Hi Daemons,
I bet there are FreeBSD-on-Thinkpad users out there. I need some help..
At the moment I search for a laptop, a used model from auction sites,
preferably an IBM Thinkpad. There is a huge number of different models, even a
Wiki with all the specs. But all the info doesn't help me to
LS,
I am trying to get pgpsenmail working but i can't figure out what to do.
For example which instance of sendmail can/must be replaced:
/usr/libexec/sendmail (which is symbolic link)
/usr/sbin/sendmail
in both cases, i get the following message:
/etc/rc.d ./sendmail restart
sendmail not
On Sun, Aug 2, 2009 at 6:48 AM, Familie van der
Schaftfam.vandersch...@kpnplanet.nl wrote:
LS,
I am trying to get pgpsenmail working but i can't figure out what to do.
For example which instance of sendmail can/must be replaced:
/usr/libexec/sendmail (which is symbolic link)
What do you
Glenn,
My mailer.conf contains:
/etc/mail cat mailer.conf
# $FreeBSD: src/etc/mail/mailer.conf,v 1.3.34.1 2009/04/15 03:14:26 kensmith
Exp $
#
# Execute the real sendmail program, named /usr/libexec/sendmail/sendmail
#
sendmail/usr/libexec/sendmail/sendmail
send-mail
Hi gaise,
i'm trying to mount a memory stick card on my Sony Portable Reader PRS-505
device and constantly getting the Error received from start unit command
message when issuing camcontrol load command.
Here is the full log:
[r...@morbo /usr/home/andrei]# camcontrol rescan all
Re-scan of bus 0
Thanks Dan, it was WxGTK2 that caused the issue. It was solved by a simple
portupgrade wxgtk2.
Leonardo M. Ramé
http://leonardorame.blogspot.com
--- On Sat, 8/1/09, Dan Nelson dnel...@allantgroup.com wrote:
From: Dan Nelson dnel...@allantgroup.com
Subject: Re: Filezilla doesn't work after
Hi, my home computer is a Dell Inspiron 1525. When I use it in Windows, the
touchpad is automatically disabled when I connect an USB mouse. I noted in
FreeBSD the mouse and touchpad are allways enabled.
Does anyone knows how can I fix this?.
Leonardo M. Ramé
http://leonardorame.blogspot.com
Hi,
I received this erron on my Freebsd 7-Stable (1 or 2 months old).
I dont know how to read this error. Is this hardware? Or a software issue?
Box is still running, 3 x SCSI and a ZFS pool on 3 SATA disks.
Cheers,
Patrick
Logs
+ahd0: Transmission error detected
+LQISTAT1[0x0]
One of my not-for-profit websites is increasing in popularity and
users are requesting forums. I am going to add forums now, but I'm
not sure which route to take:
1. Install the forums software so it runs on my webserver.
2. Use some third-party forums website [with their advertising probably].
Trying to apply this to a 6.4 box with no manpages install. Install
fails because the man3 directory doesn't exist. is this expected?
Adding the src.conf knob of WITHOUT_MAN=1 still prevents the updated
libraries to install.
I'm just following the directions on the advisory and doesn't install
Hello everybody...
Need to view and get real-time reporting of outgoing channel to Internet?
I think, that this is may be realized by means of ipfw (e.g. - get counters
of count rules for Internet and divide them to time, which passed between
analyzing)
But, maybe, there is an utility, to which I
I have 2 servers running what should be identical copies of 7.2
release. I am plugging in an Apple USB Ethernet adapter and on one
server I get this:
ugen3: vendor 0x05ac product 0x1402, class 255/255, rev 2.00/0.01,
addr 2 on uhub7
and on the other I get this:
ugen0: Apple Inc. Apple
I've had great success with my my T43. I strongly recommend it.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Avoid T42 (2374-K5U). Everything works fine, but it's an oddball version
apparently and there is next to no documentation regarding it on many of the
wiki sites. There are many decent models of T42. I'd just avoid this
particular model to avoid confusion.
