No I have not installed from the mini-inst, but from the standard FreeBSD
5.3R release disk #1.
Anything else that could be the cause of my problem?
--
Kiffin Rex Gish
Gouda, The Netherlands
-Original Message-
From: Joshua Lokken [mailto:[EMAIL PROTECTED]
Sent: Friday, December
On Saturday 04 December 2004 03:09 am, Kiffin Gish wrote:
No I have not installed from the mini-inst, but from the standard
FreeBSD 5.3R release disk #1.
Anything else that could be the cause of my problem?
Do you mean that the X Window system is not installed, or that XFree86
is not
Dear list,
Installing FreeBSD 5.x (5.0, 5.1, 5.2, 5.2.1, and 5.3) on my Acer Travelmate
603TER the machine freezes after being up for a few seconds (just enough
time to mount my USB stick and save a dmesg). On 5.3R I get an ata1-slave:
FAILURE - ATAPI_IDENTIFY timed out error message (I am not
This isn't on-topic for the list, but I'll answer it anyway. The Apache
parent runs as root so that it can attach to port 80. After a packet reaches
port 80, Apache will hand it off to a child process running as www. The
parent process also does other housekeeping duties as you would expect from
On Sat, 4 Dec 2004 04:47:49 -0500, Peter C. Lai [EMAIL PROTECTED] wrote:
This isn't on-topic for the list, but I'll answer it anyway. The Apache
parent runs as root so that it can attach to port 80.
[...]
On Sat, Dec 04, 2004 at 07:24:27AM +0100, Jesper Wallin wrote:
[...]
If I got a
Ted Mittelstaedt wrote:
Keep in mind that the way this bug works is when you have a hard disk
on the first IDE controller and a CDROM on the second (as you do here)
when they are both transferring data at the same time the CMD 640 chip
corrupts the data. You can fix it by moving the CD to the
On Sat, 4 Dec 2004, csnyder wrote:
On Sat, 4 Dec 2004 04:47:49 -0500, Peter C. Lai [EMAIL PROTECTED] wrote:
This isn't on-topic for the list, but I'll answer it anyway. The Apache
parent runs as root so that it can attach to port 80.
[...]
On Sat, Dec 04, 2004 at 07:24:27AM +0100,
On Fri, 03 Dec 2004 18:38:02 -0500 Trey Sizemore [EMAIL PROTECTED]
wrote:
|Date: Fri, 03 Dec 2004 18:38:02 -0500
|From: Trey Sizemore [EMAIL PROTECTED]
|Subject: Re: Sound and KDE
|To: [EMAIL PROTECTED]
|Message-ID: [EMAIL PROTECTED]
|Content-Type: text/plain
|
|On Fri, 2004-12-03 at 17:17 -0500,
What I mean is that normally after the installation when you run sysinstall
there is an item in the list allowing for configuration of XFree86 but that
does not appear on my machine.
Isn't it supposed to be there? How else can I reconfigure it?
--
Kiffin Rex Gish
Gouda, The Netherlands
Hi,all,
I really want to know if there is a way to install freebsd from hard
disk. This old laptop doesn't contain a floppy drive, And I didn't get a
CD burner either. Certainly, The rubbishy computer couldn't be boot use
pxe kind of thing. I've searched google and I have done what I can do
for
Hi,
I've instaled Apache port 1.33 and then mod_php 4.3.9
Well, when i try next to install PEAR and PHP-cli versions 4.3.9, i get
an error, because according to the system, mod_php4 is actually 4.3.9,1
and is incompatible with the others.
So, things don't match :(
How to solve this ?
Any help
Hey i was using RC1 version of freebsd, and today i upgrade fallowing these
steps:
#cd /usr/src
#make buildworld
#make buildkernel KERNCONF=MINE
#make installkernel KERNCONF=MINE
#reboot
(press 4 for single-user mode)
#fsck -p
#mount -u /
#mount -a
#cd /usr/src
#mergemaster -p
#make installworld
I was running a FreeBSD 4.3 system. It crashed and I
built up a new FreeBSD 4.10 system. But I cannot get
Sendmail to work the way it did before.
The relevant part of my network includes two hosts,
call them FIRE and BASHFUL. FIRE is my firewall
machine, It runs FreeBSD 4.3 and has not
I was trying to test my ability to recover from a disk
crash and managed to toast my system disk. Therefore,
I do not have any relevant vinum history file or
messages file.
What happened is that I purposely blew away the drive
named ahc0t15, and was trying to recover it.
