Weird IP Behaviour
I made changes in my rc.conf file, removing an IP address. I renumbered the aliases so that the others were still sequential from 0, since it was alias_0 that I removed. For some reason, when the system restarts, the removed ip address magically appears at the end of the list when I do ifconfig. What could cause this? 5.4-Release Thanks, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: new file format for log files in 5x tree ??
bunzip2 - Original Message - From: Brent [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, May 02, 2006 9:56 AM Subject: new file format for log files in 5x tree ?? Hello, I just upgraded a server of mine to the 5.4 release noticed that maillogs cron logs are now being zipped into bz2 compressed files. I know this is a stupid question but what do use on the system to unpack these files ? so i cn look at logs ... thank you -- Brent ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Kernel Panic
a) You're not using the kernel.debug, and b) it's not a sensible backtrace. Perhaps it's a side-effect of a) (i.e. you're not running kgdb against the same kernel that panicked). I compiled the kernel using config -g, then rebooted using that kernel. At some point, the system crashes, the dump file is written, and when it reboots, savecore saves the dump to the crash directory. The I use kgdb with this: ns11# kgdb /sys/i386/compile/ADKernel/kernel.debug /var/kcrash/vmcore.5 [GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined symbol ps_pglobal_lookup] GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type show copying to see the conditions. There is absolutely no warranty for GDB. Type show warranty for details. This GDB was configured as i386-marcel-freebsd. #0 0xc055c5e2 in doadump () (kgdb) where #0 0xc055c5e2 in doadump () #1 0xc055cb82 in boot () #2 0xc055ce18 in panic () #3 0xc068502c in trap_fatal () #4 0xc06847d5 in trap () #5 0xc0674baa in calltrap () #6 0x0018 in ?? () #7 0xc2d90010 in ?? () #8 0xc2d90010 in ?? () #9 0x0002 in ?? () #10 0xc283b000 in ?? () #11 0xef1f09d0 in ?? () #12 0xef1f09b8 in ?? () #13 0xc28f55c0 in ?? () #14 0xc28f55c0 in ?? () #15 0x in ?? () #16 0xc283b020 in ?? () #17 0x000c in ?? () #18 0x in ?? () #19 0xc057a8f9 in turnstile_setowner () #20 0xc057abbb in turnstile_wait () #21 0xc0554565 in _mtx_lock_sleep () #22 0xc05543dc in _mtx_lock_flags () #23 0xc2699c68 in ?? () #24 0xc26a2a60 in ?? () #25 0x in ?? () #26 0xc26a0289 in ?? () #27 0x09ef in ?? () #28 0x0004 in ?? () #29 0xc26a2a60 in ?? () #30 0x in ?? () #31 0x4002 in ?? () #32 0xc23d5400 in ?? () #33 0x0644 in ?? () #34 0x in ?? () #35 0x017f in ?? () #36 0x in ?? () #37 0x in ?? () #38 0x in ?? () #39 0x017f in ?? () #40 0x in ?? () #41 0x in ?? () #42 0x in ?? () #43 0x in ?? () #44 0x0801 in ?? () #45 0x in ?? () #46 0x in ?? () #47 0xd22d0014 in ?? () #48 0x0001 in ?? () #49 0x in ?? () #50 0x00020014 in ?? () #51 0x in ?? () #52 0x in ?? () #53 0x in ?? () #54 0x in ?? () #55 0x in ?? () #56 0xc26a2a60 in ?? () #57 0xc25a8c54 in ?? () #58 0x001c in ?? () #59 0x0030 in ?? () #60 0x in ?? () #61 0x265f in ?? () #62 0x in ?? () #63 0x0033 in ?? () #64 0x in ?? () #65 0x in ?? () #66 0x in ?? () #67 0xc25a8c40 in ?? () #68 0xef1f0b3c in ?? () #69 0xc25a8c00 in ?? () #70 0xef1f0b80 in ?? () #71 0xc23d1200 in ?? () #72 0xc23c17a0 in ?? () #73 0xc0735a80 in ip_rsvpd () #74 0x0002 in ?? () #75 0xef1f0b1c in ?? () #76 0xc2696402 in ?? () #77 0xc25a8c40 in ?? () #78 0x0014 in ?? () #79 0xc23d5400 in ?? () #80 0x0001 in ?? () #81 0xef1f0b3c in ?? () #82 0xef1f0b4c in ?? () #83 0xc05ca963 in pfil_run_hooks () TIA, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Help with backtrace
Okay, I finally configured the kernel properly. Here is the backtrace from the
dump. I could use some help deciphering and perhaps some help with things I can
look for that caused this dump.
