Good morning,
on Wed, Aug 03, 2005 at 08:41:53PM -0500, Denny White wrote:
I had read where I needed to edit sendmail.mc but couldn't find
it. Then read the equivalent mc file for freebsd I needed to edit
was /etc/mail/freebsd.mc to which I added:
INPUT_MAIL_FILTER(
On Wed, Aug 03, 2005 at 05:06:37PM -0500, [EMAIL PROTECTED] wrote:
I would appreciate any suggestions for a reasonably secure solution. I
just found all this out and am totally blank.
Have a look at OpenVPN (http://www.openvpn.org/), it is available as a
FreeBSD port and it comes with a
Today Martin Welk had this to say:
Good morning,
on Wed, Aug 03, 2005 at 08:41:53PM -0500, Denny White wrote:
I had read where I needed to edit sendmail.mc but couldn't find
it. Then read the equivalent mc file for freebsd I needed to edit
was /etc/mail/freebsd.mc to which I added:
On Thu, 04 Aug 2005 09:13:18 +0800, Graham North [EMAIL PROTECTED] wrote:
I just set up my FreeBSD box to act as a printserver. I used CUPs and
Samba following great directions found here:
http://www.ajl-tech.com/index2.php?option=contentdo_pdf=1id=16
The printserver works very nicely
On Thu, 04 Aug 2005 09:38:15 +0800, Michael Beattie [EMAIL PROTECTED]
wrote:
On 8/3/05, Wouter van Rooij [EMAIL PROTECTED] wrote:
\
Hello,
At the first place, sorry for my bad English.
My question is:
How can you, when you're writing a perl program, make a input
(stdin) hidden, so that
hi,
this 11k lines of fortran compile and run under Linux,
on FreeBSD 5.4, compiling with f77 produces a binary, apparently without
errors, but
executing it, inmediately gives 'Abort', ldd gives signal 6
ktrace is not very helpful :-)
36372 ktrace RET ktrace 0
36372 ktrace
mdff wrote:
i'm trying to create packages on freebsd-5.4-RELEASE.
can anyone tell me how to define a packinglist for
pkg_create with the ability to remove the directories
after pkg_delete and not getting complaints if they are
not empty?
if i specify @dirrm dir in the packinglist, i get
Hello,
I would like to try a separate /boot slice as permitted by FreeBSD 5.x...
(http://www.khmere.com/freebsd_book/html/ch08.html)
But alas it does not appear to be as simple as simply specifying a
/boot during setup. This causes the bootloader to complain about not
finding a kernel given
[Re: freebsd-questions Digest, Vol 106, Issue 8]
System : 5.4-REL-#6
I've installed cups (via ports) and downloaded the .ppd file from
linuxprinting.org so I could use it in the kde-printer wizard. No problem so
far. I can see and modify the settings also via localhost:631. When
hello, all.
I wan't make a http mirror for the FreeBSD.Can I only mirror
the i386 arch?and when I mirror finished how to join the mirorr site
database?
--
hmy
http://rods.vmmatrix.net
___
freebsd-questions@freebsd.org
[EMAIL PROTECTED] wrote:
On Aug 3, 2005, at 11:27 PM, David Banning wrote:
I am running apache 1.3 with php and I find when that for each person
who visits the site, an additional 29 meg is consumed of my measly
512M. Searching around, it seems like this is relatively normal.
So here is
Hello,
I am fairly new to FreeBSD having only used it for about a month. I am
using FreeBSD 5.4 release.
I have recently got round to setting up amd. I followed the instructions
to do this on a website I found -
http://renaud.waldura.com/doc/freebsd/automounting.txt
After following the
On Thu, Aug 04, 2005 at 11:00:46AM +0300, Danny Braniss wrote:
this 11k lines of fortran compile and run under Linux,
on FreeBSD 5.4, compiling with f77 produces a binary, apparently without
errors, but
executing it, inmediately gives 'Abort', ldd gives signal 6
ktrace is not
On 8/3/05, hal [EMAIL PROTECTED] wrote:
Can anyone recommend a sound card for the PCIX bus?
