On Wednesday, April 2, 2003, at 03:06 PM, Sukhbinder Singh wrote:
Hello,
Can anyone explain, how can I install more distribution into a
running freebsd from the root directory. for example if my initial
freebsd installation was only customed to install the bin (required)
distribution
On Thu, Apr 03, 2003 at 03:08:52PM +1000, Christopher Smith wrote:
I have two firewalls - the second is being prepped to replace the
first. All networking from the second machine appears to be fine
*except* traceroute looks broken. This happens:
could it be that your second maschine blocks
I got the bin distribution installed at the first time when I installed this
whole new FreeBSD into my computer for the very first time using the 2 image
floppy disk. First, I tried installing them using ftp. However, I was unable
to connect or start a ftp connection after successive tries. Then,
Hello,
I installed the /bin distribution from my harddisk at the very first
time when I installed freebsd. I chose the installed via dos partition
method and the installation program automatically found the /bin directory
in my dos partition and installed this bin distribution. Now my
Hi
Is there support for ATI Rage pro II on FreeBSD XFree86 server? According
to /stand/sysinstall there isn't or am I just blind?:)
Thanks
Wayne
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hi,
Does anyone have any ideas on this?
Anthony
On Thursday 03 April 2003 08:16, CARTER Anthony wrote:
Hi,
I had a bit of a problem with the new openoffice 1.0.2. It stops out with
the following:
=== Installing for openoffice-1.0.2_2
=== openoffice-1.0.2_2 depends on file:
Hi there everyone
A while ago I emailed this list regarding my network interfaces stop
responding when I am running x windows.
I have now installed the latest nvidia drivers on FreeBSD 4.8-RC and I
have found that it is indeed those drivers that causes that.
I have two dc type cards in my box,
On Wed, 2 Apr 2003, Eric Ekong wrote:
I added memory to my machine yesterday and since then I have noticed
Fatal traps when I try to do some intensive activity on the machine.
IE. make buildworld
Tried yanking that last module back out?
Something else, are all DIMMs the same manufacturer,
Mr. Chen's solution is a good one, and you might simplify it like this:
# Where a, b and c are the config files:
md5before=`cat a b c | md5`
vi a b c
md5after=`cat a b c | md5`
if [ $md5before = $md5after ]
then
exit # no changes made
fi
Curt Grimley
-Original Message-
On Thursday 03 April 2003 01:23 am, W. Sierke wrote:
From: Rus Foster [EMAIL PROTECTED]
Hi All,
Does FreeBSD have any support for loopback filesystems. i.e. I mean
being able to mount a file as a filesystem ala Linux. Googling didn't
chuck back much and the nearest I found was
Hi,
On Tue, Apr 01, 2003 at 04:00:56PM -0600, Kirk Strauser wrote:
At 2003-04-01T06:17:40Z, Kirk Strauser [EMAIL PROTECTED] writes:
It's now well past my bed time, my brain is all muzzy, and I'm this
close to giving up on the whole project. Before I do, I have to ask: has
*anyone* made
Can you post the rules he is using?
Perhaps you'll need something like:
passout quick on xl0 proto tcp from any to any keep state keep
frags
in his ruleset!
Regards,
Ivailo Tanusheff
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nevins,
is it possible to rebuild the MBR? i'm booting from a promise controller.
initially i was booting from the primary controller but now i'm booting
from the second ide contoller now.
Don't really know if this is completely relevant, but:
# man boot0cfg(8)
Steve
i'm assuming there is a
At 2003-04-03T14:51:05Z, [EMAIL PROTECTED] (Alexander Farber) writes:
I use fetchmail - procmail - SpamAssasin - Courier-IMAP on OpenBSD and
it works fine - procmail is able to deliver to Courier-IMAP folders, you
just have to name them .blah/
Cyrus is a little different. It maintains its
Hi all,
What is the command to record sound in freebsd? I have
the soundcard correctly set up and it playbacks sound
nicely, now i want to try recording, but don't know
how.
__
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms,
On Tue, 1 Apr 2003, Nevins, Peter wrote:
Hello. I'm a firewall admin and have run into a question regarding your OS.
A client is running IPFILTER and cannot send mail to us here. We're running
a Raptor Firewall for NT (yes, NT). He sends a SYN and my system responds
with an ACK that is more
* Andrew MacIntyre [EMAIL PROTECTED] [030403 07:33]:
On Wed, 2 Apr 2003, Eric Ekong wrote:
I added memory to my machine yesterday and since then I have noticed
Fatal traps when I try to do some intensive activity on the machine.