Thanks,
Steve
(kgdb) backtrace
#0 doadump () at pcpu.h:159
#1 0xc0451f5e in db_fncall (dummy1=0, dummy2=0, dummy3=-1066974357,
dummy4=0xef329824 P\2302ïØ%gÀ[EMAIL PROTECTED]) at
../../../ddb/db_command.c:531
#2 0xc0451d6c in db_command (last_cmdp=0xc0722904, cmd_table=0x0,
aux_cmd_tablep=0xc06e9a7c,
aux_cmd_tablep_end=0xc06e9a98) at ../../../ddb/db_command.c:349
#3 0xc0451e34 in db_command_loop () at ../../../ddb/db_command.c:455
#4 0xc04539c9 in db_trap (type=12, code=0) at ../../../ddb/db_main.c:221
#5 0xc057957e in kdb_trap (type=12, code=0, tf=0xef32998c) at
../../../kern/subr_kdb.c:468
#6 0xc068cc89 in trap_fatal (frame=0xef32998c, eva=108) at
../../../i386/i386/trap.c:812
#7 0xc068c429 in trap (frame=
{tf_fs = 24, tf_es = -1036255216, tf_ds = -1036255216, tf_edi = 2, tf_esi
= -1021628032, tf_ebp = -281896496, tf_isp = -281896520, tf_ebx = -1030367488,
tf_edx = -1030367488, tf_ecx = 0, tf_eax = -1021628000, tf_trapno = 12, tf_err
= 0, tf_eip = -1067973207, tf_cs = 8, tf_eflags = 65543, tf_esp = -1021628032,
tf_ss = -281896464}) at ../../../i386/i386/trap.c:255
#8 0xc067ce2a in calltrap () at ../../../i386/i386/exception.s:140
#9 0x0018 in ?? ()
#10 0xc23c0010 in ?? ()
#11 0xc23c0010 in ?? ()
#12 0x0002 in ?? ()
#13 0xc31b3180 in ?? ()
#14 0xef3299d0 in ?? ()
#15 0xef3299b8 in ?? ()
#16 0xc295d700 in ?? ()
#17 0xc295d700 in ?? ()
#18 0x in ?? ()
#19 0xc31b31a0 in ?? ()
#20 0x000c in ?? ()
#21 0x in ?? ()
#22 0xc05805a9 in turnstile_setowner (ts=0xc295d700, owner=0x0)
at ../../../kern/subr_turnstile.c:367
#23 0xc058086b in turnstile_wait (ts=0xc295d700, lock=0xc26a2a60, owner=0x0)
at ../../../kern/subr_turnstile.c:504
#24 0xc0559f61 in _mtx_lock_sleep (m=0xc26a2a60, td=0xc31b3180, opts=0,
file=0xc26a0289
/usr/src/sys/modules/ipfilter/../../contrib/ipfilter/netinet/fil.c,
line=2543) at ../../../kern/kern_mutex.c:552
#25 0xc0559dd8 in _mtx_lock_flags (m=0x0, opts=0,
file=0xc26a0289
/usr/src/sys/modules/ipfilter/../../contrib/ipfilter/netinet/fil.c,
line=2543) at ../../../kern/kern_mutex.c:273
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Kernel Panic
My server is rebooting frequently throughout the day. No apparent rhyme or reason, different applications can cause it. The following is what I get from one of the backtraces. (kgdb) backtrace #0 0xc055c5e2 in doadump () #1 0xc055cb82 in boot () #2 0xc055ce18 in panic () #3 0xc068502c in trap_fatal () #4 0xc06847d5 in trap () #5 0xc0674baa in calltrap () #6 0xc26d0018 in ?? () #7 0xef230010 in ?? () #8 0xef230010 in ?? () #9 0x0002 in ?? () #10 0xc2b7b300 in ?? () #11 0xef23c900 in ?? () #12 0xef23c8e8 in ?? () #13 0xc2837440 in ?? () #14 0xc2837440 in ?? () #15 0x in ?? () #16 0xc2b7b320 in ?? () #17 0x000c in ?? () #18 0x in ?? () #19 0xc057a8f9 in turnstile_setowner () #20 0xc057abbb in turnstile_wait () #21 0xc0554565 in _mtx_lock_sleep () #22 0xc05543dc in _mtx_lock_flags () It seems that pretty much every time I've traced the dump, it's always the turnstile_setowner that causes the panic. Or am I reading this wrong? Any thoughts or further debugging tips would be appreciated. TIA, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Server time doesn't want to stay set (help!)
