On Thu, Jan 05, 2006 at 09:18:34PM +0100, Frank Staals wrote:
Leonidas Tsampros wrote:
On Thu, Jan 05, 2006 at 04:05:23PM +0100, Frank Staals wrote:
Leonidas Tsampros wrote:
On Thu, Jan 05, 2006 at 01:46:40PM +0100, Frank Staals wrote:
Hey,
I have an Acer
Crispy Beef wrote:
When the install CD boots, you normally get presented with a menu
(same on an installed FreeBSD system) which allows you to choose to
boot the system with; 1) ACPI Disabled 2) ACPI Enabled...a safe mode
etc. etc. If you are not getting to that then it sound like you
Date: Fri, 6 Jan 2006 01:25:45 +
From: Kep Woof [EMAIL PROTECTED]
Subject: palm tungsten t3 (m550) on freebsd 6 over usb
To: [EMAIL PROTECTED]
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain; charset=ISO-8859-1
hiya,
i've been trying unsucessfully to get my palm t3 to work
Nick Pavlica wrote:
All,
I have just set up a FBSD6.0 server configured with gmirror/raid1
using two SATA drives ad4 ad6 according to these instructions:
http://www.onlamp.com/pub/a/bsd/2005/11/10/FreeBSD_Basics.html
Everything is functioning properly with the
On Thu, 5 Jan 2006 20:54:04 +0100
Kiffin Gish [EMAIL PROTECTED] wrote:
/usr/bin/gtk-query-immodules-2.0-32: error while loading shared
libraries: libXinerama.so.1: cannot open shared object file: No such
file or directory *** Error code 127
Stop in /usr/ports/x11-toolkits/linux-gtk2.
With all my USB pens I invariably use:
/sbin/mount_msdosfs /dev/da0s1 /mnt
And it works.
Vittorio
Alle 06:09, venerdì 06 gennaio 2006, Teilhard Knight ha scritto:
On 2006-01-05 15:28, Teilhard Knight [EMAIL PROTECTED] wrote:
Can someone tell me, or point to me where I can find, how to
I have been doing a lot of key work over the last couple of days What I
am doing is:
dmesg | grep da0
To find the drive that is listed on as it might not be da0 if you have
other things plugged in.
Then:
mount -t msdosfs /dev/da0s1 /mnt
Does the same thing but I think ends up being a little
What's the easiest way to clear out all of the /compat/linux stuff and start
all over again?
--
Kiffin Rex Gish
Gouda, The Netherlands
-Original Message-
From: Adi Pircalabu [mailto:[EMAIL PROTECTED]
Sent: Friday, January 06, 2006 10:42
To: Kiffin Gish
Cc:
On Fri, 6 Jan 2006 11:44:09 +0100
Kiffin Gish [EMAIL PROTECTED] wrote:
/usr/bin/gtk-query-immodules-2.0-32: error while loading shared
libraries: libXinerama.so.1: cannot open shared object
file: No such
file or directory *** Error code 127
Stop in
With all my USB pens I invariably use:
/sbin/mount_msdosfs /dev/da0s1 /mnt
And it works.
Thank you. It worked for me too.
Teilhard.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
I have been doing a lot of key work over the last couple of days What I am
doing is:
dmesg | grep da0
To find the drive that is listed on as it might not be da0 if you have
other things plugged in.
Then:
mount -t msdosfs /dev/da0s1 /mnt
Does the same thing but I think ends up being a little
Jean-Baptiste Potonnier wrote:
Ok, I think so,
but it seems I can't load anything!
Try typing 'autoload' and then hitting return to see what that does,
it should start to load a kernel.
Tried this yesterday an get a message such cannot find kernel
Get the meny by typing beastie-start=
Hi,
Please don't remote the list from the recipients of the message, unless
the reply contains confidential material that you don't wish to disclose
to all the subscribers of the list. By keeping the list, you ensure
that other subscribers may reply too in case I'm wrong about something,
and you
The message Returned mail: Data format error from Mail Delivery Subsystem,
sent on 1/6/2006 14:45 was quarantined because it contained either an
executable file, a batch file or a screen saver file. All of these types of
attachments are considered security risks. Please consult your mail
Hello,
I would like to write a script to monitor my internet connection status.
My home connection goes down fairly often and I would like to get an idea
for just how often it goes down and if possible how long it goes down for.
