On 2005-05-15 02:03, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote:
> On 5.3 everything was working fine, I would be emailed daily/weekly/
> monthly log reports. But now after upgrading to 5.4 I am seeing all
> those log report emails being queued up in postfix.
>
> The problem is it is trying to c
On 5.3 everything was working fine, I would be emailed daily/weekly/
monthly log reports. But now after upgrading to 5.4 I am seeing all
those log report emails being queued up in postfix.
The problem is it is trying to connect to the wrong IP...
the machines default IP is 1.1.1.1 (for simplici
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of fbsd_user
> Sent: Saturday, May 14, 2005 12:54 PM
> To: [EMAIL PROTECTED] ORG
> Cc: [EMAIL PROTECTED]
> Subject: 5.4 install disc1 will not find hard drive
>
>
> Power management and APIC have been bios
On Sun, 15 May 2005, Vittorio De Martino wrote:
> I have the latest installation of freebsd 5.4 on my laptop, kde & kdm 3.4. The
> laptop has a synaptic mousepad endowed of two buttons that in normal
> conditions are not used at all being enough to double-hit on the pad to have
> the same effect a
Well, your skirting the thin edge since you obviously have a dual-boot
system - but if a fsck of the FreeBSD partition, and a chkdsk /f of the
XP partition turn up nothing, your probably fine.
What is going on is your motherboard BIOS is old, and doesen't understand
disk drives that report more t
On Sat, 14 May 2005, fbsd_user wrote:
> I have seen this problem on the questions list since 5.0 first can out as
> development version. Here 5.4 is now stable release and this problem is
> still not fixed. I have been using the same pc to test installing stable
> versions from miniinst.iso every
Insert this in your XF86Config file (or xorg config file)
For a wheel mouse, in the following section of XF86Config:
Section "InputDevice"
Identifier "Mouse0"
add the following:
Option"Buttons" "5"
Option"ZAxisMapping" "4 5
Does anyone know how to turn off the annoying beep when
BSD partition selector comes up?
Also, has anyone got a decent setup for a synaptics touchpad
attached to a Dell Inspiron 1150 laptop?
5.4-STABLE
Thanks in advance! :)
--
Allan Bowhill
[EMAIL PROTECTED]
c1afddf65d9d9811141cf67b033f535
On 5/15/2005 7:27, Roman Shakin wrote:
I am trying to get my mouse scrolling to work in firerox, and I did
the Zaxizmapping 4 5 in xfree config. And my what my wheel does
instead of page down and up it does back and forward button. What can
I do?
Install imwheel from the ports collection and ma
Chuck Swiger wrote:
> Ed Stover wrote:
> [ ... ]
>
>> I know some people that run big brother and are satisfied by it.
>> http://www.bb4.org/
>
>
> I would second this recommendation. Big brother is relatively simple to
> configure, although it is by design more of a monitoring tool, and is
> l
I am trying to get my mouse scrolling to work in firerox, and I did the
Zaxizmapping 4 5 in xfree config. And my what my wheel does instead of
page down and up it does back and forward button. What can I do?
--
--
Roman Shakin
[EMAIL PROTECTED] (email)
+1 (70
Thank you for your email. You should receive a response within one
business day during our normal business hours. Our normal business
hours are: Monday-Thursday 9am-Midnight ET and Friday 9am-8pm ET.
Question Reference #050514-000916
-
On Sat, 14 May 2005 19:11:22 +0200, in sentex.lists.freebsd.questions
you wrote:
>If yes, is there a way to set it up to perform some read-ahead?
Hi,
Take a look at the -a and -r options on mount_nfs
---Mike
Mike Tancsa, Sentex c
hi,
I have an IBM removable cdrom device which I'm trying to use under
FreeBSD-5.4 RELEASE. I connect it on the USB ports on my ThinkPad X40, insert a
cdrom (neil young) but I cannot mount it:
"mount -t cd9660 /dev/cd0 /mnt/cdrom" yields:
cd9660: /dev/cd0: Device not configured.
