Hi,
We are in the process to replace two Cisco Pix firewalls and one Cisco
router with two servers running PF with carp. The network is large
(it is an University) and all will depend on this two machines.
We have made some tests with OpenBSD, PF and OpenBGPD and it looks to
work (but we have to
Le Thu, 30 Sep 2010 21:10:59 +0200,
Anselm Strauss a écrit :
> Maybe sending it to just the USB list was too specific ...
>
> On 09/30/10 00:08, Anselm Strauss wrote:
> > I have an ALIX board that has an AMD Geode and the CS5536 companion
> > chip with integrated USB on it. When I connect a USB
Le Fri, 01 Oct 2010 08:24:30 -0400,
Kevin Kobb a écrit :
> Both would probably be fine. However, I would recommend taking a look
> at pfsense if I were you. It is made to do what you want without as
> much of the overhead as a full blown *BSD install.
>
> It is easier to configure, update, the d
Le Sat, 2 Oct 2010 11:36:40 -0700,
Robert a écrit :
> I tried to use "dd" and copy data to another spare drive. It appears
> to work but then I can no longer mount that drive. Other than taking
> it to a data recovery shop does anyone have any idea.
May be "photorec" will help (in systutils/tes
Le Sat, 02 Oct 2010 21:26:26 +0300,
Manolis Kiagias a écrit :
Hello,
> This release is based on the latest XFCE desktop and includes a wide
> variety of desktop-related packages, like OpenOffice, abiword,
> gnumeric, firefox35, gimp, inkscape, evince and so on. The base
> system is 8.1-RELEASE.
Le Tue, 5 Oct 2010 11:55:50 -0700,
Ed Flecko a écrit :
Hello,
> 1.) I want to follow the 8.1 errata branch, which (after rebuilding)
> pretty much just applies any released patches, right?
Yes
> 2.) I want the entry in my supfile to read: tag=RELENG_8_1_0 - or
> tag=RELENG_8.1_0 ?
You must us
it does not work as advertised.
Good luck.
Pat
--
Patrick Ouellette p...@flying-gecko.net
ne4po (at) arrl (dot) net Amateur Radio: NE4PO
What kind of change have you been in the world today?
___
freebsd-questions@freebsd.o
Le Fri, 12 Nov 2010 17:26:39 +0400,
"Rakhesh Sasidharan" a écrit :
Hello,
> Any idea why kernel crashed, or what I can do to prevent this in
> future? I understand from the forums that this could be due to bad
> memory or bad hard disk, but I was wondering whether this could also
> be due to any
Le Tue, 30 Nov 2010 21:45:03 +0100,
David Demelier a écrit :
> Hello,
Hello,
> We all know that we can only have 8 ufs partitions in one freebsd
> slice. Since OpenBSD and NetBSD can support at most 32 partitions
> iirc.
>
> I wonder why FreeBSD still lacks more ufs partitions in one slice?
>
Le Wed, 05 Jan 2011 14:49:31 +0100,
David Demelier a écrit :
> Hello,
Hello,
> I can't write these characters '€' 'œ' using ISO-8859-15 locales, in
> fact the 'œ' character is replaced with '½'.
>
> As you can see here http://fr.wikipedia.org/wiki/ISO_8859-15 the œ
> character should be repl
Le Wed, 05 Jan 2011 17:20:02 +0100,
David Demelier a écrit :
> by the way xev outputs this :
The keysym is good.
IMO the problem is in the display. How do you see this text in
iso-8859-15 (download and cat test.txt)?
http://user.lamaiziere.net/patrick/test.txt
You should see "un œuf
Le Sat, 15 Jan 2011 18:57:33 -0500,
Aryeh Friedman a écrit :
> No idea how but when I plug the USB in it says "USB Debugging
> Connected"
On my HTC dream when I connect it to USB, there is a notification on the
phone and I have (on the phone) to "unmount" the sd card.
