Dear fellow FreeBSD users,
I have installed FreeBSD 8.0 and updated it to current p2
I try to use konqueror and I get
There was an error loading the module About-Page for Konqueror.
The diagnostics is:
Cannot load library /usr/local/kde4/lib/kde4/konq_aboutpage.so:
(Shared object libjpeg.so.10
Ion-Mihai,
Does this fix the following issue?
I have installed FreeBSD 8.0 and updated it to current p2
I try to use konqueror and I get
There was an error loading the module About-Page for Konqueror.
The diagnostics is:
Cannot load library /usr/local/kde4/lib/kde4/konq_aboutpage.so:
Terminated
What should I do in this case?
Thanks,
Antonio
On Mon, Apr 5, 2010 at 2:31 PM, Garrett Cooper yanef...@gmail.com wrote:
On Mon, Apr 5, 2010 at 12:05 PM, Antonio Olivares
olivares14...@gmail.com wrote:
Ion-Mihai,
Does this fix the following issue?
I have installed FreeBSD 8.0
On Wed, Apr 7, 2010 at 7:36 AM, Ion-Mihai Tetcu ite...@freebsd.org wrote:
On Wed, 7 Apr 2010 07:20:47 -0500
Antonio Olivares olivares14...@gmail.com wrote:
[ .. ]
=== Port directory: /usr/ports/sysutils/fusefs-kmod
=== This port is marked IGNORE
=== requires the userland
On 4/8/10, Programmer In Training p...@joseph-a-nagy-jr.us wrote:
I have acquired a pair of Compaq USB /powered/ speakers. On my parents
XP machine they don't seem to cause any problems, but when I hook it up
to listen on my FreeBSD box I have absolutely nothing but problems with
the speakers
There are several you may try:
http://www.ghostbsd.org/
http://frenzy.org.ua/en/
http://distrowatch.com/search.php?category=BSDorigin=Allbasedon=FreeBSDdesktop=Allarchitecture=Allstatus=Active
Hope this helps,
Antonio
On 4/12/10, 丁少衡 dshbusin...@gmail.com wrote:
Hello, everyone,
I want
Dear folks,
As I was trying to get out of the other mess that I got into. See thread:
Attachment Re: [ HEADS UP ] Ports unstable for the next 10 day
I have encountered thread subject. i had kde, and kde could not
find it, so I removed KDE and then have added gnome both ways:
pkg_add
worked apparently except KDE and/or
GNOME :(
Thanks,
Antonio
On 4/15/10, Anton Shterenlikht me...@bristol.ac.uk wrote:
On Thu, Apr 15, 2010 at 06:49:31PM -0500, Antonio Olivares wrote:
Dear folks,
As I was trying to get out of the other mess that I got into. See thread:
Attachment Re
-2.26.2_1
The ports system report gnome 2.28 while this points to 2.26, is there
anything I can try?
Regards,
Antonio
On 4/15/10, Anton Shterenlikht me...@bristol.ac.uk wrote:
On Thu, Apr 15, 2010 at 07:11:24PM -0500, Antonio Olivares wrote:
I have rebuilt everything from scratch ran
Dear FreeBSD experts,
There has been something that I find hard to do, I would like to find
a CTRL + KEY combination, or ALT + KEY combination to input special
characters like (ñ) [ALT + 164 or ALT + 0241 in Mr. Gates OS].
http://www.forlang.wsu.edu/help/keyboards.asp
accents other symbols
On Sat, Mar 12, 2011 at 3:43 PM, Polytropon free...@edvax.de wrote:
On Sat, 12 Mar 2011 14:07:59 -0600, Antonio Olivares
olivares14...@gmail.com wrote:
Dear FreeBSD experts,
There has been something that I find hard to do, I would like to find
a CTRL + KEY combination, or ALT + KEY
Chad all,
On Sat, Mar 12, 2011 at 5:24 PM, Chad Perrin per...@apotheon.com wrote:
On Sat, Mar 12, 2011 at 02:07:59PM -0600, Antonio Olivares wrote:
Dear FreeBSD experts,
There has been something that I find hard to do, I would like to find
a CTRL + KEY combination, or ALT + KEY combination
Dear Manolis,
Sorry to ask but are there any releases for 8.2 in the works?
http://freebsd-custom.wikidot.com/
I have checked here:
http://freebsd-custom.wikidot.com/downloads-page
but it stil points to 8.1 release. I have an 8.1 version running
beautifully thanks to you and all the members
Alokat,
On Fri, Mar 18, 2011 at 2:04 PM, Alokat mail...@alokat.org wrote:
Hi,
I have successfully installed FreeBSD on my x300 but I have some driver
problems.
