RE: ATI Radeon IGP 340M
Ian, I have the same graphics card, and XFree86 seemed to detect it automagically. I even have working GL drivers. Performance isn't the best, and the GL is a little choppy, but I'm not looking at gaming on this machine. Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian N Cole Sent: Monday, December 08, 2003 3:50 AM To: [EMAIL PROTECTED] Subject: ATI Radeon IGP 340M Juan...I need helpful info on how to install the xfree...I have no clue as how to do this... I have a laptop with the 340m and need drivers to improve its performance..what isthe xfree and how exactly does it work?? thank you...hope u can help Ian Cole dallas tx ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: I try to change atapi_dma to "1" but it doesn't work (It was "Re: ATI Radeon IGP 340M")
Use hw.ata.atapi.dma="x" for atapi devices(cdroms and dvdroms). Drop that atapi for hard drives. Here x = 0-6 at speeds of 16.7, 25, 33.3, 44.4, 66.7, 100, 133. Mode 6 only works on select drives, like mators, with a board that supports, like an nforce. Most cdroms should not be more than a mode 2. Thats for a 52x where 52x150kb/s=7800kb/s=7.6mb/s max transfer. My liteon supports 33.3mb/s tranfers, and I use that mode but it is no real avantage over mode 0 or 1. Dvds use 1250kb/s as their x value, so a 8x dvd would need 8x1250kb/s=1kb/s=9.8mb/s. So just cut and paste this in the loader.conf file. Juan Rodriguez Hervella wrote: On Monday 06 October 2003 19:49, Mike Silbersack wrote: On Mon, 6 Oct 2003, Juan Rodriguez Hervella wrote: Thank you very much. It's working. I've tried to play a DVD using "ogle", but it doesn't work very well, the movement isn't steadyI've got a friend with the same laptop using Linux and he tells me it works nice.so I guess it's a FreeBSD performance problem*sigh* Thank you anyway. -- JFRH FreeBSD doesn't enable DMA access to CD/DVD drives by default, that may be part of the problem; try enabling atapi_dma (see the ata manpage), that might help. Mike "Silby" Silbersack I've tried both atapi_dma="1" in "loader.conf" and "atacontrol mode 1 udma100 XXX" but when I attempt to access the device, it hangs up. I copy a "dmesg" if this can help. Look at the end there are some error messages related to ATA ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: I try to change atapi_dma to "1" but it doesn't work (It was "Re: ATI Radeon IGP 340M")
On Tuesday 07 October 2003 09:11, Mike Silbersack wrote: > On Tue, 7 Oct 2003, Juan Rodriguez Hervella wrote: > > I've tried both atapi_dma="1" in "loader.conf" and "atacontrol mode 1 > > udma100 XXX" but when I attempt to access the device, it hangs up. > > The same thing happens to me, unfortunately... > > Actually, that shouldn't be surprising; I compared dmesgs, and it looks > like we have the same IDE controller and DVD/CD-RW drive; is this a > Compaq/HP laptop? > > Soren (the ata driver guy) might be able to debug the problem, but I > haven't taken the time to bother him about it. > > Unless you can get him to look at it, you're stuck for now. :) > > Mike "Silby" Silbersack Yeah my laptop is HP (at least on the screen it shows HP) and on the keyboard it shows "compaq nx9010". I'm not sure if this is an HP or Compaq :D I think I will remain happily stuck. This doesn't seem to be an important issue as long as I can watch DVDs on windows*sigh*. Thank you Mike ! :) -- JFRH ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: I try to change atapi_dma to "1" but it doesn't work (It was "Re: ATI Radeon IGP 340M")
On Tue, 7 Oct 2003, Juan Rodriguez Hervella wrote: > I've tried both atapi_dma="1" in "loader.conf" and "atacontrol mode 1 udma100 > XXX" but when I attempt to access the device, it hangs up. The same thing happens to me, unfortunately... Actually, that shouldn't be surprising; I compared dmesgs, and it looks like we have the same IDE controller and DVD/CD-RW drive; is this a Compaq/HP laptop? Soren (the ata driver guy) might be able to debug the problem, but I haven't taken the time to bother him about it. Unless you can get him to look at it, you're stuck for now. :) Mike "Silby" Silbersack ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I try to change atapi_dma to "1" but it doesn't work (It was "Re: ATI Radeon IGP 340M")