Then I can mount the sd ca
Le Sun, 16 Jan 2011 09:41:06 -0500,
Aryeh Friedman a écrit :
> My situtation is a little different I am a developer hired to do some
> work on the android but have never done *ANY* mobile programming so
> starting from square on from essencially yesterday
I think you have to use the android SDK
Le Sat, 29 Jan 2011 12:39:18 +1000,
Da Rock a écrit :
> I spent some time playing with pf and pf.conf, and followed the
> directions in the handbook. It redirected me to the openbsd site for
> pf.conf, and recommended it as the most comprehensive documentation
> for pf.
>
> Firstly, I didn't f
rive.
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/serialconsole-
> setup.html#SERIALCONSOLE-HOWTO
>
> 7.2 Create the /boot.conf file
> http://www.freebsd.org/doc/en_US.ISO8859-1/articles/console-
> server/freebsd.html
>
Here on my HP P
ant to see which
one was used during linking, use the ld options '-M -Map --cref' which
will create a map file with cross references.
Patrick
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
It's at the root -
# echo /boot.conf
-P
Patrick
Patrick Mahan
Lead Technical Kernel Engineer
Adara Networks
Disclaimer: The opinions expressed here are solely the responsibility of the
author and are not to be
construed as an off
Le Thu, 03 Feb 2011 22:15:09 -0800,
Rem P Roberti a écrit :
> Icu is a necessary dependency for Gimp, but I can't get it to
> install. I checked UPDATING and it states that icu4 is now
> deprecated, and one should install /devel/icu. But when I try to do
> that the file that is downloaded is icu
Le Fri, 13 Jul 2012 12:32:48 +0100,
Vincent Hoffman a écrit :
> I've been playing with poudriere and pkg as per
> http://fossil.etoilebsd.net/poudriere/doc/trunk/doc/pkgng_repos.wiki
> in the hope that it will be an easier way to maintain a custom
> internal package repository for work not I'va m
Le Tue, 17 Jul 2012 12:16:12 +0300,
Виталий Туровец a écrit :
Hello,
> Hello, colleagues!
> How would one propose some code to current branch?
> I've made a little change to ifconfig ( a switch to display IPv4
> network masks in CIDR format instead of HEX) and want to suggest this
> change to Fr
Le Wed, 18 Jul 2012 12:53:00 +0300,
Виталий Туровец a écrit :
Hello,
> > The general advice is mail the patch to -hackers for review. If you
> > don't get a reply or if people like it, submit a PR so it doesn't
> > get lost. Be aware that the latency for some patches could be
> > longer than you
Le Thu, 6 Sep 2012 20:46:53 +0530,
SivaReddy Obili a écrit :
Hello,
> Recently I've downloaded the FreeBSD 8.3 Release ISO Image
> (FreeBSD-8.3-RELEASE-i386-dvd1 (1).iso) and installed in our machine.
> Actually our requirement is to check the TCP MD5 support on
> FreeBSD8.3 .
>
> But we were n
Le Wed, 03 Oct 2012 19:13:11 +0930,
Shane Ambler a écrit :
> I have a GT 520 with 9.0 amd64 and found that v304.43 refused to run
> my second monitor so I went back to v295.
Did you check the resolution of the second monitor? Here on my box, v304
does not handle any more the previous resolution
Le Sun, 14 Oct 2012 03:57:20 +0200,
"Christopher J. Ruwe" a écrit :
Hello,
> for some time I have noticed that poudriere bulk build amass fetch
> errors, i.e., the corresponding distfile(s) cannot be fetched by the
> build jail and I have to fetch these manually.
>
> Does anybody know a fix to
Hi,
I'm updating an old laptop running FreeBSD 8.1 with 64 MB ram (44MB
available) but now FreeBSD 9.1 panics at boot time:
panic: kmem_malloc(4194304): kmem_map too small: 24584192 allocated?
Any work-around?
Thanks regards.
___
freebsd-questions@fre
Le Mon, 22 Oct 2012 03:49:50 +1100,
andrew clarke a écrit :
Hello,
> > I'm updating an old laptop running FreeBSD 8.1 with 64 MB ram (44MB
> > available) but now FreeBSD 9.1 panics at boot time:
> >
> > panic: kmem_malloc(4194304): kmem_map too small: 24584192 allocated?
