Re: snd_hda blues
On Mon, Jan 4, 2010 at 5:03 PM, Bob Johnson fbsdli...@gmail.com wrote: It is likely that whomever is able to help you will need additional information. You can get this information by rebooting your system and selecting Boot FreeBSD with verbose logging from the boot menu. After it boots, use grep hdac /var/run/dmesg.boot to extract the detailed information about your sound system configuration and post it back to freebsd-questions. If I have time I will try to look through the info and come up with a suggestion, but I must warn you in advance that I am unlikely to find the time in the next few days, so post the info to the list to give others a chance to look at it. Hi Bob Here is the information of a verbose boot. That's the output when i have the following lines in my /boot/device.hints file: hint.hdac.0.cad0.nid22.config=as=1 seq=15 hint.hdac.0.cad0.nid24.config=as=3 hint.hdac.0.cad0.nid26.config=as=1 hint.hdac.0.cad0.nid29.config=as=2 Let me know if you need the verbose output with a virgin /boot/device.hints file - I don't think it would make a difference in this case. Thanks in advance. Sandra - Bob On 1/4/10, Sandra Kachelmann s.kachelm...@googlemail.com wrote: I am trying to get my HDA based soundcard work on both output jacks (back by the card and on the jack on top of the tower). With earlier FreeBSD versions I was able to have my speakers plugged in on the back of my soundcard and whenever I would plug in the headphones on the top of the tower the speakers would mute and the sound would play on the headphones. Now this doesn't work anymore. The speakers work but plugging in the top tower jack won't do anything. Looking at man snd_hda I tried all the examples (adding stuff to /boot/device.hints). None of the examples did what I wanted. By googling a little bit I found a dude who had the same problem so I simply copied the device.hints lines that solved his problem. The following lines make my headphones work: hint.hdac.0.cad0.nid22.config=as=1 seq=15 hint.hdac.0.cad0.nid24.config=as=3 hint.hdac.0.cad0.nid26.config=as=1 hint.hdac.0.cad0.nid29.config=as=2 However, after that my speakers are mute, all the time. If anyone could help me restoring the old snd_hda behaviour I would be very thankful since I don't quite understand what the snd_hda manpage is trying to tell me (sorry, I really tried...). Here are the information I think might help: $ cat /dev/sndstat FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64) Installed devices: pcm0: HDA Realtek ALC883 PCM #0 Analog at cad 0 nid 1 on hdac0 kld snd_hda [MPSAFE] (1p:1v/1r:1v channels duplex default) Any help is gratefully apreciated. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org -- -- Bob Johnson fbsdli...@gmail.com hdac0: Intel 82801I High Definition Audio Controller mem 0xf5ff8000-0xf5ffbfff irq 22 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20091113_0138 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf5ff8000 hdac0: attempting to allocate 1 MSI vectors (1 supported) hdac0: using IRQ 256 for MSI hdac0: [MPSAFE] hdac0: [ITHREAD] hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 hdac0: Probing codec #0... hdac0: HDA Codec #0: Realtek ALC883 hdac0: HDA Codec ID: 0x10ec0883 hdac0:Vendor: 0x10ec hdac0:Device: 0x0883 hdac0: Revision: 0x00 hdac0: Stepping: 0x02 hdac0: PCI Subvendor: 0x829f1043 hdac0: Found audio FG nid=1 startnode=2 endnode=39 total=37 hdac0: hdac0: Processing audio FG cad=0 nid=1... hdac0: GPIO: 0x4002 NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdac0: nid 20 0x01014010 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 0 hdac0: nid 21 0x01011012 as 1 seq 2 Line-out Jack jack 1 loc 1 color Black misc 0 hdac0: nid 22 0x01016011 as 1 seq 1 Line-out Jack jack 1 loc 1 color Orange misc 0 hdac0: Patching pin config nid=22 0x01016011 - 0x0101601f hdac0: nid 23 0x01012014 as 1 seq 4 Line-out Jack jack 1 loc 1 color Grey misc 0 hdac0: nid 24 0x01a19840 as 4 seq 0 Mic Jack jack 1 loc 1 color Pink misc 8 hdac0: Patching pin config nid=24 0x01a19840 - 0x01a19830 hdac0: nid 25 0x02a19c50 as 5 seq 0 Mic Jack jack 1 loc 2 color Pink misc 12 hdac0: nid 26 0x0181304f as 4 seq 15 Line-in Jack jack 1 loc 1 color Blue misc 0 hdac0: Patching pin config nid=26 0x0181304f - 0x0181301f hdac0: nid 27 0x02214c20 as 2 seq 0Headphones Jack jack 1 loc 2 color Green misc 12 hdac0: nid 28 0x593301f0 as 15 seq 0CD None jack 3 loc 25 color Unknown misc 1 hdac0: Patching widget caps nid=29 0x0040 - 0x0070 hdac0: nid 30 0x01441130 as 3 seq 0 SPDIF-out Jack jack 4 loc 1 color
