The FreeBSD Diary: 2005-10-30 - 2005-11-19
The FreeBSD Diary contains a large number of practical examples and how-to guides. This message is posted weekly to freebsd-questions@freebsd.org with the aim of letting people know what's available on the website. Before you post a question here it might be a good idea to first search the mailing list archives http://www.freebsd.org/search/search.html#mailinglists and/or The FreeBSD Diary http://www.freebsddiary.org/. -- Dan Langille BSDCan - http://www.BSDCan.org/ - BSD Conference ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Startx Missing Following Portupgrade
David Armour wrote: hello rob, from /usr/ports/UPDATING: 20051113: AFFECTS: users of x11/xterm, x11/xorg-clients, x11/XFree86-4-clients AUTHOR: [EMAIL PROTECTED] Xterm no longer installs with '-static' prefix. Users should upgrade XFree86-clients to 4.5.0_1 or xorg-clients to 6.8.2_1 or newer before attempting upgrade of xterm to 206_1 or newer. Previous versions remove xterm on deinstall so CONFLICTS have been set accordingly. i only discovered this myself recently. hth. Thanks David, I read the warning in UPDATING. My problem was performing the upgrade while half asleep. I paid a price during the GNOME upgrade as well. Thanks again for taking the time to respond. Bob Perry ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Issue
hi I have installed freeBSD in my laptop.But iam unable to ping to the gateway.So icant access through it.Please give me a solution to it as soon as possible. thanku. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: php5 install fails
does libtool exist in the path? if not, you can change the configuration value of SH_LIBTOOL (SH_LIBTOOL='/usr/local/build-1/libtool') On 11/20/05, P.U.Kruppa [EMAIL PROTECTED] wrote: Hi, on 6.0-STABLE FreeBSD 6.0-STABLE #0: Sat Nov 19 14:31:13 CET 2005 php5 build seems to work fine but install fails: -- [EMAIL PROTECTED] make install === Installing for php5-5.0.5_1 === php5-5.0.5_1 depends on file: /usr/local/sbin/apxs - found === php5-5.0.5_1 depends on executable: pkg-config - found === php5-5.0.5_1 depends on shared library: xml2.5 - found === Generating temporary packing list === Checking if lang/php5 already installed Installing PHP SAPI module: apache2handler /usr/local/share/apache21/build/instdso.sh SH_LIBTOOL='/usr/local/build-1/libtool' libphp5.la /usr/local/libexec/apache21 /usr/local/build-1/libtool --mode=install cp libphp5.la /usr/local/libexec/apache21/ /usr/local/share/apache21/build/instdso.sh: /usr/local/build-1/libtool: not found apxs:Error: Command failed with rc=8323072 . *** Error code 1 Stop in /usr/ports/lang/php5/work/php-5.0.5. *** Error code 1 Stop in /usr/ports/lang/php5. -- What can be done? Regards, Uli. * * Peter Ulrich Kruppa - Wuppertal - Germany * * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
MX freebsd
Any idea how long it takes until the MX freebsd mailservers know that my mail relay has changed? It's three days ago now that I changed my MX records and still mail for nagual.st is routed to my old mx mailservers. Mail arrives (luckely) because those servers are still operational, but...(?) When are the dns servers for the freebsd mailservers updated? -- dick -- http://nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 6.0 ++ The Power to Serve + Nai tiruvantel ar vayuvantel i Valar tielyanna nu vilja ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Proposed license for IETF Contributions
Hi Simon, You might check this but I believe that the Copyright convention specifically excepts specifications from copyright coverage. I think there's some other classes of original work that fall under this. How about simply rewriting the ITEF license to designate any RFC as the complete RFC is a specification, and therefore uncopyrightable. Ted -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Simon Josefsson Sent: Friday, November 18, 2005 7:28 AM To: freebsd-questions@freebsd.org Subject: Proposed license for IETF Contributions Hi all. I noticed the following in the release notes for 6.0: The following manual pages, which were derived from RFCs and possibly violate the IETF's copyrights, have been replaced: gai_strerror(3), getaddrinfo(3), getnameinfo(3), inet6_opt_init(3), inet6_option_space(3), inet6_rth_space(3), inet6_rthdr_space(3), icmp6(4), and ip6(4). [MERGED] I'm working on a proposed update for the copying conditions (i.e., the copyright license) used on IETF Contributions. One goal is to make the license more aligned with open source and free software requirements. More background at http://josefsson.org/bcp78broken/. I'd like the FreeBSD community input on a whether a my proposed license would have avoided the above situation, and similar situations in the future. The issue is whether the RFC 3978 license permit using RFC excerpts in source code or documentation (man pages in your case) that is licensed under a free software license. I believe RFC 3978 do not permit this, and judging from your release notes, it seems you share that view. Anyway. Here is my proposed license: c. The Contributor grants third parties the irrevocable right to copy, use and distribute the Contribution, with or without modification, in any medium, without royalty, provided that redistributed modified works do not contain misleading author or version information. This specifically imply, for instance, that redistributed modified works must remove any references to endorsement by the IETF, IESG, IANA, IAB, ISOC, RFC Editor, and similar organizations and remove any claims of status as Internet Standard, e.g., by removing the RFC boilerplate. The IETF requests that any citation or excerpt of unmodified text reference the RFC or other document from which the text is derived. Comments? Suggestions? RFC excerpts are sometimes used in source code too, so the above scenario with the man pages may not be a isolated accident. I looked at Apache, Samba, OpenSSL and some other packages, and they all cite RFCs in various places. That usage may also be problematic, but I'm not sure. Thanks, Simon ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.4/175 - Release Date: 11/18/2005 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Issue
On Sun, 2005-11-20 at 09:05, kavitha s wrote: hi I have installed freeBSD in my laptop.But iam unable to ping to the gateway.So icant access through it.Please give me a solution to it as soon as possible. thanku. Kavitha, There are so many things it could be it is difficult to even start to answer your question without more information. Please supply as a start: What make etc is the laptop? What version of FreeBSD? Is your ethernet card recognised? what type is it wired or wireless. Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
whereis man pages ?
Hi all, Bad news at wake up. I needed a man pages as a normal wheel group's user and get no manual entry for I tried to get man page from the root account but same result. No more man page available (even man man). Any idea ? Thanks, Ivan. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: portssystem stale dependencies
Sunday 20 November 2005 03:18 skrev RW: On Saturday 19 November 2005 10:37, Philip Lykke Carlsen wrote: .. does anyone know why the problem of stale dependencies in the package system occurs?.. it's just.. the system won't let you install any given port/package without having met all the dependencies.. That's not entirely true, it's really only portupgrade and it's associated tools that have a serious problem with stale dependencies. Portmanager is much more forgiving, as is direct make install installation. Well, then I think that I'll give portmanager a try.. thanks :-) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: whereis man pages ?
On Sun, 2005-11-20 at 11:45, [EMAIL PROTECTED] wrote: Hi all, Bad news at wake up. I needed a man pages as a normal wheel group's user and get no manual entry for I tried to get man page from the root account but same result. No more man page available (even man man). Any idea ? Thanks, Ivan. Have you installed them ? Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: whereis man pages ?