You will not be able to find a sound card that's PCI-X. A 16-bit /
44KHz PCM audio stream is something like 1MB/s and the 32-bit / 33MHz
PCI bus can support 133MB/s. I don't think their will ever be a
I have recently installed a big disk (1.4 TB sata raid with scsi
interface) on an i386 computer running FreeBSD 5.4-RELEASE-p1. I have 3
partitions on the FreeBSD slice. The disk is working OK, but the disklabel
seem a little strange. For one of the partitions the fsize bsize bps/cpg
values are 0
Hello,
I finisched my online shop in the last days. So want to ask, if i could
register my shop as an online retailer of FreeBSD. If yes, which information do
you require? Thank you.
carl
___
freebsd-questions@freebsd.org mailing list
On 8/3/05, Subhro [EMAIL PROTECTED] wrote:
Hello Folks,
One of my clients had asked me to provide a router. I was planning to
use an old P1 boxs to make the router. The requirements state that it is
for the purpose of internet – vlan communication. The router must have
features like
On Thu, Aug 04, 2005 at 11:00:46AM +0300, Danny Braniss wrote:
this 11k lines of fortran compile and run under Linux,
on FreeBSD 5.4, compiling with f77 produces a binary, apparently without
errors, but
executing it, inmediately gives 'Abort', ldd gives signal 6
ktrace is not
Quoting Martin Welk [EMAIL PROTECTED]:
On Wed, Aug 03, 2005 at 05:06:37PM -0500, [EMAIL PROTECTED] wrote:
I would appreciate any suggestions for a reasonably secure solution. I
just found all this out and am totally blank.
Have a look at OpenVPN (http://www.openvpn.org/), it is available
It worked! after changing BIOS setting for CDdrive from DMA to PIO.
Greetings!
Mihai Peşte
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 8/4/05, user local [EMAIL PROTECTED] wrote:
It worked! after changing BIOS setting for CDdrive from DMA to PIO.
Greetings!
Mihai Peşte
but why?...
___
freebsd-questions@freebsd.org mailing list
Ahoy. I've had this old ATI Rage II video card for
months and haven't been able to get the tv-out on it
to work. I have found no documentation on the internet
and only two or three examples of xorg.conf files,
none of which have worked. I'm turning to you guys.
Let me show you what I currently
huang mingyou wrote:
I wan't make a http mirror for the FreeBSD.Can I only mirror
the i386 arch?and when I mirror finished how to join the mirorr site
database?
While you can mirror only the pieces you want, an official mirror needs to
mirror complete chunks of stuff. See the fine
On Thu, Aug 04, 2005 at 04:54:14AM -0500, Nikolas Britton wrote:
Heres a question for others to answer. How would you setup a sound
alert if for example one of the drives in a RAID 1 failed? This would
be for an ata-mkIII PseudoRAID mirror setup.
And what about email or phone call alert?
Greetings,
I downloaded the 5.4-release iso images from the freebsd website.
I used my windows machine and Nero to burn the iso images to
cd's.
I have an old machine that I am trying to install 5.4-release on.
It is a PII 333, SCSI with 30GB scsi hard drive.
I place cd 1 in the drive (disk 1
David LeCount [EMAIL PROTECTED] writes:
--- Lowell Gilbert
[EMAIL PROTECTED] wrote:
On my system, that file belongs to sdocbook-xml
itself.
I don't actually know much about xmlcatmgr.
Maybe you should ask the maintainer of the
sdocbook-xml port?
I would bet that the file was
Please don't top-post.
Joe Hamelin [EMAIL PROTECTED] writes:
Correct. The boot selection screen locks and gets jumbled when
booting from the
5.4-RELEASE-i386-disc1.iso disk.
What happens when you boot from floppies?
___
John Larson [EMAIL PROTECTED] writes:
I have a peer to peer network and when I send a form
to the server this is the maillog. I have set up
var/mail/user in main.cf. how do i retrieve the mail.
I hope to use freebsd mail program but I don't know
how to configure it. this system is not
On Thursday 04 August 2005 02:33 pm, Darryl Hoar wrote:
Greetings,
I downloaded the 5.4-release iso images from the freebsd website.
I used my windows machine and Nero to burn the iso images to
cd's.
