Hi,
I have installed FreeBSD 5.4 (from CD) onto a ThinkPad A21. I also have
Win2Kpro on this laptop. FreeBSD is installed at about the 7G mark on the
harddrive.
I had 4.3 installed previously, and thought I would just start over. Howver,
when the laptop boots, I get the f1 DOS f2 Freebsd
I was reading on wikipedia about RAIDs trying to pass the time and I
was thinking why not have RAID 5+5 or 5+5+5 levels, sure you waste
2/3th's of your space but wouldn't this be a killer setup for a
directory server where fast reads are of the utmost importance?
Would you add up the transfer
On Sat, Jul 16, 2005 at 01:51:32AM +0200, Ksenia Marasanova wrote:
Greetings,
I have FreeBSD box that runs Apache1 from ports. Now I'd like to
install Apache2 from ports (and run it on different IP), without
overwriting httpd binary of Apache1. What would be the correct,
port-friendly :)
Hi all,
I need to upgrade some applications with many dependencies on an older
4.9 system. I was thinking to start with ports tree upgrade but when
I try to run cvsup I get connection refused messages from all cvsup
servers I tried, meaning that there's no a fresh port tree for version
4.9. So,
Hi, I can't get flash movies to play in freebsd 5.4 amd64. The movies
play too fast. I've tried the flashplugin-mozilla plugin in the ports.
I also tried another one. Is there any way to solution this?
Thanks in advance.
___
Hi everybody, I'm using freebsd on a 56k connection, so you'll
probably imagine how frustrating is to spend hours and hours
downloading a simple program (plus its dozens of dependecies). I
wanted to know if there is any way to get a list and download the
programs from another computer with a
On Sat, Jul 16, 2005 at 01:52:33PM +0200, Emil Khatib wrote:
Hi everybody, I'm using freebsd on a 56k connection, so you'll
probably imagine how frustrating is to spend hours and hours
downloading a simple program (plus its dozens of dependecies). I
wanted to know if there is any way to get a
I read the pages about supported hardware. It dazzles me.
I want to buy a new motherboard. I will run FreeBSD-5.4 (and later on v6.x) on
it. No fancy stuff like raid. Just plenty of memory and good performance and
fbsd support tothe fullest(!).
From what I understand there are still some
On Jul 16, 2005, at 1:53 AM, e-mail for freebsd wrote:
Hi,
I have installed FreeBSD 5.4 (from CD) onto a ThinkPad A21. I also
have
Win2Kpro on this laptop. FreeBSD is installed at about the 7G mark
on the
harddrive.
I had 4.3 installed previously, and thought I would just start
over.
On Sat, Jul 16, 2005 at 03:17:01PM +0200, dick hoogendijk wrote:
snip
From what I understand there are still some problems with AMD64
boards. Still, 64bits is the future.. so is it better to wait a while,
_or_ are there *good* supported motherboards for amd64?
Avoid boards with NForce
Please do not top-post.
Paweł Madej [EMAIL PROTECTED] writes:
FreeBSD 5.3 from ISO / standard kernel world
ports tree: current
AMD Sempron 3000+ / Gigabyte K8NS / 1GB RAM
Okay, then just build the port, but don't try to install it.
See if the missing library is present.
[find
Emil Khatib [EMAIL PROTECTED] writes:
Hi everybody, I'm using freebsd on a 56k connection, so you'll
probably imagine how frustrating is to spend hours and hours
downloading a simple program (plus its dozens of dependecies). I
wanted to know if there is any way to get a list and download the
Hello,
I've noted a strange entry in /var/log/messages on machine here that I'm
hoping someone might be able to shed some light on, please. Here is what I
found:
su: _secure_path: /nonexistent/.login_conf is not
owned by uid 65534
There are two (2) entries at exactly 04:15 this morning,
Nikolas Britton wrote:
I was reading on wikipedia about RAIDs trying to pass the time and I
was thinking why not have RAID 5+5 or 5+5+5 levels, sure you waste
2/3th's of your space but wouldn't this be a killer setup for a
directory server where fast reads are of the utmost importance?
On Sat, 2005-07-16 at 01:51 +0200, Ksenia Marasanova wrote:
Greetings,
I have FreeBSD box that runs Apache1 from ports. Now I'd like to
install Apache2 from ports (and run it on different IP), without
overwriting httpd binary of Apache1. What would be the correct,
port-friendly :) way to do
Cezar Fistik [EMAIL PROTECTED] writes:
I need to upgrade some applications with many dependencies on an older
4.9 system. I was thinking to start with ports tree upgrade but when
I try to run cvsup I get connection refused messages from all cvsup
servers I tried, meaning that there's no a
I have as similar setup on my Toshiba 8100 notebook (XP Pro on ad0,
FreeBSD 5.4-STABLE and an NTFS partition on ad1); if you install XP first
and then FreeBSD second the FreeBSD boot manager works as well as anything
I've used to manage the process. The installation is also automatic, as
long
How aout asking this on the spamassassin users email list?