In error, I ran the
ey,i upgrade using that options:
#cd /usr/src
#make buildworld
#make buildkernel KERNCONF=MINE
#make installkernel KERNCONF=MINE
#reboot
(press 4 for single-user mode)
#fsck -p
#mount -u /
#mount -a
#cd /usr/src
#mergemaster -p
#make installworld
#mergemaster
and when i reboot, freebsd stops under
On Sat, 2004-12-04 at 07:28 -0500, Gerard Seibert wrote:
** Reply Separator **
Saturday, December 04, 2004 7:21:44 AM
If I am understanding you correctly, I have to add that information
into the '/boot/bootloader.conf' file even though I have sound compiled
into my
I did a stupid thing and zapped my system FreeBSD 4.3
system disk (/dev/ad0) with FDISK and Label (in
/stand/sysinstall)instead of zapping /dev/da0 that I
intended to do. Needless to say, my system got sick.
I have built a new FreeBSD 4.10 system on another disk
and have the old (zapped) system
On 12/01/04 11:57 AM, Kenneth Culver sat at the `puter and typed:
SNIP
Well I just updated to the latest stable today, and set everything to use the
nvidia agp driver, and it decided to start working. I'm just going to throw my
hands up and be glad it's working now.
Still at 5.3 RELEASE,
I need help installing FreeBSD 5.3 as the second OS on my workstation. I
have a 501 Mhz Pentium processor with Windows XP Professional and a 28Ghz hard
drive that's divided into four equal sized primary partitions. I also have boot
manager Boot-US 2.0.6 installed. How do I Install
On Sat, 04 Dec 2004 13:57:28 +0100
Kiffin Gish [EMAIL PROTECTED] wrote:
What I mean is that normally after the installation when you run
sysinstall there is an item in the list allowing for configuration of
XFree86 but that does not appear on my machine.
Isn't it supposed to be there? How
hi,
i get this when #make buildworld (cvsupped today):
(thanks in advance)
/libc/../../contrib/gdtoa -DINET6 -I/usr/obj/usr/src/lib/libc -DPOSIX_MISTAKE
-I/usr/src/lib/libc/lo
cale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN -I/usr/src/lib/libc/rpc -DYP
-DHESIOD -Wsystem-headers -We
rror -Wall
I recently switched virus software to F-Prot for Windows. I has located
a bug on all of my directories related to your newsletters. The same bug
exists in my Mozilla email software and Thunderbird email software.
I have a separate directory which the FreeBSD newsletters and emails go
into
who do I go about contacting to let them know of a small mistake in
the handbook under a section?
thanks.
--
robg
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
On Sat, Dec 04, 2004 at 03:03:37PM -0500, robg wrote:
who do I go about contacting to let them know of a small mistake in
the handbook under a section?
[EMAIL PROTECTED] is the right place and/or via a PR
What is the error you talk about?
Marc
___
Hi,
Running a 5.2.1-Current box. After we suffered a power outage, and the UPS went
offline, the FBSD shut down ugly.
I get the usual messages scrolling by when I try to boot, but as soon as the
drive gets mounted, I see nothing but zillions of scrolling messages without
newlines:
On Sat, Dec 04, 2004 at 03:34:54PM +, Luciano Musacchio wrote:
###modified variables in make.conf:
CFLAGS= -O3 -pipe -funroll-loops -ffast-math -fomit-frame-pointer
COPTFLAGS= -O2 -pipe -funroll-loops -ffast-math -fomit-frame-pointer
Don't do this. See make.conf(5).
Kris
On Sat, Dec 04, 2004 at 03:44:56PM +, Marta Resende wrote:
, and during mergemaster it shows me the opttion to change FreeBSD 5.3-RC1
for FreeBSD ?.?.? (UNKNOWN), although i think that freebsd change that will
rebooting, but when i enter my username and posswd:
FreeBSD ?.?.? (UNKNOWN)
Hello,
I am running FreeBSD 5.3-p2 on a Dell Latitude LS notebook. (See
KERNCONF and dmesg at the end.) Nearly everything is working fine,
except for the sound chip. I built the sound stuff as modules
(sound/pcm + sound/driver/neomagic).
When I try to insert the module, I get
# kldload
On Sat, Dec 04, 2004 at 09:55:18PM +0100, Jan Stary wrote:
Hello,
I am running FreeBSD 5.3-p2 on a Dell Latitude LS notebook. (See
KERNCONF and dmesg at the end.) Nearly everything is working fine,
except for the sound chip. I built the sound stuff as modules
(sound/pcm +
this is a bit out of the blue, I just cvsuped port
tree on fbsd5.3, and want to install fluxbox-devel,
but all of a sudden, I found my system can't fetch the
tar ball no more, it went through all the mirror sites
and reported file not found. I have to d/l the
source myself. Is there anything I
On Sat, 4 Dec 2004, Pico Pico wrote:
I recently just cvsup'd my ports tree then portupgrade -a...
Unfortunately after that i started to have issues with Qtorrent and Nicotine
not starting up...