IE. make buildworld
Tried yanking that last module back
On Thu, 2003-04-03 at 00:52, Rus Foster wrote:
Hi All,
Does FreeBSD have any support for loopback filesystems. i.e. I mean being
able to mount a file as a filesystem ala Linux. Googling didn't chuck back
much and the nearest I found was mount_null. Is it possible?
***
-$ man mount_null
On Thu, 2003-04-03 at 08:57, Jeff Walters wrote:
See also:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/disks-virtual.html
vnconfig goes away in favor of mdconfig in FreeBSD 5.0.
Ah, I guess there is another solution other than mount_null .. My
mistake ..
--
Adam [EMAIL
Hey Leute,
Ich bin dabei seit anfang der Woche Freebsd auf meinem Laptop zu
installieren *g*...
Also ich hab XFree86 noch nicht zum laufen bekommen, und da mir dmesg
gesagt hat das er keinen treiber fuer meine graka und soundka nicht hat,
hab ich mal im handbuch geguckt was da zur soundkarte
Can someone tell me if the latest version of FreeBSD supports the
Adaptec 2100S raid card? I called Adaptec and they said only version
4.0 supports it and they did not know if the newer version did?
Also is there any other raid cards which would be better that you could
recommend?
Thanks!
I have a Compaq Presario 1220 laptop (Cyrix 200Mhz - woot!), and I can't
seem to get the touchpad to work.
I've read the laptop/mobile computing info, searched the mailing list,
and gone to a couple of linux laptop sites - and from what I gather,
there is really nothing special about a touchpad
Hello,
I am trying to find the best way to search through several thousand files and
move some to a different directory. The files are all prefixed with LB.
Like, LBX99.DAT141683.
These are data transactions and contain one line. The lines i am trying to
search for all begin with
1~TA~
-BEGIN PGP SIGNED MESSAGE-
~
On 03-Apr-2003, Matthew Bettinger wrote message #!sh grep and move files
~
Hello,
I am trying to find the best way to search through
On Thu, Apr 03, 2003 at 07:14:24AM +1000, Carl Morley wrote:
From: Carl Morley [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Thu, 3 Apr 2003 07:14:24 +1000
Subject: How to ignore arp error message
Hi,
I have a server on a network which is inhabited by an Intel rack-mount
box running Win2k. The
I've done a boot -v - psm0 says:
psm0: current command byte:0047
psm0: failed to reset the aux device
I'm using a Synaptics PS/2 TouchPad
Is there a patch to make this work? Is it possible to manually reset the
aux device?
I have a Compaq Presario 1220 laptop (Cyrix 200Mhz - woot!), and I
I've got VNC running with blackbox. Is there any useful info in the
vncserer logfile - probably located at ~/.vnc/something.log.
Basically, I set up a special user under which to launch the VNC server,
so that I can effectively restrict any VNC usage to that which I have
explicitly setup for the
In [EMAIL PROTECTED], Matthew Bettinger [EMAIL PROTECTED] typed:
I am trying to find the best way to search through several thousand files and
move some to a different directory. The files are all prefixed with LB.
Like, LBX99.DAT141683.
1~TA~ (standing for timeand attendance labor
On Thu, Apr 03, 2003 at 11:36:49AM -0500, Members Help wrote:
Can someone tell me if the latest version of FreeBSD supports the
Adaptec 2100S raid card? I called Adaptec and they said only version
4.0 supports it and they did not know if the newer version did?
Sure that card is supported
Greetings,
what are the major differences between rdist and rsync? is one of them better to
use?
I have a directory that i am backing up with a crontab and the backup dir is on
the same machine.
thanks,
brian
___
[EMAIL PROTECTED] mailing list
Greetings,
what are the major differences between rdist and rsync? is one of them better
to use?
I have a directory that i am backing up with a crontab and the backup dir is on
the same machine.
thanks,
brian
___
[EMAIL PROTECTED] mailing list
Although I've had success with FBSD as a server, I'm a complete newbie when
it comes to using FBSD as a desktop. I've completed a fresh install of FBSD
5.0-RELEASE, and the latest versions of Gnome2, and XWindows. I learned
that I needed 'options pcm' in my kernel config to get sound working so
CARTER Anthony wrote:
Hi,
Does anyone have any ideas on this?