I have an old machine that I am trying to install 5.4-release on.
It is a PII 333, SCSI with 30GB
I finally got this issue resolved. I ran the exact
xmlcatmgr command it failed on, except I replaced add
with remove. That removed the entry from the database
that it was complaining about. Unfortunately I
destroyed another database figuring it out, but I'm
just going to have to recompile
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bryan Maynard
Sent: Thursday, August 04, 2005 4:39 AM
To: freebsd-questions@freebsd.org
Subject: Re: 5.4-release install problem
On Thursday 04 August 2005 02:33 pm, Darryl Hoar wrote:
Greetings,
I
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Darryl Hoar
Sent: Thursday, August 04, 2005 10:14 AM
To: freebsd-questions@freebsd.org
Subject: RE: 5.4-release install problem
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
--- David LeCount [EMAIL PROTECTED] escribió:
Ahoy. I've had this old ATI Rage II video card for
months and haven't been able to get the tv-out on it
to work. I have found no documentation on the
internet
and only two or three examples of xorg.conf files,
none of which have worked. I'm
I am attempting to install FreeBSD5.4 on a Dell Poweredge 1850
via the serial console. I went through the documentation again and
found the following on the FreeBSD 5.4 documentation in installation-i386.txt
FreeBSD/i386 5.4-RELEASE Installation Instructions
-- snip --
Hi Daniel:
As indicated, I have tried to create links that will redirect to the new
lpr placed in /usr/local/bin
I did not redirect anything to /usr/local/sbin. My changes were:
mv /usr/bin/lp /usr/bin/lp.bak
mv /usr/bin/lpr /usr/bin/lpr.bak
ln -s /usr/local/bin/lp /usr/bin/lp
ln -s
Does anyone know where I can find a good Tripwire policy file for 5.4?
I installed tripwire-2.3.1.2_3 from ports, but the default policy file
throws a lot of errors. I think it's tailored to 4.x.
Thanks,
Bret
smime.p7s
Description: S/MIME Cryptographic Signature
Hi, all:
Configuration:
(all addresses fake, 1.1.1.x - from ISP1, 2.2.2 - from ISP2)
# grep ifconfig /etc/rc.conf
ifconfig_xl0=inet 1.1.1.254 netmask 255.255.255.128
ifconfig_xl0_alias0=inet 2.2.2.2 netmask 255.255.255.128
ifconfig_xl1=inet 192.168.255.1 netmask 255.255.255.255
ifconfig_vlan0=inet
I'm working on a shell script to use p0f to identify unauthorized hosts
on our network.
In the script I use an echo command to see what the output of the command
is. This is what it looks like:
/usr/local/bin/p0f -i xl0 -N -l -o /root/capture.1123177152.log 'src net
10.0.0.0/8 or src net
hello!
Im having trouble installing my coustom kernel, config and make doesnt say
anything... :(
help me plz :)
//alex
-bash-2.05b# uname -a
FreeBSD dracula.xxx.net 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Wed Apr 27 14:23:02
CEST 2005 [EMAIL PROTECTED]
.net:/usr/src/sys/i386/compile/DRACULA
ehh i forgot to send my conf file with the last file, so here it is :)
thnx in advance
DRACULA.conf
Description: Binary data
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
[Deleted]
Well,
I went and tried to look at the scrolling text. It had several
columsn with in err ef1 cip. Their is a line that says:
BTX Halted.
ss:esp=
I'm pretty sure this is not the normal boot process. I'll look at the
handbook as suggested.
-Darryl
I found this when I Googled BTX
I know this isn't directly freebsd related, but this list has been good
to me before.
I am running 5-STABLE. I installed Apache 2.1.4 using make install clean
after updating my ports collection. Everything seemed to go fine. I
then installed mod_php5 via make install clean. I added
On Thursday 04 August 2005 10:57, you wrote:
[Re: freebsd-questions Digest, Vol 106, Issue 8]
System : 5.4-REL-#6
I've installed cups (via ports) and downloaded the .ppd file from
linuxprinting.org so I could use it in the kde-printer wizard. No
problem so far. I can see and
You might first try making a generic kernel with no
customization and see if that works. If it does, you might be
accidentally leaving out support for something vital like disk drives
or something else equally vital causing the kernel to not get along
far enough to produce error messages.
