Kernel from RELENG_4 as of 13-OCT-2003 broken?
Hi list, i upgrade my sources every night from CVS using the RELENG_4 tag. The changes from 13-OCT seem to have broken something. When i booted the newly compiled kernel and tried to do a cd /usr/src; make -j4 buildworld the system froze after some 10 minutes and i had to press RESET. No errors were reported. This happended twice. Apart from that, the system seemed to run normal. I then booted the kernel as of 10-OCT and buildworld was ok. The changes were: P share/examples/cvsup/cvs-supfile P share/examples/cvsup/ports-supfile P share/examples/cvsup/refuse P share/examples/cvsup/refuse.README P sys/kern/uipc_mbuf.c P sys/netinet/ip_output.c P sys/sys/mbuf.h Are there any known issues with this? I am attaching dmesg output and will happily supply more info if required :-) Regards, Heinrich Rebehn -- Heinrich Rebehn University of Bremen Physics / Electrical and Electronics Engineering - Department of Telecommunications - Phone : +49/421/218-4664 Fax :-3341 3937 Feb 10 2003 a2ps-print.el Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... done m 555 rarpd Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-PRERELEASE #4: Thu Sep 11 13:49:53 CEST 2003 [EMAIL PROTECTED]:/export/huge/usr/obj/usr/src/sys/ANTSRV1 Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM) XP1800+ (1544.67-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff AMD Features=0xc040 real memory = 1073659904 (1048496K bytes) avail memory = 1041371136 (1016964K bytes) Preloaded elf kernel "kernel" at 0xc0371000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00f1770 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 atapci0: port 0xb400-0xb40f at device 4.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 isab0: at device 7.0 on pci0 isa0: on isab0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xe880-0xe880007f irq 15 at device 9.0 on pci0 xl0: Ethernet address: 00:50:04:3c:aa:1c miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xe800-0xe87f irq 10 at device 10.0 on pci0 xl1: Ethernet address: 00:04:76:28:70:0e miibus1: on xl1 xlphy1: <3c905C 10/100 internal PHY> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto twe0: <3ware Storage Controller> port 0x9800-0x980f mem 0xe700-0xe77f,0xe780-0xe78f irq 11 at device 12.0 on pci0 twe0: 8 ports, Firmware FE7X 1.05.01.034, BIOS BE7X 1.08.00.040 ahc0: port 0x9400-0x94ff mem 0xe680-0xe6800fff irq 9 at device 13.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs chip1: at device 17.0 on pci0 orm0: at iomem 0xc-0xcafff,0xcc000-0xcc7ff,0xd-0xd0fff,0xd4000-0xd47ff on isa0 pmtimer0 on isa0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 39266MB [79780/16/63] at ata0-master UDMA33 acd0: CDROM at ata0-slave PIO4 Waiting 15 seconds for SCSI devices to settle twed0: on twe0 twed0: 478742MB (980465408 sectors) twed1: on twe0 twed1: 293215MB (600505600 sectors) twe0: command interrupt sa0 at ahc0 bus 0 target 0 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) Mounting root from ufs:/dev/ad0s1a cd0 at ahc0 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $ /dev/vmmon: Module vmmon: initialized cd9660: RockRidge Extension cd9660: RockRidge Extension cd9660: RockRidge Extension cd9660: Joliet Extension (Level 1)
Kernel from RELENG_4 as of 13-OCT-2003 broken?
Hi list, i upgrade my sources every night from CVS using the RELENG_4 tag. The changes from 13-OCT seem to have broken something. When i booted the newly compiled kernel and tried to do a cd /usr/src; make -j4 buildworld the system froze after some 10 minutes and i had to press RESET. No errors were reported. This happended twice. Apart from that, the system seemed to run normal. I then booted the kernel as of 10-OCT and buildworld was ok. The changes were: P share/examples/cvsup/cvs-supfile P share/examples/cvsup/ports-supfile P share/examples/cvsup/refuse P share/examples/cvsup/refuse.README P sys/kern/uipc_mbuf.c P sys/netinet/ip_output.c P sys/sys/mbuf.h Are there any known issues with this? I am attaching dmesg output and will happily supply more info if required :-) Regards, Heinrich Rebehn -- Heinrich Rebehn University of Bremen Physics / Electrical and Electronics Engineering - Department of Telecommunications - Phone : +49/421/218-4664 Fax :-3341 3937 Feb 10 2003 a2ps-print.el Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... done m 555 rarpd Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-PRERELEASE #4: Thu Sep 11 13:49:53 CEST 2003 [EMAIL PROTECTED]:/export/huge/usr/obj/usr/src/sys/ANTSRV1 Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM) XP1800+ (1544.67-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff AMD Features=0xc040 real memory = 1073659904 (1048496K bytes) avail memory = 1041371136 (1016964K bytes) Preloaded elf kernel "kernel" at 0xc0371000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00f1770 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 atapci0: port 0xb400-0xb40f at device 4.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 isab0: at device 7.0 on pci0 isa0: on isab0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xe880-0xe880007f irq 15 at device 9.0 on pci0 xl0: Ethernet address: 00:50:04:3c:aa:1c miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xe800-0xe87f irq 10 at device 10.0 on pci0 xl1: Ethernet address: 00:04:76:28:70:0e miibus1: on xl1 xlphy1: <3c905C 10/100 internal PHY> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto twe0: <3ware Storage Controller> port 0x9800-0x980f mem 0xe700-0xe77f,0xe780-0xe78f irq 11 at device 12.0 on pci0 twe0: 8 ports, Firmware FE7X 1.05.01.034, BIOS BE7X 1.08.00.040 ahc0: port 0x9400-0x94ff mem 0xe680-0xe6800fff irq 9 at device 13.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs chip1: at device 17.0 on pci0 orm0: at iomem 0xc-0xcafff,0xcc000-0xcc7ff,0xd-0xd0fff,0xd4000-0xd47ff on isa0 pmtimer0 on isa0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 39266MB [79780/16/63] at ata0-master UDMA33 acd0: CDROM at ata0-slave PIO4 Waiting 15 seconds for SCSI devices to settle twed0: on twe0 twed0: 478742MB (980465408 sectors) twed1: on twe0 twed1: 293215MB (600505600 sectors) twe0: command interrupt sa0 at ahc0 bus 0 target 0 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) Mounting root from ufs:/dev/ad0s1a cd0 at ahc0 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $ /dev/vmmon: Module vmmon: initialized cd9660: RockRidge Extension cd9660: RockRidge Extension cd9660: RockRidge Extension cd9660: Joliet Extension (Level 1)