Could someone help me write a script that will check my connection
On 2006-01-06 00:17, Jacob S [EMAIL PROTECTED] wrote:
Hello list,
I'm having a problem setting up ipf on a FreeBSD server and can't
figure out where I'm going wrong. I copied my ipf.rules file from
another server I have where ipf is working great. But after I
customized the rules to this
I'm writing a program that needs to write a file and I'd like to have it
ask for the root password and run as root, like many of the system config
applications do. Do I have to write something special, or is there some
way to tell KDE (or GNOME) to prompt for the root password? Is this what
a
Gary Kline wrote:
People,
You may remember that I'm trying to scan 400 pages from a text.
Things work much better using he latest gocr and a greatly
enlarged JPEG image, tweaked with xv. I'm almmost to the point
where I can use aspell -c to correct
Hello freebsd-questions,
I have 3 domains, e.g. dom1.spb.ru, dom2.spb.ru, dom3.spb.ru
and 1 external (inet) IP.
How i can setup this?
As database i use LDAP..
--
Best regards,
Playnet mailto:[EMAIL PROTECTED]
___
Hi,
Have recently set-up hald, dbus and gnome-volume-manager on my Linux box so
that devices are automounted in fstab etc. Works great! Have had a look to
see if I can have this running with Gnome on my 6.0-RELEASE laptop, found dbus
in ports, but hald and gnome-volume-manager are nowhere
I have Asterisk 1.0.8-BRIstuffed-0.2.0-RC8h running on 5.4-p6 without
any problems.
Regards,
Andrew
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Richard
Klingler
Sent: Wednesday, January 04, 2006 08:09
To: freebsd-questions@freebsd.org
Subject:
if I comment out the ipv6net statement in the kernel source and recompile,
how do I tell ipfilter and the ports not to include ipv6 support?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Webster, Andrew wrote:
I have Asterisk 1.0.8-BRIstuffed-0.2.0-RC8h running on 5.4-p6 without
any problems.
Well..I already switched to a Gentoo Linux-2.16.x box..
runs prefectly even with spandsp fax reception...
best regards
rick
___
Hello,
I'm configuring nfsd on my freebsd box, and trying to mount from my
linux box. I keep getting permission denied on the linux side, and I'm
not sure why.
My local network is 192.168.1.0/24.
I've added this to /etc/exports.
/usr/local/www -network 192.168.1.0 -mask 255.255.255.0
My
Michael,
If /usr/local/www is not a mount point, this will not work. You need to
put the mount point (eg: /usr) in /etc/exports, and add the option
-alldirs to allow it to mount a subdirectory of the mount point.
Andrew
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Michael P. Soulier (msoulier) writes:
Hello,
I'm configuring nfsd on my freebsd box, and trying to mount from my
linux box. I keep getting permission denied on the linux side, and I'm
not sure why.
My local network is 192.168.1.0/24.
I've added this to /etc/exports.
/usr/local/www
Hi all
I've some big problem to install FreeBSD (actually 6.0) on my two new HP
DL145G2 with two AMD Opteron 248.
When I boot the cd the system waiting very long time after
Waiting 5 sec to scsi settle (or something like that)
I have many message mpt0 time out (I've SCSI Disk)
After that I can
Hello Everyone,
I'm running FreeBSD 5.4-STABLE on a remotely hosted server and I'd like to find
out the DDR speed
of the RAM chips installed so I can order the proper ones for an upgrade. I
know it's either
DDR333 or DDR400 so I assume I can just order DDR400 to be safe but..
There's plenty of
--- JD Arnold [EMAIL PROTECTED] wrote:
I'm writing a program that needs to write a file and I'd like to have it
ask for the root password and run as root, like many of the system
config
applications do. Do I have to write something special, or is there some
way to tell KDE (or GNOME) to
--- Chuck Robey [EMAIL PROTECTED] wrote:
lars wrote:
Martin Cracauer wrote:
Sean wrote on Mon, Jan 02, 2006 at
04:09:27PM -0500:
Looking for recommendations on any Unix
programming books.
I have been out of things for a while so I
would put my skill level
back to the
On 1/6/06, Michael Landin Hostbaek [EMAIL PROTECTED] wrote:
Look alright.
After adding the line to /etc/exports - mountd(8) needs to re-read the
file. So do:
# kill -s HUP `cat /var/run/mountd.pid`
You can also use 'showmount -e' to see the configured exports list.
Hmm. I restarted nfsd,
On 1/6/06, Webster, Andrew [EMAIL PROTECTED] wrote:
Michael,
If /usr/local/www is not a mount point, this will not work. You need to
put the mount point (eg: /usr) in /etc/exports, and add the option
-alldirs to allow it to mount a subdirectory of the mount point.
