-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
This is due to a mis-configured firewall. If you are using IPFW there are
many tutorials out there that tell you to do the wrong thing. And almost all
of them contradict each other. Below is a basic script that only allows in
and out SSH sessions
Hi!
I have instaled pppoed, and work well. But i want to know how is
possibil to not permit simultaneously logins? What parameter need te
setup in ppp.conf?
___
freebsd-questions@freebsd.org mailing list
On Sun, 21 Aug 2005 18:33:32 +0200
Fabian Keil [EMAIL PROTECTED] wrote:
dick hoogendijk [EMAIL PROTECTED] wrote:
I have a directory full with mp3 files and want to burn them to CD with
burncd. Is there an easy way to do this in stead of writing down all
filenames to do a burncd opt data
Ilari Laitinen wrote:
On Fri, Aug 19, 2005 at 04:22:20PM +0100, Alex Zbyslaw wrote:
This pretty much cleared it up. Now that I read the manual page again,
enlightened, it seems quite easy to follow. Nice.
Using the algorithm above I get the following:
SequenceDumps needed
Thanks to those who replied to this thread!
Regards,
Soo-Hyun
On 8/22/05, Garrett Cooper [EMAIL PROTECTED] wrote:
On Aug 21, 2005, at 6:10 PM, Jerahmy Pocott wrote:
On 22/08/2005, at 12:17 AM, Soo-Hyun Choi wrote:
Hi,
I'm trying to install FreeBSD on my system which has two
I have just isntalled mysql-administrator on a FreeBSD 5.4-STABLE machine and
for the life of me cant find the file/command to execute the program .. does
anyone know where i should be looking or the command?
TIA
--
Yours Sincerely
Shinjii
http://www.shinji.nq.nu
Hi!
I have a question regarding support in FreeBSD on-board SCSI LSI 53c1030
controller.
In the FreeBSD/i386 4.11 Release Hardware Notes I found the only one string:
LSI Logic Fusion/MP architecture Fiber Channel controllers (mpt driver)
*
LSI FC909, FC929
*
LSI 53c1020,
On Mon, 22 Aug 2005 19:59:28 +1000
Warren [EMAIL PROTECTED] wrote:
I have just isntalled mysql-administrator on a FreeBSD 5.4-STABLE machine and
for the life of me cant find the file/command to execute the program .. does
anyone know where i should be looking or the command?
if you
On Mon, Aug 22, 2005 at 01:08:07PM +0300, Sergey Kirichok wrote:
Hi!
I have a question regarding support in FreeBSD on-board SCSI LSI 53c1030
controller.
In the FreeBSD/i386 4.11 Release Hardware Notes I found the only one string:
LSI Logic Fusion/MP architecture Fiber Channel
Louis LeBlanc wrote:
Does it tell you why XP requires any user wishing to print to a
network printer must have administrator privileges?
It doesnt
___
freebsd-questions@freebsd.org mailing list
* Eric Murphy [2005-08-21 13:22 -0500]
Are you usre mixer will do all the channels? I dont see anything in it
that would allow me to change speaker volumes?
Looks like you're right! I only have the usual two channels, myself.
___
Way back on Wed Jun 2 07:13:23 PDT 2004 on freebsd-questions you wrote:
I have a production mail server that runs imaps. Sometimes when I reboot,
tcp port 993 (imaps according to /etc/services) is taken by either
rpc.statd or (currently) mountd before inetd starts, which causes imaps to
Can Clipper and Foxbase Applications run on BSD? And what are the
necessary protocols or applications needed to run the said types of
applications
Thanks,
Michael Louie Loria
Start your day with Yahoo! - make it your home
Hello together,
In the future we will use an Exchange 2003 server because
it provides groupware functionality for the clients (in most
of the cases our co-workers are already using OutLook). I'll
stay with FreeBSD or Linux and can read easy the mail folders
with IMAP, using 'mutt' as MUA. Is
Hello Matthias -
Check out mail/evolution and mail/ximian-connector. It's a nice tool
that has almost all of the functionality of Outlook but runs natively on
FreeBSD or Linux.