Quoting Robert Slade [EMAIL PROTECTED]: On Sun, 2005-11-20 at 11:45, [EMAIL PROTECTED] wrote: Hi all, Bad news at wake up. I needed a man pages as a normal wheel group's user and get no manual entry for I tried to get man page from the root account but same result. No more man page available (even man man). Any idea ? Thanks, Ivan. Have you installed them ? Sure. I got them during last night. I did not install anything, nor remove anything. Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re[2]: SQUID + antivirus content filter
Hello Steve, they stopped squidguard to make dansguardian (a not free one). You can still find active blacklist (sex, drugs, ...) for squidguard. here is viralator : http://viralator.sourceforge.net/ it works with squid squidguard antivirus supported: AntiVir AVP RAV Inoculate Sophos Sweep McAfee Trend Clamav Bit Defender (free edition) cheers, Mathieu CHATEAU Friday, November 18, 2005, 10:10:40 PM, you wrote: SB -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Vladimir Dvorak Sent: Friday, November 18, 2005 11:53 AM To: freebsd-questions@freebsd.org Subject: SQUID + antivirus content filter Hello *, I would like to secure network against themselves with proxy and antivirus solution. My prerequisities are: SQUID, CLAMAV What software would you recommend for such things ? ( I unsuccesfully tried Viralator in combination with SquidGuard. ) There are other projects like Dansguardian or squid-vscan (which is neccessary to patch squid sources and this is the last step on my production server ). Do you know some good howto, solution ? SB Along with SquidGuard, I've found Dansguardian to be more feature-rich, SB faster, and the new version has the ability (apparently) to plug-in an SB anti-virus app. SB Note I have not tried said version though: SB http://dansguardian.org SB It may/may not be free though: SB DansGuardian 2 is: SB * free for non-commercial use SB * not free for installation by 3rd parties charging for installation SB or support SB * not free for commercial use SB * licensed under the GPL SB * copyright Daniel Barron SB * is a registered trade mark of Daniel Barron SB ...but well worth paying for anyway if need be. SB Steve Thank you, Vladimir ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] SB ___ SB freebsd-questions@freebsd.org mailing list SB http://lists.freebsd.org/mailman/listinfo/freebsd-questions SB To unsubscribe, send any mail to SB [EMAIL PROTECTED] -- Best regards, Mathieumailto:[EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re[2]: SQUID + antivirus content filter
Hello Steve, another one : http://www.openantivirus.org/projects.php cheers, Mathieu CHATEAU Friday, November 18, 2005, 10:10:40 PM, you wrote: SB -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Vladimir Dvorak Sent: Friday, November 18, 2005 11:53 AM To: freebsd-questions@freebsd.org Subject: SQUID + antivirus content filter Hello *, I would like to secure network against themselves with proxy and antivirus solution. My prerequisities are: SQUID, CLAMAV What software would you recommend for such things ? ( I unsuccesfully tried Viralator in combination with SquidGuard. ) There are other projects like Dansguardian or squid-vscan (which is neccessary to patch squid sources and this is the last step on my production server ). Do you know some good howto, solution ? SB Along with SquidGuard, I've found Dansguardian to be more feature-rich, SB faster, and the new version has the ability (apparently) to plug-in an SB anti-virus app. SB Note I have not tried said version though: SB http://dansguardian.org SB It may/may not be free though: SB DansGuardian 2 is: SB * free for non-commercial use SB * not free for installation by 3rd parties charging for installation SB or support SB * not free for commercial use SB * licensed under the GPL SB * copyright Daniel Barron SB * is a registered trade mark of Daniel Barron SB ...but well worth paying for anyway if need be. SB Steve Thank you, Vladimir ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] SB ___ SB freebsd-questions@freebsd.org mailing list SB http://lists.freebsd.org/mailman/listinfo/freebsd-questions SB To unsubscribe, send any mail to SB [EMAIL PROTECTED] -- Best regards, Mathieumailto:[EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: php5 install fails
On Sun, 20 Nov 2005, Mike Fern wrote: does libtool exist in the path? if not, you can change the configuration value of SH_LIBTOOL (SH_LIBTOOL='/usr/local/build-1/libtool') Sorry to say so, but ... I have no idea what you are talking about :-( - what path? - is libtool some kind of executable? - and where and how should I set SH_LIBTOOL? Regards and thanks for your patience, Uli. On 11/20/05, P.U.Kruppa [EMAIL PROTECTED] wrote: Hi, on 6.0-STABLE FreeBSD 6.0-STABLE #0: Sat Nov 19 14:31:13 CET 2005 php5 build seems to work fine but install fails: -- [EMAIL PROTECTED] make install === Installing for php5-5.0.5_1 === php5-5.0.5_1 depends on file: /usr/local/sbin/apxs - found === php5-5.0.5_1 depends on executable: pkg-config - found === php5-5.0.5_1 depends on shared library: xml2.5 - found === Generating temporary packing list === Checking if lang/php5 already installed Installing PHP SAPI module: apache2handler /usr/local/share/apache21/build/instdso.sh SH_LIBTOOL='/usr/local/build-1/libtool' libphp5.la /usr/local/libexec/apache21 /usr/local/build-1/libtool --mode=install cp libphp5.la /usr/local/libexec/apache21/ /usr/local/share/apache21/build/instdso.sh: /usr/local/build-1/libtool: not found apxs:Error: Command failed with rc=8323072 . *** Error code 1 Stop in /usr/ports/lang/php5/work/php-5.0.5. *** Error code 1 Stop in /usr/ports/lang/php5. -- What can be done? Regards, Uli. * * Peter Ulrich Kruppa - Wuppertal - Germany * * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] * * Peter Ulrich Kruppa - Wuppertal - Germany * * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
pppoe + ipfw + natd and jails
Hi, I'm runnig fbsd as a router at home for dsl. Everything was runing fine until one day. Suddenly all pcs in lan stoped opening foreign web pages and connecting to foreign hosts, though I could ping those hosts. That seemd like isp problem so i called them and they said everything is fine. So I started to mess around with ipfw rules. So heres my conf.: dsl modem ^ | [tun0] [rl0] FBSD [bind jail with mldonkey] [squid jail] [rl1] | | ^ LAN The conf. of ipfw and natd that worked earlier #ipfw list 05000 divert 8668 ip from any to any via tun0 06000 allow ip from any to any 65535 deny ip from any to any #cat natd.conf dynamic yes same_ports yes use_sockets yes unregistered_only yes redirect_port tcp 192.168.0.253:4662 4662 redirect_port udp 192.168.0.253:4662 4662 redirect_port tcp 192.168.0.253:4672 4672 redirect_port udp 192.168.0.253:4672 4672 redirect_port tcp 192.168.0.253:6346 6346 redirect_port udp 192.168.0.253:6346 6346 redirect_port tcp 192.168.0.253:6347 6347 redirect_port udp 192.168.0.253:6347 6347 redirect_port tcp 192.168.0.253:6881-6889 6881-6889 redirect_port udp 192.168.0.253:6881-6889 6881-6889 redirect_port tcp 192.168.0.253:1214 1214 redirect_port tcp 192.168.0.253: redirect_port tcp 192.168.0.253: redirect_port udp 192.168.0.253: redirect_port udp 192.168.0.253:2234 2234 [192.168.0.253 is a bind jail with mldonkey] #cat rc.conf gateway_enable=YES hostname=gw.anm.lan ifconfig_pcn0=down ifconfig_rl1=inet 192.168.0.254 netmask 255.255.255.0 ifconfig_rl0=up ifconfig_tun0=up ppp_enable=YES ppp_profile=takas ppp_mode=ddial firewall_enable=YES firewall_type=/etc/firewall/ipfw.rules firewall_quiet=NO natd_enable=YES natd_interface=tun0 natd_flags=-f /etc/firewall/natd.conf usbd_enable=NO sendmail_enable=NONE syslogd_flags=-b 192.168.0.254 IPs to jails aliased added when jail is starting. I use jailctl util for that. #jls JID IP Address Hostname Path 2 192.168.0.252 squid.anm.lan /usr/jails/squid.anm.lan 1 192.168.0.253 ns0.anm.lan/usr/jails/ns0.anm.lan Ok now to the problem solving. when i add this line to ipfw foreign pages are loaded, but mldonkey isn't able to connect: 01000 allow ip from any to any 05000 divert 8668 ip from any to any via tun0 06000 allow ip from any to any 65535 deny ip from any to any so i used the handbook for ipfw and natd and came to this rule set: add 00020 allow all from any to any via rl1 add 00030 allow all from any to any via lo0 add 00100 divert natd ip from any to any in via tun0 add 00101 check-state add 00200 skipto 5000 all from any to any out via rl0 keep-state add 05000 divert natd ip from any to any out via tun0 add 06000 allow all from any to any add 65535 deny ip from any to any but everything is the same: foreign pages are not loaded, mldonkey is downloading. Thanks for help. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: looking for cd2mp3
Here is the link you need. I also sent you a copy of the required file by e-mail. Regards, Ivan. http://wuarchive.wustl.edu/pub/FreeBSD/distfiles/cd2mp3-0.82.tar.gz On Sun, 20 Nov 2005, Chris wrote: does anyone have a copy of cd2mp3-0.82.tar.gz they could email me or a URL where I can find it? I assume you've googled for it but come up empty, as I did. Is there something else that might do what you want? Perhaps cdda2wav plus lame? HTH. -- Chris Hill [EMAIL PROTECTED] ** [ Busy Expunging | ] -- Ivan Roth ([EMAIL PROTECTED]), quite newbie, sometimes helpful ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: MX freebsd
dick hoogendijk [EMAIL PROTECTED] wrote: Any idea how long it takes until the MX freebsd mailservers know that my mail relay has changed? It's three days ago now that I changed my MX records and still mail for nagual.st is routed to my old mx mailservers. Mail arrives (luckely) because those servers are still operational, but...(?) When are the dns servers for the freebsd mailservers updated? Depends on how your DNS was set up. _Your_ DNS records include information about how long it is OK to cache DNS records. I've seen these timeouts occasionally set as high as a week, although even larger values are certainly possible. Check in your DNS zone to see what they are set to. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problem with KDE 3.4.3