My server time is off by exactly 4 hours. (EDT) I've reset it at the BIOS level, only to have it changed somehow during the boot process. I've tried setting and resetting it through sysinstall, but nothing helps. Running ntpdate doesn't change anything either. I've looked in my rc.conf file for anything that might change the time and can't seem to find anything there. Any other places I should look or troubleshoot? Thanks, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Server time doesn't want to stay set (help!)
web# date Mon Apr 3 06:45:56 EDT 2006 - Original Message - From: Jean-Paul Natola [EMAIL PROTECTED] To: Steve Douville [EMAIL PROTECTED]; freebsd-questions@freebsd.org Sent: Monday, April 03, 2006 10:43 AM Subject: RE: Server time doesn't want to stay set (help!) Time zone? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Douville Sent: Monday, April 03, 2006 10:37 AM To: freebsd-questions@freebsd.org Subject: Server time doesn't want to stay set (help!) My server time is off by exactly 4 hours. (EDT) I've reset it at the BIOS level, only to have it changed somehow during the boot process. I've tried setting and resetting it through sysinstall, but nothing helps. Running ntpdate doesn't change anything either. I've looked in my rc.conf file for anything that might change the time and can't seem to find anything there. Any other places I should look or troubleshoot? Thanks, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Server time doesn't want to stay set (help!)
I've done tzsetup a couple of times to no avail. I cp'd the correct file from zoneinfo to localtime, again nothing changed. I've googled like crazy on this, but most all of the suggestions are the same. web# md5 /etc/localtime MD5 (/etc/localtime) = 2735b3768614a853154db25d18cc5d4b web# ls -l /etc/localtime -rw--- 1 root wheel 1252 Apr 3 07:13 /etc/localtime md5 /etc/localtimeweb# web# md5 /etc/localtime MD5 (/etc/localtime) = 2735b3768614a853154db25d18cc5d4b What options in rc.conf should I look for? Thanks, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Server time doesn't want to stay set (help!)
Geeze, this is very frustrating. :-) I rebooted and went into the BIOS. It was set to the correct time. During the boot process, a message comes up and says that the time has been adjusted. When it's finished, the system time is 4 hours behind. I immediately did tzsetup, told it that UTC was not set in the BIOS, then proceeded to select the appropriate timezone. I still get: #web date Mon Apr 3 08:46:13 EDT 2006 (Note, it's 12:46 pm when I ran this.) web# ntpdate 0.north-america.pool.ntp.org Looking for host 0.north-america.pool.ntp.org and service ntp host found : rrcs-24-123-214-97.central.biz.rr.com 3 Apr 08:54:32 ntpdate[1881]: step time server 24.123.214.97 offset 14443.665454 sec The offset even shows the 4 hours my machine is behind, but it doesn't set the time because the difference is too great. (I think) More thoughts?? :-) Thanks, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Server time doesn't want to stay set (Solved)
Okay, I feel pretty stupid... the key is to google with more the pertinent query... The missing piece of information was the message from the kernel... Time adjustment clamped to +1 second The time was trying to be set properly, but couldn't because the kernel.secure.level was set to 2. So, set it back to 0 and then ran the ntpdate again and everything is fine now. Thanks for all of the help. Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Interface Weirdness
I have two interfaces, em0 and em1. Whenever I try to put assign an IP address to em1, the kernel crashes. I've tried different ip's and subnets, all with the same result. How can I find the error that caused it to crash? It isn't in the messages log and I'm not sure where else to look. TIA, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: IP Routing Question