Does someone know how to figure out which driver I need for the sound and
the wlan card?
For the sound^{1}, try loading the
$ su -
Dear FreeBSD experts,
I wanted to install gkrellm2 and I get the following error.
grullahighschool# cd /usr/ports/sysutils/
grullahighschool# cd gkrellm2
grullahighschool# pwd
/usr/ports/sysutils/gkrellm2
grullahighschool# make install clean
=== gkrellm-2.3.4_3 is marked as broken: GnuTLS and
On Sat, Mar 12, 2011 at 5:24 PM, Chad Perrin per...@apotheon.com wrote:
On Sat, Mar 12, 2011 at 02:07:59PM -0600, Antonio Olivares wrote:
Dear FreeBSD experts,
There has been something that I find hard to do, I would like to find
a CTRL + KEY combination, or ALT + KEY combination to input
On Mon, Mar 21, 2011 at 12:27 PM, David Demelier
demelier.da...@gmail.com wrote:
On 21/03/2011 16:57, Antonio Olivares wrote:
Dear FreeBSD experts,
I wanted to install gkrellm2 and I get the following error.
grullahighschool# cd /usr/ports/sysutils/
grullahighschool# cd gkrellm2
On Mon, Mar 21, 2011 at 2:08 PM, Daniel C. Dowse dcdo...@gmx.net wrote:
On Mon, 21 Mar 2011 12:45:40 -0500, Antonio Olivares
olivares14...@gmail.com
wrote:
[snip]
On the other hand with conky, I get error
[olivares@grullahighschool ~]$ conky -C ~/.conkyrc
[olivares@grullahighschool
It's the same with computers. No matter what you want to do
with it, there IS something you need to learn, either BEFORE
you use it, or WHILE you're using it. With some simple means,
i. e. using the brain, reading, concluding, understanding,
THINKING, you're fine in this regards - because
On Thu, Mar 31, 2011 at 1:19 PM, Gary Dunn knowt...@aloha.com wrote:
Adam Vande More amvandem...@gmail.com wrote:
On Wed, Mar 30, 2011 at 9:06 PM, Gary Dunn knowt...@aloha.com wrote:
When will we bump the version of gcc? On my fresh 8.2 build it is
4.2.1.
The ports tree has newer, up to 4.7.0
Dear folks,
On a new machine running AMD-64 XFCE custom by Manolis, I can't
determine which sound driver to use for the sound card:
grulla# kldload snd_driver
grulla# cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: HDA VIA VT1708B_1 PCM #0 Analog
On Mon, Apr 18, 2011 at 9:32 AM, Craig Butler
craig...@lerwick.hopto.org wrote:
On Mon, 2011-04-18 at 08:40 -0500, Antonio Olivares wrote:
Dear folks,
On a new machine running AMD-64 XFCE custom by Manolis, I can't
determine which sound driver to use for the sound card:
grulla# kldload
On Mon, Apr 18, 2011 at 9:32 PM, Polytropon free...@edvax.de wrote:
On Mon, 18 Apr 2011 20:53:41 -0500, Antonio Olivares
olivares14...@gmail.com wrote:
Apparently it works, but I put in some small speakers, but could not
get music to play.
On some machines, speakers do not activate
This MAY be a codec problem. You can try the following:
First mount the DVD (cd_9660), then use mplayer on one
of the VOB files directly. Choose one of the bigger
files for this test, and maybe use mplayer's -v option
to get an idea what may be wrong - the program should
tell you about this.