I have a problem with compilling KDE: c++ -c -pipe -fno-exceptions -fPIC -Wall -W -O -pipe -march=athlon-xp -DDESIGNE R -DQT_INTERNAL_XML -DQT_INTERNAL_WORKSPACE -DQT_INTERNAL_ICONVIEW -DQT_INTERNAL _TABLE -DQT_TABLET_SUPPORT -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -DQT_SHARED -I/usr/ local/share/qt/mkspecs/freebsd-g++ -I. -I/usr/local/include/freetype2 -I/usr/loc al/include -I../shared -I../uilib -I/usr/local/include -I../../../include -I.moc /release-shared-mt/ -o ./qmake_image_collection.o qmake_image_collection.cpp qmake_image_collection.cpp:1:1: unterminated comment qmake_image_collection.cpp:215:39: warning: no newline at end of file *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.5/tools/designer/desig ner. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.5/tools/designer. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.5/tools. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33/work/qt-x11-free-3.3.5. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33. *** Error code 1 Any ideas whats wrong? # uname -a FreeBSD ivo-laptop.posiflexbg.com 6.0-STABLE FreeBSD 6.0-STABLE #1: Sun Nov 20 01:19:53 EET 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 I started to compile with optimizations in make.conf for Athlon-xp but with this error I clear these lines... ___ To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: MX freebsd
Bill Moran wrote: dick hoogendijk [EMAIL PROTECTED] wrote: Any idea how long it takes until the MX freebsd mailservers know that my mail relay has changed? It's three days ago now that I changed my MX records and still mail for nagual.st is routed to my old mx mailservers. Mail arrives (luckely) because those servers are still operational, but...(?) When are the dns servers for the freebsd mailservers updated? Depends on how your DNS was set up. _Your_ DNS records include information about how long it is OK to cache DNS records. And don't forget to update the Serial on your DNS source file otherwise nothing will notice the change. --Alex ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
comms/mlan3 port woes [SOLVED (enough)]
Following myself up (gulp): http://www.freebsd.org/cgi/cvsweb.cgi/ports/comms/mlan3/files/patch-aa?rev=1.2content-type=text/x-cvsweb-markup I can *almost* see what needs doing to patch-aa to hopefully fix the broken make for the thermo programs, cloned from other subdir Makefiles, but I don't know how to go about fixing that, where to put things, or how to generate an updated patch file and apply it. I spent Sunday afternoon amongst the Porter's Handbook and bsd.*.make files, learning enough to move some stuff around, hack some Makefiles, rm dross and restart from 'make build' to compile the 2 ThermoCron programs. Still have no idea how to generate a proper patch to do that, but I can outline what I did and when, offlist, should anybody else be in need .. Cheers, Ian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cyrus-sasl2 compile option
Hello Gerard I ran in the same trouble. With some changes you can use the article in the handbook. Should I send you my hints? Am Tue, Nov 08, 2005 at 08:36:32AM -0500 Gerard Seibert schrieb: I found this notation on regarding cyrus-sasl on the FreeBSD site http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/smtp-auth.html. [snip] Does this apply to cyrus-sasl2 as well? I tried 'make config' but that produced nothing. I do not see any option for the 'pwcheck' option in the Makefile. What, if any compile options should I include on the command line? I am running FreeBSD 5.4 at present. -- Regards Martin Schweizer [EMAIL PROTECTED] PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch; public key : http://www.pc-service.ch/pgp/public_key.asc; fingerprint: EC21 CA4D 5C78 BC2D 73B7 10F9 C1AE 1691 D30F D239; pgpVO995gpwTH.pgp Description: PGP signature
Re: Proposed license for IETF Contributions
Ted Mittelstaedt wrote: You might check this but I believe that the Copyright convention specifically excepts specifications from copyright coverage. I think there's some other classes of original work that fall under this. How about simply rewriting the ITEF license to designate any RFC as the complete RFC is a specification, and therefore uncopyrightable. I'm not a lawyer, but I strongly believe under the Berne convention RFCs have copyright. The technical details described in an RFC may be protected by other IP laws, such as patent law for example, if the originator chose to patent those details, but the text of the RFC document itself, describing those details, is an original composition which satisfies the terms of the convention. The only means of rescinding copyright is for the copyright owner to explicitly place the work into the public domain. Simon's proposed license seems reasonable to me. It is essentially a BSD-style license, allowing royalty-free redistribution and modification, but with a difference when it comes to attribution. Original unmodified text from a specification must contain an attribution to the source document, while any modified versions (which may contain inaccuracies) have to have all references to the source organizations removed. The Berne convention is online, at the WIPO site: http://www.wipo.int/treaties/en/ip/berne/trtdocs_wo001.html#P85_10661 -- James Bailie [EMAIL PROTECTED] http://www.jamesbailie.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
VLAN security question
I set up a FreeBSD box to be firewall/NAT/mailserver/etc. for a company, but that company subsequently went to a VoIP system, installed a Cisco switch, programmed the switch to route Internet traffic through the BSD box as before but also to route telephone traffic NOT through it, then set things up so that the workstations in the building are plugged into the phones (which have little hubs in them). Internet traffic is now on a VLAN, and telephone traffic is on a different VLAN. Running tcpdump on a workstation indicates that VLAN traffic can be seen there (sensible because the phones contain hubs, not switches). Tcpdump also shows that people on the Internet can send packets onto the telephone VLAN (i.e., random packets from the world can reach the phones and the workstations on that VLAN). The packets I'm seeing with tcpdump are still encapsulated. Question: Is this a security problem? For example, can a packet be crafted out there to show up non-encapsulated and on the workstation network, thus circumventing my FreeBSD firewall? Up to now, I've been assuming that this network is as secure as the phones themselves, meaning that if someone can hack a telephone and make it do things on the network, we have a problem, but otherwise we don't. That prospect also bothers me but is probably outside the scope of my question. :-) -- Doug Lee [EMAIL PROTECTED] SSB + BART Group [EMAIL PROTECTED] http://www.bartsite.com Determine that the thing can and shall be done, and then...find the way. - Abraham Lincoln ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: M571 Internal Audio
[EMAIL PROTECTED] writes: Lowell Gilbert [EMAIL PROTECTED]: Thank you for answer. 4.10-RELEASE. When play .au, speakers produce some noise for a second. When play .mp3, speakers are silent and kernel reports: pcm0:play:0: play interrupt timeout, channel dead CM8330 SB16 Driver (WDM) C-Media CM8330 Audio Driver (WDM) What are you doing to play your sound files? cat madcow.au /dev/sound play madcow.au play ttt.mp3 mpeg123 ttt.mp3 Here play is sox' one. Disabling loading mss module and adding device pcm0 port at isa? port 0x240 irq 07 drq 05 flags 0x17 doesn't help: first device still isn't detected and second one appears as pcm1. I've tried snd0 sb device. Now tring sbxvi... You might need them both together; take a close look at the manual page. Also consider updating to FreeBSD 6.0, because the sound drivers have not only been improved, but also just plain *changed*. And I, for one, don't remember the 4.x era sound drivers in enough detail to be all that much help. By the way, I've found today, that C-Media CM8330 eats great amount of CPU time in W2k when playing... That is quite strange. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: remote install
Arden [EMAIL PROTECTED] writes: I have some old machines (amd400s) which I'm using for education I only have the one spare monitor and I don't have a KVM switch at the mo and I'm sick of moving the connectors they are all on the same network as my BSD and Linux box is it possible to reload the os using remote log-in ssh or the like ? Sure, especially if you're not making to big a version jump . After all, you *can* plug in a monitor if something goes wrong, ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Looking for freebsd/openbsd Open Source project for multi-WAN load-sharing/failover firewall/internet gateway
I am looking for any open source project that can help me build manage, preferably through a GUI, a multi WAN firewall gateway to the internet, with DMZ, load-sharing, traffic bifurcation on priority/port and auto-ISP failover on any WAN link with IDS/IPS, NAT VPN features. I am not necessarily looking for a firewall distro...but various components that come together (on a minimal OS install) to build a GUI based firewall internet gateway appliance, having the multiple WAN capability. I basically want a minimalist design, which is open source, free and offers the above features. Some examples are the IPcop, m0n0wall (plus multiple WAN links) Sonicwall, Watchguard, Fortigate etc., minus their additional applications like mail anti-virus, mail servers, web-servers (except for whatever is minimal need for GUI) etc. Hope someone can suggest a good solution. With regards. Sanjay. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cannot erase cd-rw
For some reason, I can't erase cd-rws. I have tried K3b, cdrecord and burncd. Below is the output from cdrecord, can someone please help out? sudo cdrecord -v blank=all dev=1,1,0 Password: Cdrecord-Clone 2.01 (i386-unknown-freebsd5.4) Copyright (C) 1995-2004 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,1,0' scsibus: 1 target: 1 lun: 0 Using libscg version 'schily-0.8'. SCSI buffer size: 64512 atapi: 0 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'ATAPI ' Identifikation : 'CD-R/RW 48X16 ' Revision : '9.EK' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO RAW/R16 RAW/R96R Drive buf size : 1630208 = 1592 KB Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 3 A1 values: 24 1A BC A2 values: 26 B2 26 Disk type:Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Starting to write CD/DVD at speed 12 in real BLANK mode for single session. Last chance to quit, starting real write0 seconds. Operation starts. Performing OPC... Blanking entire disk cdrecord: Input/output error. blank unit: scsi sendcmd: retryable error CDB: A1 00 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 A1 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0xA1 Qual 0x10 (vendor unique sense code 0xA1) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 20.756s timeout 9600s cdrecord: Cannot blank disk, aborting. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error on boot, significant?
