Re: Missing machdep.hlt_logical_cpus on hyperthreading..
Stefan Cars wrote: Hi, i'm reposting this since I didn't get any answer at all... I'm having a problem, sysctl can't find machdep.hlt_logical_cpus. My machine is a dual xeon with hyperthreading enabled, running 4.9. I also would like to know what that Warning: Pentium 4 CPU: PSE disabled means. Stefan, In your kernel configuration file, you need following: optionsSMP# Symmetric MultiProcessor Kernel optionsAPIC_IO# Symmetric (APIC) I/O Then machdep.hlt_logical_cpus is in your sysctl. Can't help you with the PSE disabled thing. Cheers, Rob. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Missing machdep.hlt_logical_cpus on hyperthreading..
Hi, i'm reposting this since I didn't get any answer at all... I'm having a problem, sysctl can't find machdep.hlt_logical_cpus. My machine is a dual xeon with hyperthreading enabled, running 4.9. I also would like to know what that Warning: Pentium 4 CPU: PSE disabled means. See below: sysctl: unknown oid 'machdep.hlt_logical_cpus' FreeBSD guldivar.globalwire.se 4.9-RELEASE FreeBSD 4.9-RELEASE #1: Mon Nov 24 14:59:32 CET 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/FLASHZGI i386 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #1: Mon Nov 24 14:59:32 CET 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/FLASHZGI Timecounter i8254 frequency 1193182 Hz CPU: Intel(R) XEON(TM) CPU 1.80GHz (1799.80-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf24 Stepping = 4 Features=0x3febfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM Hyperthreading: 2 logical CPUs real memory = 1073676288 (1048512K bytes) config di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config q avail memory = 1041534976 (1017124K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 - irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee0 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee0 cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee0 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee0 io0 (APIC): apic id: 8, version: 0x00178020, at 0xfec0 io1 (APIC): apic id: 9, version: 0x00178020, at 0xfec8 io2 (APIC): apic id: 10, version: 0x00178020, at 0xfec80400 Preloaded elf kernel kernel at 0xc0414000. Preloaded userconfig_script /boot/kernel.conf at 0xc041409c. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 14 entries at 0xc00f3f20 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard IOAPIC #0 intpin 16 - irq 2 IOAPIC #0 intpin 18 - irq 9 IOAPIC #0 intpin 17 - irq 10 pci0: PCI bus on pcib0 pcib1: PCI to PCI bridge (vendor=8086 device=2543) at device 2.0 on pci0 pci2: PCI bus on pcib1 pci2: unknown card (vendor=0x8086, dev=0x1461) at 28.0 pcib2: PCI to PCI bridge (vendor=8086 device=1460) at device 29.0 on pci2 IOAPIC #2 intpin 0 - irq 11 pci4: PCI bus on pcib2 pci4: unknown card (vendor=0x8086, dev=0x1008) at 1.0 irq 11 pcib3: PCI to PCI bridge (vendor=1044 device=a500) at device 3.0 on pci4 pci5: PCI bus on pcib3 asr0: Adaptec Caching SCSI RAID mem 0xf800-0xfbff irq 11 at device 3.1 on pci4 asr0: major=154 asr0: ADAPTEC 3410S FW Rev. 370F, 4 channel, 256 CCBs, Protocol I2O pci2: unknown card (vendor=0x8086, dev=0x1461) at 30.0 pcib4: PCI to PCI bridge (vendor=8086 device=1460) at device 31.0 on pci2 pci3: PCI bus on pcib4 pci0: UHCI USB controller at 29.0 irq 2 pcib5: Intel 82801BA/BAM (ICH2) Hub to PCI bridge at device 30.0 on pci0 pci1: PCI bus on pcib5 pci1: ATI Mach64-GR graphics accelerator at 2.0 irq 9 fxp0: Intel 82550 Pro/100 Ethernet port 0xc880-0xc8bf mem 0xfe6a-0xfe6bfff f,0xfe6fe000-0xfe6fefff irq 10 at device 3.0 on pci1 fxp0: Ethernet address 00:e0:81:20:f7:7c inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: PCI to ISA bridge (vendor=8086 device=2480) at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH3 ATA100 controller port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0 x7 irq 9 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: unknown card (vendor=0x8086, dev=0x2483) at 31.3 irq 10 orm0: Option ROMs at iomem 0xc-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcf7ff,0xc f800-0xd0fff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured
Missing machdep.hlt_logical_cpus on hyperthreading..
