riday, January 09, 2004 2:01 PM
Subject: Re: Problems adding a second hard drive
> On Thu, 8 Jan 2004, Keith McKay wrote:
>
> > I got a 3.1Gig
> > hard drive and thought I'd add it to the FreBSD box and since 4.9 had
just
> > been released I'd start from scratch and in
On Thu, 8 Jan 2004, Keith McKay wrote:
> I got a 3.1Gig
> hard drive and thought I'd add it to the FreBSD box and since 4.9 had just
> been released I'd start from scratch and install that as well.
Is the second HD just for data?
If so you could use /stand/sysinstall to add it. After it is setup
> It took me a little time to figure how to do this but I managed (or so I
> thought) to install FreeBSD. However although I can see both drives
during
> the installation if I do a df all that is displayed is ad0s with no
> information on ad2s. Also I cannot install any more programms since it
s
On Thu, 8 Jan 2004 21:02:01 -
"Keith McKay" <[EMAIL PROTECTED]> wrote:
> Hi all
>
> I had installed FreeBSD 4.7 on an old pentium I 100MHz with 128Meg RAM
> and a 2Gig Hard drive. It worked, albeit a little slow but perfectly
> usable for experimenting with and learningFreeBSD, and surfing t
Hi all
I had installed FreeBSD 4.7 on an old pentium I 100MHz with 128Meg RAM and a
2Gig Hard drive. It worked, albeit a little slow but perfectly usable for
experimenting with and learningFreeBSD, and surfing the net. I got a 3.1Gig
hard drive and thought I'd add it to the FreBSD box and since
