Hi all,
I am from Linux (Debian & Ubuntu) and I will have to intensively use
FreeBSD on servers (DNS, Database, Routing...)
I would like to install a FreeBSD on my laptop (Dell Inspiron, or some
Asus not defined yet) and then virtualize a lot (KVM seems OK) in order
to get used.
For the in
Big thanks! I'll stop on carp and devd!
I think such example (from your link) must be in handbook. Because it's good
native solution from base system.
Or at least link from carp section to devd section.
Who do I need to write with this idea?
2011/8/23 Vincent Hoffman
> On 23/08/2011 17:21, Pavel
On 8/23/2011 7:22 PM, jh...@socket.net wrote:
> I have run into a weird situation, and I do not know if the problem lies
> on my side of the connection or my vendors.
>
> The tunnel comes up only after the vendor sends traffic to me. My side of
> the tunnel shows up and using tcpdump, I see pa
I have run into a weird situation, and I do not know if the problem lies
on my side of the connection or my vendors.
The tunnel comes up only after the vendor sends traffic to me. My side of
the tunnel shows up and using tcpdump, I see packets flowing out the
correct interface, to the correct
On 23 Aug 2011 21:42, "Morse, Richard E.MGH" wrote:
>
> On Aug 23, 2011, at 4:01 PM, Chris Rees wrote:
>
> > "Morse, Richard E.MGH" wrote:
> >> GID_FILES="/usr/ports/OP_GROUP" UID_FILES="/usr/ports/OP_USER"
> >> AMANDA_USER="operator" AMANDA_GROUP="operator" make install
> >>
> >> This runs
On Aug 23, 2011, at 4:01 PM, Chris Rees wrote:
> "Morse, Richard E.MGH" wrote:
>> GID_FILES="/usr/ports/OP_GROUP" UID_FILES="/usr/ports/OP_USER"
>> AMANDA_USER="operator" AMANDA_GROUP="operator" make install
>>
>> This runs along for a while, then dies with the note:
>>
>> ** /usr/po
Please CC me in replies, this was passed on to me by someone subscribed.
"Morse, Richard E.MGH" wrote:
> Hi! I'm trying to upgrade my Amanda installation from a v2.6 to v3.2 via
> ports. I had configured Amanda previously to be installed as the user
> `operator`. The upgraded version wants to ins
On Tue, Aug 23, 2011 at 07:20:32PM +, Morse, Richard E.MGH thus spake:
Hi! I'm trying to upgrade my Amanda installation from a v2.6 to v3.2 via ports.
I had configured Amanda previously to be installed as the user `operator`. The
upgraded version wants to install as the user `amanda`; howev
Hi! I'm trying to upgrade my Amanda installation from a v2.6 to v3.2 via ports.
I had configured Amanda previously to be installed as the user `operator`. The
upgraded version wants to install as the user `amanda`; however this presents
all kinds of problems:
- the `amanda` user has no h
[1]Lloyds TSB homeBank Secure Logo
Dear customer,
Lloyds TSB is constantly working to ensure security by regularly
screening the accounts in our system.
Your personal data is incomplete. We recommend that you update your
Lloyds TSB account for sec
On 23/08/2011 17:21, Pavel Timofeev wrote:
> Oh, thank you very much!
> I didn't know about ifstated. I'll try it.
>
>> Also may be with devd
> How? What do you mean?
devd is the freebsd device state change daemon, it will track device
state changes and you can tell it to act on them.
A quick googl
> From l...@larseighner.com Tue Aug 23 07:33:23 2011
> Date: Tue, 23 Aug 2011 07:31:50 -0500 (CDT)
> From: Lars Eighner
> To: Robert Bonomi
> Cc: freebsd-questions@freebsd.org
> Subject: Re: What dialup modem WILL work with 8.x and uart?
>
> On Mon, 22 Aug 2011, Robert Bonomi wrote:
>
> >> From:
On 23/08/2011 16:26, Paul Schenkeveld wrote:
> Thanks for the pointers on how to set up my own build servers for
> freebsd-update but I'm not really interested in building locally, I
> just want to mirror the releases and patches that we're interested in
> locally and point freebsd-update at my loc
Oh, thank you very much!
I didn't know about ifstated. I'll try it.
> Also may be with devd
How? What do you mean?
2011/8/23 Patrick Lamaiziere
> Le Tue, 23 Aug 2011 17:50:43 +0400,
> Pavel Timofeev a écrit :
>
> Hello,
>
> > Can carp(4) run daemons or scripts when backup server come into the
On Tue, 23 Aug 2011, Paul Schenkeveld wrote:
On Fri, Aug 19, 2011 at 04:10:30PM +0200, Paul Schenkeveld wrote:
Hi,
Is it possible to fetch files needed for freebsd-update once and put
them on a local fileserver to update many machines?
