th no mention of BSD.
The installation to 16Gb SCSI ID:0 on a Dell PowerEdge
Scalable Disk Subsystem 100 appears to go well, but always
results in "Boot Error".
Any help would be appreciated, especially directing me to most
appropriate discussion list/archive.
Tks,
-- Gary
Per olof Ljungmark intersonic.se> writes:
> ...
> Try a verbose boot.
I forgot to mention:
$ uname -a
FreeBSD localhost.localdomain 9.1-RC1 FreeBSD 9.1-RC1 #0: Tue Aug 14 03:56:40
UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
I set Verbose ON and put hw.usb.ugen.d
On 2012-09-28 14:16, jb wrote:
Hi,
the boot of my notebook Lenovo TP r61i stops (sometimes) after usbus6.
$ dmesg
...
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
...skipping...
hdaa0: at nid 1 on hdacc0
pcm0: at nid 16,17 and 20 on
hdaa0
unknown: at nid 2
on hdacc0 (no d
Hi,
the boot of my notebook Lenovo TP r61i stops (sometimes) after usbus6.
$ dmesg
...
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
...skipping...
hdaa0: at nid 1 on hdacc0
pcm0: at nid 16,17 and 20 on
hdaa0
unknown: at nid 2
on hdacc0 (no driver attached)
usbus0: 12Mbps Fu
On Sunday 27 March 2011 09:26:26 Franci Nabalanci wrote:
> I boot in the single user mode and when I run /sbin fsck -y I got
> "Permission denied". The same is if I /mount -w / and I gor Permission
> Denied.
>
>
> On Sun, Mar 27, 2011 at 9:11 AM, Erich Dollansky <
>
> erichfreebsdl...@ovitrap.co
I boot in the single user mode and when I run /sbin fsck -y I got
"Permission denied". The same is if I /mount -w / and I gor Permission
Denied.
On Sun, Mar 27, 2011 at 9:11 AM, Erich Dollansky <
erichfreebsdl...@ovitrap.com> wrote:
> Hi,
>
> On Sunday 27 March 2011 20:17:09 Franci Nabalanci wro
Hi,
On Sunday 27 March 2011 20:17:09 Franci Nabalanci wrote:
> Hi!
>
> My system is FreeBSD releaese 8.2.
> I installed KDE 4.6.1 and run it. And I updated ATI drivers too.
> When I start KDE It freeze when I try to change a background picture.. After
> restart of computer I got an error and boot
Hi!
My system is FreeBSD releaese 8.2.
I installed KDE 4.6.1 and run it. And I updated ATI drivers too.
When I start KDE It freeze when I try to change a background picture.. After
restart of computer I got an error and boot in the single mode.
/dev/ad0s1a: LINK COUNT DIR I=376823 OWNER= ROOT mode
Hi, Folks
I got this systemic error on a new install of PCBSD 1.3. Below:
Jan 8 09:54:58 Growler kernel: acd0: FAILURE - unknown CMD (0x03)
ILLEGAL REQUEST asc=0x20 ascq=0x00
Jan 8 09:55:29 Growler last message repeated 15 times
Jan 8 09:57:31 Growler last message repeated 60 times
Jan 8
Hi, Folks
I got this systemic error on a new install of PCBSD 1.3. Below:
Jan 8 09:54:58 Growler kernel: acd0: FAILURE - unknown CMD (0x03)
ILLEGAL REQUEST asc=0x20 ascq=0x00
Jan 8 09:55:29 Growler last message repeated 15 times
Jan 8 09:57:31 Growler last message repeated 60 times
Jan 8
On 2006-01-12 15:20, fbsd_user <[EMAIL PROTECTED]> wrote:
>On Jan 12, 2006, at 11:03 AM, fbsd_user wrote:
>> fstab is bad and boot drops me into "manual root filesystems spec"
>>
>> I answer ufs:ad0s1a
>> and get these messages
>> "warning / was not properly dismounted"
>> "warning R/W of / denied
rly shutdown / the
filesystems improperly dismounted.
-Garrett
___
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Garrett
Cooper
Sent: Thursday, January 12, 2006 3:02 PM
To: freebsd-questions@freebsd.org
Subject: Re: have bad fstab causing boot error
nope that
On Jan 12, 2006, at 11:03 AM, fbsd_user wrote:
fstab is bad and boot drops me into "manual root filesystems spec"
I answer ufs:ad0s1a
and get these messages
"warning / was not properly dismounted"
"warning R/W of / denied. filesystem is not clean run fcsk"
when I enter fsck command nothing h
fstab is bad and boot drops me into "manual root filesystems spec"
I answer ufs:ad0s1a
and get these messages
"warning / was not properly dismounted"
"warning R/W of / denied. filesystem is not clean run fcsk"
when I enter fsck command nothing happens.
What is procedure to follow here???
