On Wed, 29 Apr 2009 16:04:34 -0400 PJ wrote:
Tijl Coosemans wrote:
On Wednesday 29 April 2009 15:20:34 PJ wrote:
Cool. Then I can ask some questions regarding all of this.
rc.conf: (snipped to show the relevant entries)
font8x16=iso15-8x16
font8x14=iso15-8x14
font8x8=iso15-8x8
Hiya
I have 2 almost identicle machines running a minimal install of 7.1
(updated from 7.0 just a few weeks ago).
Todays freebsd-update worked just fine on one box, but on the other I
get
Looking up update.FreeBSD.org mirrors... 5 mirrors found.
Fetching metadata signature for 7.1-RELEASE from
Sebastiaan van Erk wrote:
Thanks for the suggestion. I tried it, but unfortunately the carp device
never leaves the INIT state when I put the ip on the bridge. :-( I did
find some similar problem here:
http://www.freebsd.org/cgi/query-pr.cgi?pr=125816
I just noticed that. On -CURRENT carp
On Thu, 30 Apr 2009 10:51:16 +0800 Mail wrote:
Good day to everybody,
I have a problem with installation vmware-server 2 for linux on my
freebsd 7.1. i install it from rpm. before it, i installed
linux_base_f9, load linux.ko, mount linprocfs.
You may have problems with FreeBSD-7.1 and
On Wednesday 29 April 2009 22:04:34 PJ wrote:
Tijl Coosemans wrote:
On Wednesday 29 April 2009 15:20:34 PJ wrote:
xorg.conf: (snip for relevant)
Section ServerLayout
Identifier X.org Configured
Screen 0 Screen0 0 0
InputDevice Mouse0 CorePointer
InputDevice Keyboard0 CoreKeyboard
Option
I have been trying for the last couple weeks to update my ports etc via
svn but each time i try i get the below msg, im running latest updated
ports atm via csup on a FREEBSD7.1-STABLE AMD64 system..
enterprise# svn up /usr/area51
svn: OPTIONS of
I have 7.1 release GENERIC installed now. (the xorg.conf problem went away
with the upgrade from7.0). I cannot get wireless to work. ath_hal is
recognized but no ath device. The wifi is atheros ar5b91on a acer aspire 4730Z
laptop. Is ath supposed to work with the ar500 series? Is here
Hello,
I'm wondering why and how it comes that after altering /etc/groups `id`
doesn't give me the additional group, while `id harry` does.
If I quit my X session and relogin it works as expected. Does gdm cache
credentials? Hard to find useful documentation for gdm...
Thanks in advance,
Inspired by the long modern installer thread I had a look at PC-BSD.
I am one of the lucky owners of a Broadcom, Dell Wireless 1390 WLAN
Mini-PCI Card
and added the ndiswrapper to support it.
I noticed that the PC-BSD tray icon could not scan the network for SSID,
while ifconfig does return
On Wed, Apr 29, 2009 at 8:35 PM, Brandon Weisz li...@avioc.org wrote:
Maxim Khitrov wrote:
On Mon, Apr 27, 2009 at 2:19 PM, Anton Yuzhaninov cit...@citrin.ru
wrote:
On Mon, 27 Apr 2009 12:28:01 -0400, Maxim Khitrov wrote:
MK I'm setting up a firewall and would like to monitor certain system
Maxim Khitrov wrote:
On Wed, Apr 29, 2009 at 8:35 PM, Brandon Weisz li...@avioc.org wrote:
I cant speak to the documentation, but this seems to limit it to listening
on a single address:
Example..
# open standard SNMP ports
begemotSnmpdPortStatus.192.168.2.254.161 = 1
Thanks, but I
On Thu, Apr 30, 2009 at 9:20 AM, Steve Bertrand st...@ibctech.ca wrote:
Maxim Khitrov wrote:
On Wed, Apr 29, 2009 at 8:35 PM, Brandon Weisz li...@avioc.org wrote:
I cant speak to the documentation, but this seems to limit it to listening
on a single address:
Example..