Ben
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matthias Apitz
Sent:
Am Montag, 22. August 2005 14:13 CEST schrieb Matthias Apitz:
Hello together,
In the future we will use an Exchange 2003 server because
it provides groupware functionality for the clients (in most
My condolences. I had years of awful experiences with Exchange 5 and 5.5,
but the absolutely
On 8/22/05, Michael Louie Loria [EMAIL PROTECTED] wrote:
Can Clipper and Foxbase Applications run on BSD? And what are the
necessary protocols or applications needed to run the said types of
applications
Well, there are at least:
- CLIP, http://www.itk.ru/english/clip/clipchangelog.shtml
-
We upgraded from 4.9 to 5.4 and the 'top -I' and load average seem to
behave slightly different. 'top -I' in 5.4 stays empty most of the time
with processes flashing in and out from time to time. In 4.9 the
processes stayed there until they are done. Load average on another hand
does not seem
--- Jim Durham [EMAIL PROTECTED] wrote:
On Sunday 21 August 2005 05:05 pm, Danial Thom
wrote:
--- Martin Hepworth [EMAIL PROTECTED] wrote:
Therere's things you cvan do with
reasonable
low end managed switches
for bandwidth thottling etc. BTW I fing
symantec 'no the best' and
On 8/22/05, Michael Louie Loria [EMAIL PROTECTED] wrote:
Dmitry Mityugov wrote:
On 8/22/05, Michael Louie Loria [EMAIL PROTECTED] wrote:
Can Clipper and Foxbase Applications run on BSD? And what are the
necessary protocols or applications needed to run the said types of
applications
On 08/21/05 10:44 PM, Eric Murphy sat at the `puter and typed:
Okie dokie...
First off the install went flawlessly so i dont think it was a bad install or
anything...
eed:$ ldd /usr/X11R6/bin/glxgears
/usr/X11R6/bin/glxgears:
libGL.so.1 = /usr/X11R6/lib/libGL.so.1
# Louis LeBlanc:
[ libm.so.3 not available on 6.0 ]
It might be that FreeBSD 6.0, or just the installation you have
doesn't have that particular file present. Check on the
freebsd-current mailing list to see if this is normal.
It is normal, just a version bump from libm.so.3 to libm.so.4.
# [EMAIL PROTECTED]:
We upgraded from 4.9 to 5.4 and the 'top -I' and load average seem to
behave slightly different. 'top -I' in 5.4 stays empty most of the time
with processes flashing in and out from time to time.
Well, I'd actually expect them to, as -I filters out any idle
process.
Hi, i need help to setup my freebsd as a NAT server, i
cannot ping the external gateway from the client side
of my FreeBSD server but i can ping the FreeBSD
server. I followed all the instructions in the hand
book but i cannot get the client side to connect to
any www. freebsd server can ping the
Dan,
In the last episode (Aug 18), Brian J. McGovern said:
I'm in the process of trying to set up a Solaris jumpstart
server in a lab, and I decided for chuckles to do it with FreeBSD.
The problem I'm running in to is that apparently, the Sun bootparamd
allows you to pass
On Mon, Aug 22, 2005 at 06:28:41AM -0700, gary masigon wrote:
Hi, i need help to setup my freebsd as a NAT server, i
cannot ping the external gateway from the client side
of my FreeBSD server but i can ping the FreeBSD
server. I followed all the instructions in the hand
book but i cannot get
We upgraded from 4.9 to 5.4 and the 'top -I' and load average seem to
behave slightly different. 'top -I' in 5.4 stays empty most of the time
with processes flashing in and out from time to time.
Well, I'd actually expect them to, as -I filters out any idle
process. Justed tested on my
Hello.