So you can exclude media error.
Maybe this diagnostic script from my outbox can
help you to track down the error. It has been made
on 7-STABLE i386 with mplayer-0.99.11_3 - a quite
old system. See if the steps described here can be
reproduced on your system in a similar way.
***
Dear folks,
Can't play a dvd :(
I have installed vlc from ports, it gives:
Your input can't be opened:
VLC is unable to open the MRL 'dvd:///dev/acd0'. Check the log for details.
[olivares@grulla ~]$ mplayer dvd://
MPlayer SVN-r32577-snapshot-4.2.1 (C) 2000-2010 MPlayer Team
Playing dvd://.
On Thu, Apr 21, 2011 at 9:55 PM, Polytropon free...@edvax.de wrote:
On Thu, 21 Apr 2011 07:38:57 -0500, Antonio Olivares
olivares14...@gmail.com wrote:
Tried to mount the dvd, but sadly the system rebooted and I had to
fsck three to 4 times to get the system back :(, I will try
Dear kind folks,
Is there an easy firewall setup available somewhere(like the one
referenced below but for FreeBSD)?
i.e, like I saw reading in Distrowatch an easy way(using a page on the
net: http://connie.slackware.com/~alien/efg/)
I have read that there is pf and there is an implementation
On Mon, Apr 25, 2011 at 9:06 PM, Daniel Staal dst...@usa.net wrote:
--As of April 25, 2011 7:43:33 PM -0500, Antonio Olivares is alleged to have
said:
I don't know which one to use, is there a page, howto (build a
firewall or convert an existing one) to use here? All I want is to be
allowed
at 1:48 PM, Karl Vogel vogelke+u...@pobox.com wrote:
On Mon, 25 Apr 2011 19:43:33 -0500,
Antonio Olivares olivares14...@gmail.com said:
A Is there an easy firewall setup available somewhere (like the one
A referenced below but for FreeBSD)?
Here's a script you can use to generate a rules file
On Fri, Apr 29, 2011 at 1:57 AM, Dino Vliet dino_vl...@yahoo.com wrote:
Dear freebsd userlist,
here an application type of question. I have two pdf files and want to make 1
out of them by concatenating them. Does anyone have an idea how to do that on
unix/linux as I don't have the pdf editor
On Mon, May 2, 2011 at 6:25 PM, Riack Raacvöejaמיכלאנג'לו
saacnor...@gmail.com wrote:
Hi,
I installed PC-BSD 8.2 (FreeBSD 8.2) in my laptop,
I would like to know, How to remove KDE
and How to install
Gnome from shell.
http://www.freebsd.org/gnome/docs/faq2.html
But since you are using
Dear all,
I was running FreeBSD 8.1 and am in the process of updating it
following advice in handbook:
http://www.freebsd.org/doc/handbook/updating-upgrading-freebsdupdate.html
ran
# freebsd-update fetch
# freebsd-update install
# portupgrade -af
# freebsd-update -r 8.2-RELEASE upgrade
then
On Thu, May 5, 2011 at 6:33 PM, Polytropon free...@edvax.de wrote:
On Thu, 5 May 2011 17:50:28 -0500, Antonio Olivares olivares14...@gmail.com
wrote:
Tried to do this:
# portupgrade -f ruby
# rm /var/db/pkg/pkgdb.db
# portupgrade -f ruby18-bdb
# rm /var/db/pkg/pkgdb.db /usr/ports/INDEX
something to keep in mind portmaster does the same thing and all of
portupgrades switches work with portmaster, the only significant difference
is that portmaster will run through and prompt you for all of the 'make
config' options first and then go about it's business unattended from
On Thu, May 5, 2011 at 8:04 PM, Frank Shute fr...@shute.org.uk wrote:
On Thu, May 05, 2011 at 05:50:28PM -0500, Antonio Olivares wrote:
Dear all,
I was running FreeBSD 8.1 and am in the process of updating it
following advice in handbook:
http://www.freebsd.org/doc/handbook/updating
On Thu, May 5, 2011 at 8:04 PM, Frank Shute fr...@shute.org.uk wrote:
On Thu, May 05, 2011 at 05:50:28PM -0500, Antonio Olivares wrote:
Dear all,
I was running FreeBSD 8.1 and am in the process of updating it
following advice in handbook:
http://www.freebsd.org/doc/handbook/updating
Any suggestions to start over and get this done in a more efficient
manner. Thinking of nuking OpenOffice
Done:)
grullahighschool# cd openoffice.org-3
grullahighschool# ls
Makefiledistinfofiles pkg-descr pkg-plist
grullahighschool# make deinstall
===
On Thu, May 5, 2011 at 8:37 PM, Warren Block wbl...@wonkity.com wrote:
On Thu, 5 May 2011, Antonio Olivares wrote:
Dear all,
I was running FreeBSD 8.1 and am in the process of updating it
following advice in handbook:
http://www.freebsd.org/doc/handbook/updating-upgrading
On Fri, May 6, 2011 at 12:14 PM, Warren Block wbl...@wonkity.com wrote:
On Fri, 6 May 2011, Antonio Olivares wrote:
This is what I am running now ATM
# cd /usr/ports/
# make clean build deinstall install
Will it install all the ports? or only the ones that are installed?