I have recently rebuilt my system up to 6.0. In this process I modified my kernel so that it had the extra lines (taken from NOTES): device tdfx# Enable 3Dfx Voodoo support options TDFX_LINUX # Enable Linuxulator support device drm device tdfxdrm This is to support my Voodoo 3 video card with all it's potential tapped. upon boot I get the following messages FreeBSD 6.0-STABLE #3: Wed Nov 16 07:13:11 PST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERNEL6 module_register: module pci/tdfx already exists! Module pci/tdfx failed to register: 17 Timecounter i8254 frequency 1193182 Hz quality 0 ... To me, this seems like a problem but I was hoping somebody who understood this a little bit more could clarify what's going on their. I'm I getting all the bang for my buck from my video card? -- What time is it? Dodgeball Time! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Issue
On Sun, Nov 20, 2005 at 09:05:51AM +, kavitha s wrote: hi I have installed freeBSD in my laptop.But iam unable to ping to the gateway.So icant access through it.Please give me a solution to it as soon as possible. thanku. Not enough information provided. Please provide: contents of /etc/rc.conf ifconfig -a netstat -r -- Jonathan Chen [EMAIL PROTECTED] -- Lots of folks confuse bad management with destiny - Kin Hubbard ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re[2]: cyrus-sasl2 compile option
On Sunday, November 20, 2005 12:50:33 PM, Martin Schweizer [EMAIL PROTECTED] Subject: Re: cyrus-sasl2 compile option Wrote these words of wisdom: Hello Gerard I ran in the same trouble. With some changes you can use the article in the handbook. Should I send you my hints? Am Tue, Nov 08, 2005 at 08:36:32AM -0500 Gerard Seibert schrieb: I found this notation on regarding cyrus-sasl on the FreeBSD site http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/smtp-auth.html. [snip] Does this apply to cyrus-sasl2 as well? I tried 'make config' but that produced nothing. I do not see any option for the 'pwcheck' option in the Makefile. What, if any compile options should I include on the command line? I am running FreeBSD 5.4 at present. -- Regards Martin Schweizer [EMAIL PROTECTED] PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch; public key : http://www.pc-service.ch/pgp/public_key.asc; fingerprint: EC21 CA4D 5C78 BC2D 73B7 10F9 C1AE 1691 D30F D239; * REPLY SEPARATOR * On 10/11/2005 5:29:42 PM, Gerard Replied: Send away! -- Gerard Seibert [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Port overrides for multiple installs.
Lewis Thompson [EMAIL PROTECTED] writes: I would like to run Mailman on a dedicated mail box. While Mailman supports virtual domains it cannot provide, say, [EMAIL PROTECTED] and [EMAIL PROTECTED] from the same installation. I plan to run Mailman on about three domains and have considered ways to tie this into the ports system. My idea is basically: create the mail/mailman-dom1 port which is something like: PKGNAMESUFFIX= -dom1 MASTERDIR= ${.CURDIR}/../mailman MM_DIR= mailman/dom1 MM_USERNAME=mailman-dom1 While this will work (and moving the mailman.sh file via pkgtools.conf) it will only work for a single installation, afaik. So my question is: how can I allow mailman to be installed n times without overwriting the database, files, etc.? Define PREFIX? [see ports(7)] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot erase cd-rw
On Sun, Nov 20, 2005 at 12:16:35PM -0600, Brian John wrote: For some reason, I can't erase cd-rws. I have tried K3b, cdrecord and burncd. Below is the output from cdrecord, can someone please help out? Well, I can confirm the issue. I have the same problem with 6.0-STABLE amd64. Additionally, burning DVD+RW (with dvd+rwtools) sometimes produces unmountable discs. Forcebly erasing the disks and retrying helps. Roland -- R.F.Smith (http://www.xs4all.nl/~rsmith/) Please send e-mail as plain text. public key: http://www.xs4all.nl/~rsmith/pubkey.txt pgp81HAH9DkDv.pgp Description: PGP signature
HP Proliant ML110 installation issue.
I'm trying to do an FreeBSD install on my new HP Proliant ML110 server. This thing has an Promise SATA RAID card, model PDC20621, I think it's causing some problems. Since the server has only 2 x 160Gb SATA Maxtor hotswap drives and a tape for backup I have the disks in RAID 1. Which ads up to a nice 320Gb. The server is going to be used as HTTP/FTP server and will be mirroring some files. When I try to boot up the FreeBSD installation this is what happens. The first problem: ad8 is the first 160Gb SATA ad8: Failure - SETFEATURES SET TRANSFERMODE timed out ad8: Failure - SETFEATURES ENABLE RCACHE timed out ad8: Failure - SETFEATURES ENABLE WCACHE timed out ad10 the second sata. The same errors as ad8. Then it hangs in a loop saying, ad8: req=0xc1b0f960 SETFEATURES SET TRANSFERMODE semaphore timeout. Danger Will Robinsson !! Anyone have a clue where to start fixing this or is it just incompatible hardware? Sincerely, Mats Hellman ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Missing origins during portupgrade ...