___
On 2005-12-24 11:31, rajoor <[EMAIL PROTECTED]> wrote:
> Gayn & Giorgos,
>
> I figured it out late last night. I used the install cd to
> enter "fixit" mode. Mounting the hard drive failed with
> "operation not permitted" message. "fsck" failed to complaining
> about no fstab. After googling I fina
Gayn Winters wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of rajoor
Sent: Thursday, December 22, 2005 8:21 PM
To: Giorgos Keramidas
Cc: freebsd-questions@freebsd.org
Subject: Re: Boot error
Giorgos Keramidas wrote:
On 2005-12-23 14
On 2005-12-23 15:20, rajoor <[EMAIL PROTECTED]> wrote:
>Giorgos Keramidas wrote:
>>On 2005-12-23 14:18, Ariane & Ron Joordens <[EMAIL PROTECTED]> wrote:
>>> My FreeBSD 6.0 computer refuses to boot. It gets to the
>>> screen where it pauses for 10 seconds and gives you the
>>> choice of 8 boot optio
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of rajoor
> Sent: Thursday, December 22, 2005 8:21 PM
> To: Giorgos Keramidas
> Cc: freebsd-questions@freebsd.org
> Subject: Re: Boot error
>
>
> Giorgos Keramidas wr
Giorgos Keramidas wrote:
On 2005-12-23 14:18, Ariane & Ron Joordens <[EMAIL PROTECTED]> wrote:
Afternoon All,
My FreeBSD 6.0 computer refuses to boot. It gets to the screen where it
pauses for 10 seconds and gives you the choice of 8 boot options, and
then...nothing!
Choosing the default o
On 2005-12-23 14:18, Ariane & Ron Joordens <[EMAIL PROTECTED]> wrote:
> Afternoon All,
>
> My FreeBSD 6.0 computer refuses to boot. It gets to the screen where it
> pauses for 10 seconds and gives you the choice of 8 boot options, and
> then...nothing!
>
> Choosing the default option shows a single
Afternoon All,
My FreeBSD 6.0 computer refuses to boot. It gets to the screen where it
pauses for 10 seconds and gives you the choice of 8 boot options, and
then...nothing!
Choosing the default option shows a single line "/boot/kernel/acpi.ko
text= etc,..." then the next line shows "|", and
On Friday 25 March 2005 12:14 am, Ann Lee wrote:
> Hi All,
>
> When I try to boot from CD-ROM to install my FreeBSD 4.8 i386
>
> my computer stops to work. I do:
>
> 1) Booting from CD-ROM
> 2) Skip kernel configuration.
> 3) Then I see:
>
> [...something before...]
> ppc0: FIFO with 16/16/8 bytes
Hi All,
When I try to boot from CD-ROM to install my FreeBSD 4.8 i386
my computer stops to work. I do:
1) Booting from CD-ROM
2) Skip kernel configuration.
3) Then I see:
[...something before...]
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: on ppc0
plip0: on ppbus0
[That is all. Now he stop
[EMAIL PROTECTED] wrote:
> Hey there. I'm trying to do a fresh install of 5.3, but can't get
> past this error:
>
>ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f
> irq10 on isa0
>ep0: No irq?!
>ep0: ep_alloc() failed! (6)
>panic: resource_list_release: resource entry is n
Hey there. I'm trying to do a fresh install of 5.3, but can't get past
this error:
ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq10 on isa0
ep0: No irq?!
ep0: ep_alloc() failed! (6)
panic: resource_list_release: resource entry is not busy
Uptime: 1s
Automatic reboot in 15
I receive the following error just before root is mounted.
RTC BIOS diagnostic error 18
It looks to me like the kernel does not like the info the BIOS is
telling it about my hard drive.
I'm not experiencing any disk problems, so is this something I should
try to fix?
I'm also dual booting to window
Greetings
I'm trying to install FreeBSD on a HP Cluster Server. But when I boot with the
CD's ( 4.4, 4.8 & 5.0 ), it will boot all the way upto "Wait 15 seconds for
SCSI devices to settle" and then it immedialty give the following message:
(noperiph:sym0:0:-1:-1):SCSI BUS reset delivered.
(nope
still gives me that error.
-Original Message-
From: Thomas T. Veldhouse [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 12, 2003 7:49 AM
To: Carter, Mr. James A.
Subject: Re: "Boot Error" from BIOS after try to install 5.1-RELEASE
Boot to a prompt using your Windows ME disk (b
Greetings List:
After trying to install 5.1-RELEASE from CD (which fails miserably during
the BTX stage), my hard drive stopped booting. When the BIOS reaches my
hard-drive while scanning for bootable devices, it displays the message
"Boot Error".
I then inserted a Windows ME CD an
On Fri, 30 May 2003, JOHN HOOVER wrote:
> The machine is running just fine (best I can tell).
> It's a Samba server with internal email, no one's complained about
> it not working from the client side.
>
> It did take three or four attempts to get it to boot successfully
> after the power outage.
The machine is running just fine (best I can tell).
It's a Samba server with internal email, no one's complained about
it not working from the client side.
It did take three or four attempts to get it to boot successfully
after the power outage. But now it boots without any fuss except for
the st
On Fri, 30 May 2003, JOHN HOOVER wrote:
> We had power outage and machine went down, now during boot and after
> mounting the root partition the character string '^[[0' appears alot.
> The machine still runs and seems ok, but since I can't seem to get a
> search engine to take the string anyone
On Fri, 30 May 2003, JOHN HOOVER wrote:
> guys,
>
> I can't figure out how to get the mailing list search engine to take
> this so I'm asking it here.
>
> We had power outage and machine went down, now during boot and after
> mounting the root partition the character string '^[[0' appears alot.
>
guys,
I can't figure out how to get the mailing list search engine to take
this so I'm asking it here.
We had power outage and machine went down, now during boot and after
mounting the root partition the character string '^[[0' appears alot.
The machine still runs and seems ok, but since I can't
When booting the boot sequence ends with:
-
mounting root from ufs: /dev/ad0s1a
setrootbyname failed
ffs_mount root: can't find rootvp
Root mount failed: 6
mountroot>
--
When I enter 'ufs:ad0a' after the prompt I get a login prompt.
When I log in as root I receive a '%' prom
35 matches
Mail list logo