Since I upgrade my box from FreeBSD-5.4 to 6.0 it seems that I run into
some really strange Firefox/Mozilla behaviour. The phenomenon is
described really quickly: I can not save some configurations, like using
which type of SSL/TSL, block popups etc. I can mark the boxes, but
whenever
On 08/22/05 03:43 PM, Mario Hoerich sat at the `puter and typed:
# Louis LeBlanc:
[ libm.so.3 not available on 6.0 ]
It might be that FreeBSD 6.0, or just the installation you have
doesn't have that particular file present. Check on the
freebsd-current mailing list to see if this is
Hello :
I want to install FreeBSD 5.4 on a MSI K8T MASTER 2, but the loader freezes
immediatly after it starts.
Must I configure the BIOS ?, which options ??
Can you give me some guidelines to boot FreeBSD 5.4 on this machine ??
Thanks in Advance.
(I am not subscribed to this
O. Hartmann (ohartman) writes:
I completely recompiled everything, I deinstalled both Mozilla and
Firefox, but it is always the same behaviour. Can someone help or report
about similar or the same problem?
One idea is that this has to do with some access rights of the user's
profile
O. Hartmann wrote:
Hello.
Since I upgrade my box from FreeBSD-5.4 to 6.0 it seems that I run
into some really strange Firefox/Mozilla behaviour. The phenomenon is
described really quickly: I can not save some configurations, like
using which type of SSL/TSL, block popups etc. I can mark the
hello, i have a network printer and i need to set up
in order to print, what can i do?
__
Renovamos el Correo Yahoo!
Nuevos servicios, más seguridad
http://correo.yahoo.es
___
Please, how can i install mod_php5 with-gd option?
I tried to modify the Makefile with the line :
LIB_DEPENDS+= gd.2:${PORTSDIR}/graphics/gd
but doesn't work
On Mon, Aug 22, 2005 at 10:25:23AM -0500, Victor Leo Kallen Soto wrote:
Hello :
I want to install FreeBSD 5.4 on a MSI K8T MASTER 2, but the loader freezes
immediatly after it starts.
When you get to the boot screen, try booting without ACPI.
Roland.
--
R.F.Smith
On Mon, 2005-08-22 at 18:25 +0200, Roldán wrote:
hello, i have a network printer and i need to set up
in order to print, what can i do?
You could start with reading this:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/printing.html
Andreas
--
GnuPG key : 0xD25FCC81 |
On Mon, 2005-08-22 at 19:28 +0300, Carstea Catalin wrote:
Please, how can i install mod_php5 with-gd option?
I tried to modify the Makefile with the line :
LIB_DEPENDS+=
On Mon, Aug 22, 2005 at 06:25:41PM +0200, Roldn wrote:
hello, i have a network printer and i need to set up
in order to print, what can i do?
That depends on what kind of printer it is, and what kind of printer
spooler and filters you want to use. See chapter 9 of the FreeBSD
Handbook for
Hi (i'm running i386 FreeBSD 5.4 release)
I'm having troubles in getting console to work using 8859-15 (or even
8859-1), because i'm portuguese and i need some extra chars, like(i
hope these show up well):
ç Ç º ª â ã á è « » € '
in case anyone doesn't remember:
I have a 250G disk. First partition is WinXp; second is a FAT32 part
and the third is FreeBSD-5.4
When I run Powerquest Partition Manager it comes up with an error 116
about a dismatch of CHS/LBA setting on the disk and proposes to set
things right. Yeah right...
The first time I let it do so
I have a 250G disk. First partition is WinXp; second is a FAT32 part
and the third is FreeBSD-5.4
When I run Powerquest Partition Manager it comes up with an error 116
about a dismatch of CHS/LBA setting on the disk and proposes to set
things right. Yeah right...
The first time I let
During the install Of FreeBSD 5.4 you come to the configuration of
your NICs (I have 2 in my tower). I configured them with the basics
(Ip, gteway, domain, exe...). I DID NOT install nfs server or client,
dhcp,routing, or remote access.
Onec the install was compleate I compiled firefox and the X
Date: Mon, 22 Aug 2005 07:17:30 -0500 (EST)
From: Mail Delivery Subsystem MAILER-DAEMON
To: postmaster
Subject: Postmaster notify: see transcript for details
Parts/Attachments:
1 Shown 11 lines Text
2 Shown274 bytes Message, Delivery Status
3 Shown6.6 KB
jason wrote:
O. Hartmann wrote:
Hello.