I *thought* my problem was with qtorrent/py-qt so i did a make deinstall
clean on both.. Now I
Hello,
I've got a 5.3 machine that i installed Xorg on via ports:
cd /usr/ports/x11/xorg
make install clean
this went flawlessly, but when i ran:
Xorg -configure
i got the following output:
/var/log/Xorg.0.log:
Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
On Fri, 3 Dec 2004, Kris Kennaway wrote:
On Sat, Dec 04, 2004 at 03:30:36AM +, Pico Pico wrote:
I recently just cvsup'd my ports tree then portupgrade -a...
Unfortunately after that i started to have issues with Qtorrent and
Nicotine not starting up...
I *thought* my problem was
Lloyd Hayes wrote:
I recently switched virus software to F-Prot for Windows. I has located
a bug on all of my directories related to your newsletters. The same bug
exists in my Mozilla email software and Thunderbird email software.
I have a separate directory which the FreeBSD newsletters and
I am trying to do the portupgrade of amavisd:
portupgrade -o /usr/ports/security/amavisd-new amavisd-new-20030616.p9
and getting the following error as it tries to build the required
cabextract port:
esmtp# make all install
=== Building for cabextract-1.1
make all-am
cc -DHAVE_CONFIG_H -I.
Sorry it took so long. It worked Thanks so much. Moregroupware is still not up
do to MySQL password but I'm sure it has something to do with how I'm doing
it. But thanks again.
On Wednesday 01 December 2004 05:42 pm, Kevin D. Kinsey, DaleCo, S.P. wrote:
Justin L. Boss wrote:
Ya, I seen
I have plugger-5.1.2 (in mozilla) working with mplayer-0.99.5_2 on
5.3-Release - all software is compiled from the ports..
For the most part is seems to working beautifully, however, for the live
of me, I can't seem to get the fullscreen mode f working when mplayer
is called to play a movie
On 2004-12-04 08:01, orville weyrich [EMAIL PROTECTED] wrote:
I was running a FreeBSD 4.3 system. It crashed and I built up a new
FreeBSD 4.10 system. But I cannot get Sendmail to work the way it did
before.
The relevant part of my network includes two hosts, call them FIRE and
BASHFUL.
Hello,
I have a computer (x86 with one IDE drive) which I would like to host both
FreeBSD and Linux. I installed Linux there, and it works fine. I then
tried to install 5.3-RELEASE from the CD, but the installer failed to find
the hard drive and locked with the error message
ata0-master:
ENVIRONMENT.
Compaq Presario sr1053wm.
I can't provide log files at this point because freebsd works badly
on my machine.
DESCRIPTION
---
I have installed freebsd 5.2.1 about 20 times with various options on
my machine. The result is always the same.
The XFree 86 server always
Hi :)
I was just wondering what precise piece of software I should use to convert
sgml to PDF?
Just sort of asking for a general opinion of what is the _best_ software for
this job, etc.
I am signed onto freebsd-questions, etc.
Thank you muchly.
pgp1BaiSeYVcq.pgp
Description: PGP
Edward Carmody wrote:
Hi,
Running a 5.2.1-Current box. After we suffered a power outage, and the UPS went
offline, the FBSD shut down ugly.
I get the usual messages scrolling by when I try to boot, but as soon as the
drive gets mounted, I see nothing but zillions of scrolling messages without
I don't no jack about Radius I need info. As far as I have gotten is:
download
gunzip untar
./configure
make
make install
now what do i do?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
FreeBSD-4.9
1) I have a second backup drive in my sevrer that I am currently rsync'ing
every 24 hours. I like the fact that there is a little bit of a stagger
between the drives. is there a better option then rsync'ing?
2) How can I verify if this drive is bootable? If I loose the main
Thanks to those who replied. I solved the problem by
building a new sendmail.cf file with the following
added features not found in the stock freebsd.cf:
define(`SMART_HOST',`FIRE')
FEATURE(accept_unresolvable_domains)
MASQUERADE_AS(`MYDOMAIN.COM')
and tweeking my /etc/hosts file on BASHFUL
Has anyone else heard of these great idea? If you are intrested sign
the petition so the company backing it, Tech Source, will fund it.
Please check this link with plenty of info about.
http://lists.duskglow.com/mailman/listinfo/open-graphics
___
On Sat, 4 Dec 2004 19:55:58 -0800 (PST), Andreas Magana
[EMAIL PROTECTED] wrote:
I don't no jack about Radius I need info. As far as I have gotten is:
download
gunzip untar
./configure
make
make install
now what do i do?
Read all available documentation here:
I have an IDE tape drive, a Seagate STT2A TR-5, which I have
used for backups with FreeBSD 3.4, 4.3, and 4.7. I have a script that
dumps all my partitions, one after the other, and depends on dump -a
to notice end-of-tape and prompt me to switch tapes.
I just moved up to 4.10 --
48 matches
Mail list logo