A "dmesg" th
Timothy Smith wrote:
Alex Zbyslaw wrote:
Timothy Smith wrote:
./configure gets
*** The libIDL-config script installed by libIDL could not be found
*** If libIDL was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the LIBIDL_CONFIG environment variable to the
*** full path to l
or
just to be a know-it-all with anither answer
pw usermod -s
I personally use vipw to mod user account info, but use this to add
users.
Good Luck
-steven
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of mojo fms
Sent: Saturday, May 14, 2005 1
in message <[EMAIL PROTECTED]>, wrote Per Berger
thusly...
>
> The handbook says that I can add "security.*" in syslog.conf and
> specify a logfile to log the firewall. But there is already an
> entry in syslog.conf "security.*" from install ( I am running
> 5.4-RELEASE upgraded from 5.3 via cvsup
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Fabian
Keil
> Sent: Saturday, May 14, 2005 5:22 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED] ORG
> Subject: Re: clone cd disk to cd disk
>
> Its my understanding both of your suggestions only read the
On Sun, May 15, 2005 at 01:14:21AM +0200, VnPenguin wrote:
> Hi all,
> On my FreeBSD 5.4 system, when I do "reboot" or "shutdown -h " and
> reboot, there is always a warning at boot time:
>
> WARNING: / was not properly dismounted
>
> and fbsd starts filesystem check over / partition (~5GB) :(
>
Hi all,
On my FreeBSD 5.4 system, when I do "reboot" or "shutdown -h " and
reboot, there is always a warning at boot time:
WARNING: / was not properly dismounted
and fbsd starts filesystem check over / partition (~5GB) :(
Anyone could explain me why this ? Any solution for help ?
Thank you,
___
Hi all,
I have FreeBSD 5.4 installed after a buildworld from 5.3 .
The problem is that during the setup of the system a warning message
appeared and notified me something about "Wrong disk geometry" or
something like that. I ignored the message and installed the system
which booted and worked fin
On 14 mei 2005, at 22:14, yuri van Overmeeren wrote:
There are no small parts. Only small actors.Acting is not being
emotional, but being able to express emotion.Achilles absent was
Achilles still!
They are so young and have very beautiful bodies, and now when
theyre 18, theyll do all what y
I have the latest installation of freebsd 5.4 on my laptop, kde & kdm 3.4. The
laptop has a synaptic mousepad endowed of two buttons that in normal
conditions are not used at all being enough to double-hit on the pad to have
the same effect as that of pressing the left button.
Now at boot time I
"fbsd_user" <[EMAIL PROTECTED]> wrote:
> "fbsd_user" <[EMAIL PROTECTED]> wrote:
>
> > Looking for command line job that will clone a bootable cdrom disk
> raw
> > sector by sector to blank cdrom so its also bootable.
> >
> > Any recommendations on how to do this so?
>
> I would chose readcd + cd
On Sat, May 14, 2005 at 03:23:53PM -0700, Cheng Jin wrote:
>
> Hi,
>
> Is there a way to compile only kernel modules that one needs like
> with Linux's configuration file? I included only the drivers I
> need in the kernel config file, but all the modules got compiled
> anyway. :(
>
> I looked
Hi,
Is there a way to compile only kernel modules that one needs like
with Linux's configuration file? I included only the drivers I
need in the kernel config file, but all the modules got compiled
anyway. :(
I looked around both in the kernel config dir and google, but didn't
find anything that w
In the last episode (May 14), Guilherme said:
> How to install a hba device in freebsd 5.4?? This device is emulex
> model lp982... The device was found, but dmesg show me this: "
> at device 7.0 (no driver attached)".
> Which module I have to load in the kernel??
There are no Emulex drivers for
On Sun, Jan 03, 1999 at 04:20:12AM +, paul klatt wrote:
> I am having a problem configuring x in free bsd I am having problem disabling
> the virtual desktop the desktop is to large for my monitor and the mouse does
> not work correctly. I would appreciate the help. I am using the kde desktop
I recently purchased a new computer that came with the new Intel High
Definition Audio integrated sound. I can't seem to get the audio working.