# open standard SNMP
Maxim Khitrov wrote:
On Thu, Apr 30, 2009 at 9:20 AM, Steve Bertrand st...@ibctech.ca wrote:
Maxim Khitrov wrote:
On Wed, Apr 29, 2009 at 8:35 PM, Brandon Weisz li...@avioc.org wrote:
I cant speak to the documentation, but this seems to limit it to listening
on a single address:
Example..
Hi,
I'm trying to solve two errors associated with running KDE over
TightVNC. When I look at the log, I consistently see these errors. I've
tried to find answers on how to solve each of them and have not had
anything work at this point.
Thanks,
-Troy
QPainter::setCompositionMode:
If I install amd64 FreeBSD on a USB stick, should I be able to boot it up on
both PC hardware (Intel core duo) and Intel Mac hardware with rEFIt?
Thanks,
Andrew
___
freebsd-questions@freebsd.org mailing list
On 4/30/09, Jeroen Hofstee freebsd.questi...@virtualhost.nl wrote:
Inspired by the long modern installer thread I had a look at PC-BSD.
I am one of the lucky owners of a Broadcom, Dell Wireless 1390 WLAN
Mini-PCI Card
and added the ndiswrapper to support it.
I noticed that the PC-BSD tray
On 4/29/09 4:59 PM, Charles Howse cho...@charter.net wrote:
I recall Bill Gates saying, 640k is enough for anybody. I agree,
it's not much of a savings, and there's always the possibility that
the webmaster may add something later that needs a module that's
commented, and run around in
Paul B. Mahol wrote:
It appears that the tool assumes SSID are reported as
SSIDsession, which is not the case here. My list is similar as listed
in the handbook,
Looking at ifconfig, it appears to me that the ieee80211 part queries
the kernel and prints the returned values.
I therefore assume
something I wonder about
I know OpenBSD and FreeBSD both have different versions of the UFS
filesystems
(FreeBSD newfs(8) -O option, OpenBSD newfs(8) -O)
has someone tried to use all combinations of all options to see if they
work?
It's funny that OpenBSD's manpage says it uses FFS, not UFS
On Thu, Apr 30, 2009 at 9:39 AM, Steve Bertrand st...@ibctech.ca wrote:
I see now what you are saying:
# sockstat -l4
root bsnmpd 2857 5 udp4 *:* *:*
root bsnmpd 2857 6 udp4 127.0.0.1:161 *:*
root bsnmpd 2857 7 udp4
Morgan Wesström wrote:
So I have two questions:
1) Is --with-mib-modules=if-mib already covered in the Makefile? I can
see the parameter but it refers to a variable I don't know the contents
of. The variable seems to refer to the build option NET_SNMP_MIB_MODULES
which is mentioned at the
Aurélien Ansel aurelien.an...@netasq.com writes:
Hi,
(sorry for my poor english)
I have a problem, I'm trying to upgrade an existing port (net/scapy) ,
I have done some changes in the Makefile but when I test the command
make config' I have :
=== Options unchanged
I haven't the
Using disklabel -A /dev/da0s1 I would like to see the sizes in G or M
format, how can I do this?
Also, googling arround i found output showing the cylinder space occupied
by a partition (like :
# cyl* X - Y ). How do I see that ?
PS: i did man disklabel and bsdlabel but i didnt find
On Thu, Apr 30, 2009 at 12:51 PM, Anonymous tutor...@gawab.com wrote:
Also, googling arround i found output showing the cylinder space occupied
by a partition (like :
# cyl* X - Y ). How do I see that ?
I think that fdisk will show you this.
Good luck--
On Thu, 30 Apr 2009 09:11:28 -0600, Tim Judd taj...@gmail.com wrote:
It's funny that OpenBSD's manpage says it uses FFS, not UFS -- when even I
thought it said UFS before I looked it up.
Don't FFS and UFS refer to the same file system, the
Berkeley Fast File System, also known as 4.2bsd? In
my
In the last episode (Apr 30), Harald Schmalzbauer said:
I'm wondering why and how it comes that after altering /etc/groups `id`
doesn't give me the additional group, while `id harry` does. If I quit my
X session and relogin it works as expected. Does gdm cache credentials?
