Re: External USB drive on Sun HW
Anyone have any ideas here? On 1/13/06, Aaron Burruss [EMAIL PROTECTED] wrote: Hi there, I'm looking for some help on a problem I'm having with a new setup I've got... I'm running sparc64 6.0 and also have an external USB drive enclosure with a 250GB IDE drive in it. The drive is formatted as a BSD partition (formatting done on another box). I've got the following in my kernel: # USB support device uhci # UHCI PCI-USB interface device ohci # OHCI PCI-USB interface device usb # USB Bus (required) device ugen # Generic device uhid # Human Interface Devices device umass # Disks/Mass storage - Requires scbus and da I.m seeing this in dmesg: [EMAIL PROTECTED] dmesg |grep -i umass umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT [EMAIL PROTECTED] dmesg|grep -i usb ohci0: Sun PCIO-2 USB controller mem 0xe200-0xe2007fff at device 12.3 on pci1 usb0: OHCI version 1.0, legacy support usb0: Sun PCIO-2 USB controller on ohci0 usb0: USB revision 1.0 ohci1: Sun PCIO-2 USB controller mem 0xe500-0xe5007fff at device 5.3on pci1 usb1: OHCI version 1.0, legacy support usb1: Sun PCIO-2 USB controller on ohci1 usb1: USB revision 1.0 umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 usbdevs shows: [EMAIL PROTECTED] usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x), (0x108e)(0x), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x), (0x108e)(0x), rev 1.00 port 1 addr 2: full speed, self powered, config 1, product 0x0702(0x0702), vendor 0x05e3(0x05e3), rev 0.33 port 2 powered port 3 powered port 4 powered My primary hard drives are da0 and da1 (all the how-to's say that daX should be where I mount.. but /dev only has my two primary drives: -su-2.05b# ls -la /dev/da* crw-r- 1 root operator 4, 16 Dec 20 20:11 /dev/da0 crw-r- 1 root operator 4, 18 Dec 20 12:11 /dev/da0a crw-r- 1 root operator 4, 19 Dec 20 20:11 /dev/da0b crw-r- 1 root operator 4, 20 Dec 20 20:11 /dev/da0c crw-r- 1 root operator 4, 17 Dec 20 20:11 /dev/da1 crw-r- 1 root operator 4, 21 Dec 20 20:11 /dev/da1c crw-r- 1 root operator 4, 22 Dec 20 12:11 /dev/da1d -su-2.05b# dmesg|grep da.: da0: FUJITSU MAN3367M SUN36G 1502 Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) da1: FUJITSU MAN3367M SUN36G 1502 Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) I can plug this into my AMD64 running FreeBSD 6, and it comes up with no problems. I THINK I'm probably missing something totally dumb... Anyone got any help for me on this? Yah.. I know.. get an i386 box with IDE drives. :) This is a small 1U box, and fits in my closet well. so I'd like to use it if possible. Thanks!!! Aaron ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: External USB drive on Sun HW
In the last episode (Jan 16), Aaron Burruss said: Anyone have any ideas here? On 1/13/06, Aaron Burruss [EMAIL PROTECTED] wrote: Hi there, I'm looking for some help on a problem I'm having with a new setup I've got... I'm running sparc64 6.0 and also have an external USB drive enclosure with a 250GB IDE drive in it. The drive is formatted as a BSD partition (formatting done on another box). I've got the following in my kernel: # USB support device uhci # UHCI PCI-USB interface device ohci # OHCI PCI-USB interface device usb # USB Bus (required) device ugen # Generic device uhid # Human Interface Devices device umass # Disks/Mass storage - Requires scbus and da I.m seeing this in dmesg: [EMAIL PROTECTED] dmesg |grep -i umass umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT [EMAIL PROTECTED] dmesg|grep -i usb ohci0: Sun PCIO-2 USB controller mem 0xe200-0xe2007fff at device 