Anthony
On Thursday 03 April 2003 08:16, CARTER Anthony wrote:
Hi,
I had a bit of a problem with the new openoffice 1.0.2. It stops out with
the following:
=== Installing for openoffice-1.0.2_2
=== openoffice-1.0.2_2 depends
Try removing the from after blackbox. I run KDE and this
is what my xstartup looks like:
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
xterm -geometry 80x24+10+10 -ls -title $VNCDESKTOP Desktop
autocutsel
xhost +
startkde
- Chris
-Original Message-
From: E. J. Cerejo
Can anyone recommend a PCI NIC for 802.11b that will work with FreeBSD 5.0-RELEASE and
a Shuttle sb51g?
I'm a relative newbie to FreeBSD and unix sysadmin stuff in general, so if there are
caveats and pay attention to thises I should be aware of, I'd be grateful for the
help.
Hello guys!
I'm trying to make kmail work with imapd in FreeBSD-5.0RELEASESp7
1. I compiled imap-uw
cd /usr/ports/mail/imap-uw
make WITH_SSL_AND_PLAINTEXT=yes install clean
2. I included the following lines in my inetd.conf file:
pop3stream tcp nowait root
-BEGIN PGP SIGNED MESSAGE-
~
On 03-Apr-2003, Brian Henning wrote message rdist vs rsync
~
Greetings,
what are the major differences between rdist and rsync? is one
That did it. I knew it was something in this file.
thanks
Chris Ptacek wrote:
Try removing the from after blackbox. I run KDE and this
is what my xstartup looks like:
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
xterm -geometry 80x24+10+10 -ls -title $VNCDESKTOP Desktop
autocutsel
On Thu, 03 Apr 2003 15:29:09 -0500 (EST), Andy Harrison wrote:
(cut)
rdist can be run through ssh, which is useful. (i have no clue if rsync can or
can't)
Yes, it can run trought ssh too.
___
[EMAIL PROTECTED] mailing list
Does anybody have a nice definition of the UNIX term load ?
I have a gut-level idea of what it is, but nothing that I can pass on to non-UNIX
people.
Any help?
--
David Olbersen
iGuard Engineer
11415 West Bernardo Court
San Diego, CA 92127
1-858-676-2277 x2152
At 3:49 PM -0700 4/1/03, Danilo Fiorenzano wrote:
5.0-CURRENT with sources cvsup'd on March 30.
portinstall vmware2 aborts with:
.../vmmon-only/freebsd/hostif.c: In function `FindMPN':
.../vmmon-only/freebsd/hostif.c:186: invalid operands to binary
*** Error code 1
Stop in
On Thursday, April 3, 2003, at 06:47 PM, Toni Schmidbauer wrote:
On Thu, Apr 03, 2003 at 03:08:52PM +1000, Christopher Smith wrote:
I have two firewalls - the second is being prepped to replace the
first. All networking from the second machine appears to be fine
*except* traceroute looks
Anyone running the FireBird db on FreeBSD? any pitfalls? how is performance,
stability?
thanks!
--
george donnelly - http://www.zettai.net/ - We Love Newbies :)
Zope Hosting - Dynamic Website Design - Search Engine Promotion
Yahoo, AIM: zettainet - MSN: [EMAIL PROTECTED] - ICQ: 51907738
Hi.
I've got printing set up and I have been able to generate the test print
from 5.0-CURRENT to my Laserjet 2200dse via USB cabling.
My wife wants to get her Lexmark 3200 off of her desk and somewhere
else. So, I migrated my Laserjet to USB and I'm planning to plug her
printer into the
I posted the following a month ago and got no responses.
Let's try this one more time, before I give up...
TIA and Cheers...
---BeginMessage---
I have cvsup-mirror installed (using the desfault paths) and I recently
installed svsweb.
I was looking at the cvsweb conf file and I started wondering
I've been running into a different problem than that one:
-bash-2.05b# make install
=== Installing for openoffice-1.0.2_2
Initializing installation program..
*** Error code 1 (ignored)
=== Generating temporary packing list
=== Add wrapper scripts
sed: illegal option -- i
usage: sed
On Thu, Apr 03, 2003 at 06:55:42PM -0500, Tom Parquette wrote:
Hi.
I've got printing set up and I have been able to generate the test print
from 5.0-CURRENT to my Laserjet 2200dse via USB cabling.