When running portupgrade, I keep getting a 'missing origin' warning messages for a number of packages. What gives, and what do I need to do to remove this Thanks alot in advance. -- Kiffin Gish Gouda, The Netherlands ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
PHP stopped working :(
Hi all, I have a FreeBSD 6.0 system which had PHP4 running perfectly fine on it. However, I wanted to install Horde (www.horde) with IMP, which requires IMAP support, so I decided to try and recompile PHP using /usr/ports/lang/php4-extensions, first running make deinstall in php4-extensions and php4. At first, this did not work. I checked, and sure enough, the old data for the compilation was in /var/db/ports, so I deleted it out. Anyway, I ran make and make install in /usr/ports/lang/php4-extensions without any problems, then I ran make and make install in /usr/ports/lang/php4. This is where I first noticed things looked a bit weird. It didn't seem like php4 was completely recompiling it; that is, it didn't seem to take long enough. But it claimed to have worked correctly, so I restarted Apache. Lo and behold, my problems started. First off, and this is weird, my test file - a simple file containing only a callto phpInfo() - will work in IE, but not in Firefox. Check it out: http://list.mchgroup.org/test.php Second, SquirrelMail won't load at all: http://list.mchgroup.org/squirrelmail/src/login.php I have tried deinstalling and reinstalling PHP countless times now, with no results. I checked my httpd.conf file, and all seems okay. Any ideas what this could be? I'm very trustrated at this point, and am considering blowing away Apache and starting it from scratch :( Thanks, Matt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PHP stopped working :(
On Nov 20, 2005, at 2:09 PM, Matt Singerman wrote: Hi all, I have a FreeBSD 6.0 system which had PHP4 running perfectly fine on it. However, I wanted to install Horde (www.horde) with IMP, which requires IMAP support, so I decided to try and recompile PHP using /usr/ports/lang/php4-extensions, first running make deinstall in php4-extensions and php4. At first, this did not work. I checked, and sure enough, the old data for the compilation was in /var/db/ports, so I deleted it out. Anyway, I ran make and make install in /usr/ports/lang/php4-extensions without any problems, then I ran make and make install in /usr/ports/lang/php4. This is where I first noticed things looked a bit weird. It didn't seem like php4 was completely recompiling it; that is, it didn't seem to take long enough. But it claimed to have worked correctly, so I restarted Apache. Lo and behold, my problems started. First off, and this is weird, my test file - a simple file containing only a callto phpInfo() - will work in IE, but not in Firefox. Check it out: http://list.mchgroup.org/test.php Second, SquirrelMail won't load at all: http://list.mchgroup.org/squirrelmail/src/login.php I have tried deinstalling and reinstalling PHP countless times now, with no results. I checked my httpd.conf file, and all seems okay. Any ideas what this could be? I'm very trustrated at this point, and am considering blowing away Apache and starting it from scratch :( Thanks, Matt Try going to the respective ports directories and type make clean. - Eric F Crist Secure Computing Networks http://www.secure-computing.net ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Missing origins during portupgrade ...
On Sunday 20 November 2005 11:58, Kiffin Gish wrote: When running portupgrade, I keep getting a 'missing origin' warning messages for a number of packages. What gives, and what do I need to do to remove this Thanks alot in advance. Do you have custom bsdpan modules installed by any chance? -Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: M571 Internal Audio
Цитирую Lowell Gilbert [EMAIL PROTECTED]: 4.10-RELEASE. When play .au, speakers produce some noise for a second. When play .mp3, speakers are silent and kernel reports: pcm0:play:0: play interrupt timeout, channel dead CM8330 SB16 Driver (WDM) C-Media CM8330 Audio Driver (WDM) What are you doing to play your sound files? cat madcow.au /dev/sound play madcow.au play ttt.mp3 mpeg123 ttt.mp3 Here play is sox' one. Disabling loading mss module and adding device pcm0 port at isa? port 0x240 irq 07 drq 05 flags 0x17 doesn't help: first device still isn't detected and second one appears as pcm1. I've tried snd0 sb device. Now tring sbxvi... You might need them both together; take a close look at the manual page. Yes, you are right. But this configuration wasn't successful too. Also consider updating to FreeBSD 6.0, because the sound drivers have not only been improved, but also just plain *changed*. And I, for one, don't remember the 4.x era sound drivers in enough detail to be all that much help. Thank you for advice, but machine running FreeBSD is slow... I better have fast system with gcc2, which occupies less space, than system with gcc3.4, which is a bit more heavy, but where sound works (if it is really so). :-) Well, and why can I get such messages: pcm0:play:0: play interrupt timeout, channel dead ? What can be wrong? Sound card is detected, IRQ, DMA, port are right. I've found some similiar problems in Google, but solutions from there didn't match my case. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PHP stopped working :(
On Sunday, November 20, 2005 3:09:53 PM, Matt Singerman [EMAIL PROTECTED] Subject: PHP stopped working :( Wrote these words of wisdom: Hi all, I have a FreeBSD 6.0 system which had PHP4 running perfectly fine on it. However, I wanted to install Horde (www.horde) with IMP, which requires IMAP support, so I decided to try and recompile PHP using /usr/ports/lang/php4-extensions, first running make deinstall in php4-extensions and php4. At first, this did not work. I checked, and sure enough, the old data for the compilation was in /var/db/ports, so I deleted it out. Anyway, I ran make and make install in /usr/ports/lang/php4-extensions without any problems, then I ran make and make install in /usr/ports/lang/php4. This is where I first noticed things looked a bit weird. It didn't seem like php4 was completely recompiling it; that is, it didn't seem to take long enough. But it claimed to have worked correctly, so I restarted Apache. Lo and behold, my problems started. First off, and this is weird, my test file - a simple file containing only a callto phpInfo() - will work in IE, but not in Firefox. Check it out: http://list.mchgroup.org/test.php Second, SquirrelMail won't load at all: http://list.mchgroup.org/squirrelmail/src/login.php I have tried deinstalling and reinstalling PHP countless times now, with no results. I checked my httpd.conf file, and all seems okay. Any ideas what this could be? I'm very trustrated at this point, and am considering blowing away Apache and starting it from scratch :( Thanks, Matt * REPLY SEPARATOR * On 10/11/2005 5:29:42 PM, Gerard Replied: Maybe I am misunderstanding you; however, the test.php file displays just fine using FireFox. At least it does on my machine. The SquirrelMail link does not load though. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: starting services?
Gerry Freymann wrote: On Thu, 17 Nov 2005 08:45:14 -0500 Lonnie Cumberland [EMAIL PROTECTED] wrote: I have just installed the Samba3 via the packages in the /stand/sysinstall but am not clear on how to start the daemon. I have had a lot of experience with Linux but have not learned a lot about FreeBSD yet and am working on it. Welcome to FreeBSD. You didn't mention what version you are using, so I can only speak definitively on v4. If you installed via the ports/packages, it should have dropped a start up script in /usr/local/etc/rc.d (which is where a lot of the start up/shut down scripts go for various programs). You may have something in there called samba.sh.sample. If you copy it or rename it to samba.sh it will automatically start and stop samba for you as needed. If you manually want to do this, you *must* use the full path to the script: /usr/local/etc/rc.d/samba.sh start | stop You should find what you need in /usr/local/etc/rc.d i wonder why i cannot start for instance ssh with /etc/rc.d/sshd start but i always have to use /etc/rc.d/sshd forcestart and similarly for stop, status, etc. any ideas pls ?? cheers, martin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Via RAID0 problem
I am trying to form a RAID0 Array with FreeBSD 6.0 on an Asus A8V motherboard. It seems as if the kernel is not reading the Array properly as my RAID config tells me that I have 68G in my Array, but ar0 only sees what the capacity of one disk. I have an Intel motherboard that worked flawlessly. I have searched google and bsdforums with no luck. Is there something I am missing or a could this be a bug? # uname -a FreeBSD 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64 # dmesg ... ad4: 35304MB WDC WD360GD-00FNA0 35.06K35 at ata2-master SATA150 ad6: 35304MB WDC WD360GD-00FLA2 31.08F31 at ata3-master SATA150 ar0: 35304MB VIA Tech V-RAID RAID0 (stripe 64 KB) status: READY ar0: disk0 READY using ad4 at ata2-master ar0: disk1 READY using ad6 at ata3-master ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re[2]: starting services?