Thanks,
Randy
-Original
this issue still exists in BETA-2. imo it really needs to be fixed before the
release of 8.0. if i were to test a new OS and discover that it comes with an
editor which crashes when opening a new term i'd be very frustrated.
alex
___
On Fri, Jul 31, 2009 at 02:32:49AM -0400, Daniel Underwood wrote:
Can anyone suggest a fast graphical web browser? I use Firefox
(because every page displays well and I can sync bookmarks), and I
also use elinks (when graphics don't matter). I'm looking for some
middle ground, a browser
almost any NIC / OS will support SNMP MIB-II counters, which includes octets Tx
and Rx. MANY tools available for getting snmp mib values.
If you want util AND details on IP, ports, etc. - check out nTop.org
- Original Message -
From: owner-freebsd-questi...@freebsd.org
I have a situation that I've come across from time to time that I have
never found a good fix for.
Sometimes I'll install a freebsd box at a site with private addresses
(RFC 1918). Most of the time these sites also have local DNS setups.
I'll take my home network as an example. My FreeBSD box
I've had great success with my my T43. I strongly recommend it.
Everything on my T43 works with without any extra configuration. The
only drivers you have to mess with are the wireless drivers. But the
iwi drivers work perfectly, and you can configure them easily a few
extra lines in
On Fri, Jul 31, 2009 at 02:32:49AM -0400, Daniel Underwood wrote:
Can anyone suggest a fast graphical web browser? I use Firefox
(because every page displays well and I can sync bookmarks), and I
also use elinks (when graphics don't matter). I'm looking for some
middle ground, a browser
Another idea could be giving 7.x a shot as it has newer version of PF IIRC.
That's on the list of things to try, but upgrading will probably be painful,
so I'm hoping to find something else first.
Something else you might want to try is to find/install the new PF from
source, if you
Is there a way to get freebsd-update to keep userland sources up to
date?
I had thought that having src, world and kernel as components in the
freebsd-update.conf file would do this but it doesn't seem to. Do I
just add usr.bin and usr.sbin to the components list in the conf file
and run
For now, I'd suggest avoiding the T500 series as well. They're good
machines, but you're basically stuck (for now) with either the
integrated graphics or the radeon driver (which still is spotty on X).
Randy Booth wrote:
Avoid T42 (2374-K5U). Everything works fine, but it's an oddball
On Aug 2, 2009, at 8:22 PM, Danny Carroll wrote:
MASQUERADE_AS(`mypublicdomain.com')dnl
FEATURE(masquerade_envelope)dnl
MASQUERADE_DOMAIN(beasie.lan)dnl
Recompiled the cf files and restarted sendmail.
Here is the kicker. If I log in as a normal user it masquerades just
fine.
If I simply su
On Aug 2, 2009, at 8:22 PM, Danny Carroll wrote:
I've added the following to the default sendmail mc file:
MASQUERADE_AS(`mypublicdomain.com')dnl
FEATURE(masquerade_envelope)dnl
MASQUERADE_DOMAIN(beasie.lan)dnl
Recompiled the cf files and restarted sendmail.
Here is the kicker. If I log in
2009/8/2 Tom Mende tme...@optusnet.com.au:
Is there a way to get freebsd-update to keep userland sources up to date?
I had thought that having src, world and kernel as components in the
freebsd-update.conf file would do this but it doesn't seem to. Do I just add
usr.bin and usr.sbin to the
Jeffrey Goldberg wrote:
I found the answer to your problem here:
http://www.grok.org.uk/docs/smroot.html
The file that is being included which has the
EXPOSED_USER(`root')
line lives at
/usr/share/sendmail/cf/domain/generic.m4
Just make a copy of that file, call it
Hello
My goal is to authenticate my Cyrus Imapd users against Windos 2003
Active Directory with Kerberos . I have the following setup:
Kerberos5 client
===
FreeBSD acsvfbsd06.domain.tld 7.2-RELEASE FreeBSD 7.2-RELEASE
/etc/krb.conf:
[libdefaults]
default_realm = domain.tld
28 matches
Mail list logo
