Netgear FA511 driver
Hi all, Has anybody managed to make an FA511 card work under FreeBSD ? Many thanks, Ganaël LAPLANCHE [EMAIL PROTECTED] Tel : (+33)6.84.03.57.24. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: playing a DVD with mplayer
Hi, Isn't there a mean to launch the full DVD and to navigate through the in a graphical way (as ogle or xine) ? Ganaël LAPLANCHE [EMAIL PROTECTED] Tel : (+33)6.84.03.57.24. -- Original Message --- From: Peder Blom [EMAIL PROTECTED] To: stan [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Mon, 1 Sep 2003 09:14:14 +0200 Subject: Re: playing a DVD with mplayer On Sat, 30 Aug 2003 21:13:52 -0400 stan [EMAIL PROTECTED] wrote: I just got a new notebook with a DVD drive. I compiled mplayer from the ports. Now I want to play a smaple VD that I have. What do I need to do to mount the DVD? -- You don't have to mount it. Just run mplayer. As an example, this is what I do to view chapter 5 of title 6 with japanese sound and english subtitles in fullscreen mode: mplayer -dvd 6 -dvd-device /dev/acd0c -alang ja -slang en -fs -cache 8192 -chapter 5 See man mplayer for (many!) more options. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- End of Original Message --- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: playing a DVD with mplayer
Hi Peder, I agree with you, no need for a gui... But what I meant is I'd like to access the DVD (the disc !) menu, not the one of the software, a command line is much more efficient ;-) Ganaël LAPLANCHE [EMAIL PROTECTED] Tel : (+33)6.84.03.57.24. -- Original Message --- From: Peder Blom [EMAIL PROTECTED] To: Ganael Laplanche [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wed, 3 Sep 2003 17:31:02 +0200 Subject: Re: playing a DVD with mplayer On Tue, 2 Sep 2003 08:36:37 + Ganael Laplanche [EMAIL PROTECTED] wrote: Hi, Isn't there a mean to launch the full DVD and to navigate through the in a graphical way (as ogle or xine) ? You can define WITH_GUI when you build the port (see the Makefile). I also think that there are some graphical frontends in ports/multimedia that you might want to look at. But as I've never used any gui for mplayer I don't know if they bring in any additional functionality. Note that if you use the command line you can put options in ~/.mplayer/config so most of the time you just have to enter something like mplayer -dvd 1 to watch a movie. --- End of Original Message --- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Asus K8N-E and slow disk transfer
[This is a repost from the amd64 list] Hi all, I've just bought an ASUS K8N-E mobo. I'm using FreeBSD-5.3-Stable (amd64) and suffering from *very* slow disk transfer rates. The chipset is an nforce3 and is correctly detected at boot : # dmesg [...] atapci0: nVidia nForce3 Pro UDMA133 controller port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci 0 [...] My disk is an UDMA100 one, everything seems to be correct : # atacontrol mode 0 Master = UDMA100 Slave = BIOSPIO # sysctl -a [...] hw.ata.atapi_dma: 1 hw.ata.ata_dma: 1 [...] I use a new 80 lead ATA cable (shipped with my mobo)... Evrything should be okay, but the whole system is very very slow. Copying a 600 MB takes about 10 minutes (1 MB/sec) and makes the system nearly unusable during the copy. Do you have any idea ? Ganaël LAPLANCHE [EMAIL PROTECTED] http://www.martymac.com Tel : (+33)6.84.03.57.24. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Asus K8N-E and slow disk transfer (fwd)
Hi Rob, It runs well but you have to turn ACPI off at boot... Ganaël LAPLANCHE [EMAIL PROTECTED] http://www.martymac.com Tel : (+33)6.84.03.57.24. -- Original Message --- From: Robert McHugh [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thu, 6 Jan 2005 20:18:26 -0500 (EST) Subject: Asus K8N-E and slow disk transfer (fwd) Hello Ganael, I have the same motherboard with two 160gb western digital sata disks. I never ran any benchmarks on them, but the performance is nice. I was curious to know if you were able to get the amd64 release of FreeBSD 5.3 to run on your system. I tried many times but the install hangs when it calls out to sysinstall. The 32 bit version