Since I upgrade my box from FreeBSD-5.4 to 6.0 it seems that I run
into some really strange Firefox/Mozilla behaviour. The phenomenon is
described really quickly: I can not save some configurations, like
using which type of SSL/TSL, block popups etc. I
Dick Hoogendijk [EMAIL PROTECTED] writes:
So let me ask you:
If I delete the XP partition (i.e. with the fbsd fdisk progam) and write
the partition table back to disk, will this ruin my third fbsd part?
If you want to be real careful, save off a copy of the MBR (to
floppy?) with something
Hello.
I'm running rdesktop 1.4.1 on FreeBSD 5.4-RELEASE-p6
with Xorg 6.8.2 to connect to remote windows NT terminal.
Periodically it stops working with the following message:
X Error of failed request: BadAtom (invalid Atom parameter)
Major opcode of failed request: 18 (X_ChangeProperty)
Hi all,
I'm trying to clean a disc before selling them:
dd if=/dev/zero of=/dev/da0
Do I make something wrong because the transfer rate is only 60932
bytes/sec??? These are 60 kbytes/sec, slower than my internet connection!!!
:(
I tried to increase the block size, with bs=32768 I get 3416071
On 8/23/05, Sebastian Pahlke [EMAIL PROTECTED] wrote:
Hi all,
I'm trying to clean a disc before selling them:
dd if=/dev/zero of=/dev/da0
Do I make something wrong because the transfer rate is only 60932
bytes/sec??? These are 60 kbytes/sec, slower than my internet connection!!!
:(
(sorry if this message i duplicated... but i didn't receive it through
the mailing list)
Hi (i'm running i386 FreeBSD 5.4 release)
I'm having troubles in getting console to work using 8859-15 (or even
8859-1), because i'm portuguese and i need some extra chars, like(i
hope these show up well):
Am Montag, 22. August 2005 22:13 CEST schrieb Sebastian Pahlke:
Hi all,
I'm trying to clean a disc before selling them:
dd if=/dev/zero of=/dev/da0
Do I make something wrong because the transfer rate is only 60932
bytes/sec??? These are 60 kbytes/sec, slower than my internet
connection!!!
vladone [EMAIL PROTECTED] writes:
I have setup an pppoe concentrator on freebsd 5.4 machine. Now i see,
on testing with ifconfig only 5 tun interface.
This mean that only 5 users can connect at time, or, if is needed then
are created more tun interface?
If no, how i can create more tun
I wasn't able to find anything about this on Google unfortunately. Hoping
that if this thread can determine the problem, others will be able to find
it.
We ordered a whole batch of servers which have the IPMI 2.0 board (I am
pretty sure). When they first come online they seem to have the MAC
On Mon, 22 Aug 2005 15:28:38 +0400 Igor Robul [EMAIL PROTECTED] wrote:
Louis LeBlanc wrote:
Does it tell you why XP requires any user wishing to print to a
network printer must have administrator privileges?
It doesnt
** Reply Separator **
Monday, August 22, 2005
Hi !!
Sorry if this question was made previously. I'm installing like ten freebsd
terminals in two weeks. But i don't know when freebsd 6.0 will become
stable. I've seen the schedule, it says agoust 18, but it's not ready yet.
Does anybody know if there was a reschedule ?
Thanks !!
Hi !!
Sorry if this question was made previously. I'm installing like ten freebsd
terminals in two weeks. But i don't know when freebsd 6.0 will become
stable. I've seen the schedule, it says agoust 18, but it's not ready yet.
Does anybody know if there was a reschedule ?
I notice today
Am Montag, 22. August 2005 23:09 CEST schrieb Jerry McAllister:
Hi !!