On Friday, November 18, 2005 3:15:25 PM, martinko [EMAIL PROTECTED] Subject: Re: starting services? Wrote these words of wisdom: Gerry Freymann wrote: On Thu, 17 Nov 2005 08:45:14 -0500 Lonnie Cumberland [EMAIL PROTECTED] wrote: I have just installed the Samba3 via the packages in the /stand/sysinstall but am not clear on how to start the daemon. I have had a lot of experience with Linux but have not learned a lot about FreeBSD yet and am working on it. Welcome to FreeBSD. You didn't mention what version you are using, so I can only speak definitively on v4. If you installed via the ports/packages, it should have dropped a start up script in /usr/local/etc/rc.d (which is where a lot of the start up/shut down scripts go for various programs). You may have something in there called samba.sh.sample. If you copy it or rename it to samba.sh it will automatically start and stop samba for you as needed. If you manually want to do this, you *must* use the full path to the script: /usr/local/etc/rc.d/samba.sh start | stop You should find what you need in /usr/local/etc/rc.d i wonder why i cannot start for instance ssh with /etc/rc.d/sshd start but i always have to use /etc/rc.d/sshd forcestart and similarly for stop, status, etc. any ideas pls ?? cheers, martin * REPLY SEPARATOR * On 10/11/2005 5:29:42 PM, Gerard Replied: You need the following directives in the /etc/rc.conf file. samba_enable=YES sshd_enable=YES Now, reboot the machine and both services should start up. You will see a message displayed as they are started. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
wireless pc card
I am trying FreeBSD 6.0 on my laptop since reading of wireless capabilities. I have a D-Link DWL-AG650 card and see the card below in my /etc/defaults/pccard.conf: # D Link DWL-650 11Mbps WLAN Card card D Link DWL-650 11Mbps WLAN Card config auto wi ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop It is missing the AG, but so close I was hoping to get it going. I have pccard_enable=YES in my rc.conf and see the following in dmesg whenever I plug in the card: cardbus1: network, ethernet at device 0.0 (no driver attached) I guess this means this card will not work? If so, anyone suggest a way to get it working? I ask this because I found the following post that sounds like someone did have theirs working, but I do not see an ath0: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=265162+0 +archive/2004/freebsd-mobile/20040118.freebsd-mobile -- Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: UPS advice, please ...
Hello Kiffin, Friday, November 18, 2005, 10:20:08 PM, you wrote: I have a couple web servers running FreeBSD 5.x and need to protect them against power outages. These are two simple machines running at home so nothing fancy. Just some way to do a power down neatly so the shutdown has time to clean up. What do I need and where can I look for more detailed information. check this out, I use it and it works with many different UPS. # cd /usr/ports/sysutils/nut # cat pkg-descr This is a developing project to monitor a large assortment of UPS hardware. Network communications are used so that multiple systems can monitor a single physical UPS and shut down together if necessary without any special sharing hardware on the UPS itself. CGI scripts are provided to monitor UPS status via a WEB browser. WWW: http://www.networkupstools.org/ - Doug Barton [EMAIL PROTECTED] -- Best regards, Cezarmailto:[EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How do I re-format 'dangerously dedicated' drive?
Hi all, I don't have an MS-DOS floppy, and I think my CDROM isn't booting because the HD is 'dangerously dedicated,' even though it is a bootable CD and the BIOS is set to boot it first. I want to totally clear my drive so I can reinstall from scratch from CDROM. How can I do this? jm -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
reaplay and mplay/mplugin....
I've run into the problen bedore with firefox anf linux-firefox. Now similar probs with Ubuntu on my test server. I login to NPR or any web audio site and play things selecting their Real Audio button. I just tested a windows site and mplugin worked just fine. But when I selected Real Audio, firefox auto-loads the mplayer plugin. Then, after trying to connect, it stops. I'd be pleased to use just one audio app that does everything: mp3, mp4/aacplus, realplay streams, or windows. What do I need to do to enable this? Should I pkg_delete my real/helix port? Is having both realplay and mplayer/mplayerplugin causing the confusion? Any ideas? gary -- Gary Kline [EMAIL PROTECTED] www.thought.org Public service Unix ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: UPS advice, please ...
Second the motion -- nut works well with the APC ups's -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cezar Fistik Sent: Monday, November 21, 2005 10:05 AM To: freebsd-questions@freebsd.org Subject: Re: UPS advice, please ... Hello Kiffin, Friday, November 18, 2005, 10:20:08 PM, you wrote: I have a couple web servers running FreeBSD 5.x and need to protect them against power outages. These are two simple machines running at home so nothing fancy. Just some way to do a power down neatly so the shutdown has time to clean up. What do I need and where can I look for more detailed information. check this out, I use it and it works with many different UPS. # cd /usr/ports/sysutils/nut # cat pkg-descr This is a developing project to monitor a large assortment of UPS hardware. Network communications are used so that multiple systems can monitor a single physical UPS and shut down together if necessary without any special sharing hardware on the UPS itself. CGI scripts are provided to monitor UPS status via a WEB browser. WWW: http://www.networkupstools.org/ - Doug Barton [EMAIL PROTECTED] -- Best regards, Cezarmailto:[EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ***This Email has been scanned for Viruses by MailMarshal.*** --- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --- ***This Email has been scanned for Viruses by MailMarshal.*** ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How do I re-format 'dangerously dedicated' drive?
On Sun, 2005-11-20 at 23:24 +, Jonathon McKitrick wrote: Hi all, I don't have an MS-DOS floppy, and I think my CDROM isn't booting because the HD is 'dangerously dedicated,' even though it is a bootable CD and the BIOS is set to boot it first. I want to totally clear my drive so I can reinstall from scratch from CDROM. How can I do this? jm I would reset the BIOS to boot from the CD, and then do a complete reinstall. The boot order can usually be set to whatever you like. A complete reinstall will then give you the opportunity to restore the usual disk labels and boot manager. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mozilla: Undefined symbol pango_x_font_map_for_display
Hi, Mozilla cannot start anymore, after I portupgraded Mozilla, I now get this: $ mozilla /libexec/ld-elf.so.1: /usr/X11R6/lib/mozilla/components/libgfx_gtk.so: Undefined symbol pango_x_font_map_for_display $ Has anybody any idea where this comes from? I have no idea what to do, to solve this problem. Thanks, Rob. __ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How do I re-format 'dangerously dedicated' drive?
Jonathon McKitrick [EMAIL PROTECTED] writes: I don't have an MS-DOS floppy, and I think my CDROM isn't booting because the HD is 'dangerously dedicated,' even though it is a bootable CD and the BIOS is set to boot it first. That wouldn't be relevant. The BIOS is lying to you, or isn't capable of booting this particular CD. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PHP stopped working :(
no errors in the httpd-error.log? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
background fsck
what is the rule to decide if filesystem may be background checked or not? for example my / is checked foreground, while /home checked background. can't root partition be background checked too? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Xorg trouble with nvidia graphic card
post your xorg.conf and what card, monitor are you exactly using? Also do a pkg_info |grep nvidia and paste the output On Fri, 2005-11-18 at 16:42 -0500, Lowell Gilbert wrote: [EMAIL PROTECTED] writes: First, sorry about asking two questions at the same time. I am using freeBSD 6.0 under Gnome 2.10 and I am having trouble with display resolution. I got the same issue under many Linux distributions I tried last month (including FC4, Debian an Suse 10.0). The issue is that display is like full of blur in 1280x1024 resolution but perfect in 1024x768. I tried to update the nvidia driver under Linux and finally got a good display after some more changes. I don't know how to reproduce this so I cannot work at 1280x1024. I am not sure to be clear enough. Do not hesitate to ask me more informations. The same configuration file would probably work. If you don't need acceleration, you could try the regular open-source driver (nv instead of nvidia) and probably get good results. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Dev Tugnait [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: background fsck
On 11/20/05, Wojciech Puchar [EMAIL PROTECTED] wrote: what is the rule to decide if filesystem may be background checked or not? for example my / is checked foreground, while /home checked background. can't root partition be background checked too? The root partition is probably checked in the foreground for safety reasons, since the root partition is so critical to everything on the server. Personally I don't use or trust background fscks -- when a server comes back up after a crash, I'd rather it just finish the fsck before coming up live, since the fsck does slow the server down noticably (and if it was an already busy web server, this can be a problem). There's also the matter of serious problems with background fscks, with open PRs: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/53137 http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/86423 and the less serious (since it is about UFS1): http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/84589 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
linuxflashplugin
I accidently did a portupgrade on linuxflashplugin. That went ok, but now I have no plugins in firefox, either in /usr/X11R6/lib/browser_plugins or anywhere else I have found. Any ideas on how to fix this. All of the other ports are installed. Libmap.conf is properly installed. Beech --- Beech Rintoul - System Administrator - [EMAIL PROTECTED] /\ ASCII Ribbon Campaign | NorthWind Communications \ / - NO HTML/RTF in e-mail | 201 East 9th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ --- pgp9gcvWpn0Ss.pgp Description: PGP signature
linuxpluginwrapper (was linuxflashplugin)
Sorry...Imeant to say pluginwrapper. I accidently did a portupgrade on linuxpluginwrapper. That went ok, but now I have no plugins in firefox, either in /usr/X11R6/lib/browser_plugins or anywhere else I have found. Any ideas on how to fix this. All of the other ports are installed. Libmap.conf is properly installed. Beech --- Beech Rintoul - System Administrator - [EMAIL PROTECTED] /\ ASCII Ribbon Campaign | NorthWind Communications \ / - NO HTML/RTF in e-mail | 201 East 9th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ --- pgpehG7RMSk0i.pgp Description: PGP signature
Re: linuxpluginwrapper (was linuxflashplugin)
On November 20, 2005 09:02 pm, Beecher Rintoul wrote: Sorry...Imeant to say pluginwrapper. I accidently did a portupgrade on linuxpluginwrapper. That went ok, but now I have no plugins in firefox, either in /usr/X11R6/lib/browser_plugins or anywhere else I have found. Any ideas on how to fix this. All of the other ports are installed. Libmap.conf is properly installed. Beech What happens when you : cd /usr/X11R6/lib/browser_plugins ln -s /usr/X11R6/lib/linux-flashplugin6/flashplayer.xpt ln -s /usr/X11R6/lib/linux-flashplugin6/libflashplayer.so and so on? Nicolas. -- FreeBSD 7.0-CURRENT #1: Sat Nov 19 12:36:29 EST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CLK01A PGP? (updated 16 Nov 05) : http://www.clkroot.net/security/nb_root.asc pgpIJrz0ECBSz.pgp Description: PGP signature
Re: UPS advice, please ...
