I got a SoundBlaster Live! because it was listed as a known working
piece of hardware. Apparently this is a newer version of the board that
isn't supported yet. Getting it to work is becoming a PITA beyond what
I have the time and willpower to put in right now.
Is there a piece of sound
I don't get the pcm0 lines that section 7.2.2 in the manual talks
about. cat /dev/sndstat returns:
FreeBSD Audio Driver (newpcm)
Installed devices:
and nothing else.
The driver isn't attached to the device, either because the pci id's
don't match or the card isn't using an emu10k*
Dylan Cochran wrote:
I don't get the pcm0 lines that section 7.2.2 in the manual talks
about. cat /dev/sndstat returns:
FreeBSD Audio Driver (newpcm)
Installed devices:
and nothing else.
The driver isn't attached to the device, either because the pci id's
don't match or the card
Dylan Cochran wrote:
the pci id output that pciconf provides and modify the #define
EMU10K1_PCI_ID0x00021102 line in /usr/src/sys/dev/sound/pci/emu10k1.c
Well, at least I got a new response in dmesg out of that one:
pcm0: Creative EMU10K1 port 0xcf00-0xcf1f irq 18 at device 10.0 on
pci3
Dylan Cochran wrote:
I don't get the pcm0 lines that section 7.2.2 in the manual talks
about. cat /dev/sndstat returns:
FreeBSD Audio Driver (newpcm)
Installed devices:
and nothing else.
The driver isn't attached to the device, either because the pci id's
don't match or the card
On 7/22/06, Rich Demanowski [EMAIL PROTECTED] wrote:
Dylan Cochran wrote:
I don't get the pcm0 lines that section 7.2.2 in the manual talks
about. cat /dev/sndstat returns:
FreeBSD Audio Driver (newpcm)
Installed devices:
and nothing else.
The driver isn't attached to the
I just dropped a SoundBlaster Live! card into my box, and have followed
the directions in the handbook and the man pages.
The following lines are in the compiled kernel:
device sound
device snd_emu10k1
I don't get the pcm0 lines that section 7.2.2 in the manual talks
about. cat
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
I just dropped a SoundBlaster Live! card into my box, and have followed
the directions in the handbook and the man pages.
The following lines are in the compiled kernel:
device sound
device snd_emu10k1
I don't get the pcm0 lines that
Derrick Ryalls wrote:
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
I just dropped a SoundBlaster Live! card into my box, and have followed
the directions in the handbook and the man pages.
The following lines are in the compiled kernel:
device sound
device snd_emu10k1
I don't
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
Derrick Ryalls wrote:
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
I just dropped a SoundBlaster Live! card into my box, and have followed
the directions in the handbook and the man pages.
The following lines are in the compiled
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
Derrick Ryalls wrote:
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
Derrick Ryalls wrote:
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
I just dropped a SoundBlaster Live! card into my box, and have
followed
the
Derrick Ryalls wrote:
On 7/21/06, Rich Demanowski [EMAIL PROTECTED] wrote:
I just dropped a SoundBlaster Live! card into my box, and have followed
the directions in the handbook and the man pages.
The following lines are in the compiled kernel:
device sound
device snd_emu10k1
I don't
Hi,
I am trying to enable the builtin sound card present in Dell
Dimension 8300 but cant seem to get it done. As far as I remember, in
FreeBSD 5.3 it can be done simply by having the following two options in
the kernel config file:
device sound
device snd_ich
However, FreeBSD 5.1 does
13 matches
Mail list logo
