On Mon, May 03, 2004 at 04:04:53PM -0400, Stephen Moriarty wrote:
I'm trying to configure FreeBSD on my notebook such that when it's
docked at the office, I'm able to take advantage of networked resources
- NIS, amd, NFS. When I'm away, I want to selectively, and preferably
automatically,
hi
i am looking for a color inkjet printer/scanner/copier combo.
it should be cheap, supported under 5.2.1, rather small, have separate,
cheaply available ink cartridges. it doesn't need to be fast or have any
fancy features. price comes first, then quality.
can someone recommend a model that
Hi
i have the following task to do:
i need to get the mac adress of my first upstream router (i.e my default
router). there are a number of constraints, however:
1) detection has to be as fast as possible, but 100% reliable
2) i can only use tools from /bin and /sbin, nothing from under /usr.
Hi
On my IBM T30 1.8GHz, dmesg (with both 4.8 and 5.1) shows me this line:
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.8GHz (1196.13-MHz 686-class CPU)
Various windows utilities also claim that the cpu identification string
marks my cpu as 1.8 GHz unit, while the maximum frequency always gets
On Fri, Jul 18, 2003 at 05:17:20PM +0300, Vitali Djatsuk wrote:
Nothing is wrong. This is a thermal protection mode that use P 4 Molbile
processors, this means that when there is nothing to do the processor
works at 1,2Ghz according to your cpu, try to do some workout for youer
system, then
On Fri, Jul 18, 2003 at 08:07:56AM -0700, Kevin Oberman wrote:
Were you on AC or battery when you booted?
It seems that the T30 (and many other laptops from multiple vendors)
does not change the CPU speed when APM/ACPI from FreeBSD tells it
to. If I boot on battery, my system stays at 1.2
On Fri, Jul 18, 2003 at 09:58:17AM -0700, Chad Lauterbach wrote:
I'm receiving the following error when trying to do a make depend on my
new kernel. I'm running FreeBSD 4.8-RELEASE and I installed the kernel
source from the same cd I installed from.
../../dev/fxp/if_fxp.c:81: miibus_if.h:
On Fri, Jul 18, 2003 at 06:22:27PM +0200, Poul-Henning Kamp wrote:
What's wrong here is that the BIOS/ACPI firmware in your laptop
runs your CPU at a reduced rate in order to make the battery last
longer.
it should NOT do this. I set the bios to disable speedstep and to
'max performance' while
On Fri, Jul 18, 2003 at 09:01:51AM -0700, Kevin Oberman wrote:
i was on AC all the time. i tried all combinations in the bios
(speedstep on/off, max performance setting, ...), always the same.
I watch my CPU speed with the gkx86info plug-in for gkrellm. At this
time the plug-in in ports is
On Fri, Jul 18, 2003 at 11:30:15PM -0700, Rus Foster wrote:
Hi All,
How stable is unionfs? Reading the man page for mount_unionfs its says
that its not. Is that still true or is it better on 5.x? ATM I'm running
4.8
mount -o union is very stable for me. note that this is not quite the same
as
On Fri, Jul 18, 2003 at 09:48:59PM +0100, Bruce Cran wrote:
On Fri, Jul 18, 2003 at 07:24:20PM +0200, Tobias Roth wrote:
On Fri, Jul 18, 2003 at 06:22:27PM +0200, Poul-Henning Kamp wrote:
What's wrong here is that the BIOS/ACPI firmware in your laptop
runs your CPU at a reduced rate
Hi
I want to set up an ipsec transport connection between two freebsd
hosts, 192.168.0.1 (host A) and 192.168.0.66 (host B). It seems like
the connection is set up correctly in only one direction:
B# ping -c 1 192.168.0.1
A# setkey -lD
No SAD entries. [a couple of those]
0300 esp L 09d18b19
On Sun, Jun 08, 2003 at 03:10:13PM -0600, Ken Thompson wrote:
Where do I put things to load during boot, things like loading modules and
starting kdm?? Poked about some and am working my way through the complete
bsd #3 as well as the book which I downloaded, but I haven't found
reference to
On Sun, Jun 08, 2003 at 11:14:53PM -0700, Remington L. wrote:
I am looking for software that has the capabilities of Norton Ghost for
FreeBSD. I am having problems finding such an application. Does one exist?
I do not exactly know what Norton Ghost is capable of, but I think
dump(8) or dd(1)
On Mon, Jun 09, 2003 at 11:14:21AM -0400, [EMAIL PROTECTED] wrote:
I want to to know how to create a ram file system for /var and /tmp so
that i can boot from flash memory and mount those two file systems on
ramfs. I've looked for howto's online but haven't found anything. any
suggestions
Hi
Is it save to install WinXP after FreeBSD? My IBM recovery cd goofed
up my WinXP and I'd like to reinstall XP only and keep my existing
FreeBSD slices intact. Same goes for the MBR, of course.