>
> That's one very ol
Le Sat, 27 Oct 2012 16:54:45 -0700,
Yuri a écrit :
> RELENG_9 is supposed to represent the latest branch of 9.1. De facto,
> code says it is PRERELEASE (sys/conf/newvers.sh).
> But freebsd.org on its front page says 9.1 is at RC-2.
> So how can I get RC-2 through cvsup except through RELENG_9 wh
Le Sat, 27 Oct 2012 21:22:32 +0300,
Alexander Kapshuk a écrit :
> Having done all of the above, I ran portupgrade to update all the
> pkgs that needed upgrading on my system, and got the message below:
> root@box0:/root/tmp # portupgrade -varRP --batch -L '%s_%s'
> USING PKGNG
> Packages are not
Le Sun, 28 Oct 2012 11:48:19 -0700,
Yuri a écrit :
> > RELENG_9 should be called 9-STABLE, if you want 9.1 use RELENG_9_1
>
> Hm, if they wanted to keep RELENG_9 as "stable" 9.X branch, why then
> 9.1-PRERELEASE is there? Is PRERELEASE considered more stable than
> RC? This looks strange to me.
Hello,
For and unknown reason here, Firefox (16.0 and ESR) doesn't want to be
in french anymore. Does i18n work for you?
I use directly the fr.xpi (cd /usr/ports/www/firefox-i18n, make
extract), then I add the .xpi via the firefox addons menu. That worked
like a charm before. The "fr" language pa
Le Wed, 07 Nov 2012 00:14:09 +0400,
Boris Samorodov a écrit :
Hi,
> > For and unknown reason here, Firefox (16.0 and ESR) doesn't want to
> > be in french anymore. Does i18n work for you?
> >
> > I use directly the fr.xpi (cd /usr/ports/www/firefox-i18n, make
> > extract), then I add the .xpi v
Le Wed, 07 Nov 2012 11:52:51 +0100,
Leslie Jensen a écrit :
> Quite some time ago there was a solution posted where you had to go
> to addons and install from a file. The language file is downloaded
> to distfiles/xpi. So you just point to the file and choose to
> install it.
Yes this is the w
Hello,
FreeBSD 9.1 amd64, postgrey-1.34_4, perl-5.14.2_2
Here from time to time and since one or two months, postgrey starts to
eat 100% of CPU, it always occurs juste after it cleans its bases. Then
it does not accept any connection:
Dec 2 03:11:49 net-110 postgrey[2252]: cleaning up old logs.
Hello,
(fresh 9.1-STABLE/amd64)
Here localhost or 127.0.0.1 is not resolved anymore. I can see twith
tcpdump hat a DNS request is sent to dns server.
This is something new because a test case used to test name
resolution on a home made application now fails.
$ host localhost
Host localhost not
Hi,
I would like to know why quota is not enabled in the stock kernel..
I remembered that it is not enabled since freebsd 3.5 or freebsd 4 generation.
Now in freebsd 9.0, it still neeed a kernel rebuild.
I have heard it has performance issue (GIANT lock) about quota.
Regards,
Patrick
Le Sat, 22 Dec 2012 16:56:09 +0100,
Bas Smeelen a écrit :
> I have poudriere setup on a server to compile packages for my old
> laptop, mini, and some friends laptops and it works great.
>
> How can I upgrade the perl version of the poudriere jail to
> perl-5.16, it is now perl-5.14?
>
> I tri
Le Sun, 23 Dec 2012 14:17:47 +0200,
Eugen Konkov a écrit :
Hello,
> Or s there any other method to prevent such ilegal DHCP servers on
> LAN?
At work we use "dhcp_probe"
http://www.net.princeton.edu/software/dhcp_probe/
It works quite fine, when someone plug a dhcp server it is detected and
w
Le Thu, 03 Jan 2013 09:50:46 +0100,
Leslie Jensen a écrit :
>
> I need k3b on a newly installed 9.1-RELEASE system.
>
> I wonder if I miss out on some functionality if I go with version
> without KDE?
Don't know.
> I use XFCE4 as my Desktop.
Did you tried sysutils/xfburn? It is ligth but do
Hello,
# poudriere jail -c -j 9amd64 -v stable/9 -m svn
...