Well, the solution ended up just setting up the rule for the subnet, not the host... route add aaa.bbb.ccc.200/29 aaa.bbb.ccc.200 -interface Had to move some IP addresses, but at least the traffic is going to the right ethernet controller now. Thanks for the help! - Original Message - From: Drew Tomlinson [EMAIL PROTECTED] To: Steve Douville [EMAIL PROTECTED] Cc: FreeBSD Questions freebsd-questions@freebsd.org Sent: Tuesday, February 14, 2006 2:57 PM Subject: Re: IP Routing Question On 2/14/2006 11:43 AM Steve Douville wrote: By default, it sets the netif to em0 OK, then what about 'route add -host aaa.bbb.ccc.209 aaa.bbb.ccc.200'? And if that doesn't work, can I please see 'netstat -rn'? You can obfuscate the IPs if you wish. Cheers, Drew - Original Message - From: Drew Tomlinson [EMAIL PROTECTED] To: Steve Douville [EMAIL PROTECTED] Cc: FreeBSD Questions freebsd-questions@freebsd.org Sent: Tuesday, February 14, 2006 2:40 PM Subject: Re: IP Routing Question On 2/14/2006 11:17 AM Steve Douville wrote: Weird stuff... route add -host aaa.bbb.ccc.209 aaa.bbb.ccc.196 -ifp em1 What happens if you leave off the -ifp em1? Cheers, Drew doesn't work even if i've already set aaa.bbb.ccc.196 link#2 em1 The only way things work well is if the gateway is set to link#2. The only way I can set it to link#2 is if the address was accessed, unsuccessfully, creating a record with link#1 as the gateway and then issuing a route change command to move it to link#2. it'd be much easier if i could just type route add -host aaa.bbb.ccc.xxx link#2 -ifp em1 but it doesn't recognize link#2 as a valid address, even though it uses it in the table by default!! Haven't tried the ipfilter yet. Maybe i'll give that a whirl, too. - Original Message - From: Drew Tomlinson [EMAIL PROTECTED] To: Steve Douville [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Sent: Tuesday, February 14, 2006 1:45 PM Subject: Re: IP Routing Question What happens with a simple 'route add certain ip address aaa.bbb.ccc.196? Or am I misinterpreting what you wish to achieve? HTH, Drew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
IP Routing Question
I'm trying to set up the routing table to force requests to certain IP addresses to use a particular ethernet card. I've used the route command in a number of ways, but still can't come up with how to force to use em1 instead of em0, with the right gateway. em0 is aaa.bbb.ccc.207 em1 is aaa.bbb.ccc.200 Both have netmask of 255.255.255.0 em0 goes to the main port, gateway aaa.bbb.ccc.195. em1 goes to a switch, which is aaa.bbb.ccc.196, the gateway to other ip's on the switch. What I want to end up with is: aaa.bbb.ccc.196link#2em1 aaa.bbb.ccc.209link#2em1 I've tried lots of combinations, using the -ifp flag to force em1, but the only way I can get the gateway to say link#2 is to ping the ip first, whereas it gets put in the table even though it's not found, and then doing a route change. I need some way to put this in rc.local so that it's set up when booted. Any ideas? Let me know if more info is needed. TIA, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: IP Routing Question
By default, it sets the netif to em0 - Original Message - From: Drew Tomlinson [EMAIL PROTECTED] To: Steve Douville [EMAIL PROTECTED] Cc: FreeBSD Questions freebsd-questions@freebsd.org Sent: Tuesday, February 14, 2006 2:40 PM Subject: Re: IP Routing Question On 2/14/2006 11:17 AM Steve Douville wrote: Weird stuff... route add -host aaa.bbb.ccc.209 aaa.bbb.ccc.196 -ifp em1 What happens if you leave off the -ifp em1? Cheers, Drew doesn't work even if i've already set aaa.bbb.ccc.196 link#2 em1 The only way things work well is if the gateway is set to link#2. The only way I can set it to link#2 is if the address was accessed, unsuccessfully, creating a record with link#1 as the gateway and then issuing a route change command to move it to link#2. it'd be much easier if i could just type route add -host aaa.bbb.ccc.xxx link#2 -ifp em1 but it doesn't recognize link#2 as a valid address, even though it uses it in the table by default!! Haven't tried the ipfilter yet. Maybe i'll give that a whirl, too. - Original Message - From: Drew Tomlinson [EMAIL PROTECTED] To: Steve Douville [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Sent: Tuesday, February 14, 2006 1:45 PM Subject: Re: IP Routing Question What happens with a simple 'route add certain ip address aaa.bbb.ccc.196? Or am I misinterpreting what you wish to achieve? HTH, Drew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: IP Routing Question
196 is the switch... 209 is a port on the switch - Original Message - From: John Webster [EMAIL PROTECTED] To: Drew Tomlinson [EMAIL PROTECTED] Cc: Steve Douville [EMAIL PROTECTED]; FreeBSD Questions freebsd-questions@freebsd.org Sent: Tuesday, February 14, 2006 4:08 PM Subject: Re: IP Routing Question ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Connecting to serial port