It would appear that my
On 2006-01-06 08:25, Danial Thom [EMAIL PROTECTED] wrote:
Oddly, I think I wish this were not so ... I would say, everything
I've ever gotten that was free, turned out to be worth the price,
and I just would not want to devalue that man's tremendous
contribution, in any method whatsoever.
--- azri abdul majid [EMAIL PROTECTED] wrote:
That's what I am thinking about. As a linux
user for such a long time,
its quite dissappointed to say that linux has
become a monster.
Ah, but mp3s are nice and smooth!!! :-)
If you don't need any of the newer features, I'd
suggest FreeBSD 4.x
--- Holtor [EMAIL PROTECTED] wrote:
Hello Everyone,
I'm running FreeBSD 5.4-STABLE on a remotely
hosted server and I'd like to find out the DDR
speed
of the RAM chips installed so I can order the
proper ones for an upgrade. I know it's either
DDR333 or DDR400 so I assume I can just
BIOS screens and RAM chips are tough to see from a distance :)
The program memtest86+ http://www.memtest.org/ shows the information you
seek. Unfortunately, as far as I know, it must be run from a boot disk,
though since it is open source, it perhaps could be modified to run under
FreeBSD.
How to get the best results from FreeBSD questions.
===
Last update $Date: 2005/08/10 02:21:44 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
Crispy Beef wrote:
Hi,
Have recently set-up hald, dbus and gnome-volume-manager on my Linux box
so that devices are automounted in fstab etc. Works great! Have had a
look to see if I can have this running with Gnome on my 6.0-RELEASE
laptop, found dbus in ports, but hald and
Hi. I can't seem to find the way FreeBSD deals with stopping the running
rc.d services when shutting down/rebooting the machine. In Linux, for
example, the shutdown command first switches to runlevel 0, triggering
init to call the program for that event, which deals with shutting down
the
Why not just bring an assortment of RAM when you
visit, which you'll likely have to do to install
it. Its a lot cheaper than the alternatives.
--- Bruce MacDonald [EMAIL PROTECTED] wrote:
BIOS screens and RAM chips are tough to see
from a distance :)
The program memtest86+
Oops, there's this /etc/rc.shutdown thing, sorry to bother you.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 1/6/06, Albert Shih [EMAIL PROTECTED] wrote:
Hi all
I've some big problem to install FreeBSD (actually 6.0) on my two new HP
DL145G2 with two AMD Opteron 248.
When I boot the cd the system waiting very long time after
Waiting 5 sec to scsi settle (or something like that)
I have many
Hello freebsd-questions,
I have a trouble with samba.
In my testmachine i install samba as PDC and have some questions.
Test mashine not in inet.
In local net i have win2k, and try to go into domain. Offtopic says what
domain not found.
What i need? Local DNS?
Need i setup Kerberos?
rtfm what?
Imran Imtiaz wrote:
which is the best wireless ap detection and signal strength utility cause i
have installed bsd-aitool and used its utility dstumber which gives me the
following error error: unable to ioctl device socket: Operation now in progress
so is there any other utility for this??
Le 06/01/2006 à 21:44:34+0300, Andrew P. a écrit
On 1/6/06, Albert Shih [EMAIL PROTECTED] wrote:
Hi all
After that I can install (but I just see one disk and I've two disk). But
when I reboot the system don't see the disk is bootable.
Anyone have succefully install FreeBSD on DL145
Normally, I expect dhclient to run at startup and then
disappear into the background.
Today - in the process of diagnosing other troubles - I ran
into this from top:
last pid: 48344; load averages: 3.30, 2.85, 2.46up 0+19:50:53 14:17:04
127 processes: 3 running, 122
On 4 Jan 2006, at 18:59, eoghan wrote:
Hello
Im wondering if there is any info on getting oracle running on
freeBSD (im using 6.0). I have found this:
http://www.scc.nl/~marcel/howto-oracle.html
But it seems a little dated. I read oracle doesnt officially
support freeBSD and was pointed
On 6 Jan 2006, at 14:02, Playnet wrote:
Hello freebsd-questions,
I have 3 domains, e.g. dom1.spb.ru, dom2.spb.ru, dom3.spb.ru
and 1 external (inet) IP.
How i can setup this?
As database i use LDAP..