I tried snd_ich since it looks like this chipset is ICH6, but this did not
work for me. Below is the output of pciconf for this device:
[EMAIL PROTECT
"fbsd_user" <[EMAIL PROTECTED]> wrote:
> Looking for command line job that will clone a bootable cdrom disk
raw
> sector by sector to blank cdrom so its also bootable.
>
> Any recommendations on how to do this so?
I would chose readcd + cdrecord, but dd + burncd should work
as well and can be u
I'm sorry I was not more specific.
/var has 256MB
/tmp has 256
/ has 256
/usr has 4500MB
newfs had been run on everything.
ftp was passive.
Since base is about 46MB of material, it seems it could put it anywhere.
This occurs 3% of the way into the extration of base into / via
ftp. I did burn a
"fbsd_user" <[EMAIL PROTECTED]> wrote:
> Looking for command line job that will clone a bootable cdrom disk raw
> sector by sector to blank cdrom so its also bootable.
>
> Any recommendations on how to do this so?
I would chose readcd + cdrecord, but dd + burncd should work
as well and can be us
In article <[EMAIL PROTECTED]> you write:
>Steve Rikli <[EMAIL PROTECTED]> writes:
>
>> With 5.4, I dumped -disc1 onto the NFS server, but was prompted for
>> the next disc to get perl package(s?). So I dumped -disc2 into the
>> same place on the NFS server, but sysinstall continued to prompt for
I am having a problem configuring x in free bsd I am having problem disabling
the virtual desktop the desktop is to large for my monitor and the mouse does
not work correctly. I would appreciate the help. I am using the kde desktop
___
freebsd-questions
-- Forwarded Message --
Subject: xconfig
Date: Sunday 03 January 1999 04:26 am
From:
To: freebsd-questions@freebsd.org
I am having a problem configuring x in free bsd I am having problem disabling
the virtual desktop the desktop is to large for my monitor and the mouse does
n
-- Forwarded Message --
Subject: xconfiguration
Date: Sunday 03 January 1999 04:20 am
From:
To: freebsd-questions@freebsd.org
I am having a problem configuring x in free bsd I am having problem disabling
the virtual desktop the desktop is to large for my monitor and the mouse
-- Forwarded Message --
Subject: xconfiguration
Date: Sunday 03 January 1999 04:20 am
From:
To: freebsd-questions@freebsd.org
I am having a problem configuring x in free bsd I am having problem disabling
the virtual desktop the desktop is to large for my monitor and the mouse
I am having a problem configuring x in free bsd I am having problem disabling
the virtual desktop the desktop is to large for my monitor and the mouse does
not work correctly. I would appreciate the help. I am using the kde desktop
___
freebsd-questions
I am having a problem configuring x in free bsd I am having problem disabling
the virtual desktop the desktop is to large for my monitor and the mouse does
not work correctly. I would appreciate the help. I am using the kde desktop
___
freebsd-questions
I am having a problem configuring x in free bsd I am having problem disabling
the virtual desktop the desktop is to large for my monitor and the mouse does
not work correctly. I would appreciate the help. I am using the kde desktop
___
freebsd-questions
>
> It was extracting the distribution into / over ftp and said
>
> /: write failed, filesystem is full
>
> this was after doing a newfs on /. Has anyone run into this problem?
You are going to have to give more information.
What do your file systems look like?
Sure I have had that happen whe
>
> When its runs ask me for login and password and i dont know them.What
> to type for login and password?
Type in your id and password.
If you don't have one, then maybe you are not authorized to be
on that machine.
> And i have on second hard disk windows operating system.
> How to swich b
There are no small parts. Only small actors.Acting is not being
emotional, but being able to express emotion.Achilles absent was
Achilles still!
They are so young and have very beautiful bodies, and now when theyre
18, theyll do all what you want!
V1rgin girls, which are trying this firstly! Th
I have seen this problem on the questions list since 5.0 first can out as
development version. Here 5.4 is now stable release and this problem is
still not fixed. I have been using the same pc to test installing stable
versions from miniinst.iso every version since 3.4 without any problems.
Even 5.