--
>>> World build completed on Wed Jan 9 01:32:43 CET 2013
--
>> Starting make installworld
ERROR: Required audi
Le Fri, 11 Jan 2013 09:13:27 +,
Arthur Chance a écrit :
Hello,
> I see that the default environment in /etc/login.conf no longer
> contains FTP_PASSIVE_MODE=YES. I presume this is because ftp and
> fetch default to passive mode so it's deemed no longer necessary?
"MFH r237270: no need to sp
Le Fri, 11 Jan 2013 17:02:19 +0200,
"Zyumbilev, Peter" a écrit :
> Hi,
>
> I run FreeBSD 9.1 64 bit(Nas4free). I have no problem setting up
> FreeBSD jails inside. However, I wonder, is there any tutorial on how
> to make Debian Squeeze run inside a jail ? I know it is possible with
> PC-BSD, sh
Le Tue, 15 Jan 2013 10:35:53 -0800,
"Thomas D. Dean" a écrit :
Hello,
> I am attempting to recompile some code from an older version.
>
> > uname -a
> FreeBSD ZD7000 9.1-STABLE FreeBSD 9.1-STABLE #1: Sun Jan 13 23:44:33
> PST 2013 root@ZD7000:/usr/obj/usr/src/sys/GENERIC i386
>
> > make
Le Thu, 24 Jan 2013 11:51:46 -0500,
Fbsd8 a écrit :
> Is there any situation where assigning the same IP address to a new
> jail that has already been assigned to a previous jail valid?
>
> I think not, but want verification.
>
> What are your thoughts?
I'm sure they are case of this. One exam
Le Wed, 6 Feb 2013 15:03:36 +0100,
CeDeROM a écrit :
Hello,
> I cannot get Bridged Network setup in VBox 4.1.22 on my 9.1RC3 AMD64 -
> I get no traffic to the host interface at all. Did anyone noticed this
> or related problems?
Works fine here (9.1-STABLE/amd64, virtual box 4.2.6). Be sure th
Hi,
I cannot get this card to work on 4.7 / 5.0 RC. I got 'wi0: busy bit won't clear'
problem...
Regards,
Patrick
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
My question is :
How to clear the busy bit and get the wireless lan card to work?
Regards,
Patrick
-Original Message-
From: Mark Rowlands <[EMAIL PROTECTED]>
To: Dung Patrick <[EMAIL PROTECTED]>
Date: Thu, 23 Jan 2003 19:31:52 +0100
Subject: Re: SamSung SWL-2100N PCMCIA
On
, January 30, 2003 10:11 PM
To: Patrick Stinson
Cc: freebsd-current
Subject: Re: appending files on smbfs
Dear/Beste Patrick,
Thursday, January 30, 2003, 8:37:04 PM, you wrote:
> has anyone every had problems with appending existing files on volumes
> mounted by smbfs or shlight?
$ echo
cess
at 09:56 - more than 4 hours later (I would expect an Athlon XP 1700 to
be a bit faster than that!). The CPU was running at 100% during that
time.
No doubt the error is something I have done - can someone help me
identify the problem?
Regar
Hi..
I'm trying to find the php binary for FreeBSD kernel release 4.6
The program cacti requires the php binary, not merely php compiled on the
system.
Is there a way to compile php4.2.1 so that it gives you a binary?
Or do you have to download a pre-compiled binary from the web?
If the latter,
Thanks to everyone who made suggestions..
This one worked perfectly (:
-ph
- Original Message -
From: "Ivan Albetkov" <[EMAIL PROTECTED]>
To: "Patrick Holahan" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, September 17, 2002 2:53 PM
S
(CBQ, RED, WFQ and
> others).
I recall seeing in the man page that DUMMYNET has RED and GRED algorithms
built in - I don't know any more detail t
g portupgrade, and again
> afterwards to see if there had been any further changes.
I had this too - I did a "pkg_delete pkg_tarup", and then ran
"portupgrade portupgrade", and it all _seems_ OK now.
Regards,
Patrick O'Reilly.
