Re: ppp problems : Modem connection issues on FreeBSD 5.2.1
Niraj Kumar wrote: JJB wrote: First of all you are using an development version of Freebsd which snip I did a bit of tweaking to compile this program (which was for openbsd) . snip I will post ppp.conf in next mail .(I am currently away from that machine) . For me ,the problem appears to be in ppp program and not in eciadsl . Here is ppp.conf : # # PPP Sample Configuration File to use with the Speedtouch USB # Written by Francois Rogler [EMAIL PROTECTED] # # You will have to fill in : # - login # - password # - VPI.VCI as defined by your provider. # Check the file vpivci for some commom values. # `adsl' profile is for the default PPPoA mode # `pppoe' profile is for the bridged PPPoE mode # # $Id: ppp.conf.sample,v 1.5 2003/07/23 03:36:41 rogler Exp $ # default: ident user-ppp VERSION (built COMPILATIONDATE) set log Phase Chat IPCP CCP tun command set ifaddr 10.0.0.1/0 10.0.0.2/0 disable pred1 deflate lqr# compression features denypred1 deflate lqr# line quality reporting disable ipv6 # turn off ipv6 challenge adsl: set authname ** set authkey ** set openmode active 3 set device !/root/eciadsl/eciadsl-usermode-bsd-0.10/pppoeci -v 1 -f /var/log/pppoeci.log -alt 4 -mode LLC_RFC2364 accept chap set speed sync set timeout 0 set redial 15 1 set dial add default HISADDR enable dns pppoe: set authname [EMAIL PROTECTED] set authkey motihari123 set device PPPoE:tap0 set speed sync set timeout 0 set redial 15 1 set dial set login add default HISADDR enable dns Try adding this to your ppp.conf disable pred1 deflate lqr# compression features denypred1 deflate lqr# line quality reporting disable ipv6 # turn off ipv6 challenge Will try this and let you know the results. I am getting the same error even after adding these options . I am posting eciadsl.conf below : VID1=0f70 PID1=0001 VID2=0915 PID2=0002 MODE=LLC_RFC2364 VCI=32 VPI=1 FIRMWARE=/etc/eciadsl/firmware00.bin SYNCH=/etc/eciadsl/synch07.bin PPPD_USER=* PPPD_PASSWD=*** USE_DHCP=no USE_STATICIP=no STATICIP= GATEWAY= MODEM=Other PROVIDER=Other DNS1=202.56.250.5 DNS2= As an guide, I would plug an ms/windows box into your DSL modem and see what it says to verify you really need PPPoA. I know this for sure because as I said in my first mail , I am using the same program on Linux (on the same box with same modem ) to successfully connect to the provider. FreeBSD 'user ppp' also has pppoa and pppoe options. Most DSL modems work with pppoe. Read man ppp and the official handbook at http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoa.html -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Niraj Kumar Sent: Tuesday, April 13, 2004 2:57 AM To: [EMAIL PROTECTED] Subject: ppp problems : Modem connection issues on FreeBSD 5.2.1 Hi, I have a DSL modem with Globespan chipset. I am trying to use eciadsl usemode program ( http://eciadsl.flashtux.org/download.php?lang=en ) on FreeBSD 5.2.1 (AMD Athlon 2600 , A7N8X-VM motherboard). However , I am getting the following error and ppp connect failed . See the copy/paste from the terminal below : # ppp -background adsl Working in background mode Using interface: tun0 Child failed (errdead) After some more digging , I was able to enable logging . (See log below) From whatever I see in the log , I guess the culprit is the line which says : Too many LCP NAKs sent - abandoning negotiation . But I don't know how to address this problem . Could anybody please help me on this . NOTE that I am able to connect to my provider using the 0.8 version of usermode eciadsl program on Linux , on the same machine . Also , is there any other program which can be used on FreeBSD for this purpose ? FYI , I have to use *ppp over ATM ( PPPoA* == RFC2364 ) for this connection . If you need any more info , please let me know. thanks Niraj -ppp.log --- Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: Connected! Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: opening - dial Apr 8 20:00:53 ppp[638]: tun0: Chat: deflink: Dial attempt 1 of 1 Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: dial - carrier Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: carrier - login Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: login - lcp Apr 8 20:00:58 ppp[638]: tun0: Phase: deflink: Too many LCP NAKs sent - abandoning negotiation Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Disconnected! Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: lcp - logout Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: logout - hangup Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Disconnected! Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Connect time: 6 secs: 1106 octets in, 558 octets out Apr 8 20:00:59 ppp[638]: tun0
ppp problems : Modem connection issues on FreeBSD 5.2.1