snd_hda blues
I am trying to get my HDA based soundcard work on both output jacks (back by the card and on the jack on top of the tower). With earlier FreeBSD versions I was able to have my speakers plugged in on the back of my soundcard and whenever I would plug in the headphones on the top of the tower the speakers would mute and the sound would play on the headphones. Now this doesn't work anymore. The speakers work but plugging in the top tower jack won't do anything. Looking at man snd_hda I tried all the examples (adding stuff to /boot/device.hints). None of the examples did what I wanted. By googling a little bit I found a dude who had the same problem so I simply copied the device.hints lines that solved his problem. The following lines make my headphones work: hint.hdac.0.cad0.nid22.config=as=1 seq=15 hint.hdac.0.cad0.nid24.config=as=3 hint.hdac.0.cad0.nid26.config=as=1 hint.hdac.0.cad0.nid29.config=as=2 However, after that my speakers are mute, all the time. If anyone could help me restoring the old snd_hda behaviour I would be very thankful since I don't quite understand what the snd_hda manpage is trying to tell me (sorry, I really tried...). Here are the information I think might help: $ cat /dev/sndstat FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64) Installed devices: pcm0: HDA Realtek ALC883 PCM #0 Analog at cad 0 nid 1 on hdac0 kld snd_hda [MPSAFE] (1p:1v/1r:1v channels duplex default) Any help is gratefully apreciated. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ifdown/ifup under FreeBSD?
On Thu, Dec 17, 2009 at 4:17 PM, Greg Larkin glar...@freebsd.org wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Sandra Kachelmann wrote: On Thu, Dec 17, 2009 at 3:46 PM, Igor V. Ruzanov ig...@canmos.ru wrote: |Under RedHat Linux I can configure an interface, routes and so on in |/etc/sysconfig/network-scripts/ifcfg-eth1, |/etc/sysconfig/network-scripts/routes-eth1 then simply run: | |$ ifup eth1 | |and it will set all the routes/netconfig/aliases I just configured. | |Is there something similar in FreeBSD? | |I tried configuring aliases in /etc/rc.conf and running: | |$ /etc/rc.d/netif restart | |but that just ended in errors that the route was already configured |and so on. Sure I could do all the work manually with ifconfig and |route but that's not my question. | Under FreeBSD (as well as under Linux) you could use Zebra (Zebra/Quagga projects) to configure any interfaces/routing specific things. I try to avoid doing complex routing things on my servers. I leave that up to the NOC guys. They can do that on their fancy cisco switches. I want just one route per interface :-) I just wanted to add a seperate route/ip for the second interface, make it permanent by adding it to /etc/rc.conf and tell my FreeBSD to pretend it's booting up by running /etc/rc.d/netif restart. As others pointed out I forgot /etc/rc.d/route. Sandra Hi all, I use /etc/netstart, since it includes all of the commands listed previously, as well as others that start the DHCP client, firewall, etc. That's what i was looking for. How do you use it correctly? Just sh /etc/netstart? Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
ifdown/ifup under FreeBSD?
Under RedHat Linux I can configure an interface, routes and so on in /etc/sysconfig/network-scripts/ifcfg-eth1, /etc/sysconfig/network-scripts/routes-eth1 then simply run: $ ifup eth1 and it will set all the routes/netconfig/aliases I just configured. Is there something similar in FreeBSD? I tried configuring aliases in /etc/rc.conf and running: $ /etc/rc.d/netif restart but that just ended in errors that the route was already configured and so on. Sure I could do all the work manually with ifconfig and route but that's not my question. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ifdown/ifup under FreeBSD?