On Nov 20, 2005, at 5:55 PM, Murray Taylor wrote: Second the motion -- nut works well with the APC ups's -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cezar Fistik Sent: Monday, November 21, 2005 10:05 AM To: freebsd-questions@freebsd.org Subject: Re: UPS advice, please ... Hello Kiffin, Friday, November 18, 2005, 10:20:08 PM, you wrote: I have a couple web servers running FreeBSD 5.x and need to protect them against power outages. These are two simple machines running at home so nothing fancy. Just some way to do a power down neatly so the shutdown has time to clean up. What do I need and where can I look for more detailed information. check this out, I use it and it works with many different UPS. # cd /usr/ports/sysutils/nut # cat pkg-descr This is a developing project to monitor a large assortment of UPS hardware. Network communications are used so that multiple systems can monitor a single physical UPS and shut down together if necessary without any special sharing hardware on the UPS itself. CGI scripts are provided to monitor UPS status via a WEB browser. WWW: http://www.networkupstools.org/ I personally use APC UPS with apcupsd (in ports) which works very well with the USB cable supplied. - Eric F Crist Secure Computing Networks http://www.secure-computing.net ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PHP stopped working :(
Hi, I am going to try a make clean and see how that works. I already tried it, though, so I am not too hopeful at this point. The fact that sq. mail isn't loading is the very problem. PHP page aren't working correctly. I am not seeing any relevant errors in httpd-errors. On 11/20/05, Derrick MacPherson [EMAIL PROTECTED] wrote: no errors in the httpd-error.log? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FVWM menu and keyboard config transposition to KDE?
I know this is a strange question, but I'm a long time FVWM2 user (7+ years) and I've got a pretty extensive set of keyboard shortcuts and menu setups. Now, I'm starting to play with KDE (just for yuks, really) and I've gotta wonder if there's a quick and dirty way to transpose all my FVWM2 menus to the menu popping up on the Home icon when I hit the menu key. Anyone else ever made this move? I think I like some of what I'm seeing, but I'm not sure I want to relearn my whole UI just yet. I'd probably be more likely to just update the backgrounds and look for some new window candy for FVWM before I learn a new UI. BTW, If I go back to FVWM, is there anything saying I can't use Konqueror? And I wonder if there are extensions for it like those available for Firefox? Thanks in advance. Lou -- Louis LeBlanc FreeBSD-at-keyslapper-DOT-net Fully Funded Hobbyist, KeySlapper Extrordinaire :) Please send off-list email to: leblanc at keyslapper d.t net Key fingerprint = C5E7 4762 F071 CE3B ED51 4FB8 AF85 A2FE 80C8 D9A2 It is much easier to suggest solutions when you know nothing about the problem. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How do I re-format 'dangerously dedicated' drive?
Hi all, I don't have an MS-DOS floppy, and I think my CDROM isn't booting because the HD is 'dangerously dedicated,' even though it is a bootable CD and the BIOS is set to boot it first. Since it is set to boot the HD first and it has a boot sector, the BIOS doesn't want to get by that. So, you want to go in to the BIOS and reconfigure it to put the CD boot in front of the HD. Then you can either completely reinstall the most recent FreeBSD or use the fisit to rebuild something on that disk. The key thing is to have both floppy and CD in the boot order before the Hard Disk. Change that only if you really need to. jerry I want to totally clear my drive so I can reinstall from scratch from CDROM. How can I do this? jm -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How do I re-format 'dangerously dedicated' drive?
Just to make sure. You are using medias that your CD-ROM can read. I once almost ripped my hair of when I couldn't get an old machine to boot from cd. At the time I was using CD-RW medias and the drive was not able to read them. So if you are using CD-RW try a CD-R. Mats Hellman On 11/21/05, Jerry McAllister [EMAIL PROTECTED] wrote: Hi all, I don't have an MS-DOS floppy, and I think my CDROM isn't booting because the HD is 'dangerously dedicated,' even though it is a bootable CD and the BIOS is set to boot it first. Since it is set to boot the HD first and it has a boot sector, the BIOS doesn't want to get by that. So, you want to go in to the BIOS and reconfigure it to put the CD boot in front of the HD. Then you can either completely reinstall the most recent FreeBSD or use the fisit to rebuild something on that disk. The key thing is to have both floppy and CD in the boot order before the Hard Disk. Change that only if you really need to. jerry I want to totally clear my drive so I can reinstall from scratch from CDROM. How can I do this? jm -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Quick high availability load balancer for freebsd
I need a quick tip on setting up a High availability load balancer in freebsd. Here is our current setup: we have a cisco router, and a class B network. All of those who acquired ipaddresses cannot pass through the router if destined to port 80. The router only allow 3 ip addresses to browse the web. Those three machines are the parent proxies. Now 2 other machines on the same switch acts as high availability, load balancer. It is currently running an old version of redhat, heartbeat, and ldirector. The router doesn't enforce all traffic destined to port 80 to go through the load balancer first. some web clients uses the virtual ip of the load balancer and thus being diverted to the right proxy(not heavily loaded) while some, uses goes directy to the parent proxies. On the setup I am planning, this is not yet a concern.. I just have to achieve the same setup in freebsd because those 2 load balancers are old and retiring. I'm looking at freevrrpd and pen at this site: http://redundancy.redundancy.org/fbsd_lb.html I need some more tips however. How will you compare this setup to the Linux HA. Any link or quick guide will be greatly appreciated. Thanks. __ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: linuxpluginwrapper (was linuxflashplugin)
On Sunday 20 November 2005 05:11 pm, Nicolas Blais wrote: On November 20, 2005 09:02 pm, Beecher Rintoul wrote: Sorry...Imeant to say pluginwrapper. I accidently did a portupgrade on linuxpluginwrapper. That went ok, but now I have no plugins in firefox, either in /usr/X11R6/lib/browser_plugins or anywhere else I have found. Any ideas on how to fix this. All of the other ports are installed. Libmap.conf is properly installed. Beech What happens when you : cd /usr/X11R6/lib/browser_plugins ln -s /usr/X11R6/lib/linux-flashplugin6/flashplayer.xpt ln -s /usr/X11R6/lib/linux-flashplugin6/libflashplayer.so and so on? Nicolas. Actually I just figured it out. There's a WITH_PLUGINS knob in the port makefile that I don't remember from before. Now it links plugins. One problem though, it puts them in browser_linux_plugins which native firefox doesn't see. I relinked them into browser_plugins and now it works again. realplayer still doesn't work, but that's an old problem. Looks like that port is a bit broken so I'll fire the maintainer an email. Thanks for the reply, Beech --- Beech Rintoul - System Administrator - [EMAIL PROTECTED] /\ ASCII Ribbon Campaign | NorthWind Communications \ / - NO HTML/RTF in e-mail | 201 East 9th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ --- pgpRksaveIaAn.pgp Description: PGP signature
copy paste troubles
Hi. Running 5.4 stable here. I have an annoying problem with my copy paste. When I copy something from an xterm and paste it into an X app the string appears in the middle of a previously copied string made from within an X app. Example: I copy http://freshmeat.com/; from Firefox and then postfix from my xterm. Pasting in my xterm gives me postfix but pasting in Firefox gives me http://freshmeat.cpostfixom/;. Any ideas? -- Peter __ Find your next car at http://autos.yahoo.ca ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
streaming windows media
Are there any good media players in the ports that will do streaming windows media. If so what would you guys recommend? I'd like to get away from realplayer. TIA Beech --- Beech Rintoul - System Administrator - [EMAIL PROTECTED] /\ ASCII Ribbon Campaign | NorthWind Communications \ / - NO HTML/RTF in e-mail | 201 East 9Th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ --- pgpcsyFHR3RIB.pgp Description: PGP signature
Root powerless?