On Sat, May 14, 2005 at 12:54:53PM -0400, Ross Adams Lippert wrote:
> It was extracting the distribution into / over ftp and said
>
> /: write failed, filesystem is full
>
> this was after doing a newfs on /. Has anyone run into this problem?
Only when I made / too small.
Kris
pgpkWFG7WRMo8.
Looking for command line job that will clone a bootable cdrom disk raw
sector by sector to blank cdrom so its also bootable.
Any recommendations on how to do this so?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinf
On Fri, May 13, 2005 at 10:29:37PM +, mail.schatti.ch wrote:
> If you had to choose amongst the available filesystems on 5.4 to contain
> just about 500kB to a MB, which would you use, and with what parameters ?
> Which of these has the lowest administration overhead, the lowest space
> over
On Sat, 14 May 2005 10:28:07 -0700
mojo fms <[EMAIL PROTECTED]> wrote:
> i know you use to be able to change it in /etc/passwd but im kind of
> out of date on how it is done on newer versions of fbsd..
vipw is still valid for that :)
> i cant find
> any real info execpt for adduser in the handb
mojo fms wrote:
> i know you use to be able to change it in /etc/passwd but im kind of
> out of date on how it is done on newer versions of fbsd.. i cant find
> any real info execpt for adduser in the handbook..
>
> I want to change a users shell from sh to bash..
>
> thanks
> ___
i know you use to be able to change it in /etc/passwd but im kind of
out of date on how it is done on newer versions of fbsd.. i cant find
any real info execpt for adduser in the handbook..
I want to change a users shell from sh to bash..
thanks
___
fre
Hello.
I'm using an app that reads big files in small chunks. When using NFS
this takes a huge amount of time, while I see user cpu roughly at 50%
and system CPU again at roughly 50%.
I suspect NFS is sending packets for each read (even 1 bytes) and this
might generate a big overhead.
Is it (or
It was extracting the distribution into / over ftp and said
/: write failed, filesystem is full
this was after doing a newfs on /. Has anyone run into this problem?
I am not subscribed. If I should be tell me. If not, put me
in the cc-line.
-r
___
Hi,
I've had weird behaviour when using 5.3-RELEASE and using KDB (it would
try to boot /kernel, which is 4.X behavior), so I'm asking for anyone's
confirmation on the right kernel options / rc.conf stuff for a debugging
+ panic saving kernel. Is this correct? ->
@ kernel:
makeoptions DEBUG=-g
Anyone have some insight of this problem?
ntpq> associations
ind assID status conf reach auth condition last_event cnt
===
1 60268 8000 yes yes nonereject
2 60269 8000 yes yes nonereject
3 60270 8000 yes yes
Hello all,
How to install a hba device in freebsd 5.4?? This
device is emulex model lp982... The device was found,
but dmesg show me this: "
at device 7.0 (no driver attached)". Which module I
have to load in the kernel??
Thanks
__
It did this to me as well. :\
On Tue, 10 May 2005, Bill Schoolcraft wrote:
Hello Family,
Was installing 5.4 and decided to pick some packages from the
sysinstall menu and found myself being prompted every 2 or 3
packages to take out disk-1 to install disk-2 then take out
disk-1 and install disk-2 e
On Saturday 14 May 2005 07:46, Wayne wrote:
> Robert S wrote:
> >I've just installed the latest 5.4-RELEASE on a PC using a kvm switch.
> > I am completely unable to get the mouse to work.
> >Can anybody help me out of this predicament? I realise that KVM
> >switches can be tricky beasts.
> Hey
I'm having problems with an Atheros PCI card (D-Link G520) when running
FreeBSD 5.4 i386:
1. I've been testing the card with the computers placed within 4 feet
of the wireless router.
2. When I tested the card in a AMD64 socket 939 computer, it worked
fine in Windows XP (rules out hardware i
Robert S wrote:
I've just installed the latest 5.4-RELEASE on a PC using a kvm switch.
I am completely unable to get the mouse to work.
The switch is a no-name one with two ports (in a metal case!!). It's
been fine up until now, though I don't know if I've used FBSD on it.