______
/ _ )__ __ (_)_
On Saturday, September 28, 2002, at 11:49 PM, Patrick Klee wrote:
> Hi,
> I have been lurking on this list for quite some time.
> I have been a happy Linux user since Red Hat 4.2, however a lot of
> people have convinced me to switch. As of right now, I am on my iMac
> sending
Hi Mooney,
You need to burn the contents of the ISO image.. not the physical file
whatever.iso
If you'd like to read the contents, you can mount the .iso file using the
following:
mount -o loop -t iso9660 /path/to/file /path/to/mount/point
I'm not up to date on cd writing under *nix so I can't
sume fxp0 is your
internet NIC):
> add 500 pipe 1 ip from 192.169.91.16:255.255.255.240 to any via fxp0
> add 500 pipe 2 ip from any to 192.168.91.16:255.255.255.240 via fxp0
---
Regards,
Patrick O'Reilly.
______
/ _ )__ __ (_)_ __ ___ _/ / __
/ __/
From: "master" <[EMAIL PROTECTED]>
> hi all i would like to know the syntax of ipfw to block icmp ping ?
(echo
> and reply)
ipfw add 123 deny ip from any to any icmtypes 8
man ipfw and search for "icmptypes"
Hi there..
Hopefully someone here is able to help me..
I need to run a root command (ipfw) from apache through php. (Yes, this is
not very secure and I'm aware of this and if anyone has any better
suggestions, please feel free to make them.)
Would anyone know how to do this?
Thanks in advance
my current defaultrouter setting is already correct
?
>
The problem is not with the aliases - it is (as the message says) because
the default router is not on a local network. If the router is attached
via fxp0, then try adding an alias like this:
ifconfig_fxp0_alias2="inet 10.10.10.1 netm
mrtg/3 and so on) but also, with the same name.. And therefore,
creates the same values / filenames in each directory (val1, val2, val3,
val4, tim1, tim2, tim3, tim4) would this cause MRTG to have a panic/not
work?
Any suggestions are welcome
Thanks & Regards
Patrick
To Unsubscribe: send
e, I can't seem to locate where this option is. Does anyone
know how I can (re-)activate this?
I'm running 4.6.2, by the way.
Thanks in advance,
Patrick
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
ideas?
Thanks,
Patrick Fish
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi,
I can establish mppe with mschapv1 in linux. I think FreeBSD (userland ppp) only
support mppe + mschapv2. Is there any way to hack it to support mschapv1+mppe.
Regards,
Patrick
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi,
I can't get my sis900 lan card to work with FreeBSD (get a failed to probe error). It
uses a ICS PHY.
Regards,
Patrick
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Does Sybasse V11 is certified on FreeBSD
Does any one of you alreday perform install/and test t an Oracle 9I
Database on FreeBSD.
I know that Oracle is not actually available on this OS
Thanks for your help.
Best regards
P. Dimpre
begin:vcard
n:Dimpre;Patrick
tel;cell:+33 (0)6 08 94 23 82
Hi guys & gals..
I'm trying to get cvs to work on my BSD 4.6-RELEASE system.. and I'd like to
make it easier to use for the clients loggin on.
So what I'd like to do is set the CVSROOT variable to /usr/local/cvsroot
However, when I try set this in .profile like so:
CVSROOT=/usr/local/cvsroot; ex
r/local/cvsroot
> >
> > However, when I try set this in .profile like so:
> >
> > CVSROOT=/usr/local/cvsroot; export CVSROOT
> > It doesn't work
> >
>
> Patrick:
>
> Try:
>
> /etc/profile for sh-like shells (bash, sh, ksh)
> /etc/csh.login fo
ly on boot.
Thanks in advance for any help.
--Patrick
--
Q -- [EMAIL PROTECTED] -- http://www.quealy.org
GPG: pgp.mit.edu, ID 0xFCCBDDBD
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
;FreeBSD-mail', etc?
Finally, can I enable/disable the distributions simply by editing the
value of 'distribs="...' in the file '/usr/local/etc/cvsup/config.sh'?
Thanks.
--
Regards,
Patrick O'Reilly.
