bwi: base tssi measure failed
bwi: need multicast callback update
Ok, the second error repeats, but it looks like a ToDo item for the
programmer.
I'm running FreeBSD 8, and bwi is new in 8.
___
freebsd-questions@freebsd.org mailing list
On Tue, Dec 22, 2009 at 12:31:13AM +0100, Erik Trulsson wrote:
On Mon, Dec 21, 2009 at 01:14:22PM -0800, Jeff Hamann wrote:
I've been trying to figure out where gfortran went since it doesn't appear
in the /usr/ports collection in FreeBSD 7.2 (i386).
I need it to build plots of
well, one of my colleagues pointed out a feature of fortran 2003,
which I, being an idiot, have missed. YOu have access='stream'
in f2003, which is all I need. No record separators, just data.
many thanks for all your help and advice.
anton
--
Anton Shterenlikht
Room 2.6, Queen's Building
Hello,
I'm seeing exactly the same issues on my 5 disk raidz pool again.
In brief:
I can only write to the filesystem at ~20MB/s, and read from it at
~25MB/s. Normally, I'd expect to be able to write at nearer 50-100
MB/s, and read at ~200MB/s.
The values from zpool iostat -v are also strange.
2) fonts: There are a couple of cool commands,
fc-list and xfontsel to list the
installed fonts. I
used these to set fonts after testing options by
starting some
variations with
xterm -fa
'Liberation Mono' -fs 10
xterm -fa
Bitstream Vera
On 22/12/2009 00:46, Mel Flynn wrote:
On Monday 21 December 2009 09:56:11 Nikos Vassiliadis wrote:
On 12/21/2009 6:03 AM, Mel Flynn wrote:
Hi,
I've looked over http://www.openbsd.org/faq/pf/pools.html but this
assumes two different gateways for the two interfaces.
I'm faced with two
On Sun, Dec 20, 2009 at 11:20:12PM +0100, Marius Strobl wrote:
On Sun, Dec 20, 2009 at 10:10:10PM +, Anton Shterenlikht wrote:
On Sun, Dec 20, 2009 at 04:00:05PM +0100, Marius Strobl wrote:
On Sat, Dec 19, 2009 at 09:48:03PM +, Anton Shterenlikht wrote:
I've built X without
Im trying to add a basic rule in my ipfw.
My server has 2 network address, one for external access (x.x.x.x) and other
for the local network(y.y.y.y).
The mysql is binded to the local network, but I would like to allow my home
computer (z.z.z.z) to connect to the mysql by the external ip.
so
Am Freitag, den 18.12.2009, 04:41 +0100 schrieb Peter Ulrich Kruppa:
Am Dienstag, den 15.12.2009, 07:28 -0500 schrieb Lowell Gilbert:
Peter Ulrich Kruppa ulr...@pukruppa.net writes:
since my update to cups-1.4.2 I can't print anymore :-(
I have got a HP Deskjet 990 Cxi attached to
On 12/22/09, Steven Friedrich free...@insightbb.com wrote:
What does privacy mean and why isn't it explained in any man page?
Here's my ifconfig:
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 00:14:a5:2a:a5:db
inet 192.168.2.254 netmask
On Mon, Dec 21, 2009 at 03:00:27PM -0800, Matthew Fleming wrote:
We have a bunch of libraries to support our product and as far as I know
we only link to the shared library version. I'd like to skip the build
of the static version of our libraries to speed up our builds and save
on disk
You can find here too http://shop.mensys.nl/uk/catalogue/mns_FreeBSDDaemon.html
--- En date de : Lun 21.12.09, Bruce Cran br...@cran.org.uk a écrit :
De: Bruce Cran br...@cran.org.uk
Objet: Re: FreeBSD beastie plush toy?
À: Aleksandr Miroslav alexmiros...@gmail.com
Cc:
It's quite confusing trying to figure out
which card is which. ath(4) only gives
chipsets as AR5210, AR5211, AR5212 and AR5416.
But the manufacturers rarely say which chipsets
their cards are using. After some search I can
see that Netgear WG311T is ar5212, so should be
supported. But, just to
I developed a small molecular dynamics simulation under Linux some time ago.
Since recently moving to FreeBSD I thought that I'd try to get it running
here, too.
However, although I am able to get the code to build, it dumps core --
apparently before getting to any user code! During the build
I have found a solution to my problem.
I have created a directory mpdscribble in /var/run
Then, I changed rights of /var/run/mpdscribble to 777 and I rebooted the system.
At startup, there were no error message. In /var/run/mpdscribble the pid file
was present and was owned by nobody user.
Then I
On Tue, Dec 22, 2009 at 02:23:26PM +, Anton Shterenlikht wrote:
It's quite confusing trying to figure out
which card is which. ath(4) only gives
chipsets as AR5210, AR5211, AR5212 and AR5416.