Hi! I'm having a problem, sysctl can't find machdep.hlt_logical_cpus. My machine is a dual xeon with hyperthreading enabled, running 4.9. I also would like to know what that Warning: Pentium 4 CPU: PSE disabled means. See below: sysctl: unknown oid 'machdep.hlt_logical_cpus' FreeBSD guldivar.globalwire.se 4.9-RELEASE FreeBSD 4.9-RELEASE #1: Mon Nov 24 14:59:32 CET 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/FLASHZGI i386 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #1: Mon Nov 24 14:59:32 CET 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/FLASHZGI Timecounter i8254 frequency 1193182 Hz CPU: Intel(R) XEON(TM) CPU 1.80GHz (1799.80-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf24 Stepping = 4 Features=0x3febfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM Hyperthreading: 2 logical CPUs real memory = 1073676288 (1048512K bytes) config di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config q avail memory = 1041534976 (1017124K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 - irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee0 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee0 cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee0 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee0 io0 (APIC): apic id: 8, version: 0x00178020, at 0xfec0 io1 (APIC): apic id: 9, version: 0x00178020, at 0xfec8 io2 (APIC): apic id: 10, version: 0x00178020, at 0xfec80400 Preloaded elf kernel kernel at 0xc0414000. Preloaded userconfig_script /boot/kernel.conf at 0xc041409c. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 14 entries at 0xc00f3f20 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard IOAPIC #0 intpin 16 - irq 2 IOAPIC #0 intpin 18 - irq 9 IOAPIC #0 intpin 17 - irq 10 pci0: PCI bus on pcib0 pcib1: PCI to PCI bridge (vendor=8086 device=2543) at device 2.0 on pci0 pci2: PCI bus on pcib1 pci2: unknown card (vendor=0x8086, dev=0x1461) at 28.0 pcib2: PCI to PCI bridge (vendor=8086 device=1460) at device 29.0 on pci2 IOAPIC #2 intpin 0 - irq 11 pci4: PCI bus on pcib2 pci4: unknown card (vendor=0x8086, dev=0x1008) at 1.0 irq 11 pcib3: PCI to PCI bridge (vendor=1044 device=a500) at device 3.0 on pci4 pci5: PCI bus on pcib3 asr0: Adaptec Caching SCSI RAID mem 0xf800-0xfbff irq 11 at device 3.1 on pci4 asr0: major=154 asr0: ADAPTEC 3410S FW Rev. 370F, 4 channel, 256 CCBs, Protocol I2O pci2: unknown card (vendor=0x8086, dev=0x1461) at 30.0 pcib4: PCI to PCI bridge (vendor=8086 device=1460) at device 31.0 on pci2 pci3: PCI bus on pcib4 pci0: UHCI USB controller at 29.0 irq 2 pcib5: Intel 82801BA/BAM (ICH2) Hub to PCI bridge at device 30.0 on pci0 pci1: PCI bus on pcib5 pci1: ATI Mach64-GR graphics accelerator at 2.0 irq 9 fxp0: Intel 82550 Pro/100 Ethernet port 0xc880-0xc8bf mem 0xfe6a-0xfe6bfff f,0xfe6fe000-0xfe6fefff irq 10 at device 3.0 on pci1 fxp0: Ethernet address 00:e0:81:20:f7:7c inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: PCI to ISA bridge (vendor=8086 device=2480) at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH3 ATA100 controller port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0 x7 irq 9 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: unknown card (vendor=0x8086, dev=0x2483) at 31.3 irq 10 orm0: Option ROMs at iomem 0xc-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcf7ff,0xc f800-0xd0fff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not