Perimeter Networks CC.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hello,
I have a system running a few jails, and the filesystems for these jails
are on `vn` file-backed filesystems.
I want the root user _inside_ the jail to be able to specify and use
quotas for directories/users also _inside_ the jail.
Is this possible ? I cannot get it to work, and I am w
nf\"
# syslogd_flags=\"-ss -l /etc/namedb/dev/log\"
" >> /etc/rc.conf
echo "
***
Remember edit /etc/rc.conf and sort out the three lines I\'ve added!
***
===
HTH :)
--
Regards,
Patrick O'Reilly.
Perimeter Networks CC.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Just curious - because of the resolver bug, every _single_ FreeBSD
installation that now occurs has to be accompanied by a cvsup to -stable,
etc.
Not that this is so bad, but why require every single person - from new to
the OS to veteran - to cvsup just to have a usable system ?
It seems to me
n't work
with the card. I ended up using the .sys and .inf files from the Dell
website that were reference in another ndis article.
Good Luck.
Patrick
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/fre
Lane wrote:
On Sunday 22 October 2006 00:06, Patrick Bowen wrote:
Lane wrote:
Hello,
I've a new inspiron 6400 running FreeBSD 6.1 and I can't get Wireless to
work. It works on WXP using the Dell WLAN drivers at
http://ftp.us.dell.com/network/R115321.EXE
I've followed t
eebsd-questions
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
Shouldn't that be "*default release=cvs tag=."
That is, a period instead of the word HEAD.
Patrick
___
freebsd-questions@freebsd.org mailing list
http://li
y was happening.
I tried using "fdisk -B -b /boot/boot0 /dev/ad0" and "boot0cfg -B
/dev/ad0", thinking that moving back to the FreeBSD booter might do it,
but to no avail.
Can anyone tell me what I might have hosed, and how I might regain the
previous booting
what exactly was happening.
I tried using "fdisk -B -b /boot/boot0 /dev/ad0" and "boot0cfg -B
/dev/ad0", thinking that moving back to the FreeBSD booter might do it,
but to no avail.
Can anyone tell me what I might have hosed, and how I might regain the
previous bootin
--- Doug Barton <[EMAIL PROTECTED]> wrote:
> > On Sunday, 8 July 2007 at 12:06:26 -0700, Patrick Dung wrote:
> >> I am using FreeBSD 6.2 with the default bind (not ports).
> >> By default chroot is used.
>
> It's not a major issue, but it's probabl
Hello,
How to make a dual boot with Stable and Current ? The FreeBSD loader
always uses the bsd partition 'a' to load the kernel. So i always boot
6.2.
My main boot loader is Gag.
Thanks in advance, regards.
___
freebsd-questions@freebsd.org mailing li
Le Fri, 13 Jul 2007 22:38:06 -0400,
Dantavious <[EMAIL PROTECTED]> a écrit :
> Hi.
> It seems that after my update to kde 3.5.7, my kmail filters do not
> work. They only work if I select each message and apply the filter
> manually. If I try to do several at a time kmail crashes. Anyone els
Hi, I'm thinking of getting a couple USB drives to use in
backing up my 6.2-RELEASE-p4 system. Any suggestions or
warnings on brands of USB hard drives?
Regards,
--
Patrick Baldwin
Systems Administrator
Studsvik Scandpower, Inc.
1087 Beacon St.
Newton, MA 02459
1-617-965
oot, any suggestions?
Regards
Patrick
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?lin
Thanks for reply.
Your suggestion solved my problem, thanks.
Yes, /etc/init.d/named is a typo.
Regards
Patrick
--- Doug Barton <[EMAIL PROTECTED]> wrote:
> Patrick Dung wrote:
> > Hi
> >
> > I use FreeBSD 6.2 and the base bind9.
> > For dynamic DNS update,
Hello,
I have a problem and could not find a solution yet. I would like to
hear you opinion.