But the manufacturers rarely say which chipsets
their cards are using.
If you are looking at a
On Tue, Dec 22, 2009 at 05:36:19PM +0200, Richard Mace wrote:
I developed a small molecular dynamics simulation under Linux some time ago.
Since recently moving to FreeBSD I thought that I'd try to get it running
here, too.
However, although I am able to get the code to build, it dumps
And I can get the basic screens up but have no working keyboard or mouse.
To each of you, thank you very much for your assistance.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
Здравствуйте, Tiago.
Вы писали 22 декабря 2009 г., 14:59:50:
T Im trying to add a basic rule in my ipfw.
T My server has 2 network address, one for external access (x.x.x.x) and other
T for the local network(y.y.y.y).
T The mysql is binded to the local network, but I would like to allow my home
Hello,
Are you aware of any this driver available? Thanks.
Mike
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 22 Dec 2009, Коньков Евгений wrote:
|Здравствуйте, Tiago.
|
|Вы писали 22 декабря 2009 г., 14:59:50:
|
|T Im trying to add a basic rule in my ipfw.
|T My server has 2 network address, one for external access (x.x.x.x) and other
|T for the
On Tuesday 22 December 2009 18:28:07 you wrote:
On Tue, Dec 22, 2009 at 05:36:19PM +0200, Richard Mace wrote:
I developed a small molecular dynamics simulation under Linux some time
ago. Since recently moving to FreeBSD I thought that I'd try to get it
running here, too.
However,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 22 Dec 2009, Igor V. Ruzanov wrote:
|-BEGIN PGP SIGNED MESSAGE-
|Hash: SHA1
|
|On Tue, 22 Dec 2009, Коньков Евгений wrote:
|
||Здравствуйте, Tiago.
||
||Вы писали 22 декабря 2009 г., 14:59:50:
||
||T Im trying to add a basic rule in
On Tue, Dec 22, 2009 at 07:06:47PM +0200, Richard Mace wrote:
On Tuesday 22 December 2009 18:28:07 you wrote:
On Tue, Dec 22, 2009 at 05:36:19PM +0200, Richard Mace wrote:
I developed a small molecular dynamics simulation under Linux some time
ago. Since recently moving to FreeBSD I
On my desktop box I settled on an xterm font and font size by
experimenting thus:
xterm -fa 'Bitstream Vera Sans Mono' -fs 10
I went through a number of fonts until I settled on the one I liked
most. Then I created an .Xdefaults file in my home directory which
included:
Xterm*faceName
On Tuesday 22 December 2009 19:31:31 you wrote:
What version of the nvidia driver are you using?
The one in /usr/ports/x11/nvidia-driver-173. I have to use this for the aging
FX 5200.
Have a look at the x11-drivers/xf86-video-nouveau port. Maybe that works
for you?
(BTW, problems
You may wish to check and see if your firmware is up-to-date on all of your
disk drives, and your controller.
On Mon, Dec 21, 2009 at 10:40:10PM +0200, Alex thus spake:
Dear John,
Any progress for bellow?
I have the same problem with PCI SATA Controller ST-Lab A-173 Sil3512
It's not RAID, but
On Tue, Dec 22, 2009 at 11:52 AM, Jason jhelf...@e-e.com wrote:
=
Any progress for bellow?
I have the same problem with PCI SATA Controller ST-Lab A-173 Sil3512
It's not RAID, but when copying to HDD:
LOG---
ad6:FAILURE - device detached
On Tue, Dec 22, 2009 at 09:38:19AM -0800, Rem P Roberti wrote:
rendered correctly, but I can't get X to read the .Xdefaults file.
ideas on why .Xdefauts works on the desktop box but not the laptop?
Could it be that you need to make sure your xterm is executing a login
shell when it starts,
Hi,
Do you have any idea how to run fsck to a FAT32 fs, I tried fsck_msdosfs but it
seems that is not for FAT32, I always get the following:
root# fsck_msdosfs -y /dev/da0s1
** /dev/da0s1
backup doesn't compare to primary bootblock
Thank you!
László
On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
ok, I moved a step further. 'X -configure' is now successful.
All I had to do is to move the graphics card to another pci
slot. Perhaps where xvr600 was, is not a standard pci slot
at all? pgx64 worked fine there in the text mode, but not
in the
On Tue, Dec 22, 2009 at 07:50:19PM +0200, Richard Mace wrote:
On Tuesday 22 December 2009 19:31:31 you wrote:
What version of the nvidia driver are you using?
The one in /usr/ports/x11/nvidia-driver-173. I have to use this for the aging
FX 5200.