Hi, I have a DSL modem with Globespan chipset. I am trying to use eciadsl usemode program ( http://eciadsl.flashtux.org/download.php?lang=en ) on FreeBSD 5.2.1 (AMD Athlon 2600 , A7N8X-VM motherboard). However , I am getting the following error and ppp connect failed . See the copy/paste from the terminal below : # ppp -background adsl Working in background mode Using interface: tun0 Child failed (errdead) After some more digging , I was able to enable logging . (See log below) From whatever I see in the log , I guess the culprit is the line which says : Too many LCP NAKs sent - abandoning negotiation . But I don't know how to address this problem . Could anybody please help me on this . NOTE that I am able to connect to my provider using the 0.8 version of usermode eciadsl program on Linux , on the same machine . Also , is there any other program which can be used on FreeBSD for this purpose ? FYI , I have to use *ppp over ATM ( PPPoA* == RFC2364 ) for this connection . If you need any more info , please let me know. thanks Niraj -ppp.log --- Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: Connected! Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: opening - dial Apr 8 20:00:53 ppp[638]: tun0: Chat: deflink: Dial attempt 1 of 1 Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: dial - carrier Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: carrier - login Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: login - lcp Apr 8 20:00:58 ppp[638]: tun0: Phase: deflink: Too many LCP NAKs sent - abandoning negotiation Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Disconnected! Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: lcp - logout Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: logout - hangup Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Disconnected! Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Connect time: 6 secs: 1106 octets in, 558 octets out Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: 56 packets in, 32 packets out Apr 8 20:00:59 ppp[638]: tun0: Phase: total 277 bytes/sec, peak 35 bytes/sec on Thu Apr 8 20:00:58 2004 Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: HUPing 640 Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: hangup - closed Apr 8 20:00:59 ppp[638]: tun0: Phase: bundle: Dead Apr 8 20:00:59 ppp[638]: tun0: Phase: PPP Terminated (normal). Apr 8 20:00:59 ppp[637]: tun0: Phase: Parent: Child failed (errdead) Apr 8 20:00:59 ppp[638]: tun0: Chat: Parent notified of failure -- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: UFS mounted on linux
Rahul Sawarkar wrote: Hello I have a freebsd ufs partition, that I access from linux using the following command: mount /dev/hda2 /mnt -t ufs -o ufstype=44bsd This is fine for 4.x series . However , FreeBSD 5.x uses ufs2 by default . For mounting ufs2 , look at these patches : http://ufs-linux.sourceforge.net Funnie: All the files and directories created by the /stand/sysinstall or the freeBSD install CD are visible. But the recent files I downloaded from the net, or any file created while booted in FreeBSD using touch filename for instance are not to be seen in Linux. Moving or copying files has no effect.Changing attributes using chflags noopaque has no effect. Any tips ? Correct me if I am wrong , but linux's ufs implementation is not very robust . Besides , there are no good tools for ufs fs on linux. That is why I have started this work (link above). Regards Niraj Rgrds freebsd-questions users: Please cc to: [EMAIL PROTECTED] as I'm not subscribed. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: help with acpi on nforce
jason wrote: I have been to the how-to site giving on the list before, but I have a problem I could not find answers to. Here is a copy of what I get: snip ] Table header is invalid! Couldn't get table from the file barton# Does anyone have a acpidump from a nforce2 product that has good headers I could try? I'll post my asl file if anyone would like to take a look at it. I am not sure , but if it helps , sometimes back I had put up the output of # acpidump -t -d niraj.asl acpidump: RSDT entry 2 is corrupt at http://www.niraj.4t.com/freebsd/ Look at file niraj.asl.txt . I have an asus a7nx8-vm (nForce2 ). dmesg output is also there. Niraj ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Hi I am interested in getting freebsd and i have a fewquestions about this good operating system!
Joe Falcone wrote: Dear Freebsd Owners and Developers, I am interested in getting freebsd for server functions and it is confusing me on how to use it and how to install it! Is there a possible way to download a .iso cd image of freebsd? It sounds very interesting and i would think it would be a great operating system enviornment to use. If you could help me with the web and pop3 server functions that would help me with my expirence with your operating system. And please send a list of features and how it is used in everyday life i would be most interested in getting freebsd (x86-compatable) os. Please have a look at FreeBSD Handbook . http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html This would answer most of your questions. Sincerily, Joseph Nicholas Falcone Niraj ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Linux patch for reading ufs2
Hi ,
Okay ,I was able to reproduce the problem at my machine.
I have a feeling that the this error can be avoided if you use
CONFIG_LBD in your kernel configuration.
( Device Drivers - Block Devices - Support for large block devices )
Please use this option and see whether the problem is still there or not .
Meanwhile , I am trying to figure out a better/complete solution.