My wife wants to get her Lexmark 3200 off of her desk and somewhere
else. So, I migrated my
* Konrad Scorciapino ([EMAIL PROTECTED]) wrote:
== Hi,
==
== Whichever one you want. They should all work. you probably don't need
== the x11 port, so one of the two -nox11 versions. One is licensed with
== GNU, one with an open source license that permits commercial reuse if
== you pay a
I have to believe I'm overlooking something simple here, but I'm pulling my
hair out over this...
I am running 4.5.
I have the latest ports list.
I have installed apache 1.3.27, mod_ssl, mod_php 4.3.1 and mod_perl 1.27.
Previously, it was running the same, minus mod_perl.
Php is fine. I can
On Thu, 3 Apr 2003, David Olbersen wrote:
Does anybody have a nice definition of the UNIX term load ?
I have a gut-level idea of what it is, but nothing that I can pass on to non-UNIX
people.
Any help?
The load averages displayed in commands like top, uptime and w are the
average
Hi!!!
I have a ProLiant Dual XEON at 2.4Mhz running FreeBSD
5.0 configured as it follows:
machine i386
cpu I686_CPU
options SMP
options APIC_IO
But every time the system boots stop running at kernel
message: APIC_IO: Testing 8254 Interrupt
Delivery and go
Hi,
I'm using 4.7 Release.
When the kernel boots, I get a relatively long wait (a minute or more)
at the harddisk detection. The HD is a IBM-DTLA/30.7Gb; CPU is Intel
1.7 GHz.
For the whole 'dmesg' output, see below in the PS; the place where the
wait occurs is here:
[...]
atapci0: Intel
On Thu, 2003-04-03 at 16:10, Garance A Drosihn wrote:
.../vmmon-only/freebsd/hostif.c: In function `FindMPN':
.../vmmon-only/freebsd/hostif.c:186: invalid operands to binary
*** Error code 1
Stop in /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only.
Just wondering if the
Hi,
I just tried to use the time command to time a process, but with the -h
(human readable) output option:
Eg. time -h ping -c 5 some_ip_address
But I get back:
-h: Command not found.
0.000u 0.000s 0:00.00 0.0% 0+0k 0+0io 0pf+0w
What am I doing wrong?
Cheers,
Carl.
In the immortal words of Carl Morley [EMAIL PROTECTED]...
I just tried to use the time command to time a process, but with the
-h(human readable) output option:
Eg. time -h ping -c 5 some_ip_address
But I get back:
-h: Command not found.
0.000u 0.000s 0:00.00 0.0% 0+0k 0+0io 0pf+0w
On 2003-04-04 12:35, Carl Morley [EMAIL PROTECTED] wrote:
I just tried to use the time command to time a process, but with the
-h (human readable) output option:
Eg. time -h ping -c 5 some_ip_address
But I get back:
-h: Command not found.
0.000u 0.000s 0:00.00 0.0% 0+0k 0+0io 0pf+0w
# -Original Message-
# From: [EMAIL PROTECTED] [mailto:owner-freebsd-
# [EMAIL PROTECTED] On Behalf Of Giorgos Keramidas
# Sent: Friday, 4 April 2003 12:49
# To: Carl Morley
# Cc: [EMAIL PROTECTED]
# Subject: Re: time -h option not working?
#
# On 2003-04-04 12:35, Carl Morley [EMAIL
It appears I've been bitten by a bug in the vlan code. I noticed while
tcpdumping that the icmp time-exceeded packets were getting back to the
vlan parent interface, but not to the vlan interface itself. This
thread appears to describe the underlying problem:
Is it possible to setup an X session at the console then later access
that same session by remote without having to use saved sessions?
Basically I need to leave an X app running on my console, and later
access the session (or at least the application) from another system,
usually over my LAN, but
On Mon, 31 Mar 2003, D. Theunissen wrote:
Does anyone know how to start /usr/local/bin/vncserver at boottime as a particular
user?
eg. I want to start the vncserver as user 'dan' during boot.
I've found that if you put
@reboot $HOME/bin/startvnc
in dan's crontab works really well.
On Fri, 4 Apr 2003, Carl Morley wrote:
Hi,
I just tried to use the time command to time a process, but with the -h
(human readable) output option:
Eg. time -h ping -c 5 some_ip_address
But I get back:
-h: Command not found.
0.000u 0.000s 0:00.00 0.0% 0+0k 0+0io 0pf+0w
What am I
On Fri, 4 Apr 2003 10:17 am, Louis LeBlanc wrote:
I've been running into a different problem than that one:
=== Add wrapper scripts
sed: illegal option -- i
usage: sed script [-Ean] [file ...]
sed [-an] [-e script] ... [-f script_file] ... [file ...]