Have a look at the
On Tue, Dec 22, 2009 at 11:12:35AM -0700, Warren Block wrote:
On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
ok, I moved a step further. 'X -configure' is now successful.
All I had to do is to move the graphics card to another pci
slot. Perhaps where xvr600 was, is not a standard pci slot
On 2009.12.22 18:03:00 +, Jamie Griffin wrote:
On Tue, Dec 22, 2009 at 09:38:19AM -0800, Rem P Roberti wrote:
rendered correctly, but I can't get X to read the .Xdefaults file.
ideas on why .Xdefauts works on the desktop box but not the laptop?
Could it be that you need to make sure
On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
Warren, thank you, but this doesn't help. I've added:
Section Monitor
Identifier Monitor0
HorizSync 30-50
VertRefresh 60
EndSection
Section Device
Identifier Card0
Driver mach64
On Tue, Dec 22, 2009 at 09:38:19AM -0800, Rem P Roberti wrote:
On my desktop box I settled on an xterm font and font size by
experimenting thus:
xterm -fa 'Bitstream Vera Sans Mono' -fs 10
I went through a number of fonts until I settled on the one I liked
most. Then I created an
On Tuesday 22 December 2009 20:35:19 you wrote:
On Tue, Dec 22, 2009 at 07:50:19PM +0200, Richard Mace wrote:
On Tuesday 22 December 2009 19:31:31 you wrote:
What version of the nvidia driver are you using?
The one in /usr/ports/x11/nvidia-driver-173. I have to use this for the
aging
On Tue, Dec 22, 2009 at 12:26:03PM -0700, Warren Block wrote:
On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
Warren, thank you, but this doesn't help. I've added:
Section Monitor
Identifier Monitor0
HorizSync 30-50
VertRefresh 60
EndSection
Section Device
On Tue, Dec 22, 2009 at 12:26:03PM -0700, Warren Block wrote:
On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
Warren, thank you, but this doesn't help. I've added:
Section Monitor
Identifier Monitor0
HorizSync 30-50
VertRefresh 60
EndSection
Section Device
On Tue, Dec 22, 2009 at 08:12:14PM +, Anton Shterenlikht wrote:
On Tue, Dec 22, 2009 at 12:26:03PM -0700, Warren Block wrote:
On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
Warren, thank you, but this doesn't help. I've added:
Section Monitor
Identifier Monitor0
On Tue, Dec 22, 2009 at 09:29:54PM +0100, Marius Strobl wrote:
On Tue, Dec 22, 2009 at 08:12:14PM +, Anton Shterenlikht wrote:
On Tue, Dec 22, 2009 at 12:26:03PM -0700, Warren Block wrote:
On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
Warren, thank you, but this doesn't help. I've
On Tue, Dec 22, 2009 at 08:47:19PM +, Anton Shterenlikht wrote:
On Tue, Dec 22, 2009 at 09:29:54PM +0100, Marius Strobl wrote:
On Tue, Dec 22, 2009 at 08:12:14PM +, Anton Shterenlikht wrote:
On Tue, Dec 22, 2009 at 12:26:03PM -0700, Warren Block wrote:
On Tue, 22 Dec 2009, Anton
On Tue, Dec 22, 2009 at 09:57:57PM +0200, Richard Mace wrote:
In the end, as a last resort, I de-installed the nvidia driver and started X
with an empty /etc/X11/xorg.conf (which presumably loads the nv driver). I
re-built my code and it runs, albeit without the smoothest of graphics.
On a
On 2009.12.22 22:05:10 +, Yuri Pankov wrote:
On Tue, Dec 22, 2009 at 09:38:19AM -0800, Rem P Roberti wrote:
On my desktop box I settled on an xterm font and font size by
experimenting thus:
xterm -fa 'Bitstream Vera Sans Mono' -fs 10
I went through a number of fonts until I
I've tried to upgrade my Linux subsystem to f10 and ended up with a mess. Some
are upgraded and some aren't. Pango is currently refusing to upgrade. Here's
what I get:
[r...@bahamut /usr/ports]# portupgrade -o x11-toolkits/linux-f10-pango/
linux-pango
** Detected a package name change:
Hello.
This evening something new appeared on my box.
When I open an xterm or a KDE shell, I get:
You have 10 mail messages in /var/mail/.
This does not happen when I login on ttyvX.
Nothing mail related is on this box (apart from KMail and Thunderbird)
and ls -l /var/mail gives only zero
On Tue, Dec 22, 2009 at 02:48:15AM -0800, Mark Terribile wrote:
After finding what you like simply add the lines to ~/.Xdefaults:
XTerm*faceName: Liberation Mono
XTerm*faceSize: 10
Is there a way to change the contents of the xterm font menu without
On Tue, Dec 22, 2009 at 01:45:52PM -0800, Rem P Roberti wrote:
I think case matters here, i.e. XTerm*, not Xterm or xterm.