Niraj
Vladimir Kushnir wrote:
Hi,
This is /usr/ports/distfiles/emovix-0.8.0.tar.gz - regular file, ls -li:
1842130 -rw-r--r-- 1 vkushnir wheel 8636010 Jan 5
23:43 /usr/ports/distfiles/emovix-0.8.0.tar.gz
I don't know precisely what's relevant but after (lengthy indeed) debugging
information Linux gives:
..
Feb 15 18:33:58 localhost kernel: (fs/ufs/inode.c, 543), ufs_read_inode:
ENTER, ino 1842130
Feb 15 18:33:58 localhost kernel: (fs/ufs/inode.c, 636), ufs_read_inode:
Reading ufs2 inode, ino 184213
Feb 15 18:33:58 localhost kernel: (fs/ufs/inode.c, 704), ufs_read_inode: EXIT
Feb 15 18:34:06 localhost kernel: attempt to access beyond end of device
Feb 15 18:34:06 localhost kernel: hde10: rw=0, want=2147483880, limit=42732580
Feb 15 18:34:06 localhost kernel: Buffer I/O error on device hde10, logical
block 536870969
Feb 15 18:34:06 localhost kernel: attempt to access beyond end of device
Feb 15 18:34:06 localhost kernel: hde10: rw=0, want=2147483884, limit=42732580
Feb 15 18:34:06 localhost kernel: Buffer I/O error on device hde10, logical
block 536870970
Feb 15 18:34:06 localhost kernel: attempt to access beyond end of device
Feb 15 18:34:06 localhost kernel: hde10: rw=0, want=2147483888, limit=42732580
Feb 15 18:34:06 localhost kernel: Buffer I/O error on device hde10, logical
block 536870971
Feb 15 18:34:06 localhost kernel: attempt to access beyond end of device
Feb 15 18:34:06 localhost kernel: hde10: rw=0, want=2147483892, limit=42732580
Feb 15 18:34:06 localhost kernel: Buffer I/O error on device hde10, logical
block 536870972
and so on - several blocks in this region (here hd10 == ad0s2e, /usr, mounted
under Linux with -r -t ufs -o ufstype=ufs2). And finally it refuses to copy
or untar this file. This is the only information I cn see there.
At the same time when I boot into FreeBSD - no problems whatsoever.
On Monday 16 February 2004 06:22, Niraj Kumar wrote:
Hi,
Thanks for testing this stuff.
Vladimir Kushnir wrote:
First off - thanks a bunch, now I don't need to reboot every time I
forgot to copy some files to Linux.
Tested and works here: ad0: 57241MB WDC WD600JB-00CRA1;
ad0s2 - current -CURRENT (everything in UFS2);
ad0s5 - Mandrake 9.2 + kernel 2.6.2 + p{1,2}.txt
There is a file though (emovix distro in ports/distfiles) which Linux
gives an input/output error on. More precisely, it gives me
attempt to access beyond end of device
Buffer I/O error on device hde10, logical block ... (several blocks).
Under FreeBSD - no errors on this file so it doesn't seem like HD
problem.
Well , what kind of file is this ? Is it a normal file or some device
file , or symobolic link etc ...?
Can you send me the 'dmesg' output for this error (if there is any) ?
FYI , I have enabled some debugging messages in this patch , so you
should be getting a lot
of debugging messages in 'dmesg' .
Any other input on this problem is welcome.
Niraj
Regards,
Vladimir
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Linux patch for reading ufs2
Hi,
Thanks for testing this stuff.
Vladimir Kushnir wrote:
First off - thanks a bunch, now I don't need to reboot every time I forgot to
copy some files to Linux.
Tested and works here: ad0: 57241MB WDC WD600JB-00CRA1;
ad0s2 - current -CURRENT (everything in UFS2);
ad0s5 - Mandrake 9.2 + kernel 2.6.2 + p{1,2}.txt
There is a file though (emovix distro in ports/distfiles) which Linux gives an
input/output error on. More precisely, it gives me
attempt to access beyond end of device
Buffer I/O error on device hde10, logical block ... (several blocks).
Under FreeBSD - no errors on this file so it doesn't seem like HD problem.
Well , what kind of file is this ? Is it a normal file or some device
file , or symobolic link etc ...?
Can you send me the 'dmesg' output for this error (if there is any) ?
FYI , I have enabled some debugging messages in this patch , so you
should be getting a lot
of debugging messages in 'dmesg' .
Any other input on this problem is welcome.