Read the exim specification available under the Documentation section
at exim.org and
On 6 Jan 2006, at 16:33, Michael P. Soulier wrote:
On 1/6/06, Webster, Andrew [EMAIL PROTECTED] wrote:
Michael,
If /usr/local/www is not a mount point, this will not work. You
need to
put the mount point (eg: /usr) in /etc/exports, and add the option
-alldirs to allow it to mount a
Hi there,
I had a 5.4 system running the openldap23 sasl server that I did a bin upgrade
to 6.0-stable. Once that was done I cvsup'd everything to bring it up to
date. When I did a portupgrade -a I noticed, due to portupgrade dying, that
openldap23-sasl-server does not exist in the ports
Hi all
I use feebsd 4.11 as router with intel Giga card about
1 year
Recently, the bandwidth couldn't grow and stop to
about 383M. ls it the maximum thoughtput of the
freebsd?
have you had any experience on it?
The router is running POLLING instead of interrupt
and I had experience in freebsd
Brian John wrote:
Hello, I would like to write a script to monitor my internet
connection status. My home connection goes down fairly often and I
would like to get an idea for just how often it goes down and if
possible how long it goes down for. Could someone help me write a
script that will
Sorry, I am russian and bad know English!
Cat of kernel config
machine i386cpu I686_CPUident GENERIChints gooroo.hints # Default places to
look for devices.options PAEoptions SCHED_4BSD # 4BSD scheduleroptions INET #
InterNETworkingoptions FFS # Berkeley Fast Filesystemoptions SOFTUPDATES #
Sorry, I am russian and bad know English!
Cat of kernel config
machine i386cpu I686_CPUident GENERIChints gooroo.hints # Default places to
look for devices.options PAEoptions SCHED_4BSD # 4BSD scheduleroptions INET #
InterNETworkingoptions FFS # Berkeley Fast Filesystemoptions SOFTUPDATES #
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, January 07, 2006 2:01 AM
Subject: Problem with Usb Mobile data cabel on prolific2303
Sorry, I am russian and bad know English!
Cat of kernel config
machine i386cpu I686_CPUident GENERIChints
You might want to reorganize your message.
Andreas
--
GnuPG key : 0x2A573565 | http://cyb.websimplex.de/pubkey.asc
Fingerprint: 925D 2089 0BF9 8DE5 9166 33BB F0FD CD37 2A57 3565
signature.asc
Description: This is a digitally signed message part
On Saturday, 7 January 2006 at 2:01:25 +0200, [EMAIL PROTECTED] wrote:
Sorry, I am russian and bad know English!
You're still going to have to tell us what your problem is.
Cat of kernel config
machine i386cpu I686_CPUident GENERIChints gooroo.hints # Default places to
look for
On 1/7/06, ann kok [EMAIL PROTECTED] wrote:
Hi all
I use feebsd 4.11 as router with intel Giga card about
1 year
Recently, the bandwidth couldn't grow and stop to
about 383M. ls it the maximum thoughtput of the
freebsd?
Yes, FreeBSD has quite a few limits hardcoded which
gives other OSes
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, January 07, 2006 2:01 AM
Subject: Problem with Usb Mobile data cabel on prolific2303
Sorry, I am russian and bad know English!
Cat of kernel config
I don't know about the English,
...Well today, I have a question that *is* unixey (yoo-knicks-ee) in
nature, but admittedly not having to do with BSD; Here,let me start
this way:
When I boot my dual-boot PC to Linux Fedora Core 4, instead of
FreeBSD *wink* I can no longer connect to the internet via SBC Yahoo
DSL as I used to
The port you are looking for is net/openldap23-server.
If you do a make config on this port and enable SASL support the
resulting package will be openldap23-sasl-server.
Regards,
Denis Lemire
On 1/6/06, Randy Schultz [EMAIL PROTECTED] wrote:
Hi there,
I had a 5.4 system running the
On 1/6/06, JD Arnold [EMAIL PROTECTED] wrote:
I'm writing a program that needs to write a file and I'd like to have it
ask for the root password and run as root, like many of the system config
applications do. Do I have to write something special, or is there some
way to tell KDE (or GNOME)
Hi There,
I am have a problem with a linksys usbbt100 bluetooth dongle.