It's going
On Fri, May 6, 2011 at 12:09 PM, Polytropon free...@edvax.de wrote:
On Fri, 6 May 2011 11:36:07 -0500, Antonio Olivares olivares14...@gmail.com
wrote:
This is what I am running now ATM
# cd /usr/ports/
# make clean build deinstall install
Will it install all the ports? or only the ones
Warren,
Sorry to ask, but what does one run after we run
# portmaster -na
I have cleared all questions and am ready to update, what magical
command will do it?
Thanks,
Antonio
On Fri, May 6, 2011 at 12:54 PM, Warren Block wbl...@wonkity.com wrote:
On Fri, 6 May 2011, Polytropon wrote:
On Fri, May 6, 2011 at 1:52 PM, Antonio Olivares
olivares14...@gmail.com wrote:
Warren,
Sorry to ask, but what does one run after we run
# portmaster -na
I have cleared all questions and am ready to update, what magical
command will do it?
Thanks,
Antonio
On Fri, May 6, 2011 at 12:54
On Fri, May 6, 2011 at 8:43 PM, Warren Block wbl...@wonkity.com wrote:
On Fri, 6 May 2011, Antonio Olivares wrote:
On Fri, May 6, 2011 at 1:52 PM, Antonio Olivares
Sorry for TOP POSTING :(, but do I run
# portmaster -a -f -D
and do an in place update of all ports?
is this the recommended
On Fri, May 6, 2011 at 9:59 PM, Antonio Olivares
olivares14...@gmail.com wrote:
On Fri, May 6, 2011 at 8:43 PM, Warren Block wbl...@wonkity.com wrote:
On Fri, 6 May 2011, Antonio Olivares wrote:
On Fri, May 6, 2011 at 1:52 PM, Antonio Olivares
Sorry for TOP POSTING :(, but do I run
Dear kind FreeBSD users,
I have a dilemma, I have a collection of songs in mp3 form from old
cd's that I ripped. Sadly, the mp3s can play but with a screeching
sound :(. I have confirmed that by converting the mp3's to ogg vorbis
format, the screeching sound is lost. So I have decided to
I'd like to add to this that, in my opinion, the real issue these days is
the emailing of unencrypted business papers. I take the position that
*nothing* is ever deleted from an email server these days; or from those
servers that are just relaying, no matter what the RFC says. I shake my head
On Sat, May 7, 2011 at 4:03 PM, Chris Hill ch...@monochrome.org wrote:
On Sat, 7 May 2011, Antonio Olivares wrote:
My question is the following:
How can I run the script to recursively find all mp3's and convert them to
ogg vorbis(with ogg extension already in place/or rename them in one
Dear folks,
On my system that I have updated to 8.2-RELEASE-amd64 I get mistake if I try to
# pkg_add -r firefox
pkg_add: package 'perl-5.10.1_3.tbz... Done.
pkg_add: package 'perl-5.10.1_3.tbz conflicts with perl-5.12.3
pkg_add: please use pkg_delete first to remove conflicting package(s)
or
There's also ee in the base system, which is good enough for editing
configuration files, and is much easier for a casual user. The benefits
of vi and emacs are mostly for developers.
