Re: shared object needed by courier MTA
On Fri, 20 Jul 2007 22:27:01 -0700 (PDT)
johan Hartono [EMAIL PROTECTED] wrote:
From: johan Hartono [EMAIL PROTECTED]
To: 'Norberto Meijome' [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Subject: RE: shared object needed by courier MTA
Date: Fri, 20 Jul 2007 22:27:01 -0700 (PDT)
Dear norberto,
Thanks a lot for your email. I tried your suggestion
and install 6.2-RELEASE
and it solved my problem. I just realize that they
don't include
libstdc++.so.5 in 5.5-RELEASE but put libstdc++.so.4
instead while they put
it in 6.2-RELEASE. Btw showmodules command is an
internal courier's command
to check whether my installation is complete or not.
I tried to build the whole package from the source
code but it gives me
error in configure phase. It says can't find
pcre/pcre.h in my system even
though I have installed PCRE-7.1. Any hint?
Hi johan,
when you say 'installing from source' - are you using the ports system ?
as in /usr/ports
If you are not, you are **STRONGLY** suggested you learn how to use it instead.
You can definitely build code from source by downloading some product tarball
and building it from scratch, but you need to know your way around the system.
That's what the ports are for - dead easy software management.
You can read about it here :
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html
you can also install from precompiled binaries called 'packages', but you get
a standard build, rather than one you may want to configure to your needs:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/packages-using.html
As you can see, I'm very newbie in this BSD stuff.
start by reading the Handbook. You can find it in your system under
/usr/share/doc/en_US.ISO8859-1/books/handbook/
or in freebsd.org ,
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/
A
lot more home works and
reading I need to do. But Thanks a lot once again for
your email though.
np at all :)
I'm from Semarang, Indonesia and I would be very happy
to be able to meet
another FreeBSD guru in my area.
I am not a guru by far, but I am in the APAC area, in Sydney. :)
_
{Beto|Norberto|Numard} Meijome
Always listen to experts. They'll tell you what can't be done, and why.
Then do it.
Robert A. Heinlein
I speak for myself, not my employer. Contents may be hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them is worse. You have been
Warned.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: shared object needed by courier MTA
Dear norberto,
Thanks a lot for your email. I tried your suggestion
and install 6.2-RELEASE
and it solved my problem. I just realize that they
don't include
libstdc++.so.5 in 5.5-RELEASE but put libstdc++.so.4
instead while they put
it in 6.2-RELEASE. Btw showmodules command is an
internal courier's command
to check whether my installation is complete or not.
I tried to build the whole package from the source
code but it gives me
error in configure phase. It says can't find
pcre/pcre.h in my system even
though I have installed PCRE-7.1. Any hint?
As you can see, I'm very newbie in this BSD stuff. A
lot more home works and
reading I need to do. But Thanks a lot once again for
your email though.
I'm from Semarang, Indonesia and I would be very happy
to be able to meet
another FreeBSD guru in my area.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Norberto Meijome
Sent: Thursday, July 19, 2007 12:52 PM
To: johan Hartono
Cc: freebsd-questions@freebsd.org
Subject: Re: shared object needed by courier MTA
On Tue, 17 Jul 2007 08:41:08 -0700 (PDT)
johan Hartono [EMAIL PROTECTED] wrote:
Dear all,
I was trying to make a working mail server using
freebsd5.5-release and
courier MTA suites.
(you should move up to 6.x if you can, specially since
it's a new
installation )
What I need from this box basically are pop3 server,
smtpserver, web admin
and webmail.
I install FreeBSD using #8216;developer#8217;
canned andpull out
#8216;ports#8217; packages.
After the installation, I add these packages using
pkg_addcommand in the
exact order.
'libltdl-1.5.22_2'
'libexecinfo-1.1_1.tbz'
'mime-support-3.39.1'
'pcre-7.1'
'm4-1.4.9'
'perl-5.8.8'
'gmake-3.81_2'
'gettext-0.16.1_3'
'libiconv-1.9.2_2'
'libtool-1.5.22_2'
'help2man_1.36.4_1'
'P5-gettext-1.05_1'
'P5-Net-CIDR-0.11'
'sysconftool-0.15'
'autoconf-2.59_2'
'automake-1.9.6_1'
'pkg-config-0.21'
'glib-2.12.12_2'
'gamin-0.1.8_1'
'courier-authlib-base-0.59.3'
'courier-0.54.0'
Every time I try to check the installation using
showmodulescommand, I got
this message
where is this command 'showmodules' from ?