Exactly the problem. Thank you!
Curious, on my system (7.2) my ~/.Xdefaults uses lowercase 'xterm*...'
values.
At least you got it working which is the main thing.
On Tue, Dec 22, 2009 at 4:55 PM, Andrea Venturoli m...@netfence.it wrote:
Hello.
This evening something new appeared on my box.
When I open an xterm or a KDE shell, I get:
You have 10 mail messages in /var/mail/.
This does not happen when I login on ttyvX.
Nothing mail related is on this
APseudoUtopia ha scritto:
Type mail
You have 10 mail messages in /var/mail/.
%mail
No mail for andrea
%
I had already tried that, but AFAIK mail reads from /var/mail/andrea and
that file is not there (in spite of the above message).
FreeBSD has a daily cron security and status
It should be noted that my raid controller card driver (htprr) is
exhibiting the same issue. Before 8.0, both the ata and htprr drivers
would recognize a HD insertion and the disks information would be
scanned and device nodes created. On 8.0, the best I can see is that
the drive insertion
On Tuesday 22 December 2009 02:48:58 Craig Butler wrote:
On 22/12/2009 00:46, Mel Flynn wrote:
On Monday 21 December 2009 09:56:11 Nikos Vassiliadis wrote:
On 12/21/2009 6:03 AM, Mel Flynn wrote:
Hi,
I've looked over http://www.openbsd.org/faq/pf/pools.html but this
assumes two
Folks,
This is exacrtly a FreeBSD question [for a change]. I read on
another list that the Opera broswer has a builtin speech option
and am wondering in our port/pkg/version has this capability.
Anybody know off hand?
gary
--
Gary Kline
Yep
Gary Kline wrote:
Folks,
This is exacrtly a FreeBSD question [for a change]. I read on
another list that the Opera broswer has a builtin speech option
and am wondering in our port/pkg/version has this capability.
Anybody know off hand?
gary
On Tue, 22 Dec 2009 15:16:41 -0800
Gary Kline kl...@thought.org wrote:
Folks,
This is exacrtly a FreeBSD question [for a change]. I read on
another list that the Opera broswer has a builtin speech option
and am wondering in our port/pkg/version has this
My system: FreeBSD 8.0
I had a problem with update freebsd-doc-en
**
Error: /undefinedfilename in --file--
Operand stack:
On Wednesday 23 December 2009 00:50, Andrea Venturoli wrote:
I had already tried that, but AFAIK mail reads from /var/mail/andrea and
that file is not there (in spite of the above message).
In my box, there is the ~/mbox file that has the messages in it. you can check
out if it exists...
--
On Tue, 22 Dec 2009 23:50:54 +0100
Andrea Venturoli m...@netfence.it wrote:
APseudoUtopia ha scritto:
Type mail
You have 10 mail messages in /var/mail/.
%mail
No mail for andrea
Are there really two spaces in a row there? That's a vital clue. For
some reason your 'USER' environment
On Tuesday 22 December 2009 22:00:51 Roland Smith wrote:
On Tue, Dec 22, 2009 at 09:57:57PM +0200, Richard Mace wrote:
In the end, as a last resort, I de-installed the nvidia driver and
started X with an empty /etc/X11/xorg.conf (which presumably loads the
nv driver). I re-built my code and
On Tue, Dec 22, 2009 at 06:27:46PM -0500, Rod Person wrote:
On Tue, 22 Dec 2009 15:16:41 -0800
Gary Kline kl...@thought.org wrote:
Folks,
This is exacrtly a FreeBSD question [for a change]. I read on
another list that the Opera broswer has a builtin speech option
On Wednesday 23 December 2009 04:20:28 Pieter de Goeje wrote:
On Tuesday 22 December 2009 22:00:51 Roland Smith wrote:
On Tue, Dec 22, 2009 at 09:57:57PM +0200, Richard Mace wrote:
In the end, as a last resort, I de-installed the nvidia driver and
started X with an empty
On 23/12/2009 2:03 π.μ., ajtiM wrote:
My system: FreeBSD 8.0
I had a problem with update freebsd-doc-en
**
Error: /undefinedfilename in --file--
Operand stack:
On Tue, 22 Dec 2009 13:47:09 -0800 (PST) David LeCount wrote:
I've tried to upgrade my Linux subsystem to f10 and ended up with a mess.
Some are upgraded and some aren't. Pango is currently refusing to upgrade.
Here's what I get:
[r...@bahamut /usr/ports]# portupgrade -o
Ed Jobs ha scritto:
In my box, there is the ~/mbox file that has the messages in it. you can check
out if it exists...
Nope.
bye
av.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
64 matches
Mail list logo