runs fine. Thanks and good luck, Rob -- Forwarded message -- Date: Thu, 6 Jan 2005 16:50:05 + From: Ganael Laplanche [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Subject: Asus K8N-E and slow disk transfer [This is a repost from the amd64 list] Hi all, I've just bought an ASUS K8N-E mobo. I'm using FreeBSD-5.3-Stable (amd64) and suffering from *very* slow disk transfer rates. The chipset is an nforce3 and is correctly detected at boot : # dmesg [...] atapci0: nVidia nForce3 Pro UDMA133 controller port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci 0 [...] My disk is an UDMA100 one, everything seems to be correct : # atacontrol mode 0 Master = UDMA100 Slave = BIOSPIO # sysctl -a [...] hw.ata.atapi_dma: 1 hw.ata.ata_dma: 1 [...] I use a new 80 lead ATA cable (shipped with my mobo)... Evrything should be okay, but the whole system is very very slow. Copying a 600 MB takes about 10 minutes (1 MB/sec) and makes the system nearly unusable during the copy. Do you have any idea ? Ganaël LAPLANCHE [EMAIL PROTECTED] http://www.martymac.com Tel : (+33)6.84.03.57.24. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- End of Original Message --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Asus K8N-E and slow disk transfer
Hi Jorn, It is set to auto. I haven't tried to set it manually, maybe it's a good idea ! I'm gonna try this... Thanks, Ganaël LAPLANCHE [EMAIL PROTECTED] http://www.martymac.com Tel : (+33)6.84.03.57.24. -- Original Message --- From: Jorn Argelo [EMAIL PROTECTED] To: Ganael Laplanche [EMAIL PROTECTED], freebsd-questions@freebsd.org Sent: Thu, 6 Jan 2005 19:05:16 +0100 Subject: Re: Asus K8N-E and slow disk transfer On Thu, 6 Jan 2005 16:50:05 +, Ganael Laplanche wrote [This is a repost from the amd64 list] Hi all, I've just bought an ASUS K8N-E mobo. I'm using FreeBSD-5.3-Stable (amd64) and suffering from *very* slow disk transfer rates. The chipset is an nforce3 and is correctly detected at boot : # dmesg [...] atapci0: nVidia nForce3 Pro UDMA133 controller port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci 0 [...] My disk is an UDMA100 one, everything seems to be correct : # atacontrol mode 0 Master = UDMA100 Slave = BIOSPIO Are you sure that the BIOS is using the correct PIO mode? You can try setting it yourself though. However, I don't have too much experience with that. I do know that the incorrect PIO mode can make your PC extremely slow. Jorn # sysctl -a [...] hw.ata.atapi_dma: 1 hw.ata.ata_dma: 1 [...] I use a new 80 lead ATA cable (shipped with my mobo)... Evrything should be okay, but the whole system is very very slow. Copying a 600 MB takes about 10 minutes (1 MB/sec) and makes the system nearly unusable during the copy. Do you have any idea ? Ganaël LAPLANCHE [EMAIL PROTECTED] http://www.martymac.com Tel : (+33)6.84.03.57.24. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- End of Original Message --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: LDAP user authentication?
On Fri, 15 Feb 2008 09:45:23 +0700 (ICT), Olivier Nicole wrote Hi Olivier, Though I am looking one step ahead, how to allow a user to authenticate to this machine and not that machine, using the same ldap directory. You can override attributes in you /usr/local/etc/nss_ldap.conf. Something like this : nss_override_attribute_value homeDirectory /dev/null nss_override_attribute_value loginShell /usr/bin/false nss_override_attribute_value userPassword x should prevent users from login on your machine. Best regards, Ganaël LAPLANCHE [EMAIL PROTECTED] http://www.martymac.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: devel/gojbect-introspection fails due to not finding libintl
On Mon, 31 May 2010 15:41:42 +0300, Eitan Adler wrote Hi Eitan, /libexec/ld-elf.so.1: Shared object libintl.so.8 not found, required by libgirepository-1.0.so.0 pkg_create -b gobject-introspection-0.6.11 (keep it, it may be useful) cd /usr/ports/devel/gobject-introspection make deinstall clean make install clean did the trick for me... Best regards, Ganaël LAPLANCHE ganael.laplan...@martymac.org http://www.martymac.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