--
Martin
On 7/12/05, Sean Murphy [EMAIL PROTECTED] wrote:
I've installed Spam Assassin and MIMEDefang with Sendmail however I
would like Spam Assassin to tell sendmail to Reject Spam on the
connection. Instead of accepting the spam
Hi,
I've managed to install FreeBSD 5 on a RAID-10 after my weird problem of
random letters/numbers scrolling on the screen upon a CD boot (actually
installed 4.10 from CD, cvsupped to 5.4, it worked - seems to be
something related to the CD boot loader..).
Wanting to have something to
Hi,
Can anyone tell me how to boot in 1024x768x16 (vidcontrol MODE_279) or at
least have all the ttyv at that resolution after boot. I have seen the sc
flag 0x0080 to set it at 800x600 but I would want 1024 since my lcd native
resolution is 1024x768 and in 800x600 the refresh rate causes
On Jul 16, 2005, at 10:45 AM, M. L. wrote:
Hi,
I've managed to install FreeBSD 5 on a RAID-10 after my weird
problem of random letters/numbers scrolling on the screen upon a CD
boot (actually installed 4.10 from CD, cvsupped to 5.4, it worked -
seems to be something related to the CD
On 2005-07-16 13:17, Nicolas Blais [EMAIL PROTECTED] wrote:
Hi,
Can anyone tell me how to boot in 1024x768x16 (vidcontrol MODE_279) or
at least have all the ttyv at that resolution after boot. I have seen
the sc flag 0x0080 to set it at 800x600 but I would want 1024 since my
lcd native
Is anyone else getting this error in FreeBSD 5.4 with Nvidia drivers. I use
4.3 with no problem. Is you have seen or had this problem please just send me
in the right direction.
Thanks much.
___
freebsd-questions@freebsd.org mailing list
Hello Lowell,
Saturday, July 16, 2005, 7:05:55 PM, you wrote:
Cezar Fistik [EMAIL PROTECTED] writes:
I need to upgrade some applications with many dependencies on an older
4.9 system. I was thinking to start with ports tree upgrade but when
I try to run cvsup I get connection refused
I'm confused about the output from top in 5.4-RELEASE-p4. The gkrellm
CPU monitor is telling me I'm running at 95% load while updating the
portsdb, but top tells me everything is taking 0.0% of the CPU.
It may have something to do with the CPU HT being enabled, but I don't
know. The system has
On Sat, 2005-07-16 at 13:54 -0400, Louis LeBlanc wrote:
I'm confused about the output from top in 5.4-RELEASE-p4. The gkrellm
CPU monitor is telling me I'm running at 95% load while updating the
portsdb, but top tells me everything is taking 0.0% of the CPU.
It may have something to do with
Gunter Wambaugh wrote:
On Jul 16, 2005, at 1:53 AM, e-mail for freebsd wrote:
Hi,
I have installed FreeBSD 5.4 (from CD) onto a ThinkPad A21. I also have
Win2Kpro on this laptop. FreeBSD is installed at about the 7G mark
on the
harddrive.
I had 4.3 installed previously, and thought I
I am attempting to use the following combination of commands.
$ export DISPLAY=:0.0
$ xhost +local:
$ boinc -allow_remote_gui_rpc
$ boincmgr
After the second command, I receive this error message:
xhost: unable to open display 0.0
I am not sure what I am doing wrong, or if
On Sat, Jul 16, 2005 at 01:54:56PM -0400, Louis LeBlanc wrote:
I'm confused about the output from top in 5.4-RELEASE-p4. The gkrellm
CPU monitor is telling me I'm running at 95% load while updating the
portsdb, but top tells me everything is taking 0.0% of the CPU.
It may have something to
Hi,
I can't post exact messages now, but dmesg detects an asr Adaptec
Caching RAID, and the only disk detected (the RAID-10) is da0. As I
mentioned, raidutil (from the asr utils package) keeps saying
/dev/rdpti17 doesn't exist, and if I symlink asr0 - rdpti17, the next
time I run raidutil,
In the last episode (Jul 16), Louis LeBlanc said:
I'm confused about the output from top in 5.4-RELEASE-p4. The
gkrellm CPU monitor is telling me I'm running at 95% load while
updating the portsdb, but top tells me everything is taking 0.0% of
the CPU.