It's not just for software development. I use Vim for writing code, but
I also use it for writing in
startx command not found :(, no bash
ran
# pkg_add -r bash
# pkg_add -r xfce4
did not succeed, now ran to ports
# cd /usr/ports/x11-wm/xfce4
# make install clean
and am stuck here. Hopefully this gets me back on my feet.
Otherwise, it has been a big exercise :) and definitely I will
Roelof,
On Tue, May 10, 2011 at 2:44 AM, Roelof Wobben r.wob...@home.nl wrote:
Hello,
Nobody who can help me.
Roelof
Op 9-5-2011 9:03, Roelof Wobben schreef:
Hello,
I have two disks, one of 80G with Win7, and one of 60G with at this moment
Opensuse and Minix.
Now I want to switch
Dear folks,
I have recently successfully updated an amd 64 bit machine from 8.1 to
8.2 release and reinstalled most of the previously installed ports.
Now, I tried to use my usb disk and it is not automounting :( I like
the convenience of automounting and I checked hal and dbus and they
are both
On Thu, May 12, 2011 at 7:33 PM, Antonio Olivares
olivares14...@gmail.com wrote:
Dear folks,
I have recently successfully updated an amd 64 bit machine from 8.1 to
8.2 release and reinstalled most of the previously installed ports.
Now, I tried to use my usb disk and it is not automounting
Xn Nooby,
On Sun, May 22, 2011 at 5:35 AM, Xn Nooby xno...@gmail.com wrote:
I'm a struggling nooby. I am trying to install firefox 4 on a fresh
8.2 installation. I want to the core system to track the errata
branch, and get binary packages from 8-stable (which has firefox 4).
I installed
Dear folks,
I have a machine that was working fine with a flat panel monitor at
work. I brought the machine home to connect to a TV with PC input and
I get Out of Range message. X does not start. This same machine has
autologin setup so after I start it up and X fails to load, I switch
On Sun, May 29, 2011 at 12:56 AM, Warren Block wbl...@wonkity.com wrote:
On Sat, 28 May 2011, Antonio Olivares wrote:
I have a machine that was working fine with a flat panel monitor at
work. I brought the machine home to connect to a TV with PC input and
I get Out of Range message. X does
On Sat, May 28, 2011 at 8:50 PM, Warren Block wbl...@wonkity.com wrote:
On Sun, 29 May 2011, Antonio Olivares wrote:
bash-4.1# xrandr -q
Screen 0: minimum 320 x 200, current 1360 x 768, maximum 4096 x 4096
VGA-1 connected 1360x768+0+0 (normal left inverted right x axis y
axis) 930mm x 523mm
On Sat, May 28, 2011 at 9:06 PM, Antonio Olivares
olivares14...@gmail.com wrote:
On Sat, May 28, 2011 at 8:50 PM, Warren Block wbl...@wonkity.com wrote:
On Sun, 29 May 2011, Antonio Olivares wrote:
bash-4.1# xrandr -q
Screen 0: minimum 320 x 200, current 1360 x 768, maximum 4096 x 4096
VGA-1
On Sun, May 29, 2011 at 10:16 AM, Warren Block wbl...@wonkity.com wrote:
On Sun, 29 May 2011, Antonio Olivares wrote:
I appreciate the help, but I could not get it to work. I put in Modes
1024x768 800x600, etc and changed the VertRefresh several times
and it was a no GO :(, still Monitor out
You could always have ${1:-theuser} instead to have a default of
theuser, but take the value for username as the first argument.