When I (re)start the mou
On Lö, 2005-05-14, 15:00, fbsd_user skrev:
>
> add security.none to the line for /var/log/messages file to stop
> ipfilter from logging to that file.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Per Berger
> Sent: Saturday, May 14, 2005 8:28 AM
>
On Fri, 13 May 2005, Paul Keyes wrote:
Hi, Thanks for the questions. I am using Sendmail as
an MTA:
*) is your mailserver a public service or a local
one ?
I can't figure out how to configure this. How do I do
it?
I've tried modifying my /etc/mail/hostname.mc and
running:
make
make install
make r
Does the mouse work when not routed through the KVM box?
Robert S wrote:
Spam Received See: http://www.sorbs.net/lookup.shtml?63.251.163.114
X-Scanned-By: mailscanner.tera-byte.com
I've just installed the latest 5.4-RELEASE on a PC using a kvm switch.
I am completely unable to get the mouse to wor
I've just installed the latest 5.4-RELEASE on a PC using a kvm switch.
I am completely unable to get the mouse to work.
The switch is a no-name one with two ports (in a metal case!!). It's
been fine up until now, though I don't know if I've used FBSD on it.
When I (re)start the mouse daemon, wi
Darrel wrote:
> Anyone have some insight of this problem?
>
> ntpq> associations
> ind assID status conf reach auth condition last_event cnt
> ===
> 1 60268 8000 yes yes nonereject
> 2 60269 8000 yes yes nonereject
>
Steve Rikli <[EMAIL PROTECTED]> writes:
> With 5.4, I dumped -disc1 onto the NFS server, but was prompted for
> the next disc to get perl package(s?). So I dumped -disc2 into the
> same place on the NFS server, but sysinstall continued to prompt for
> the next disc on subsequent attempts.
>
> I'
Abu Khaled <[EMAIL PROTECTED]> writes:
> sendmail[1579]: NOQUEUE: SYSERR(root): /etc/mail/sendmail.cf: line
> 279: Unknown address family inet6 in Family=option
Comment out that line and the message will go away. Comment it out in
the .mc file as well, and it won't come back next time you update
Doug Lee <[EMAIL PROTECTED]> writes:
> I'll try this on FreeBSD-Questions first, then FreeBSD-Stable if I
> don't get an answer here; not sure which is best. I run
> FreeBSD-Stable (4.10) with two sound cards: a SoundBlaster AWE64 and
> a Turtle Beach Santa Cruz. I use two because I can't get f
"mail.schatti.ch" <[EMAIL PROTECTED]> writes:
> If you had to choose amongst the available filesystems on 5.4 to
> contain just about 500kB to a MB, which would you use, and with what
> parameters ? Which of these has the lowest administration overhead,
> the lowest space overhead ?
Generally I g
Kenneth W Cochran <[EMAIL PROTECTED]> writes:
> 1. Can I boot MS-DOS from da0 and FreeBSD from da1 using boot
> managers available with FreeBSD? If so, how do I configure
> that? (In other words, replace LILO on da0.)
Sure. How you do it depends on which boot manager you use. With th
add security.none to the line for /var/log/messages file to stop
ipfilter from logging to that file.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Per Berger
Sent: Saturday, May 14, 2005 8:28 AM
To: FreeBSD questions
Subject: ipfilter and logging...
Hi
Hi!
So I've installed ipfilter and ipnat with help from the handbook. It
works great so now my box is connected to my ADSL connection.
But... (there is always a but...)
I am confused regarding logging. The handbook says that I can add
"security.*" in syslog.conf and specify a logfile to log the
On Saturday 14 May 2005 05:12, William Bloom wrote:
> I've had occasion to want to be able to load the ucom driver while
> customizing how it attaches devices. Especially, I have the Qualcomm 5220
> EVDO modem card in mind, which can function as a USB serial device but does
> not make itself known
Warren Block wrote:
On Thu, 12 May 2005, Duane Winner wrote:
Does anybody have recommendations for a good solution to alert me
while I am not at work if something goes wrong with my
infrastucture/network/servers?
