The method suggested by Sunil will work fine but if you plan on using
multiple redirects I would recommend doing this in rc.conf
natd_flags="-config /etc/natd.conf"
and placing the multiple redirects into the file /etc/natd.conf like this
redirect_port tcp 192.168.0.100:5900 5900
HTH
mike
Sunil
I found a good dns hosting service at hn.org. Thanks for all the help.
Kevin Stevens said:
> I recommend Secondary.com; free for a small number of domains, very
> reliable. Pick another free server if you are concerned about better
> redundancy. Then list THOSE nameservers as your authoratitive
I registered a domain name from godaddy.com. They say you must select two
name servers to list on so I chose two of their park servers. I used their
website to add myself to one of the root servers and it worked fine. I now
want to run my own name server because I want to have several subdomains
su
If you want to add rules to NATD you have to completely kill it or send it
the -HUP signal, and then restart it with the rules you want. The easiest
way to add rules to your NATD configuration is to use the natd_flags=""
part of your rc.conf file. To do this create a file in your /etc directory
cal
I've been having a nasty problem with my xserver log file being filled up
with a strange message. Once /var gets to about 80% full the system really
starts slowint down and I can't hardly X. At 90% it is unusable, as far as
X is concnerned. Here is a sample of the output from xdm-errors log, which
I've had big trouble getting my Canon multifunction printer to work
under FreeBSD. My question is, What printer can you all suggest as
being well supported under FreeBSD, and at the same time relatively
cheap. I saw a lexmark z23 for $49, but don't know if it would work
very well. I'm looking
Bob Johnson said:
>Mike Berning appears to have
>written:
>> When I attempt to install FreeBSD 4.7, or any 4.x for that matter, I
>> recieve this error during the initial boot.
>>
>> pci0: (vendor = 0x8086, dev = 0x2445) at 31.5 irq 11
>> pci0: (vendor =
John Bleichert said:
>
> Is this blocking the install or just an error you see during the
> install? On my Thinkpad there is a win32 utility available from IBM to
> set/disable all the onboard devices. Luckily there's also a Linux
> utility ps2). Does Toshiba provide any such utility?
>
> Searc
When I attempt to install FreeBSD 4.7, or any 4.x for that matter, I
recieve this error during the initial boot.
pci0: (vendor = 0x8086, dev = 0x2445) at 31.5 irq 11
pci0: (vendor = 0x8086, dev = 0x2445) at 31.6 irq 11
I've tried doing a kernel configuration to disable device pci0, but it
says
When I attempt to install FreeBSD 4.7, or any 4.x for that matter, I
recieve this error during the initial boot.
pci0: (vendor = 0x8086, dev = 0x2445) at 31.5 irq 11
pci0: (vendor = 0x8086, dev = 0x2445) at 31.6 irq 11
I've tried doing a kernel configuration to disable device pci0, but it
says
10 matches
Mail list logo