Sorry if this question was made previously. I'm installing like ten
freebsd terminals in two weeks. But i don't know when freebsd 6.0 will
become stable. I've seen the schedule, it says agoust 18, but it's not
ready
On 08/22/05 04:56 PM, Gerard Seibert sat at the `puter and typed:
On Mon, 22 Aug 2005 15:28:38 +0400 Igor Robul [EMAIL PROTECTED] wrote:
Louis LeBlanc wrote:
Does it tell you why XP requires any user wishing to print to a
network printer must have administrator privileges?
It
Emanuel Strobl wrote:
What's TBA?
But I'd like to advise Pablo to go with 6.0-RC, or even with BETA3 if
neccessarry, tracking a stable or RELEASE branch in FreeBSD is very easy
and worth the building mechanisms, especially if you have 10 similar
machines to maintain. You have a very
--- dpk [EMAIL PROTECTED] wrote:
I wasn't able to find anything about this on
Google unfortunately. Hoping
that if this thread can determine the problem,
others will be able to find
it.
We ordered a whole batch of servers which have
the IPMI 2.0 board (I am
pretty sure). When they
While I try to close (and save, if need be) any vi windows that I
have open, I still run into cases where I get mail from root that I have a
killed vi process and can recover the file by typing
vi -r file-name
unfortunately most of the time I get a core
What are the symptoms that you need administrator privileges? The default
security scheme, even with the SP2 behemoth installed, require an
administrator or power user to install the printer, but a user can print to
it. Is this just a postfix or pdl printer installed with a local tcp/ip
port or
On Mon, 22 Aug 2005, Danial Thom wrote:
A more important question is: why did you order
a whole bunch of servers without testing one
first? A curious approach to computing.
DT
We weren't made aware that the newer servers were coming with a later rev
board, and a customer came along asking
On 8/22/05, Joshua Weaver [EMAIL PROTECTED] wrote:
What are the symptoms that you need administrator privileges? The default
security scheme, even with the SP2 behemoth installed, require an
administrator or power user to install the printer, but a user can print to
it. Is this just a postfix
| During the install Of FreeBSD 5.4 you come to the configuration of
| your NICs (I have 2 in my tower). I configured them with the basics
| (Ip, gteway, domain, exe...). I DID NOT install nfs server or client,
| dhcp,routing, or remote access.
| Onec the install was compleate I compiled firefox
I'm working on a box that has a (legal) wireless connection to a business
across the street. After installing isc-dhcp to handle their inside network
I'm getting a lot of the following messages:
dhcpd: DHCPDISCOVER from 00:0e:35:b9:02:a4 via ndis0: network 192.168.2/24: no
free leases.
Is the
Am Montag, 22. August 2005 23:09 CEST schrieb Jerry McAllister:
Hi !!
Sorry if this question was made previously. I'm installing like ten
freebsd terminals in two weeks. But i don't know when freebsd 6.0 will
become stable. I've seen the schedule, it says agoust 18, but it's not
On Mon, Aug 22, 2005 at 04:36:11PM +0200, [EMAIL PROTECTED] wrote:
We upgraded from 4.9 to 5.4 and the 'top -I' and load average seem to
behave slightly different. 'top -I' in 5.4 stays empty most of the time
with processes flashing in and out from time to time.
Well, I'd actually expect
On Mon, Aug 22, 2005 at 11:39:30PM +0200, K?vesd?n G?bor wrote:
Emanuel Strobl wrote:
What's TBA?
But I'd like to advise Pablo to go with 6.0-RC, or even with BETA3 if
neccessarry, tracking a stable or RELEASE branch in FreeBSD is very easy
and worth the building mechanisms, especially
Hi All,
I cant ever remember any file edits to get pop3d working.
Now I am getting refused login from the client and also an error
message in ;
/var/log/mail/info
couriertcpd: LOGIN FAILED, user=dwilson, ip=[:::192.168.1.27]
and in /var/log/mail/errors ;
Aug 22 16:52:13 server couriertcpd:
Hi,
Thanks to the linux binary compatibility
(http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/linuxemu-lbc-install.html),
I am able to run a linux application using the linux dynamic library
on a freebsd machine.
