make 'ps' to show the entire command of some
process the is showed in [command].
In the 4.x boxes I was able to see complete command line, now in
5.4 it´s shown in backets.
- Marcelo
___
On Jul 1, 2005, at 3:19 AM, Peter Jeremy wrote:
On Thu, 2005-Jun-30 17:18:15 -0400, Simon wrote:
It's not only CPU factor, I don't trust software RAID.
I suspect you don't have a choice. Either the RAID is done in the
kernel
on your host system or the RAID is done in the the firmware
On 7/1/05, Thomas Ludwig [EMAIL PROTECTED] wrote:
Hi,
I have timeout problems with SATA. I have searched the archives and
the net and found that I am not alone, but I could not find any useful
answers on what to do about it.
...
Recently there was a thread on these lists that indicated, if
On 6/30/05, Bryan Maynard [EMAIL PROTECTED] wrote:
I checked out the man pages you listed, thanks for the help!
I didn't understand everything in all of them, but they did help me firgure
out some more questions to ask.
Is it possible to identify all hardware component in my system in the
On 7/1/05, Matthew Grooms [EMAIL PROTECTED] wrote:
All,
I understand the difference between STABLE and CURRENT but I am a
bit confused about the RELENG_5 branch. Is this just another name for
the 5.x STABLE branch or is it used for something completely different?
I have a production
Jerry McAllister wrote:
I say burn 'em on the cross. Why do you need to test to see if you can post
before you actually post a question? If your first question/comment doesn't
go through, you know it's not working. And subsequent tests can be the same
question/comment with a datestamp.
Just
What's wrong with top posting? ;-)
On 7/1/05, Robert Marella [EMAIL PROTECTED] wrote:
Jerry McAllister wrote:
I say burn 'em on the cross. Why do you need to test to see if you can post
before you actually post a question? If your first question/comment doesn't
go through, you know it's not
On Friday 01 July 2005 13:30, Robert Marella wrote:
Jerry McAllister wrote:
I say burn 'em on the cross. Why do you need to test to see if you can
post before you actually post a question? If your first
question/comment doesn't go through, you know it's not working. And
subsequent tests
Hi,
where can I get FreeBSD 4.1 as ISO image? I know it is *not* the latest
version but I need it to test something.
Thanks and bye,
Werner
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
I have 2 machines in a test environment, the carp0 interface on the
machines will not become master. The config is as follows:
test1# ifconfig
em0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500
options=bRXCSUM,TXCSUM,VLAN_MTU
inet 192.168.1.252 netmask
Pardon my newness, but what is top posting?
Thanks,
Bryan
On Friday 01 July 2005 06:56 pm, Lane wrote:
On Friday 01 July 2005 13:30, Robert Marella wrote:
Jerry McAllister wrote:
I say burn 'em on the cross. Why do you need to test to see if you can
post before you actually post a
In the last episode (Jul 01), Werner Schalk said:
where can I get FreeBSD 4.1 as ISO image? I know it is *not* the latest
version but I need it to test something.
http://mirrorlist.freebsd.org is a good place to start. It doesn't
list any ISO's, but there are two sites you can do a network
that was a joke btw, lets not get into that too. anyways
You could always add an addendum to the SMTP rfc that states when
someone sends a blank message with the subject test it will send
back the message with OK in the body.
___
I was under the impression that the only patches being back ported
in 5.4-RELEASE are from the security team to fix security related
issues. Do patches that resolve problems that are known to cause panics
get back ported as well?
Thanks for the reply,
Matthew Grooms
Nikolas Britton
On Wed, 29 Jun 2005, Francisco Reyes wrote:
For the archives.
Problem was crontab failing.
first thing I noticed was
postfix/sendmail[36590]: fatal:
No recipient addresses found in message
header
In /var/log/maillog
Then someone suggested to look at /var/log/cron
There I saw errors like
On Thu, Jun 30, 2005 at 04:34:13PM -0500, Dan Nelson wrote:
In the last episode (Jun 30), Mark Bucciarelli said:
I don't see the big win in hardware raid.