*** Error code 1
[EMAIL
Quoting Giorgos Keramidas [EMAIL PROTECTED]:
but you should really read the README file for hints and pointers
to more detailed documentation.
I think the README to which you refer is elsewhere? /etc/mail/README is quite
brief and refers to people who have sendmail_enable=NO and
Dear,
I have Freebsd 4.7-Release-p7 and I tried to install the port
Sysutils/diskcheckd(ports are daily cvsuped)
The message that I received is:
** 'sysutils/diskcheckd' is marked as IGNORE:
Not tested on anything less than 5.0, use at discretion
But the fact is that in an old
(/usr/ports) - ([EMAIL PROTECTED]) - (01:31:37)
-$ pkg_info |wc -l
488
As you can see, I need to clean up my system quite a bit. I've got a ton
of things installed, most of which were installed as dependencies for
ports that have since been uninstalled.
So, what I'd like to do is list all
On Fri, Apr 04, 2003 at 09:35:01AM +0300, Bigbrother wrote:
My question is why it says that it isn't tested on anything less than
5.0, even though I had compiled and used it on 4.X fbsds in the past?
It says it wasn't tested because it wasn't tested :-)
P.s. I tried to fiddle with the
You tried installing sed? It fixed that one for me...
Anthony
On Friday 04 April 2003 02:17, Louis LeBlanc wrote:
This message uses a character set that is not supported by the Internet
Service. To view the original message content, open the attached
message. If the text doesn't display
Hi all,
I'm about to implement a jail on FreeBSD 5, but I don't see anything in
the man page about devfs.
The host environment is running FreeBSD 5.0-RELEASE-p7, with devfs. The
jail man page says
cd $D/dev
sh MAKEDEV jail
Should I still do this step on 5? If not, what should I do ?
thanks,
Hi all!
I want to know how I can control the lpt1 port in asm or C.
I'm a newbie.
Any help would be greatly appreciated.
Greetings
Sebastian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
On Friday 04 April 2003 09:31, [EMAIL PROTECTED] wrote:
Hi all!
I want to know how I can control the lpt1 port in asm or C.
I'm a newbie.
Any help would be greatly appreciated.
There are two ways to do that.
1. Directly poke around with the ports
2. open /dev/lpt0 and communicate with that
I
In [EMAIL PROTECTED], Konrad Scorciapino [EMAIL PROTECTED] typed:
Install enscript so you can generate postscript files. Then read the
ijs documentation to figure out what flags to feed it to make produce
output for your printer. You can test this by doing something like:
Where can I find
On Thu, Apr 03, 2003 at 05:25:50PM +0800, Sukhbinder Singh wrote:
I got the bin distribution installed at the first time when I installed this
whole new FreeBSD into my computer for the very first time using the 2 image
floppy disk. First, I tried installing them using ftp. However, I was
On Thu, 3 Apr 2003, Heinrich Rebehn wrote:
Hi,
I am repeating the post below, because it obviously hasn't made it to
the list (at least i did not get it back from the list).
Can someone please give me some advice, because i will be setting up the
discs today.
Thank you
Hi,
I am
I appreciate the help so far in trying to get these X terminals going.
Unfortunately, I have discovered another oddity, this time with sshd and
dhclient. I'm not sure if they are related or not.
The first is with sshd. Randomly, and for no apparent reason, sshd will
refuse to allow logins.
what I would like to do is have windows boxes print to a unix
printer filter which would convert the file into pdf format
and put the file into a directory where it could be emailed
out.
Anyone tried this? First off, I tried modifying the printcap if=
entry to take the file and save it as a
At 3:33 PM -0500 4/3/03, David Banning wrote:
what I would like to do is have windows boxes print to a unix
printer filter which would convert the file into pdf format
and put the file into a directory where it could be emailed
out.