On Thu, Dec 17, 2009 at 3:46 PM, Igor V. Ruzanov ig...@canmos.ru wrote: |Under RedHat Linux I can configure an interface, routes and so on in |/etc/sysconfig/network-scripts/ifcfg-eth1, |/etc/sysconfig/network-scripts/routes-eth1 then simply run: | |$ ifup eth1 | |and it will set all the routes/netconfig/aliases I just configured. | |Is there something similar in FreeBSD? | |I tried configuring aliases in /etc/rc.conf and running: | |$ /etc/rc.d/netif restart | |but that just ended in errors that the route was already configured |and so on. Sure I could do all the work manually with ifconfig and |route but that's not my question. | Under FreeBSD (as well as under Linux) you could use Zebra (Zebra/Quagga projects) to configure any interfaces/routing specific things. I try to avoid doing complex routing things on my servers. I leave that up to the NOC guys. They can do that on their fancy cisco switches. I want just one route per interface :-) I just wanted to add a seperate route/ip for the second interface, make it permanent by adding it to /etc/rc.conf and tell my FreeBSD to pretend it's booting up by running /etc/rc.d/netif restart. As others pointed out I forgot /etc/rc.d/route. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ifdown/ifup under FreeBSD?
On Thu, Dec 17, 2009 at 3:17 PM, Bas Smeelen b.smee...@ose.nl wrote: Sandra Kachelmann wrote: Under RedHat Linux I can configure an interface, routes and so on in /etc/sysconfig/network-scripts/ifcfg-eth1, /etc/sysconfig/network-scripts/routes-eth1 then simply run: $ ifup eth1 and it will set all the routes/netconfig/aliases I just configured. Is there something similar in FreeBSD? I tried configuring aliases in /etc/rc.conf and running: $ /etc/rc.d/netif restart but that just ended in errors that the route was already configured and so on. Sure I could do all the work manually with ifconfig and route but that's not my question. Usually I do this from remote with /etc/rc.d/netif restart /etc/rc.d/routing restart Maybe you are not root (because of the $ prompt)? #/etc/rc.d/netif restart /etc/rc.d/routing restart This always works for me I was root but I didn't think of '/etc/rc.d/routing' also thanks to Ivan. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
boot0cfg, how to use -m option
I installed the FreeBSD boot loader and have now the following options: F1 Win F2 Win F3 FreeBSD F4 FreeBSD F6 PXE Now I wan't to enable only partition 1 and 3 and PXE (F1, F3, F6). The manpage of boot0cfg says: -m mask Specify slices to be enabled/disabled, where mask is an integer between 0 (no slices enabled) and 0xf (all four slices enabled). which I find very confusing. Could someone explain me what value (and why?) I have to chose to achieve the above mentioned. Thanks for any enlightenment. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
NFS, how to find out which files are used
I have an NFS fileserver and would like to figure out which files are being read/written to. Is there something to find that out? Something similar to samba's 'smbstatus' command. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
disable ipv6 lookups
I'd like to disable ipv6 () lookups entirely since I'm not using ipv6 at all. I tried taking INET6 out of my kernel but i still see lookups being made. I stumbled accross some references in old resolv.conf manpages (it's not in there anymore) about where you can enable inet6 but not on how you can disable them at all. Why are lookups default anyway? I mean hardly anybody is unsing ipv6 other than some geeks over tunnels. I'd love to use it when i can get it w/o tunnel but i'd say 99% of all users out there waste cpu cycles on making lookups even though they don't have ipv6 suport. Sorry if this sounds kinda whiny, I am seriously wondering about this. Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
what is hostuuid, hostid (for)?
I just setup a new server with 7.0-RELEASE and saw the following lines for the fist time when booting the system: Setting hostuuid: 2231232f-4000--2333-aafbb88a88ca. Setting hostid: 0x89e3310b. What exactly are those for? Is it a unique string based on my hardware based on a certain component? CPU maybe? Is it something that could be determined under lets say Linux as well? I am asking because this could become handy as a unique identifier for a piece of equipment (for putting it on stock, re-using, inventory database, ...). Sandra ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Is FreeBSD i386 64bit?
Coming from the Linux world I am pretty new to FreeBSD, please bare with me. I find the FreeBSD handbook pretty useful and I just managed to update 7.0-RELEASE to 7-STABLE from source. I have an Intel core4quad CPU and was wondering if I now have a 64bit FreeBSD. I am a bit confused because from /usr/src/sys/ I only see the directories amd64, ia64 and sparc64 with the number 64 in it. Another question, is setting CPUTYPE advised or discouraged? I am aware about problems if you mix binaries built with different CPU flags; not a problem for me because coming from Gentoo I am used to build everything myself. Sandra -- Mit freundlichen Grüssen Sandra Kachelmann ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]