The three big plusses for hardware raid are: if you get one with
battery-backed cache (strongly recommended), then the array can cache
Woops, I wiped out lastlog.
How do I regenerate it?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Rodolphe Conan wrote:
I have followed the FreeBSD handbook procedure to install Matlab 7.0.
There are apparently big changes between 6.5 and 7.
I have used Matlab of FreeBSD since version 5 and it is the first time I
can't run a new matlab version on FreeBSD.
Rod
On Fri, 2005-07-01 at 09:32
On 7/1/05, Matthew Grooms [EMAIL PROTECTED] wrote:
I was under the impression that the only patches being back ported
in 5.4-RELEASE are from the security team to fix security related
issues. Do patches that resolve problems that are known to cause panics
get back ported as well?
Yes
touch /var/log/lastlog
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Matt
Juszczak
Sent: Friday, July 01, 2005 3:31 PM
To: freebsd-questions@freebsd.org
Subject: Re-generate lastlog
Woops, I wiped out lastlog.
How do I regenerate it?
Hello,
I'm trying to use the automounter to mount a USB thumbdrive on
-STABLE. The only problem I'm having is that, between reboots, the
name of the device changes between da0s1 and da1s1.
Is there a way to lock down the device name so it doesn't change?
--
Regards,
Doug
Hello,
I'm trying to use the automounter on an internal IDE Zip drive on
5-STABLE. The problem I'm having is the device /dev/afd0s1 is not
automatically created. The device /dev/afd0 is there, but not the
slice.
Is there a way to force that device name to be created on reboot?
--
Regards,
On Jul 1, 2005, at 11:29 AM, fbsd_user wrote:
So just because this guy was considerate and said 'test' in his
subject he gets criticized. But all the posts to this list for
selling drugs we all just ignore with no comments. And what good is
posting to the 'test' list when the sole purpose of a
--On Friday, July 01, 2005 13:56:00 -0400 Eric Ekong [EMAIL PROTECTED]
wrote:
Initially the second monitor wasn't coming up at all. Now, with a
minor change or two, I have the second monitor coming up, but it seems
to bring up a second window manager that I have no access to..., the
second
As far as I know there is no freebsd driver for the P-Series
of the Matrox card P650, P750, and Parhelia. Everything I could
find points to using the downloadable driver. The matrox driver for
these cards is mtx as opposed tot he mga/mga_hal/mgadrm.
Mind sharing your xorg.conf just so I can
As far as I know there is no freebsd driver for the P-Series
of the Matrox card P650, P750, and Parhelia. Everything I could
find points to using the downloadable driver. The matrox driver for
these cards is mtx as opposed tot he mga/mga_hal/mgadrm.
Mind sharing your xorg.conf just so I can
On 2005-07-01 14:09, Nikolas Britton [EMAIL PROTECTED] wrote:
that was a joke btw, lets not get into that too. anyways
You could always add an addendum to the SMTP rfc that states when
someone sends a blank message with the subject test it will send
back the message with OK in the body.
I'd
On 2005-07-01 14:03, [EMAIL PROTECTED] wrote:
Hi all,
How can I do to make 'ps' to show the entire command of some
process the is showed in [command].
In the 4.x boxes I was able to see complete command line, now in
5.4 it?s shown in backets.
Err, you don't I think.
Processes
I read through your kernel - very nice comments, thanks a lot!
I compiled the kernel and boot-up is noticably faster, thanks again!
I would like to investigate transfering all the device info from boot -v to
LATITUDE_C600.hints. I don't really know what most of the info from boot -v
means, I'd
--On Friday, July 01, 2005 17:34:53 -0400 Eric Ekong [EMAIL PROTECTED]
wrote:
As far as I know there is no freebsd driver for the P-Series
of the Matrox card P650, P750, and Parhelia. Everything I could
find points to using the downloadable driver. The matrox driver for
these cards is mtx as
On 7/1/05, Bart Silverstrim [EMAIL PROTECTED] wrote:
[deleted]
While proposing ways to stop people from sending test messages to
lists, can someone find a way to filter out top posting as well? :-)
I'm not trying to stop anybody. I'm purposing ping for SMTP, The
construct is like an echo
In the last episode (Jul 01), Doug Poland said:
Hello,
I'm trying to use the automounter to mount a USB thumbdrive on
-STABLE. The only problem I'm having is that, between reboots, the
name of the device changes between da0s1 and da1s1.