Chris
That's a good idea. The user was originally called me, but I wanted
something that could be searched and replaced without breaking gnome
and home. Using
Mathew,
On Sun, Jun 5, 2011 at 3:53 PM, Matthew Navarre mnava...@cox.net wrote:
I updated my FreeBSD box from 6.4 to 7.4 using freebsd-update, got my
installed ports in order and updated and installed/updated kde4-4.6.3 and all
its dependancies. Xorg works ( i can run twm successfully), but
I created a new user with an empty $HOME, added the startkde line to
.xinitrc and had the same problem. I did notice that drkonqi is crashing and
writing out a .core file, so I'll see if gdb can tell me anything.
Thanks,
mnavarre
Read about something called kchildlock :
kchildlock
on an
I'd love to help, if someone could help me find a JOB. In the US, virtualy no
one runs FreeBSD, so I am unable to find a job, even with 34 years experience.
___
Virtually, right?
Maybe they do run FreeBSD on a virtual machine? There are no stats to
On Wed, Jul 13, 2011 at 4:53 PM, Jeff Hamann jeff.d.ham...@gmail.com wrote:
I've tried to install the teTeX port (for pdflatex, etc.) and keep running
into this error.
I can't seem to find a solution on the web and I could really use the help.
freebsd-82-amd64# uname -a
FreeBSD
On Thu, Jul 14, 2011 at 3:59 AM, Polytropon free...@edvax.de wrote:
On Wed, 13 Jul 2011 11:49:59 -0700, James Colannino wrote:
Hey everyone,
I've been Googling around, trying to figure out how to see Windows
printers via CUPS on FreeBSD, but so far, all I've found are links
describing how to
I hoped for a true native port for TeXLive
I can't see that it's really necessary. I remember difficulties with the
2009 release when FreeBSD binaries were not included but now they are the
installation is headache-free.
What exactly is missing from teTeX?
Try this, get the source for
On Fri, Jul 15, 2011 at 3:31 PM, Anton Shterenlikht me...@bristol.ac.uk wrote:
On Fri, Jul 15, 2011 at 09:33:45AM -0500, Antonio Olivares wrote:
I hoped for a true native port for TeXLive
I can't see that it's really necessary. I remember difficulties with the
2009 release when FreeBSD
On Sun, Jul 17, 2011 at 2:40 AM, Aryeh Friedman
aryeh.fried...@gmail.com wrote:
Is there any way to force a complete power down and then reset of a
i386 without physically being present?
___
Sure!
If I understand your question correctly, reboot yes,
Which nicely brings us back to where this thread started: What needs to
happen to make sure FreeBSD stays relevant as computing moves to these
devices? ;) (Or should FreeBSD try to be relevant to the end-user at
all? Part of what makes this an appealing option is increased 'cloud
On Tue, Jul 26, 2011 at 7:57 PM, Mark Moellering m...@msen.com wrote:
I want to automate some tasks, creating directories, file editing, etc. I
was going to pick up a book on shell scripting but wanted to ask the list
if;
A) I am barking up the wrong tree and should use something else.
B) If
Dear kind folks,
I got me a new hard drive on one of my machines and installed FreeBSD
8.2 amd64 on it. I tried to run
# portupgrade -R firefox
which would update firefox to latest and all the ports that depend on
it, but I am encountering a problem with shared-mime-info.
quadcore#
Any hints/pointers to resolve this issue?
Thanks in Advance,
Antonio
# portupgrade -Nv p5-XML-Parser
Regards,
--
Frank,
Thank you very much, but it still fails:
quadcore# portupgrade -Nv p5-XML-Parser
--- Session started at: Wed, 27 Jul 2011 09:33:21 -0500
[Updating the pkgdb
@ALL
On Wed, Jul 27, 2011 at 9:36 AM, Antonio Olivares
olivares14...@gmail.com wrote:
Any hints/pointers to resolve this issue?
Thanks in Advance,
Antonio
# portupgrade -Nv p5-XML-Parser
Regards,
--
Frank,
Thank you very much, but it still fails:
quadcore# portupgrade -Nv p5-XML
Dear folks,
I have a working installation 8.2 Release AMD64 and I am trying to
follow a printing howto :
http://www.wonkity.com/~wblock/docs/html/lpdprinting.html
I am copying the settings and I can't print.
quadcore# lpq -a
lp:
Warning: no daemon present
Rank Owner Job Files
Anton et all,
hrs@ has been most speedy and helpful. He added
print/latex-chapterfolder
print/tex-mfpic
With these 2 new ports + teTeX I can build this book
fully, no errors. Check it out.