Now I am trying to get a freebsd application (same application but
On Mon, Aug 22, 2005 at 04:20:50PM -0700, Chicky ShnoodleSoup wrote:
Hi,
Thanks to the linux binary compatibility
(http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/linuxemu-lbc-install.html),
I am able to run a linux application using the linux dynamic library
on a freebsd machine.
On 08/22/05 05:03 PM, Joshua Weaver sat at the `puter and typed:
What are the symptoms that you need administrator privileges? The default
security scheme, even with the SP2 behemoth installed, require an
administrator or power user to install the printer, but a user can print to
it. Is this
Beecher Rintoul wrote:
I'm working on a box that has a (legal) wireless connection to a business
across the street. After installing isc-dhcp to handle their inside network
I'm getting a lot of the following messages:
dhcpd: DHCPDISCOVER from 00:0e:35:b9:02:a4 via ndis0: network
Hey guys...
Ive setup a NFS correctly (I think) on my BSD 5.4 box
Added
nfs_enable_enable=yes
rpcbind_enable=yes
portmap_enable=yes
in my rc.conf
and its seems to be working...
My question is this..
I can mount the shares without anyproblems as root...
I CAN NOT mount them as a user...
Am Dienstag, 23. August 2005 02:51 CEST schrieb Eric Murphy:
Hey guys...
Ive setup a NFS correctly (I think) on my BSD 5.4 box
Added
nfs_enable_enable=yes
rpcbind_enable=yes
portmap_enable=yes
in my rc.conf
and its seems to be working...
My question is this..
I can mount the
I use freebsd 5.4(with OPTION IPFW on and IPFIREWALL_DEFAULT_TO_ACCEPT
on)+apache+pureftp+natd to setup a server used for ftp/web server and
as a getway for share network too.
My network like this:
--(oip:x.x.x.a)--
| |
(oif:em0)--|
Sebastian Pahlke wrote:
Hi all,
I'm trying to clean a disc before selling them:
dd if=/dev/zero of=/dev/da0
You may want to consider using /dev/random instead of, or in combination
with, /dev/zero. Zeroing out a disk isn't a significant barrier to
forensic analysis.
On Monday 22 August 2005 04:36 pm, Kevin Kinsey wrote:
Beecher Rintoul wrote:
I'm working on a box that has a (legal) wireless connection to a business
across the street. After installing isc-dhcp to handle their inside
network I'm getting a lot of the following messages:
dhcpd:
Eric Murphy wrote:
Hey guys...
Ive setup a NFS correctly (I think) on my BSD 5.4 box
Added
nfs_enable_enable=yes
rpcbind_enable=yes
portmap_enable=yes
in my rc.conf
and its seems to be working...
My question is this..
I can mount the shares without anyproblems as root...
I CAN NOT
On 22/08/2005, at 11:22 AM, Garrett Cooper wrote:
Yes, XP does have a boot manager, and I suppose I should have
listed some available options when I originally replied to the
email. Just thought that someone was making a split decision during
an install and needed quick help.
Can you highlight certain words within the log?
root-tail -f -color darkblue -g 50+500+5+5 /var/log/auth.log
If i were to add a color at the end of /varlog/auth.log like so:
/var/log/auth.log,red
It would negate the -color string...
Im attemping to keep the color dark blue and have words
On Mon, 2005-08-22 at 20:57, Danny MacMillan wrote:
Sebastian Pahlke wrote:
Hi all,
I'm trying to clean a disc before selling them:
dd if=/dev/zero of=/dev/da0
You may want to consider using /dev/random instead of, or in combination
with, /dev/zero. Zeroing out a disk isn't a
Am Dienstag, 23. August 2005 04:29 CEST schrieb Mike Jeays:
On Mon, 2005-08-22 at 20:57, Danny MacMillan wrote:
Sebastian Pahlke wrote:
Hi all,
I'm trying to clean a disc before selling them:
dd if=/dev/zero of=/dev/da0
You may want to consider using /dev/random instead of,
Hi,
I managed to come accross this old Compaq Proliant server and wanted
to try it out for a personal webserver. Since I wanted to try out BSD,
I decided to go with it as the operating system. My choice distro (or
what do you call it?) was FreeBSD because I use Gentoo Linux and it's
package system
You are reading from your cd drive on the bootonly disc, whereas xp is
installed on your HD.