I am running
6.0-RELEASE FreeBSD 6.0-RELEASE #0: Sat Jan 7 08:48:40 CST 2006
From dmesg I get this
ubt0: vendor 0x0a12 product 0x0001, rev 1.10/5.25, addr 2
ubt0: vendor 0x0a12 product 0x0001, rev 1.10/5.25, addr 2
Here's the situation
The machine is a SUN ULTRA 5 and I have 4 IDE devices. I am new to SUN hardware
I know much more about PC's. The first device primary master is the cdrom
which Solaris 10 and FreeBSD were successfully installed from. Currently
Solaris 10 which is the primary slave is
Dear all:
I installed my CVS repository followed the step in
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/cvs-freebsd/,
after cvs add the scripts of FreeBSD CVS repository,
when cvs commit it has failed and complains wrong information as follows:
cvs commit: cannot exec
Dear Andrew
Thank you for your help in advance
I keep checking the loading. it is running fine. the
load averages is not over to 1.0
System info:
Intel(R) Pentium(R) 4 CPU 3.00GHz
2G memory
for the sysctl var:
kern.polling.enable=1
kern.polling.user_frac=10
kern.ipc.somaxconn=2048
On Fri, 6 Jan 2006, Denis Lemire spaketh thusly:
-}The port you are looking for is net/openldap23-server.
-}
-}If you do a make config on this port and enable SASL support the
-}resulting package will be openldap23-sasl-server.
Ah, there it is. Tnx.
--
Randy([EMAIL PROTECTED])
On 2006-01-07 11:55, Jose Liang [EMAIL PROTECTED] wrote:
Dear all:
I installed my CVS repository followed the step in
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/cvs-freebsd/,
after cvs add the scripts of FreeBSD CVS repository,
when cvs commit it has failed and complains wrong
Hi,
Please don't remote the list from the recipients of the message, unless
the reply contains confidential material that you don't wish to disclose
to all the subscribers of the list. By keeping the list, you ensure
that other subscribers may reply too in case I'm wrong about something,
and
Original Message
Subject: Need Assistance Upgrading Ethereal-0.10.13_3 to 0.10.14
Date: Sat, 31 Dec 2005 00:52:21 -0500
From: Robert H. Perry [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
FreeBSD sphinx.my.domain 5.4-RELEASE FreeBSD 5.4-RELEASE #0:
Ran into the
Brian John wrote:
Hello,
I would like to write a script to monitor my internet connection status.
My home connection goes down fairly often and I would like to get an idea
for just how often it goes down and if possible how long it goes down for.
Could someone help me write a script that will
My server just was listed with Spamcop. Before I exercise my -one time-
option to de-list it I need to verify that indeed my server is not sending
spam. I have 3 win boxes routing through my FreeBSD box.
Also there are a few windows computers in the outside world that send
mail through my server
The user and group of CVS repository, commitcheck script and other scripts
both
are cvs, and my FreeBSD user account has add into cvs group, too.
Thanks!
On 2006-01-07 12:57, Giorgos Keramidas [EMAIL PROTECTED] wrote:
Who is the owner of the commitcheck script? Does it match the user or
Oh, by the way, my cvs user has added into cvs group, too.
The user and group of CVS repository, commitcheck script and other scripts
both
are cvs, and my FreeBSD user account has add into cvs group, too.
Thanks!
On 2006-01-07 12:57, Giorgos Keramidas [EMAIL PROTECTED] wrote:
Who
- Original Message -
From: jasonharback [EMAIL PROTECTED]
To: freebsd-questions@FreeBSD.org
Sent: Saturday, January 07, 2006 5:47 AM
Subject: Sparc dual boot problems
During the partition process it says I will have the option to
configure the boot
loader latter. Right now I can't
hello freebsd-question:
first ,i am sorry for my English ..
i have a box of a notebook ,install the OS freebsd5.4 .at my office
,there is wlan ,i buy a wireless card of linksys WPC11 VER.4 ..when i install
the card into my notebook ,but it not work ..
i find the quiestion
On Sat, 2006-01-07 at 05:45, David Banning wrote:
My server just was listed with Spamcop. Before I exercise my -one time-
option to de-list it I need to verify that indeed my server is not sending
spam. I have 3 win boxes routing through my FreeBSD box.
Also there are a few windows
A. On Sat, 2006-01-07 at 00:48, Peter Leftwich wrote:
...Well today, I have a question that *is* unixey (yoo-knicks-ee) in
nature, but admittedly not having to do with BSD; Here,let me start
this way:
When I boot my dual-boot PC to Linux Fedora Core 4, instead of
FreeBSD *wink* I can
On Sat, 2006-01-07 at 03:47, jasonharback wrote:
Here's the situation
The machine is a SUN ULTRA 5 and I have 4 IDE devices. I am new to SUN
hardware I know much more about PC's. The first device primary master is the
cdrom which Solaris 10 and FreeBSD were successfully installed
80 matches
Mail list logo