12.3 on pci1 usb0: OHCI version 1.0, legacy support usb0: Sun PCIO-2 USB controller on ohci0 usb0: USB revision 1.0 ohci1: Sun PCIO-2 USB controller mem 0xe500-0xe5007fff at device 5.3on pci1 usb1: OHCI version 1.0, legacy support usb1: Sun PCIO-2 USB controller on ohci1 usb1: USB revision 1.0 umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 usbdevs shows: [EMAIL PROTECTED] usbdevs -v Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x), (0x108e)(0x), rev 1.00 port 1 addr 2: full speed, self powered, config 1, product 0x0702(0x0702), vendor 0x05e3(0x05e3), rev 0.33 port 2 powered port 3 powered port 4 powered There's already a quirk entry for that vendor/product combo so someone has gotten it working.. Maybe a bug in the ohci driver when talking to Sun PCIO-2 hardware? -- Dan Nelson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
External USB drive on Sun HW
Hi there, I'm looking for some help on a problem I'm having with a new setup I've got... I'm running sparc64 6.0 and also have an external USB drive enclosure with a 250GB IDE drive in it. The drive is formatted as a BSD partition (formatting done on another box). I've got the following in my kernel: # USB support device uhci # UHCI PCI-USB interface device ohci # OHCI PCI-USB interface device usb # USB Bus (required) device ugen # Generic device uhid # Human Interface Devices device umass # Disks/Mass storage - Requires scbus and da I.m seeing this in dmesg: [EMAIL PROTECTED] dmesg |grep -i umass umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT [EMAIL PROTECTED] dmesg|grep -i usb ohci0: Sun PCIO-2 USB controller mem 0xe200-0xe2007fff at device 12.3on pci1 usb0: OHCI version 1.0, legacy support usb0: Sun PCIO-2 USB controller on ohci0 usb0: USB revision 1.0 ohci1: Sun PCIO-2 USB controller mem 0xe500-0xe5007fff at device 5.3on pci1 usb1: OHCI version 1.0, legacy support usb1: Sun PCIO-2 USB controller on ohci1 usb1: USB revision 1.0 umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 I see this in usbdevs output: [EMAIL PROTECTED] dmesg|grep -i usb ohci0: Sun PCIO-2 USB controller mem 0xe200-0xe2007fff at device 12.3on pci1 usb0: OHCI version 1.0, legacy support usb0: Sun PCIO-2 USB controller on ohci0 usb0: USB revision 1.0 ohci1: Sun PCIO-2 USB controller mem 0xe500-0xe5007fff at device 5.3on pci1 usb1: OHCI version 1.0, legacy support usb1: Sun PCIO-2 USB controller on ohci1 usb1: USB revision 1.0 umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 My primary hard drives are da0 and da1 (all the how-to's say that daX should be where I mount.. but /dev only has my two primary drives: -su-2.05b# ls -la /dev/da* crw-r- 1 root operator 4, 16 Dec 20 20:11 /dev/da0 crw-r- 1 root operator 4, 18 Dec 20 12:11 /dev/da0a crw-r- 1 root operator 4, 19 Dec 20 20:11 /dev/da0b crw-r- 1 root operator 4, 20 Dec 20 20:11 /dev/da0c crw-r- 1 root operator 4, 17 Dec 20 20:11 /dev/da1 crw-r- 1 root operator 4, 21 Dec 20 20:11 /dev/da1c crw-r- 1 root operator 4, 22 Dec 20 12:11 /dev/da1d -su-2.05b# dmesg|grep da.: da0: FUJITSU MAN3367M SUN36G 1502 Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) da1: FUJITSU MAN3367M SUN36G 1502 Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) I can plug this into my AMD64 running FreeBSD 6, and it comes up with no problems. I THINK I'm probably missing something totally dumb... Anyone got any help for me on this? Yah.. I know.. get an i386 box with IDE drives. :) This is a small 1U box, and fits in my closet well. so I'd like to use it if possible. Thanks!!! Aaron ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]