portsdb -U ends up running a lot of
Igor Robul wrote:
Brian John wrote:
Hello,
I can't use cvsup for some reason. I just tried upgrading from 5.3 to
5.4. When I try to use cvsup, it says this:
su-2.05b# cvsup
/libexec/ld-elf.so.1: Shared object libXaw.so.8 not found, required by
cvsup
If you dont have X11 on this machine,
Brian John wrote:
Igor Robul wrote:
Brian John wrote:
Hello,
I can't use cvsup for some reason. I just tried upgrading from 5.3 to
5.4. When I try to use cvsup, it says this:
su-2.05b# cvsup
/libexec/ld-elf.so.1: Shared object libXaw.so.8 not found,
required by
cvsup
If you dont have
On 7/16/05, Chuck Swiger [EMAIL PROTECTED] wrote:
Nikolas Britton wrote:
I was reading on wikipedia about RAIDs trying to pass the time and I
was thinking why not have RAID 5+5 or 5+5+5 levels, sure you waste
2/3th's of your space but wouldn't this be a killer setup for a
directory server
On Saturday 16 July 2005 12:05 pm, Brian John wrote:
Igor Robul wrote:
Brian John wrote:
Hello,
I can't use cvsup for some reason. I just tried upgrading from
5.3 to 5.4. When I try to use cvsup, it says this:
su-2.05b# cvsup
/libexec/ld-elf.so.1: Shared object libXaw.so.8 not
Is it true that jumbo frames are only useable with VLANs or LANs that
are 100% GigE?
The current LAN has a 16port 100Base-TX switch with a mix of 10/100
devices connected to it. 4 of the machines connected to the switch
have built-in GigE support and their usage profile can take full
advantage of
On Jul 16, 2005, at 1:06 PM, M. L. wrote:
Hi,
I can't post exact messages now, but dmesg detects an asr Adaptec
Caching RAID, and the only disk detected (the RAID-10) is da0. As
I mentioned, raidutil (from the asr utils package) keeps saying /
dev/rdpti17 doesn't exist, and if I symlink
I've installed Spam Assassin and MIMEDefang with Sendmail however I
would like Spam Assassin to tell sendmail to Reject Spam on the
connection.
1) SpamAssassin cannot detect spam until it has received and analyzed
the FULL message, so rejecting on connection is not possible.
2) that is
I have a couple of issues that I'm somewhat concerned about based on
some netstat output results.
I have a few boxes running 4.11-STABLE that provide this;
FreeBSD 4.11-STABLE #0: Wed May 4 09:49:52 PDT 2005 (i386)
# netstat -m
netstat: sysctl: retrieving mbstat: Cannot allocate memory
On Jul 16, 2005, at 7:17 AM, dick hoogendijk wrote:
I read the pages about supported hardware. It dazzles me.
I want to buy a new motherboard. I will run FreeBSD-5.4 (and later
on v6.x) on it. No fancy stuff like raid. Just plenty of memory and
good performance and fbsd support tothe
On Jul 16, 2005, at 6:10 PM, Olivier Nicole wrote:
I've installed Spam Assassin and MIMEDefang with Sendmail however I
would like Spam Assassin to tell sendmail to Reject Spam on the
connection.
1) SpamAssassin cannot detect spam until it has received and analyzed
the FULL message, so
I have a couple of issues that I'm somewhat concerned about based on
some netstat output results.
I have a few boxes running 4.11-STABLE that provide this;
FreeBSD 4.11-STABLE #0: Wed May 4 09:49:52 PDT 2005 (i386)
# netstat -m
netstat: sysctl: retrieving mbstat: Cannot allocate memory
At 02:50 PM 7/16/2005, Nikolas Britton wrote:
Is it true that jumbo frames are only useable with VLANs or LANs that
are 100% GigE?
There's a bunch of good info here: http://sd.wareonearth.com/~phil/net/jumbo/
-Glenn
___
On 2005-07-15 13:27, George Ruch [EMAIL PROTECTED] wrote:
I'm working on a 5.4-REL test installation on my main desktop machine.
Hardware specifics:
MSI MS-6378 MB
AMD Athalon 1800 @ 1536
256 MB memory
2 x Maxtor 30 GB drives
Zip 100 ATA
DVD-RW
This
I'm looking for a reccomendation on the best software to publish RIP routes
for IPSpace I own.
I'm aware I'd have to get approval from my bordering routers to allow me to
publish routes for public space, but I am just looking to publish updated
routes (dynamically) via RIP or BGP from a FreeBSD
Olga Zenkova [EMAIL PROTECTED] writes:
mount -t msdos /dev/fd0 /mnt
and get /dev/fd0: No such file or directory
Maybe it's write-protectd. I've seen strange things happen
with those disks. I didn't get that error when I tried
just now, but now I can't unmount the thing.
Kent Stewart [EMAIL PROTECTED] wrote:
On Saturday 16 July 2005 12:05 pm, Brian John wrote:
Igor Robul wrote:
Brian John wrote:
Hello,
I can't use cvsup for some reason. I just tried upgrading from
5.3 to 5.4. When I try to use cvsup, it says this:
su-2.05b# cvsup
The du command is your friend. Have a look at 'man du'
Maybe something like: du -d2 /var
Cheers,
Paul
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Stephan Weaver
Sent: Friday, 15 July 2005 10:25 PM
To: [EMAIL PROTECTED];
On 7/16/05, Mark [EMAIL PROTECTED] wrote:
I'm looking for a reccomendation on the best software to publish RIP
routes
for IPSpace I own.
I'm aware I'd have to get approval from my bordering routers to allow me
to
publish routes for public space, but I am just looking to publish updated
49 matches
Mail list logo
