Re: /dev/sa0 DSS-4 drive help
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I also get the following message from dmesg: (sa0:ahc0:0:6:0): Invalid request. Fixed block device requests must be a multiple of 1 bytes Regards, William Bailey. Pro-Net Internet Services Ltd. http://www.pro-net.co.uk/ William Bailey wrote: | Hi All, | | I am currently trying to get a DSS-4 type drive working on a 5.2.1 | RELEASE system but am haveing no joy at all. From dmesg at boot the | device if found as | | sa0 at ahc0 bus 0 target 6 lun 0 | sa0: ARCHIVE Python 06408-XXX 8130 Removable Sequential Access SCSI-3 | device | sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) | | | 'mt status' gives the following (first 2 lines) | | Mode Density Blocksize bpi Compression | Current: 0x26:DDS-4 1024 bytes 97000DCLZ | | I have also tried setting blocksize to variable without any success (mt | blocksize 0). | | Now when i try to use dump or tar the system will just sit there untill | i get a kernel: Dump Card State Ends | message which then locks out the tape drive untill. | | For an example the command 'tar -cf /dev/sa0 /root/*-supfile' gave the | following dump... | | For reference ls -l /root/*-supfile returns... | | -r--r--r-- 1 root wheel 2761 Apr 9 17:23 /root/doc-supfile | -r--r--r-- 1 root wheel 3831 Apr 9 17:22 /root/ports-supfile | -r--r--r-- 1 root wheel 3957 Apr 9 17:22 /root/stable-supfile | | | | Dump Card State Begins | ahc0: Dumping Card State while idle, at SEQADDR 0x9 | Card was paused | ACCUM = 0x0, SINDEX = 0x14, DINDEX = 0xe4, ARG_2 = 0x0 | HCNT = 0x0 SCBPTR = 0x1e | SCSIPHASE[0x0] SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] | LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) | SBLKCTL[0xa]:(SELWIDE|SELBUSB) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) | SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x0] | SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) | SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) SXFRCTL0[0x80]:(DFON) | DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) | STACK: 0x0 0x163 0x109 0x3 | SCB count = 40 | Kernel NEXTQSCB = 32 | Card NEXTQSCB = 32 | QINFIFO entries: | Waiting Queue entries: | Disconnected Queue entries: 1:7 | QOUTFIFO entries: | Sequencer Free SCB List: 30 20 14 12 23 28 26 18 11 16 25 0 29 24 17 5 | 21 22 27 15 6 2 3 31 19 4 13 10 7 9 8 | Sequencer SCB Info: | ~ 0 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 1 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x67] | SCB_LUN[0x0] SCB_TAG[0x7] | ~ 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 4 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 9 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 12 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 16 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 17 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 18 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 19 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 20 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 21 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 22 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 23 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 24 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] | SCB_LUN[0x0] SCB_TAG[0xff] | ~ 25 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB)
Re: /dev/sa0 DSS-4 drive help
William Bailey wrote: I also get the following message from dmesg: (sa0:ahc0:0:6:0): Invalid request. Fixed block device requests must be a multiple of 1 bytes | I am currently trying to get a DSS-4 type drive working on a 5.2.1 | RELEASE system but am haveing no joy at all. From dmesg at boot the | device if found as | | sa0 at ahc0 bus 0 target 6 lun 0 | sa0: ARCHIVE Python 06408-XXX 8130 Removable Sequential Access SCSI-3 | device | sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) | | Hi. You haven't had any response yet so a long shot might be in order. I see you're using an adaptec scsi controller. I had dreadful problems with a brand new AHA29610 under 5.2, where lots of errors that seemed to point to a bad tape drive disappeared when I swapped the controller for an old Tekram DC390 I had lying around. I haven't tried the AHA again with 5.2.1 to see whether these probs have been cured. PWR. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
/dev/sa0 DSS-4 drive help