On Thu, Aug 04, 2005 at 08:09:46PM +0200, BBB wrote:
hello!
Im having trouble installing my coustom kernel, config and make doesnt say
anything... :(
help me plz :)
//alex
-bash-2.05b# uname -a
FreeBSD dracula.xxx.net 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Wed Apr 27
14:23:02 CEST
i think so, i used sysinstall, i will try again though
- Original Message -
From: Derrick MacPherson [EMAIL PROTECTED]
To: BBB [EMAIL PROTECTED]
Sent: Thursday, August 04, 2005 8:19 PM
Subject: Re: installing kernel fails, make is ok
do you have all the source installed correctly?
On 08/04/05 10:26 AM, Bryan Maynard sat at the `puter and typed:
I know this isn't directly freebsd related, but this list has been good
to me before.
I know exactly what you mean . . .
I am running 5-STABLE. I installed Apache 2.1.4 using make install clean
after updating my ports
To: freebsd-questions@freebsd.org
Subject: Re: 5.4-release install problem
[Deleted]
Well,
I went and tried to look at the scrolling text. It had several
columsn with in err ef1 cip. Their is a line that says:
BTX Halted.
ss:esp=
I'm pretty sure this is not the normal boot process. I'll
Hello,
yesterday I have been given task to upgrade one of my servers to
actual versions of Apache2 and PHP4. All went fine.. just for few
sites using YATS php-based template system (available at
http://yats.sourceforge.net/). There is no such extension in ports and
I am unable to build
Bryan Maynard wrote:
I know this isn't directly freebsd related, but this list has been good
to me before.
I am running 5-STABLE. I installed Apache 2.1.4 using make install clean
after updating my ports collection. Everything seemed to go fine. I
then installed mod_php5 via make install
On 8/4/05, hal [EMAIL PROTECTED] wrote:
On Aug 4, 2005, at 3:54 AM, Nikolas Britton wrote:
On 8/3/05, hal [EMAIL PROTECTED] wrote:
Can anyone recommend a sound card for the PCIX bus?
You will not be able to find a sound card that's PCI-X. A 16-bit /
44KHz PCM audio stream is
First question is about the non-routable / reserved address spaces.
Are _ALL_ of them needed or just the four mentioned in the pf manual?
# Block all inbound traffic from non-routable or reserved address spaces
# RFC 1918 private IP
block in quick on rl0 from 192.168.0.0/16 to any
block in quick
I have a 4.10 machine thats our internal mailserver. we use NIS for the
accounts, we add a couple local accounts just in case NIS can't be
contacted... We had our software developers make a change to all users
PATH, part of which points to a different version of the su command,
which we've since
On Thursday 04 August 2005 09:49, Michael Dexter wrote:
Hello,
I would like to try a separate /boot slice as permitted by FreeBSD 5.x...
(http://www.khmere.com/freebsd_book/html/ch08.html)
But alas it does not appear to be as simple as simply specifying a
/boot during setup. This causes
--On Thursday, August 04, 2005 12:46:20 -0500 Paul Schmehl
[EMAIL PROTECTED] wrote:
I'm working on a shell script to use p0f to identify unauthorized hosts
on our network.
In the script I use an echo command to see what the output of the command
is. This is what it looks like:
All my incoming mail goes to a unix box which
I access over the internet using kmail.
I also occasionally get at it using pine.
Here is my problem: after I use pine
kmail will no longer recognize the presence
of any message that was there when pine
looked at them. How do i reset the message
the line in main.cf where to deliver the mail is
/var/mail/user. there were two choices
do I have to put in /var/mail/${USERNAME} in the
main.cf configuration file instead.
thanks for your idea
John Larson
South Lake Tahoe CA.
__
Do You Yahoo!?
Update - problem partially solved.
I believe that a typo in smb.conf caused the grief, HOWEVER the
formatting of text files from lp kind of sucks. Printing is hard
against the Left Hand Side of page and loses about 2 characters.
I looked and did not seem to have a2ps installed therefore
I would like to try a separate /boot slice as permitted by FreeBSD 5.x...