I'm trying to connect to the serial port of a Dell PowerConnect 3024. I've connected a null modem cable between them. During boot, this is what is happening: Feb 11 00:34:17 server2 kernel: sio0: configured irq 4 not in bitmap of probed irqs 0 Feb 11 00:34:17 server2 kernel: sio0: port may not be enabled Feb 11 00:34:17 server2 kernel: sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Feb 11 00:34:17 server2 kernel: sio0: type 8250 or not responding Can anyone shed some light on what I might have done wrong or where to continue looking? Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error While Tuning the Kernel
I removed a number of devices that I know I don't have, basically all the scsi devices, printer devices, etc, careful not to remove anything I wasn't absolutely sure I didn't have. The config went fine, no errors. The make ran for a while then gave me these errors... linking kernel umass.o(.text+0x15af): In function `umass_cam_attach_sim': : undefined reference to `cam_simq_alloc' umass.o(.text+0x15e1): In function `umass_cam_attach_sim': : undefined reference to `cam_sim_alloc' umass.o(.text+0x15f1): In function `umass_cam_attach_sim': : undefined reference to `cam_simq_free' umass.o(.text+0x160a): In function `umass_cam_attach_sim': : undefined reference to `xpt_bus_register' umass.o(.text+0x162f): In function `umass_cam_rescan_callback': : undefined reference to `xpt_free_path' umass.o(.text+0x1677): In function `umass_cam_rescan': : undefined reference to `xpt_periph' umass.o(.text+0x1680): In function `umass_cam_rescan': : undefined reference to `xpt_create_path' umass.o(.text+0x1693): In function `umass_cam_rescan': : undefined reference to `xpt_setup_ccb' umass.o(.text+0x16ae): In function `umass_cam_rescan': : undefined reference to `xpt_action' umass.o(.text+0x1750): In function `umass_cam_detach_sim': : undefined reference to `xpt_bus_deregister' umass.o(.text+0x1766): In function `umass_cam_detach_sim': : undefined reference to `cam_sim_free' umass.o(.text+0x17a5): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1805): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1823): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x18a8): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1967): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x199d): more undefined references to `xpt_done' follow umass.o(.text+0x1b46): In function `umass_cam_action': : undefined reference to `cam_calc_geometry' umass.o(.text+0x1b4c): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1b5e): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1b71): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1bab): In function `umass_cam_cb': : undefined reference to `xpt_done' umass.o(.text+0x1be7): In function `umass_cam_cb': : undefined reference to `xpt_done' umass.o(.text+0x1c99): more undefined references to `xpt_done' follow *** Error code 1 Am I just missing a lib file or something? TIA, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error While Tuning the Kernel
No, you removed too much from your kernel config (this is a FAQ; google would have shown the answer). Kris Yep... didn't catch one of the dependancies... thanks! - Original Message - From: Kris Kennaway [EMAIL PROTECTED] To: Steve Douville [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Sent: Tuesday, February 07, 2006 9:20 PM Subject: Re: Error While Tuning the Kernel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Building Identical Configurations
I'd like to build and tune one server and then create an iso of the configuration so that I can easily build additional machines in the same configuration. I've tried googling but perhaps I just haven't used the right search parameters to find the info I'm looking for. I have figured out being able to create the iso using mkisofs and creating a bootable disk. I'm just not sure what part of the file system I need and then how to go about building the new machines once I have the disk ready. Can anyone point me to some sites or if it's easier than that, just give me some idea? Thanks! Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Building Identical Configurations
I'd like to build and tune one server and then create an iso of the configuration so that I can easily build additional machines in the same configuration. I've tried googling but perhaps I just haven't used the right search parameters to find the info I'm looking for. I have figured out being able to create the iso using mkisofs and creating a bootable disk. I'm just not sure what part of the file system I need and then how to go about building the new machines once I have the disk ready. Can anyone point me to some sites or if it's easier than that, just give me some idea? Thanks! Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