Thanks for the pointers on how to set up my own build se
Le Tue, 23 Aug 2011 17:50:43 +0400,
Pavel Timofeev a écrit :
Hello,
> Can carp(4) run daemons or scripts when backup server come into the
> work? As I know ucarp and heartbeat can do this.
No, carp only works at the interface level. In ports you will find
ifstated(8) (from OpenBSD). It can reac
On Fri, Aug 19, 2011 at 04:10:30PM +0200, Paul Schenkeveld wrote:
> Hi,
>
> Is it possible to fetch files needed for freebsd-update once and put
> them on a local fileserver to update many machines?
Thanks for the pointers on how to set up my own build servers for
freebsd-update but I'm not reall
Can carp(4) run daemons or scripts when backup server come into the work?
As I know ucarp and heartbeat can do this.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail t
On 8/21/2011 12:34 PM, Lars Eighner wrote:
>
> Since uart in 8.x will not support my PCI 3com hardware modem (as FreeBSD
> sio has since 4.x) and my PR is gathering dust, before I buy any more
> coaster sets from osdisc.com, it behooves to ask if there are any dialup
> modems that 8.x uart actuall
On Mon, 22 Aug 2011, Robert Bonomi wrote:
From: Lars Eighner
That's why I sprang for the 3Com which WAS supported by sio for years and is
NOT supported by uart since 8.x. Why it is this device could be supported
for so many years, but somehow it is impossible on 8.x?
The answer is "becaus
On 08/23/11 11:11, Stanislav Sedov wrote:
Are you sure you have the latest one (2.4.9.2_2,2).
If not, you can grab it from here:
http://www.freebsd.org/cgi/cvsweb.cgi/ports/ports-mgmt/portupgrade/ (the page has a small
"download as a tarball" link
at the bottom).
You are right: I had just "c
This ruby+portupgrade upgrade seems to be quite a mess. My systems
fetch new ports tree nightly and I upgrade during the day when I have
some spare time.
So, this morning my systems had the new ruby versions
and the UPDATING instruction, but not the new portupgrade port version
(not that it h
On 08/23/11 10:24, Polytropon wrote:
On Sat, 20 Aug 2011 23:13:32 -0500, Jorge Biquez wrote:
Seriously I would like to see or hear about the comparison chart
between all OSs. And a question arrive to my mind... if for some
reason, I know it is impossible, but if for some reason FreeBSD would
sto
On Tue, 23 Aug 2011 11:00:48 +0200
Andrea Venturoli mentioned:
> On 08/23/11 09:58, Stanislav Sedov wrote:
> > On Sun, 21 Aug 2011 15:18:28 +0200
> > Andrea Venturoli mentioned:
> >
> >> On 08/21/11 08:26, n dhert wrote:
> >>> I did a portupgrade on a freebsd 8.2-RELEASE
> >>> of the portupgrade
On 08/23/11 09:58, Stanislav Sedov wrote:
On Sun, 21 Aug 2011 15:18:28 +0200
Andrea Venturoli mentioned:
On 08/21/11 08:26, n dhert wrote:
I did a portupgrade on a freebsd 8.2-RELEASE
of the portupgrade program itself
portupgrade-2.4.8_1,2< needs updating (index has 2.4.9,2)
(that upgrade
Allow me some short :-) comments.
On Sun, 21 Aug 2011 16:18:50 -0400, Alejandro Imass wrote:
> Disagree. I've worked with FreeBSD since 6.2 and it's only been
> getting better and better. FreeBSD is getting faster and better whilst
> Linux really seems to have drifted from direction like you say.
On Sat, 20 Aug 2011 23:13:32 -0500, Jorge Biquez wrote:
> Seriously I would like to see or hear about the comparison chart
> between all OSs. And a question arrive to my mind... if for some
> reason, I know it is impossible, but if for some reason FreeBSD would
> stop existing... serious users o
>I had an opportunity to upgrade a server from freebsd 8.1 to 8.2 since
>it had to be restarted any way. I upgraded it with freebsd-update and
>compiled a custom kernel with no problem. However I haven't been able to
>find a procedure for updating jails when they've been setup with ezjail.
>I did '
On Sun, 21 Aug 2011 15:18:28 +0200
Andrea Venturoli mentioned:
> On 08/21/11 08:26, n dhert wrote:
> > I did a portupgrade on a freebsd 8.2-RELEASE
> > of the portupgrade program itself
> > portupgrade-2.4.8_1,2 > (that upgraded also ruby to 1.9:
>
> I di
29 matches
Mail list logo