Search the list. This comes up about once a month, and I've yet to see anyone
succeed.
Aside from it's the way Linux does it, do you have any good reason for
wanting this?
All of my questions seem to generate that
A Dell PowerEdge1850 will, in fact take a FreeBSD4.11
installation. This problem has been solved.
It turns out that Dell Computers only supports a particular
version of Redhat at this time. They put a special partition on the
drives shipped with PowerEdge 1850's that is about 50
Leonard Zettel wrote:
All my incoming mail goes to a unix box which
I access over the internet using kmail.
I also occasionally get at it using pine.
Here is my problem: after I use pine
kmail will no longer recognize the presence
of any message that was there when pine
looked at them. How do
On Thursday 04 August 2005 22:27, Leonard Zettel wrote:
All my incoming mail goes to a unix box which
I access over the internet using kmail.
I also occasionally get at it using pine.
Here is my problem: after I use pine
kmail will no longer recognize the presence
of any message that was
I have recently installed FreeBSD 5.4-RELEASE i386 on a box that uses a
Supermicro P8SCT motherboard containing two Broadcom 5721 Gigabit Ethernet
controllers.
These are working fine and are recognized on boot, but when I tried to
configure pf to utilize ALTQ I received the following message:
On Thursday 04 August 2005 23:32, RW wrote:
If you can't resist the urge to use mutt then
there is a way turn it off in pine, but I can't remember how offhand.
I just remembered.
Go to the pine config screen (M S C), and read the help for the option
disable-these-drivers
My home network is currently setup with a lowend router from my phone
company. Its not very good and i have my only phone service through
it using VOIP. I've managed to get the rest of my network (3
computers) behind the freebsd machine (computer 4). The problem is
that i'd like to move
At 12:56 AM +0300 8/5/05, Michael Dexter wrote:
I would like to try a separate /boot slice as permitted
by FreeBSD 5.x...
I missed the beginning of this thread. Where did you get the
impression that FreeBSD will work if you create /boot as a
separate partition?
Search the list. This comes
Is there no one else, who can help me out, from this bge0: WatchDog
Time Out -- resetting .
I m using FreeBSD 5.3, on Dell Power Edge 6650 Quad Processor Machine,
my system get stuck while i m accessing it through ssh. well after
some time , when i acces the machine check ,
Hello all,
OK it is now day three and I have given up. This will be a long one just to
warn you now.
I have a 320 GiB HD and a 5 GiB HD. The 320 is faster than the 5 (yes, it is
that old). I want to dual boot WinXP and FreeBSD. The main issue is that I
don't want to put the FreeBSD buried
On Fri, 05 Aug 2005 10:44:30 +0800, [EMAIL PROTECTED] wrote:
Hello all,
OK it is now day three and I have given up. This will be a long one just
to warn you now.
I have a 320 GiB HD and a 5 GiB HD. The 320 is faster than the 5 (yes,
it is that old). I want to dual boot WinXP and FreeBSD.
Michael Dexter [EMAIL PROTECTED] writes:
I would like to try a separate /boot slice as permitted by FreeBSD 5.x...
I forget where you got that from.
Anyway, the boot(8) manpage makes it pretty clear that your /boot must
be on the a of whatever s you're booting, but I'm not as sure as
others
the line in main.cf where to deliver the mail is
/var/mail/user. there were two choices
do I have to put in /var/mail/${USERNAME} in the
main.cf configuration file instead.
your configuration looks fine. to retrieve the mail, type `mail` while
logged in as larson. your mail should be there.
are you getting the error on both gigabit cards?
i know there is known interupt issues with this SMP setup, and someone i
know who was complaining had bge's. he ended up rolling back to fxp, but
this was in the 4.x days.
do a vmstat -i and see if they are listed with their specific irqs
On Wednesday, 3 August 2005 at 14:51:06 +0200, cpghost wrote:
On Tue, Aug 02, 2005 at 10:22:19AM +0930, Greg 'groggy' Lehey wrote:
of coasters, and it might help identify the issues. All my burn
failures (about 40% of total!) have been with DVD+Rs, though
admittedly a cheap no-name brand
73 matches
Mail list logo