Karol Krizka wrote:
Hi,
I managed to come accross this old Compaq Proliant server and wanted
to try it out for a personal webserver. Since I wanted to try out BSD,
I decided to go with it as the
Am Dienstag, 23. August 2005 05:09 CEST schrieb Karol Krizka:
Hi,
I managed to come accross this old Compaq Proliant server and wanted
to try it out for a personal webserver. Since I wanted to try out BSD,
I decided to go with it as the operating system. My choice distro (or
what do you call
Hi. This is the qmail-send program at bouncehost.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
[EMAIL PROTECTED]:
user is over quota
--- Enclosed are the original headers of the message.
Sorry for asking here, but y'all are the only useful techies I know :)
Am trying to put together my next new FreeBSD server ... Intel based, on
an SE7520JR2 DDR2 motherboard ... problem is simple ...
I have 4x1G Kingston DIMMs to put in (KVR400D2R3K2/2G) ... if I put two in
Bank 1, I can
On 8/22/05, Emanuel Strobl [EMAIL PROTECTED] wrote:
Am Dienstag, 23. August 2005 05:09 CEST schrieb Karol Krizka:
Hi,
I managed to come accross this old Compaq Proliant server and wanted
to try it out for a personal webserver. Since I wanted to try out BSD,
I decided to go with it as the
On Monday 22 August 2005 22:43, Marc G. Fournier wrote:
Sorry for asking here, but y'all are the only useful techies I
know :)
Am trying to put together my next new FreeBSD server ... Intel
based, on an SE7520JR2 DDR2 motherboard ... problem is simple ...
I have 4x1G Kingston DIMMs to put
Hi,
Before I go crazy and change my RELENG_5 to 6 and resync my sources, can
someone point me at a README/UPDATING for upgraders? I'm sure I'll find
one _after_ I cvsup, but I'd like to read it first.
thanks
-- Joel Hatton --
Security Analyst| Hotline: +61 7 3365 4417
AusCERT
I dont test yet, about number of users. But probably this day or
tomorow. Will see.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Monday 22 August 2005 07:43 pm, Marc G. Fournier wrote:
Sorry for asking here, but y'all are the only useful techies I know :)
Am trying to put together my next new FreeBSD server ... Intel based, on
an SE7520JR2 DDR2 motherboard ... problem is simple ...
I have 4x1G Kingston DIMMs to put
On Mon, 22 Aug 2005, Beecher Rintoul wrote:
On Monday 22 August 2005 07:43 pm, Marc G. Fournier wrote:
Sorry for asking here, but y'all are the only useful techies I know :)
Am trying to put together my next new FreeBSD server ... Intel based, on
an SE7520JR2 DDR2 motherboard ... problem is
On Mon, 22 Aug 2005, Josh Paetzel wrote:
On Monday 22 August 2005 22:43, Marc G. Fournier wrote:
Sorry for asking here, but y'all are the only useful techies I
know :)
Am trying to put together my next new FreeBSD server ... Intel
based, on an SE7520JR2 DDR2 motherboard ... problem is simple
On Aug 22, 2005, at 11:33 PM, Marc G. Fournier wrote:
On Mon, 22 Aug 2005, Josh Paetzel wrote:
On Monday 22 August 2005 22:43, Marc G. Fournier wrote:
Sorry for asking here, but y'all are the only useful techies I
know :)
Am trying to put together my next new FreeBSD server ... Intel
On 8/20/05, Giorgos Keramidas [EMAIL PROTECTED] wrote:
On 2005-08-20 09:12, Gareth Campbell [EMAIL PROTECTED] wrote:
Hey guys,
I'm a newbie and have got my box all set up with FreeBSD 5.4, fluxbox
wm, firefox, thunderbird etc... It's all looking awesome, with
transparency, and working
97 matches
Mail list logo
