Re: rl0 discard oversize frame
Amer H. Alhabsi a écrit : Philippe Laquet wrote: Hi Amer, Could you send an ifconfig -a ? It may occur if your MTU doesn't match Amer H. Alhabsi a écrit : Hi, The network card that came with the PC (Broadcom NetXtreme Gigabit Ethernet) was not recognized by sysinstall. So I bought a real tek based card that works fine. But when I run dmesg, I get lots of these lines (almost 900): rl0: discard oversize frame (ether type 0 flags 3 len 1532 max 1514) Can someone please advise what can be done to stop that. I'm using FreeBSD 6.2 release. Thanks, ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Thanks for the reply. Here is the output of ifconfig -a rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 options=8VLAN_MTU inet 172.22.15.39 netmask 0x broadcast 172.22.255.255 ether 00:e0:4c:ef:04:87 media: Ethernet autoselect (100baseTX full-duplex) status: active lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 OK, You may try to increase your MTU by using ifconfig rl0 mtu 1580 (for example) - Do not forget to add this option in /etc/rc.conf (for boot settings) If it does not solve the problem, the problem could be due to your network interface and the RL driver itself. In that case, you have to shut down the interface and remount it, I agree that it is not a proper solution but I saw it on a newsgroup. Hope this help! Kind Regards. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rl0 discard oversize frame
Hi Amer, Could you send an ifconfig -a ? It may occur if your MTU doesn't match Amer H. Alhabsi a écrit : Hi, The network card that came with the PC (Broadcom NetXtreme Gigabit Ethernet) was not recognized by sysinstall. So I bought a real tek based card that works fine. But when I run dmesg, I get lots of these lines (almost 900): rl0: discard oversize frame (ether type 0 flags 3 len 1532 max 1514) Can someone please advise what can be done to stop that. I'm using FreeBSD 6.2 release. Thanks, ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rl0 discard oversize frame
Philippe Laquet wrote: Hi Amer, Could you send an ifconfig -a ? It may occur if your MTU doesn't match Amer H. Alhabsi a écrit : Hi, The network card that came with the PC (Broadcom NetXtreme Gigabit Ethernet) was not recognized by sysinstall. So I bought a real tek based card that works fine. But when I run dmesg, I get lots of these lines (almost 900): rl0: discard oversize frame (ether type 0 flags 3 len 1532 max 1514) Can someone please advise what can be done to stop that. I'm using FreeBSD 6.2 release. Thanks, ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Thanks for the reply. Here is the output of ifconfig -a rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 options=8VLAN_MTU inet 172.22.15.39 netmask 0x broadcast 172.22.255.255 ether 00:e0:4c:ef:04:87 media: Ethernet autoselect (100baseTX full-duplex) status: active lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rl0: discard oversize frame
I also have the errors showing up in my periodic logs but they dont seem to cause me actual network drops. rl0: discard oversize frame (ether type e14c flags 3 len 1722 max 1514) rl0: discard oversize frame (ether type 1 flags 3 len 36860 max 1514) Chris On 5/23/05, Jack Raats [EMAIL PROTECTED] wrote: I'm running FreeBSD 5.4-STABLE. At this moment I'm getting all kind of network losses due to the error rl0: discard oversize frame Google showed that a lot of PC suffers form this, but I didn't fine the cure :-( Can anyone help me with a cure? Met vriendelijke groeten Jack Raats ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