#8220;/libexec/ld-elf.so.1: Shared
objectlibstdc++.so.5 not found,
required by showmodules#8221;
I'm running 6.2-STABLE and I have libstdc++ as part of
the base OS:
/usr/lib/libstdc++.so.5
I don't know whether 5.5 had libstdc++.so.5 - you can
check in /usr/lib/ to
see what version is there. I think the problem stems
from the fact that you
used binary packages (pkg_add -r) rather than building
from source via the
ports system. Other than upgrading the OS to 6.x, you
can try to see if
those packages you need are included in the 5.5 CD .
Or build from source.
Can anyone point out what sins I have done badly and
how towork around
this problem?
I#8217;m very sorry for my poor language since
English isnot my native
language.
your English is fine :)
I very appreciate any help you could give me.
Best regards
Johan Hartono
-
Choose the right car based on your needs. Check out
Yahoo! Autos new Car
Finder tool.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
_
{Beto|Norberto|Numard} Meijome
Which is worse: ignorance or apathy?
Don't know. Don't care.
I speak for myself, not my employer. Contents may be
hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them
is worse. You have been
Warned.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for
today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: shared object needed by courier MTA
On Tue, 17 Jul 2007 08:41:08 -0700 (PDT)
johan Hartono [EMAIL PROTECTED] wrote:
Dear all,
I was trying to make a working mail server using freebsd5.5-release and
courier MTA suites.
(you should move up to 6.x if you can, specially since it's a new installation )
What I need from this box basically are pop3 server, smtpserver, web admin
and webmail.
I install FreeBSD using #8216;developer#8217; canned andpull out
#8216;ports#8217; packages.
After the installation, I add these packages using pkg_addcommand in the
exact order.
'libltdl-1.5.22_2'
'libexecinfo-1.1_1.tbz'
'mime-support-3.39.1'
'pcre-7.1'
'm4-1.4.9'
'perl-5.8.8'
'gmake-3.81_2'
'gettext-0.16.1_3'
'libiconv-1.9.2_2'
'libtool-1.5.22_2'
'help2man_1.36.4_1'
'P5-gettext-1.05_1'
'P5-Net-CIDR-0.11'
'sysconftool-0.15'
'autoconf-2.59_2'
'automake-1.9.6_1'
'pkg-config-0.21'
'glib-2.12.12_2'
'gamin-0.1.8_1'
'courier-authlib-base-0.59.3'
'courier-0.54.0'
Every time I try to check the installation using showmodulescommand, I got
this message
where is this command 'showmodules' from ?
#8220;/libexec/ld-elf.so.1: Shared objectlibstdc++.so.5 not found,
required by showmodules#8221;
I'm running 6.2-STABLE and I have libstdc++ as part of the base OS:
/usr/lib/libstdc++.so.5
I don't know whether 5.5 had libstdc++.so.5 - you can check in /usr/lib/ to see
what version is there. I think the problem stems from the fact that you used
binary packages (pkg_add -r) rather than building from source via the ports
system. Other than upgrading the OS to 6.x, you can try to see if those
packages you need are included in the 5.5 CD . Or build from source.
Can anyone point out what sins I have done badly and how towork around this
problem?
I#8217;m very sorry for my poor language since English isnot my native
language.
your English is fine :)
I very appreciate any help you could give me.
Best regards
Johan Hartono
-
Choose the right car based on your needs. Check out Yahoo! Autos new Car
Finder tool.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
_
{Beto|Norberto|Numard} Meijome
Which is worse: ignorance or apathy?
Don't know. Don't care.
I speak for myself, not my employer. Contents may be hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them is worse. You have been
Warned.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
shared object needed by courier MTA
Dear all, I was trying to make a working mail server using freebsd5.5-release and courier MTA suites. What I need from this box basically are pop3 server, smtpserver, web admin and webmail. I install FreeBSD using #8216;developer#8217; canned andpull out #8216;ports#8217; packages. After the installation, I add these packages using pkg_addcommand in the exact order. 'libltdl-1.5.22_2' 'libexecinfo-1.1_1.tbz' 'mime-support-3.39.1' 'pcre-7.1' 'm4-1.4.9' 'perl-5.8.8' 'gmake-3.81_2' 'gettext-0.16.1_3' 'libiconv-1.9.2_2' 'libtool-1.5.22_2' 'help2man_1.36.4_1' 'P5-gettext-1.05_1' 'P5-Net-CIDR-0.11' 'sysconftool-0.15' 'autoconf-2.59_2' 'automake-1.9.6_1' 'pkg-config-0.21' 'glib-2.12.12_2' 'gamin-0.1.8_1' 'courier-authlib-base-0.59.3' 'courier-0.54.0' Every time I try to check the installation using showmodulescommand, I got this message #8220;/libexec/ld-elf.so.1: Shared objectlibstdc++.so.5 not found, required by showmodules#8221; Can anyone point out what sins I have done badly and how towork around this problem? I#8217;m very sorry for my poor language since English isnot my native language. I very appreciate any help you could give me. Best regards Johan Hartono - Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