On Monday 06 October 2003 19:49, Mike Silbersack wrote: > On Mon, 6 Oct 2003, Juan Rodriguez Hervella wrote: > > Thank you very much. > > > > It's working. I've tried to play a DVD using "ogle", but > > it doesn't work very well, the movement isn't steadyI've got > > a friend with the same laptop using Linux and he tells me it works > > nice.so I guess it's a FreeBSD performance problem*sigh* > > > > Thank you anyway. > > > > -- > > JFRH > > FreeBSD doesn't enable DMA access to CD/DVD drives by default, that may be > part of the problem; try enabling atapi_dma (see the ata manpage), that > might help. > > Mike "Silby" Silbersack I've tried both atapi_dma="1" in "loader.conf" and "atacontrol mode 1 udma100 XXX" but when I attempt to access the device, it hangs up. I copy a "dmesg" if this can help. Look at the end there are some error messages related to ATA Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #3: Sun Oct 5 02:07:28 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/JUANILLO Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2658.30-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff real memory = 200736768 (196032K bytes) avail memory = 189956096 (185504K bytes) Preloaded elf kernel "kernel" at 0xc051c000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 5.0 pci0: (vendor=0x10b9, dev=0x5451) at 6.0 irq 5 isab0: at device 7.0 on pci0 isa0: on isab0 pci0: (vendor=0x10b9, dev=0x5457) at 8.0 pci_cfgintr_virgin: using routable interrupt 7 pci_cfgintr: 0:10 INTA routed to irq 7 pcic0: irq 7 at device 10.0 on pci0 pcic0: Could not map register memory 0xd0002000 device_probe_and_attach: pcic0 attach returned 12 uhci0: port 0x2000-0x201f irq 10 at device 11.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2 uhub1: 3 ports with 3 removable, self powered uhci1: port 0x2020-0x203f irq 10 at device 11.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at 11.2 pci0: (vendor=0x104c, dev=0x8026) at 12.0 atapci0: port 0x2040-0x204f irq 0 at device 16.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 chip1: at device 17.0 on pci0 sis0: port 0x2400-0x24ff mem 0xd0008000-0xd0008fff irq 10 at device 18.0 on pci 0 sis0: Ethernet address: 00:0d:9d:46:f2:c9 miibus0: on sis0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: at iomem 0xc-0xcefff,0xcf000-0xcf7ff,0xdf000-0xd,0xe-0xe3fff on isa0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: at port 0x3e0 iomem 0xd on isa0 pcic0: Polling mode pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ad0: 38154MB [77520/16/63] at ata0-master UDMA100 acd0: CD-RW at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present pcic2: irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: irq 7 at device 10.0 on pci0 pcic2: Could not map register memory 0xd0002000 device_probe_and_attach: pcic2 attach returned 12 pcic2: irq 7 at device 1
Re: ATI Radeon IGP 340M
On Mon, 6 Oct 2003, Juan Rodriguez Hervella wrote: > Thank you very much. > > It's working. I've tried to play a DVD using "ogle", but > it doesn't work very well, the movement isn't steadyI've got > a friend with the same laptop using Linux and he tells me it works > nice.so I guess it's a FreeBSD performance problem*sigh* > > Thank you anyway. > > -- > JFRH FreeBSD doesn't enable DMA access to CD/DVD drives by default, that may be part of the problem; try enabling atapi_dma (see the ata manpage), that might help. Mike "Silby" Silbersack ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ATI Radeon IGP 340M
On Saturday 04 October 2003 07:10, Mike Silbersack wrote: > Juan, it recently became possible to use the 340M in its native mode; > simply cvsup to the latest ports tree, and install the > XFree86-4-Server-snap port; the "ati" driver in it supports the 340M in my > laptop just fine. (I have not tested any 3d or tv out functions, > however.) > > Mike "Silby" Silbersack Thank you very much. It's working. I've tried to play a DVD using "ogle", but it doesn't work very well, the movement isn't steadyI've got a friend with the same laptop using Linux and he tells me it works nice.so I guess it's a FreeBSD performance problem*sigh* Thank you anyway. -- JFRH ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
re: ATI Radeon IGP 340M
Juan, it recently became possible to use the 340M in its native mode; simply cvsup to the latest ports tree, and install the XFree86-4-Server-snap port; the "ati" driver in it supports the 340M in my laptop just fine. (I have not tested any 3d or tv out functions, however.) Mike "Silby" Silbersack ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