Hard to find
Hi Mel
I tried your suggestions by giving values
vm.kmem_size_max=1024M
vm.kmem_size=1024M
but still got mysql hung without any luck here is the top output:
even though there is plenty of free memory
Guys, I am not very good on freebsd, its you guys who help me to
2) Is there anyway to enable these two options during make without
editing the Makefile?
2. The easiest way is to set the define upon running make
[/usr/ports/net-mgmt/net-snmp]$ make -DWITH_MFD_REWRITES install clean
Thanks Steve, I actually tried that before posting but thought I made
Hi, VeeJay--
On Apr 30, 2009, at 12:02 PM, VeeJay wrote:
Guys, I am not very good on freebsd, its you guys who help me to
keeping my
server up... I hope you can spare a few minutes to sort this
problem...
last pid: 19656; load averages: 1.00, 1.00,
1.00
up 2+05:00:12 19:18:47
3049
Hi, VeeJay--
On Apr 30, 2009, at 12:02 PM, VeeJay wrote:
Guys, I am not very good on freebsd, its you guys who help me to
keeping my
server up... I hope you can spare a few minutes to sort this
problem...
last pid: 19656; load averages: 1.00, 1.00,
1.00
up 2+05:00:12 19:18:47
3049
Frederique Rijsdijk wrote:
Chris Whitehouse wrote:
I'm not getting any replies when searching the freebsd questions
archives at http://lists.freebsd.org/pipermail/freebsd-questions/
That's the page I get to if I google freebsd questions archives (and
then a couple of clicks to get to the
Sorry, I figured the problem, I edited the group file and added my name
to the group wheel and still not getting su to work.
VJ
Viraj Dixit
City of Palo Alto Information Technology
650-329-2118
From: Dixit, Viraj
Sent: Thursday, April 30, 2009 3:34 PM
Hi,
I just installed Free BSD OS 7.1 and installation went without any
errors, all looks good till I try to login with SU account via telnet
and I get this error below. Please help!!
VJ
___
freebsd-questions@freebsd.org mailing list
Sorry, I have the answer, my apologize to all.
VJ
Viraj Dixit
City of Palo Alto Information Technology
650-329-2118
From: Dixit, Viraj
Sent: Thursday, April 30, 2009 3:46 PM
To: 'freebsd-questions@freebsd.org'
Subject: RE: SU Question
Sorry, I
On Thu, Apr 30, 2009 at 08:51:13PM +0300, Anonymous wrote:
Using disklabel -A /dev/da0s1 I would like to see the sizes in G or M
format, how can I do this?
Also, googling arround i found output showing the cylinder space occupied
by a partition (like :
# cyl* X - Y ). How do I
Hello, everybody. I have installed diablo-jdk16 on my FreeBSD 7.1 system.
However, when I run the TopCoder Competition Arena, it failed to validate the
certificate. And the details out put are below
java.lang.RuntimeException: Unexpected error:
On 4/30/09, Jeroen Hofstee freebsd.questi...@virtualhost.nl wrote:
Paul B. Mahol wrote:
It appears that the tool assumes SSID are reported as
SSIDsession, which is not the case here. My list is similar as listed
in the handbook,
Looking at ifconfig, it appears to me that the ieee80211 part
You can reuse the old one.
I'm not an expert on these, but it was my understanding that
certificates carry in internal expiration date after which the
application may respond as it pleases.
Yes, but the *request* does not.
Also, if using openssl, just set the defaults in /etc/ssl/
This patch worked for me:
https://lists.gnucash.org/pipermail/gnucash-user/2009-April/029582.html
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
I am using pcbsd 6.3
When I try to use apache22 or kdesvn I get an error message (Shared object
libthr.so.3 not found, required by libapr-1.so.2)
Can anyone help me?
Bob Falanga
___
freebsd-questions@freebsd.org mailing list
40 matches
Mail list logo