Is there a way to lock down the device name so it
Hi all,
Well, after removing IPF and having a week of stability, we decided to put
our mail server to the test.
I began flooding it with tons of mail messages using smtp-source at about
2 pm today. The server load jumped up to about 4.50 average. It
eventually started denying requests,
Here is my working config, before I upgraded to the parhelia...
attached...
Eric
* Benjamin Thelen [EMAIL PROTECTED] [050630 09:48]:
Hi List,
I really would appreciate your help, because I ran out of ideas!
Basically dual-head works, but only with a little workaround:
If I start X,
On Jul 1, 2005, at 6:02 PM, Nikolas Britton wrote:
On 7/1/05, Bart Silverstrim [EMAIL PROTECTED] wrote:
[deleted]
While proposing ways to stop people from sending test messages to
lists, can someone find a way to filter out top posting as well? :-)
I'm not trying to stop anybody. I'm
On Sun, 19 Jun 2005, [ISO-8859-1] Björn König wrote:
Dan Mahoney, System Admin wrote:
Is freeBSD ever going to update the contributed version of openssh to
something more recent?
Yes. Currently OpenSSH 4.1p1 is part of 6-CURRENT developent branch. An
update in 5-STABLE may happen, but not
On 7/1/05, Bryan Maynard [EMAIL PROTECTED] wrote:
I read through your kernel - very nice comments, thanks a lot!
I compiled the kernel and boot-up is noticably faster, thanks again!
I would like to investigate transfering all the device info from boot -v to
LATITUDE_C600.hints. I don't
On Friday 1 July 2005 07:32, Josh Ockert wrote:
On 6/30/05, Danny Pansters [EMAIL PROTECTED] wrote:
Sorry for top posting...
The crucial words are: under the terms of this License. The confusion
is due to contradictions in the License. Which are theirs. And it's very
disputed as in
Werner Schalk wrote:
Hi,
where can I get FreeBSD 4.1 as ISO image? I know it is *not* the latest
version but I need it to test something.
There you'll find all releases and some iso images in the ISO-IMAGES
subdirectory:
ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/
Hi,
I'm installing FreeBSD for the first time (version 5.4), although I've
been a Linux user for some years. The machine is an old laptop,
Toshiba Satellite 2805.
I followed the instructions in section 7.2.1 of the handbook, and
found out the needed kernel module is snd_ds1, and modified
Attention: [EMAIL PROTECTED]
A virus was found in an Email message you sent.
This Email scanner intercepted it and stopped the entire message
reaching its destination.
The virus was reported to be:
Worm.SomeFool.P
Please update your virus scanner or contact your IT support
personnel as
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
(Apologies for the long post, but I'm including a lot of information since
the problem appears obscure -- to me anyway).
I've just acquired a new computer (specs shown below) on which I've
installed FreeBSD 5.4-RELEASE. I'm running Xorg 6.8.2 as
Hi!
I have Intel server board SE7520bd2 with integrated
SATA RAID controller on it and two hard drives that
are already configured as RAID 1 (mirror) via BIOS.
When I trying to install FreeBSD 5.4 it doesn't see my
RAID 1, but sees two individual disks. What can I do?
Does it mean that FreeBSD
Your going to have to rebuild your system with the Nvidia
written driver, see here:
http://www.nvidia.com/object/freebsd_1.0-7667.html
and see if it works. Read the readme file with this
driver carefully first, then dig around the Internet, there
are a few people who have posted notes on
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 1 Jul 2005 at 21:20 (-0700), Ted Mittelstaedt wrote:
Your going to have to rebuild your system with the Nvidia written
driver, see here:
http://www.nvidia.com/object/freebsd_1.0-7667.html
and see if it works. Read the readme file with
94 matches
Mail list logo