Anyone tried this? First off, I tried modifying the printcap
I am running FreeBSD4.7-stable on my laptop and am using XFree863.3.6
because XFree864 is not compatible with my hardware. I have tried to
install TrueType fonts as described in the handbook online, but keep
getting an error which reads:
unable to set default font, 'fixed'
However, if I
Dancho Penev [EMAIL PROTECTED] wrote:
On Thu, Apr 03, 2003 at 07:14:24AM +1000, Carl Morley wrote:
From: Carl Morley [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Thu, 3 Apr 2003 07:14:24 +1000
Subject: How to ignore arp error message
arp: 10.1.21.80 moved from 00:03:47:f1:b8:3b to
Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Murphy
Sent: Friday, 4 April 2003 09:52
To: Dancho Penev
Cc: [EMAIL PROTECTED]
Subject: Re: How to ignore arp error message
Dancho Penev [EMAIL PROTECTED] wrote:
On Thu, Apr 03, 2003 at 07:14:24AM
On Thu, Apr 03, 2003 at 04:14:19PM -0700, Fred Ciesla wrote:
I am running FreeBSD4.7-stable on my laptop and am using XFree863.3.6
because XFree864 is not compatible with my hardware. I have tried to
install TrueType fonts as described in the handbook online, but keep
getting an error which
Jan Grant wrote:
On Thu, 3 Apr 2003, Heinrich Rebehn wrote:
Hi,
I am repeating the post below, because it obviously hasn't made it to
the list (at least i did not get it back from the list).
Can someone please give me some advice, because i will be setting up the
discs today.
Thank you
Hi,
On Thu, 3 Apr 2003, Heinrich Rebehn wrote:
Thank you for your reply. I have reread the manpage and would go for:
- blocksize = 64 kB
- fragsize= 64/8 = 8 kB
- bytes/inode = 16 kB
Are these values reasonable or should i use higher values (because the
disk is so large?)
I'd turn
Jan Grant wrote:
On Thu, 3 Apr 2003, Heinrich Rebehn wrote:
Thank you for your reply. I have reread the manpage and would go for:
- blocksize = 64 kB
- fragsize= 64/8 = 8 kB
- bytes/inode = 16 kB
Are these values reasonable or should i use higher values (because the
disk is so
On Thu, 3 Apr 2003, Heinrich Rebehn wrote:
Jan Grant wrote:
On Thu, 3 Apr 2003, Heinrich Rebehn wrote:
Thank you for your reply. I have reread the manpage and would go for:
- blocksize = 64 kB
- fragsize= 64/8 = 8 kB
- bytes/inode = 16 kB
Are these values reasonable or
Hi,
I've got a STABLE (as of today) running where I connect my Keyspan USA-19
serial adapter. I've compiled my kernel with device ucom, but when my
computer boots up, it displays:
ugen0: Keyspan USA-19 serial adapter, rev 1.00/80.01, addr 2
Why does this come up as ugen and not ucom? As far as I
Hi People,
I've done all the necessary steps to configure my modem ( FreeBSD 4.7
Stable ) and I can communicate fine directly to my Courier modem using
tip ( I enabled Courier support and recompiled tip from source ) . I now
need some help tweaking the serial port and whatever else may have to be
When I ran XF 3.3.6 I had truetype fonts working but I only remember
this much on how to configure it.
cd /usr/ports/x11-servers
out of these servers choose the one that relates to your video card, the
driver you chose when you first configured XFree86, you can also find it
in
In the last episode (Apr 03), Joey Teel said:
Is it possible to setup an X session at the console then later access
that same session by remote without having to use saved sessions?
Basically I need to leave an X app running on my console, and later
access the session (or at least the
Ok, I think I just qualified for an idiot award. After a little more
poking around, I discovered that it was the read-only filesystem that was
causing the problem. I rebuilt the microdrive image, and included a
special /dev this time - which I mount over the original /dev. Now, I
don't seem to be
On Thu, 3 Apr 2003, David Banning wrote:
what I would like to do is have windows boxes print to a unix
printer filter which would convert the file into pdf format
and put the file into a directory where it could be emailed
out.
Anyone tried this? First off, I tried modifying the printcap
On Fri, Apr 04, 2003 at 02:14:09PM +1000, JacobRhoden wrote:
On Fri, 4 Apr 2003 10:17 am, Louis LeBlanc wrote:
I've been running into a different problem than that one:
=== Add wrapper scripts
sed: illegal option -- i
usage: sed script [-Ean] [file ...]
sed [-an] [-e script]
Good Day/Morning ;)
My name is Ivar Tenter. I am administator of 3 Latvian ISP Companies, called
Junik, Neonet and soon Telia/Sonera too. I have own 100Mbit line and own WSP
called Sunshine.lv. I want to be Latvian Freebsd support team Master and
webhoster of lv.freebsd.org or lv2.freebsd.org -
92 matches
Mail list logo