If you know of another tex project where teTeX fails,
please send me the details. I'm keen to
On Wed, Jul 27, 2011 at 2:51 PM, Antonio Olivares
olivares14...@gmail.com wrote:
Dear folks,
I have a working installation 8.2 Release AMD64 and I am trying to
follow a printing howto :
http://www.wonkity.com/~wblock/docs/html/lpdprinting.html
I am copying the settings and I can't print
On Wed, Jul 27, 2011 at 3:16 PM, Gary Kline kl...@thought.org wrote:
folks,
i sent a couple freebsd questions days ago and did not bcc myself. i never
saw the post nor got any response. anyway, new one: is there any way of
getting my 'brother HL-3040CN' color laser printr to work. i
On Wed, Jul 27, 2011 at 4:23 PM, Warren Block wbl...@wonkity.com wrote:
On Wed, 27 Jul 2011, Warren Block wrote:
A Deskjet 812C should be a parallel printer, with device /dev/lpt0. Are
you using a USB to parallel adapter?
Cancel that, an 812C has both parallel and USB. Make sure only the
On Wed, Jul 27, 2011 at 5:11 PM, Warren Block wbl...@wonkity.com wrote:
On Wed, 27 Jul 2011, Antonio Olivares wrote:
I changed /etc/printcap, and two blank pages came out but blank :(
Okay, it's progress. And good news, that printer understands plain ASCII
and PCL3.
Make certain lpd
On Wed, Jul 27, 2011 at 5:43 PM, Ross basarev...@gmail.com wrote:
It requires CUPS and replaces system lpr. Here's an example on setting
up HPLIP: http://daemon-notes.com/articles/install/hplip
On Thu, Jul 28, 2011 at 1:25 AM, Antonio Olivares
olivares14...@gmail.com wrote:
On Wed, Jul 27
On Wed, Jul 27, 2011 at 6:03 PM, Ross basarev...@gmail.com wrote:
On Thu, Jul 28, 2011 at 1:54 AM, Antonio Olivares
olivares14...@gmail.com wrote:
On Wed, Jul 27, 2011 at 5:43 PM, Ross basarev...@gmail.com wrote:
It requires CUPS and replaces system lpr. Here's an example on setting
up HPLIP
I will be patient and try some things out then report back. I
appreciate the help and if I can't find a solution, I will take the
plunge :) and hopefully not fail.
Regards,
Antonio
If you do decide to take this route, it's not that hard to recompile a kernel.
# csup -h
Dear folks,
I would like to kindly ask you as the Subject Line tells it all. I
believe I have done my homework, and I have tried out some competing
LiveCDs from *BSD like Bsdanywhere, jibbed(NetBSD), jggimi(OpenBSD),
had used RoFreeSBIE(FreeBSD based but unmaintained), Frenzy, Mahesha,
old
ps: i did read that the brother only wsorks with lighteight
paper; another comlaint is that it goes thru toner very
fast. ...
--
Try to use DRAFT option if it* exits :)
I do this at work so ink lasts more on the average.
Regards,
Antonio
If you do decide to take this route, it's not that hard to recompile a
kernel.
# csup -h cvsup.FreeBSD.org -L2 /usr/share/examples/cvsup/standard-supfile
Copy your kernconf, say COFFIN, to /usr/src/sys/i386/conf/ if you are
on 32bit or to /usr/src/sys/amd64/conf/ if on amd64.