Niraj
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Linux patch for reading ufs2
Hi, I am trying to create some Linux patches to be able to read ufs2. Interested (those who are having both Linux and FreeBSD on same box) may try them . The work-in-progress patches are available from http://ufs-linux.sourceforge.net/ufs2/p1.txt http://ufs-linux.sourceforge.net/ufs2/p2.txt Currently , these provides the bare minimum ufs2 support and that also for Read-Only . It would be good if somebody tests them and see the problems. Niraj ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problem with netgraph
1. when i use printf statement to print my own string with the message in nge_rcvdata function in ng_echo.c i face the problem thatobject code has not changed. and when i use ngctl write command with the -f filename option it just print the file contents . what is the proper procedure to add your own message which is written in the ng_echo.c file when i use ngctl write command and where the data is stored. 2. where i can find more about the netgraph the man page help is not enough for the beginner niraj Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problem with ng_echo
1. when i use printf statement to print my own string with the message in nge_rcvdata function in ng_echo.c i face the problem that object code has not changed. and when i use ngctl write command with the -f filename option it just print the file contents . what is the proper procedure to add your own message which is written in the ng_echo.c file when i use ngctl write command and where the data is stored. 2. where i can find more about the netgraph the man page help is not enough for the beginner niraj Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problem in netgraph
1. when i use printf statement to print my own string with the message in nge_rcvdata function in ng_echo.c i face the problem thatobject code has not changed. and when i use ngctl write command with the -f filename option it just print the file contents . what is the proper procedure to add your own message which is written in the ng_echo.c file when i use ngctl write command and where the data is stored. 2. where i can find more about the netgraph the man page help is not enough for the beginner thanks for ur help niraj Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problem in kernel compiling with netgraph option
when i add these line in my kernel file options NETGRAPH options NETGRAPH_ETHER options NETGRAPH_SOCKET after using ngctl show i see ed0 as ethernet node but when i attempt to insert a tee node between lower and upper hook y using ngctl mkpeer ed0: tee lower right i am facing this problem module-register : module netgraph already exist linker_file_sysinit netgraph.ko failed to register Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problem with netgraph
1. when in compile the kernel with options NETGRAPH and after that when i see the nodes withngctl list it doesn't show the ethernet interface in the node list . i am the beginner in this field 2. i want to insert a module between the ng_ether lower node and the upper node . where i can more on this . Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
problem in ng_ether
i want to insert a tee node between upper and the lower node of the ng_ether. i am using freebsd 4.7 . i am the beginner . please help Yahoo! India Mobile: Download the latest polyphonic ringtones. Go to http://in.mobile.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
compiling kernel with netgraph option
1. how can we compile kernel in freebsd 4.7 with netgraph option. 2 what is the procedure to add ur own module between the lower and the higher node of the ng_ether. 3 where i can find more about this niraj Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
maximum ip address
how many ip address can i assign to my single machine( maximum limit ).how can i check this in freebsd thanks in advance niraj Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ip addressing in freebsd
how many ip address can i assign to my single machine( maximum limit ).how can i check this in freebsd thanks in advance niraj Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
shared objects(.so files)
i want to create shared objects (.so files) in freebsd what is the command and the parameters for that. niraj Yahoo! India Matrimony: Find your partner online.Post your profile. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ip addressing in freebsd
1. in freebsd we can have two ip address for a single host like 2.0.0.1 17.0.0.1 by using ifconfig but why can't we assign two ip like 2.0.0.1 2.0.0.2 (i know that both r in same network) 2 so where is the problem in resolving the ip addressing of the host 3 where i can find more about this (links) 4. where is the code of the ip resolution in thekernel niraj Yahoo! India Matrimony: Find your partner online.Post your profile. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
implementation of bpf
i want to know how to implement a simple bpf filter on the freebsd i am using bsd4.7 version and i know the instruction set of the bfp virutal machine but i dont know how to implement that and to check whether that particular bpf is working or not so u could explain the functioning of bpf with example then i would be thankful to u thank in advance Niraj Yahoo! India Matrimony: Find your partner online.Post your profile. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Use of the BOOT.FLP floppy disk.
I guess you have to use kern.flp and mfsroot.flp for installing FreeBSD 5.x. It is clearly mentioned in the readme.txt file . Niraj Arne Engø wrote: Hello, I have been using FreeBSD earlier, but am new to the 5.0-Release. The boot.flp image seems to be twice the size of an ordinary floppy, while the other four images in the floppies-directory fits on exactly one disk each. What are the BOOT.FLP disk for ? How is it to be used, and how do I use it on a 1.44 - floppy disk drive system ??? I would appreciate a speedy reply, as I'm trying to set up a new system with Freebsd 5.0-release. Sincerely Arne S. Engø ; [EMAIL PROTECTED] Ny versjon av Yahoo! Messenger Nye ikoner og bakgrunner, webkamera med superkvalitet og dobbelt så morsom ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