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi All, I am currently trying to get a DSS-4 type drive working on a 5.2.1 RELEASE system but am haveing no joy at all. From dmesg at boot the device if found as sa0 at ahc0 bus 0 target 6 lun 0 sa0: ARCHIVE Python 06408-XXX 8130 Removable Sequential Access SCSI-3 device sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) 'mt status' gives the following (first 2 lines) Mode Density Blocksize bpi Compression Current: 0x26:DDS-4 1024 bytes 97000DCLZ I have also tried setting blocksize to variable without any success (mt blocksize 0). Now when i try to use dump or tar the system will just sit there untill i get a kernel: Dump Card State Ends message which then locks out the tape drive untill. For an example the command 'tar -cf /dev/sa0 /root/*-supfile' gave the following dump... For reference ls -l /root/*-supfile returns... - -r--r--r-- 1 root wheel 2761 Apr 9 17:23 /root/doc-supfile - -r--r--r-- 1 root wheel 3831 Apr 9 17:22 /root/ports-supfile - -r--r--r-- 1 root wheel 3957 Apr 9 17:22 /root/stable-supfile | Dump Card State Begins ahc0: Dumping Card State while idle, at SEQADDR 0x9 Card was paused ACCUM = 0x0, SINDEX = 0x14, DINDEX = 0xe4, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x1e SCSIPHASE[0x0] SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0xa]:(SELWIDE|SELBUSB) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) STACK: 0x0 0x163 0x109 0x3 SCB count = 40 Kernel NEXTQSCB = 32 Card NEXTQSCB = 32 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 1:7 QOUTFIFO entries: Sequencer Free SCB List: 30 20 14 12 23 28 26 18 11 16 25 0 29 24 17 5 21 22 27 15 6 2 3 31 19 4 13 10 7 9 8 Sequencer SCB Info: ~ 0 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 1 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0] SCB_TAG[0x7] ~ 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 4 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 9 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 12 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 16 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 17 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 18 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 19 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 20 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 21 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 22 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 23 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 24 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 25 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 26 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 27 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 28 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 29 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 30
/dev/sa0 DSS-4 drive help
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi All, I am currently trying to get a DSS-4 type drive working on a 5.2.1 RELEASE system but am haveing no joy at all. From dmesg at boot the device if found as sa0 at ahc0 bus 0 target 6 lun 0 sa0: ARCHIVE Python 06408-XXX 8130 Removable Sequential Access SCSI-3 device sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) 'mt status' gives the following (first 2 lines) Mode Density Blocksize bpi Compression Current: 0x26:DDS-4 1024 bytes 97000DCLZ I have also tried setting blocksize to variable without any success (mt blocksize 0). Now when i try to use dump or tar the system will just sit there untill i get a kernel: Dump Card State Ends message which then locks out the tape drive untill. For an example the command 'tar -cf /dev/sa0 /root/*-supfile' gave the following dump... For reference ls -l /root/*-supfile returns... - -r--r--r-- 1 root wheel 2761 Apr 9 17:23 /root/doc-supfile - -r--r--r-- 1 root wheel 3831 Apr 9 17:22 /root/ports-supfile - -r--r--r-- 1 root wheel 3957 Apr 9 17:22 /root/stable-supfile | Dump Card State Begins ahc0: Dumping Card State while idle, at SEQADDR 0x9 Card was paused ACCUM = 0x0, SINDEX = 0x14, DINDEX = 0xe4, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x1e SCSIPHASE[0x0] SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0xa]:(SELWIDE|SELBUSB) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) STACK: 0x0 0x163 0x109 0x3 SCB count = 40 Kernel NEXTQSCB = 32 Card NEXTQSCB = 32 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 1:7 QOUTFIFO entries: Sequencer Free SCB List: 30 20 14 12 23 28 26 18 11 16 25 0 29 24 17 5 21 22 27 15 6 2 3 31 19 4 13 10 7 9 8 Sequencer SCB Info: ~ 0 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 1 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0] SCB_TAG[0x7] ~ 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 4 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 9 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 12 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 16 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 17 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 18 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 19 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 20 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 21 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 22 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 23 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 24 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 25 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 26 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 27 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 28 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 29 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27] SCB_LUN[0x0] SCB_TAG[0xff] ~ 30