I have 2 machines, machine A and machine B. They are mail servers
serving with Maildir. I need to find out a solution where I can do
balancing between server A and B while in production, and, if one of
th
Hello,
I've got problem to query PR with
http://www.freebsd.org/cgi/query-pr-summary.cgi
By sample a query with "category: ports", "Text in single-line fields:
textproc/docproj", and "Closed reports too" checked, i don't get any PR
with the result. I think i should get this PR in the result :
ht
Le Sat, 11 Aug 2007 11:35:29 -0400,
Kris Kennaway <[EMAIL PROTECTED]> a écrit :
> > I've got problem to query PR with
> > http://www.freebsd.org/cgi/query-pr-summary.cgi
> >
> > By sample a query with "category: ports", "Text in single-line
> > fields: textproc/docproj", and "Closed reports too"
hen I plug it in. I can get
another USB drive and repurpose the one I've got right now, but
before I put any more resources into this idea, I thought I'd
bounce it off some experts.
Any suggestions, links, etc. welcomed. Particularly for large
capacity USB drives that won't cras
.
Great. What kind of drive? And have you actually
had to do a restore?
--
Patrick Baldwin
Systems Administrator
Studsvik Scandpower, Inc.
1087 Beacon St.
Newton, MA 02459
1-617-965-7455
___
freebsd-questions@freebsd.org mailing list
http://list
-enum-whitepaper-v3.pdf)
but not for FreeBSD. Could someone enlighten me please?
thanks
Patrick
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to &q
Le Sun, 09 Sep 2007 01:38:50 +0300,
OutBackDingo <[EMAIL PROTECTED]> a écrit :
> # .php5 sent to php5
> location ~ .*\.php5$ {
I'm not sure for this expression, i use for .php
location ~ \.php$ {
> include /usr/local/etc/nginx/fastcgi_params;
> fastcgi_pass 127.0.0.1:10005;
>
Le Wed, 19 Sep 2007 18:46:12 -0400,
Lisandro Grullon <[EMAIL PROTECTED]> a écrit :
> Hi Ladies and Gentleman,
Hello,
> I have been trying to get a Buring aplication going in my box, as per
> the handbook recomendation I decided to get xcdroast, I am getting an
> error when I try launching it fro
/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
>
You'll need to upgrade portupgrade(1) to the latest version (2.2.2_4 if
memory serves). See /usr/ports/UPDATING and grep for portupgrade.
Patrick
--
Patrick Bowen
[EMAIL PROT
D]"
No such thing as -stable or -current ports.
Patrick
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
u use the amd64 isos for the installation?
Patrick
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
st
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
You'll probably need to load the atapicam module.
kldload atapicam
as root, of course.
Patrick
___
freebsd-ques
_
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Take a look at Slackware.
http://www.slackware.com
Patrick
___
fr
Patrick Bowen wrote:
[EMAIL PROTECTED] wrote:
Hi,
Sorry this question is a little off-topic...
We've been using Freebsd for many years and all of our servers are
running
freebsd.
The only thing that is a pain with freebsd, is poor commercial
support :(
We are running in a situ
Hello,
I'm asking about the goal of the new option -L of pkgdb :
-L --fix-lost Check and restore lost dependencies against the ports tree.
What is a lost dependency ?
# pkgdb -L
Look for lost dependencies:
ImageMagick-6.3.2.0: found
print/ghostscript-afpl
-> Fixed.
ORBit2-2.14.6: ok
[...]
Bu
(4) driver incapable of WPA encryption?
Thanks for the help.
Try adding;
ifconfig_wi0="DHCP"
to /etc/rc.conf.
That way it will run dhclient automatically whenever you plug the card in.
Patrick
___
freebsd-questions@freebsd.o
Doug Poland wrote:
On Wed, March 7, 2007 17:57, Patrick Bowen wrote:
Doug Poland wrote:
Hello,
I have just acquired a Linksys "Instant Wireless Network PC Card"
802.11b wireless NIC. When plugged into a 6.2 i386 laptop, dmesg
reports:
wi0: at
port 0x100-0x13f irq 11
If one wanted to learn Assembly Language Programming, would he be better
served starting with as(1) or nasm(1)? Also, are either of those
applicable to AMD64, or just i386?
TIA,
Patrick
___
freebsd-questions@freebsd.org mailing list
http
301 - 400 of 616 matches
Mail list logo