i have a very strange problem with a freebsd server running 5.3-RELEASE with apache and mysql. something has happened to root. it does not make sense to me since nothing has changed that i am aware of. any idea at all would be very hepful. the output below show what is happening. i included the output from su since that is also strange. thankyou for any help. Brooke srv-0021# w 2:33AM up 1:57, 1 user, load averages: 0.00, 0.00, 0.00 USER TTY FROM LOGIN@ IDLE WHAT root p0 192.168.36.2 2:33AM - w srv-0021# shutdown -r now shutdown: NOT super-user srv-0021# su -l peterf su: setusercontext: Operation not permitted _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Root powerless?
Brooke Landers wrote: srv-0021# w 2:33AM up 1:57, 1 user, load averages: 0.00, 0.00, 0.00 USER TTY FROM LOGIN@ IDLE WHAT root p0 192.168.36.2 2:33AM - w as root: id [EMAIL PROTECTED] ~]# id uid=0(root) gid=0(wheel) groups=0(wheel), 5(operator) you should have uid=0 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Root powerless?
[EMAIL PROTECTED] ~]# id uid=0(root) gid=0(wheel) groups=0(wheel), 5(operator) you should have uid=0 hello Richard. thank you for the help. heres what i get srv-0021# id uid=0(root) gid=0(wheel) groups=0(wheel), 5(operator) /etc/passwd and group look normal too. everything else is running ok. _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: streaming windows media
On Sun, 20 Nov 2005, Beecher Rintoul wrote: Are there any good media players in the ports that will do streaming windows media. If so what would you guys recommend? I'd like to get away from realplayer. From ports: try multimedia/mplayer. You'd also need www/mplayer-plugin if you wanted to play WM files from web sites. HTH. -- Chris Hill [EMAIL PROTECTED] ** [ Busy Expunging | ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Procedure for upgrading CPU
I'm thinking of upgrading the CPU in my machine running 6.0-RELEASE with an SMP kernel. Is it a matter of powering down the machine, swapping chips and powering up? Is there anything else I would need to do ahead of time or after the upgrade? Will I need to recompile world, kernel or ports? I currently have a 2.8 GHz P4 Prescott (520) and I'm thinking of replacing it with a 3.6 GHz P4 Prescott (560J). Both are 32 bit LGA 775 chips. The motherboard is a SuperMicro P8SGA. -- Mike Loiterman grantADLER Tel: 630-302-4944 Fax: 773-442-0992 Email: [EMAIL PROTECTED] PGP Key: 0xD1B9D18E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Root powerless?
On Sun, 2005-11-20 at 20:50 -0800, Brooke Landers wrote: [EMAIL PROTECTED] ~]# id uid=0(root) gid=0(wheel) groups=0(wheel), 5(operator) you should have uid=0 hello Richard. thank you for the help. heres what i get srv-0021# id uid=0(root) gid=0(wheel) groups=0(wheel), 5(operator) /etc/passwd and group look normal too. everything else is running ok. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] I don't know if it will help, but you might try `su -' to get a full root login. There may be a difference in your environment. Below is my reasoning. ``su'' issued by unpriveleged user in group wheel: [0] yak$ id uid=1001(bouy) gid=0(wheel) groups=0(wheel) [0] yak$ su Password: [0] yak# echo $USER == EUID unless target is root (0) bouy == [0] yak# id uid=0(root) gid=0(wheel) groups=0(wheel), 5(operator) [0] yak# exit exit ``su -'' issued by unpriveleged user in group wheel: [0] yak$ su - Password: [0] yak# echo $USER == EUID unless target is root (0) root == [0] yak# id uid=0(root) gid=0(wheel) groups=0(wheel), 5(operator) [0] yak# exit logout [0] yak$ man su Note the difference in the USER environment variable. The following code exists in the shutdown command, therefore the error appears to be that of a non-zero EUID. #ifndef DEBUG if (geteuid()) errx(1, NOT super-user); #endif This makes sense considering a normal `su' does not change the EUID as stated in the man page = USER is set to the target login, unless the target login has a user ID of 0, in which case it is unmodified. Hope this helps -- Mike Eubanks [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Should I have 2 copies of OpenSSL?
Justin Meyer wrote: Hi Russell! On Fri, 18 Nov 2005, Russell E. Meek wrote: Justin Meyer wrote: What gives? Is the way things should be? Or did I foul something up somewhere along the way through my upgrades? If I did mess something up, what should I do to fix it? Justin, How about trying this, you have the most recent version of openssl installed in base due to the upgrade to 6.0 - release. If you have the OpenSSL port installed why don't you uninstall the port and place the following in your /etc/make.conf file WITH_OPENSSL_BASE=yes This will force all ports you install going foward to use the base install of OpenSSL and not to install OpenSSL as a dependency from ports. You could then make deinstall, make install clean make distclean any port that requires OpenSSL, Ruby for instance. This should make it build with the base install, eliminating the version conflict. That seems to have done the trick, Russell; the script works again! Thank you very much for the suggestions :) No problem, anytime ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Asterisk on FreeBSD, anyone?
On 11/20/05 00:21 Kiffin Gish said the following: Has anyone had any experience running Asterisk on FreeBSD 5.x ? If so, then which drivers are required and what is the best way to install the system? you can build asterisk, libpri and zaptel from the ports and reports on the asterisk-bsd mailing lists seem to indicate that it works fine. -- Regards, /\_/\ All dogs go to heaven. [EMAIL PROTECTED](0 0)http://www.alphaque.com/ +==oOO--(_)--OOo==+ | for a in past present future; do| | for b in clients employers associates relatives neighbours pets; do | | echo The opinions here in no way reflect the opinions of my $a $b. | | done; done | +=+ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Which firewall?
On 11/17/05 21:21 Sasa Stupar said the following: --On 17. november 2005 18:19 +0800 Dinesh Nair [EMAIL PROTECTED] wrote: it's a freebsd 4.11 based system with a nice UI. Hmmm, this looks interesting. and there's now an ALPHA release based on freebsd 6.0-RELEASE. one thing we've noticed though is a tremendous drop in network performance between 4.x and 6.0. on 4.x with the soekris net4801, we're getting 38Mbps throughput between both interfaces, but this drops to 20Mbps when 6.0 is used. this is a clear apples to apples comparison with the only thing changing being the base OS. -- Regards, /\_/\ All dogs go to heaven. [EMAIL PROTECTED](0 0)http://www.alphaque.com/ +==oOO--(_)--OOo==+ | for a in past present future; do| | for b in clients employers associates relatives neighbours pets; do | | echo The opinions here in no way reflect the opinions of my $a $b. | | done; done | +=+ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: streaming windows media
On Mon, 2005-11-21 at 00:48 -0500, Chris Hill wrote: On Sun, 20 Nov 2005, Beecher Rintoul wrote: Are there any good media players in the ports that will do streaming windows media. If so what would you guys recommend? I'd like to get away from realplayer. From ports: try multimedia/mplayer. You'd also need www/mplayer-plugin if you wanted to play WM files from web sites. HTH. Have you looked at audio/icecast2. SHOUTcast also claims to run on FreeBSD, although, it isn't in the ports collection. http://www.icecast.org/ - ports/audio/icecast2 -- Mike Eubanks [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]