The file
@ all,
I restarted machine and I can print from command line :)
[olivares@quadcore ~/Documents]$ cat Document1.txt | lpr -P Deskjet
[olivares@quadcore ~/Documents]$ lpq -a
Deskjet:
Deskjet is ready and printing
Rank Owner Job Files Total Size
active
On Wed, Jul 27, 2011 at 8:05 PM, Antonio Olivares
olivares14...@gmail.com wrote:
@ all,
I restarted machine and I can print from command line :)
[olivares@quadcore ~/Documents]$ cat Document1.txt | lpr -P Deskjet
[olivares@quadcore ~/Documents]$ lpq -a
Deskjet:
Deskjet is ready
On Thu, Jul 28, 2011 at 8:15 AM, Polytropon free...@edvax.de wrote:
On Wed, 27 Jul 2011 20:05:12 -0500, Antonio Olivares wrote:
@ all,
I restarted machine and I can print from command line :)
[olivares@quadcore ~/Documents]$ cat Document1.txt | lpr -P Deskjet
[olivares@quadcore ~/Documents
For example, your ~/.bashrc could look like this:
setxkbmap -option compose:ralt
export PRINTER=Deskjet
Keep in mind that in _this_ case, $PRINTER is set for
_your_ account only (which should be fine on a single-
user system).
However, if you set it up in /etc/csh.cshrc for
However, if you set it up in /etc/csh.cshrc for system-
wide use, user shells like bash should incorporate the
setting.
--
Polytropon,
I have made the changes, but the printer does not print :( from firefox.
I might ``try the /etc/csh.cshrc for system-
wide use'' option :) and get
On Thu, Jul 28, 2011 at 10:57 AM, Polytropon free...@edvax.de wrote:
On Thu, 28 Jul 2011 10:44:52 -0500, Antonio Olivares wrote:
Made the changes with global /etc/csh.cshrc and it did not work :(
Requires re-login, but reboot should also be fine. :-)
Rebooted and firefox did not print
Anton et all,
I have found another book diffyqs that does not compile with default
teTeX, but does with TeXLive:
Book is found here:
http://www.jirka.org/diffyqs/
Source is here:
http://www.jirka.org/diffyqs/diffyqs.tar.gz
I create build script:
/*** build script **/
Dear folks,
I have successfully updated most ports, but having problems with mplayer:
/usr/local/live/BasicUsageEnvironment/libBasicUsageEnvironment.a
-L/usr/local/lib -rpath=/usr/lib:/usr/local/lib
-liconv -lncurses -lpng -lz -ljpeg -lungif -lcdda_interface
On Fri, Jul 29, 2011 at 3:55 PM, Antonio Olivares
olivares14...@gmail.com wrote:
Dear folks,
I have successfully updated most ports, but having problems with mplayer:
/usr/local/live/BasicUsageEnvironment/libBasicUsageEnvironment.a
-L/usr/local/lib -rpath=/usr/lib:/usr
@all
I could not get tlgmr to remove texlive
/*** try to removal of texlive */
tricorehome# tlmgr --uninstall
Useless use of log in void context at /usr/local/bin/tlmgr line 536.
Useless use of log in void context at /usr/local/bin/tlmgr line 636.
Useless use of log in void context at
@All
I have solved the problem with TeTeX. I had to remove symlinks to
files created by texlive manually and reinstall the ports one at a
time and I am back. Sorry for the noise.
BTW,
I figured out that I needed /usr/ports/print/latex-pgf/ for the
diffyqs.tar.gz (Differential Equations Book
On Fri, Jul 29, 2011 at 10:29 PM, Antonio Olivares
olivares14...@gmail.com wrote:
@All
I have solved the problem with TeTeX. I had to remove symlinks to
files created by texlive manually and reinstall the ports one at a
time and I am back. Sorry for the noise.
BTW,
I figured out that I
If you know of another tex project where teTeX fails,
please send me the details. I'm keen to patch
teTeX as far as possible with no major
changes to TDS, i.e. just adding or updating
a package.
--
Anton et all,
The famous lshort by Tobias Oetiker fails to compile with TeTeX
freebsd
On Sat, Jul 30, 2011 at 2:52 PM, Anton Shterenlikht me...@bristol.ac.uk wrote:
On Wed, Jul 27, 2011 at 03:22:46PM -0500, Antonio Olivares wrote:
Here's another book with source code, and even with full texlive can't
get it to compile properly :(
http://www.mecmath.net/trig/
This took some
1 - 100 of 276 matches
Mail list logo