In other words, if I am at home, I need to be alerted if one of my
FreeBSD servers
Ed Stover wrote:
[ ... ]
I know some people that run big brother and are satisfied by it.
http://www.bb4.org/
I would second this recommendation. Big brother is relatively simple to
configure, although it is by design more of a monitoring tool, and is less
active about responding to changes, alt
kylie pye wrote:
i need help with my laptop its a toshiba te2100 and the screens black
even when i turn it on and have the battery cord being charged what
has made this happen? is there anything i can do to fix it?
_
REALESTATE: big
i need help with my laptop its a toshiba te2100 and the screens black even
when i turn it on and have the battery cord being charged what has made this
happen? is there anything i can do to fix it?
_
REALESTATE: biggest buy/rent/sha
I'm not sure if the problem I am having is with the kernel modules I am
using (I've tried with two different ones) or with the ndis module
itself or what. I am running FreeBSD 5.4 amd64 on an Asus A8V-E Deluxe
motherboard, AMD 64 3000+, 512MB RAM. The ndis drivers I am using are
for a Marvell 8
On May 14 at 09:19, Daniel Gerzo responded helpfully:
Limiting closed port RST response from 1629 to 200 packets per second
your kernel is limitting number of icmp ping requests to 200, someone
is possibly trying to ping -f you. You can also decrease/increase this
limit with net.inet.icmp.icmplim
Any word on a driver for this chipset? It doesn't seem to be detected at
all. I have read here: http://sources.zabbadoz.net/freebsd/if_sk.html
that it's not yet supported by the "sk" driver, however other chips of a
similar type are supported. Is there any word on if it's supported
anywhere by
Anyone have some insight of this problem?
ntpq> associations
ind assID status conf reach auth condition last_event cnt
===
1 60268 8000 yes yes nonereject
2 60269 8000 yes yes nonereject
3 60270 8000 yes yes n
משעמם לכם?
נמאס לכם לשבת כל היום מול המחשב?
בואו לצחוק קצת באתר הצחוק של ישראל!
http://www.neto-jokes.net
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMA
On Fri, May 13, 2005 at 06:27:54PM -0400, [EMAIL PROTECTED] wrote:
> Hello All,
>
> Is there are better driver for my video card than the
> standard, generic vga0 driver?
> My video card is a Diamond Viper v550 vidoe card which uses the nVidia
> Riva TNT chip. The card uses the AGP interface an
On Sat, May 14, 2005 at 09:14:20AM +0200, Colin J. Raven wrote:
> Hi all!
> I occasionally get these in my daily security run output (which is
> worrying in itself)
>
> Limiting closed port RST response from 1629 to 200 packets per second
>
> the number of these can range from one or two, to som
Hello Colin,
Saturday, May 14, 2005, 9:14:20 AM, you thoughtfully wrote the following:
> Hi all!
> I occasionally get these in my daily security run output (which is
> worrying in itself)
> Limiting closed port RST response from 1629 to 200 packets per second
> the number of these can range fr
Hi all!
I occasionally get these in my daily security run output (which is
worrying in itself)
Limiting closed port RST response from 1629 to 200 packets per second
the number of these can range from one or two, to sometimes 25 - 30
although the latter case is rarer. Usually there's about six or
On Thursday 12 May 2005 06:55 am, Bill Schoolcraft wrote:
> Hello Family,
>
> Well, it's been two days now of watching both from work and from
> home the building of "/usr/ports/x11/kde3" and I started this
> thinking it would be an hour or two adventure for after about 19
> "inserting/reinserting"
On Fri, 13 May 2005 20:37:37 -0700, Joshua Lewis
<[EMAIL PROTECTED]> wrote:
> Is there a hidden file attribute in FreeBSD as there is in Windows?
No, there isn't.
> If so how do I unset it?
>
> Or allow certain users to be able to view the files without unsetting
> it.
If by "hidden" files yo
Warren Block wrote:
> On Thu, 12 May 2005, Duane Winner wrote:
>
>> Does anybody have recommendations for a good solution to alert me
>> while I am not at work if something goes wrong with my
>> infrastucture/network/servers?
>> In other words, if I am at home, I need to be alerted if one of my
>>
88 matches
Mail list logo