And yes, I will back up my data in any case, but I'd still hate it if
I had to set up my whole
Hi
I somehow destroyed some of my boot files, as it seems. The bootmanager
seems to work: The F1-FN selection appears and works for a different
install on the same disk. But if I chose the broken one, all that
appears is a / and the machine hangs. I fscked and successfully mounted
that partition
Hi
I just installed gkrellm-xkb from the ports (1.00 on 5.1 release with
Xfree86-4.3.0,1 and gkrellm2). I can enable it in gkrellm config, but
there is no menu entry to configure it. The gkrellm install log says
it installed just fine. The krell where the flags should be just shows
a question
I just installed gkrellm-xkb from the ports (1.00 on 5.1 release with
Xfree86-4.3.0,1 and gkrellm2). I can enable it in gkrellm config, but
there is no menu entry to configure it. The gkrellm install log says
it installed just fine. The krell where the flags should be just shows
a
Hi
I use the following commands to create a plain file, make a filesystem on it and mount
it:
vnconfig -T -S 128m -Z -s labels -c vn0 /usr/plainfile
chmod 600 /usr/plainfile
disklabel -r -w vn0 auto
disklabel -e vn0
newfs /dev/vn0c
mount /dev/vn0c /mnt/targetdir
For mounting
Hi
I am looking for a supported graphics card that offers dual-head
1600x1200 with dvi, passively cooled if possible. 3D support
must be present, but it doesn't need to be the latest and fastest.
I came across the Matrox P650, but unlike models of G550 and
below, these seem not directly
On Sun, Dec 11, 2005 at 12:18:05PM -0800, Michael C. Shultz wrote:
Here is how you can bring all ports back to a prior day:
Or even simpler, if you want to only downgrade one port at a time:
sysutils/portdowngrade
cheers, t.
___
Hi
I'd like to add a certificate to OpenSSL. The OpenSSL HOWTO mentions
OPENSSLDIR, which is /etc/ssl on FreeBSD (for OpenSSL from base). To
have OpenSSL recognize a new certificate, it has to be put into
OPENSSLDIR/certs/, but this does not exist on FreeBSD. The
only certs/ dir I could find is
On Sun, Apr 16, 2006 at 10:03:03AM -0400, Robert Huff wrote:
Tobias Roth writes:
I'd like to add a certificate to OpenSSL. The OpenSSL HOWTO mentions
OPENSSLDIR, which is /etc/ssl on FreeBSD (for OpenSSL from base). To
have OpenSSL recognize a new certificate, it has to be put
On Wed, Feb 22, 2006 at 02:19:27PM +0530, Ananth.G wrote:
hi all,
I'm a developer who has atleast 3-4 hrs of spare time daily and would
like to contribute it in woking on FreeBSD, the OS i love. Im really
interested in working on some part of freebsd kernel. It would be great
if someone
. That leaves
dd, but as I am not sure how to do it correctly, I thought I'd rather
ask first.
thanks, t.
--
Tobias Roth|Berne, Switzerland|http://fsck.ch
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
?
Thanks,
Tobias
--
Tobias Roth || http://fsck.ch || PGP: 0xCE599B4D
| The c in rap is silent.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd
Hi
This used to work quite some time ago, when there still was pccardd. How
does it work these days (with 7.x)? I didn't find any documentation on this.
I get as far as
cbb0: 16-bit card inserted, but no pccard bus.
pccard0: 16-bit PCCard bus on cbb0
pccard0: unknown card (manufacturer=0x0045,
On Fri, Aug 25, 2006 at 10:47:33AM -0400, Tsu-Fan Cheng wrote:
Hi BSDers,
I am running freebsd 6.1/amd64. I sometimes download films and they are
quite large, like 1.4GB or something. I want to make it smaller by using
mencoder, the script I use is as such:
mencoder ddd.avi -ovc lavc
Hi
I tried connecting my Ipod Nano 8GB via USB to my -STABLE box. No umass
or ugen device shows up, nothing happens when I connect it. All the USB
stuff is in the kernel, other usb mass devices (cameras, usb sticks)
work like a charm. I tried with GENERIC as well, nothing. Is there a
trick, some
Tobias Roth wrote:
Hi
I tried connecting my Ipod Nano 8GB via USB to my -STABLE box. No umass
or ugen device shows up, nothing happens when I connect it. All the USB
stuff is in the kernel, other usb mass devices (cameras, usb sticks)
work like a charm. I tried with GENERIC as well, nothing
Hi
I run a daily portsnap from cron, using the following line:
/usr/sbin/portsnap cron update /dev/null 21 ;
/usr/local/sbin/portversion -vL=
Until recently, I only received a mail when there were ports to upgrade.
However, now I get this every day, even when there are no new ports:
Garrett Cooper wrote:
That's not going to change until portversion changes. The problem is
most likely that portsnap touches the file and portversion finds it
necessary to update the portsdb. Processing the text from portversion
will yield the info you want.
Cheers,
-Garrett
Ohh, now at
33 matches
Mail list logo