Finally,
This is the solution to get a Palm TX work with FBSD-6.X
load the kernel modules 'uvisor.ko', 'ucom.ko', e.g. like this:
(if not already done at boot time)
kldload uvisor
kldload ucom
In order to set up the devfs rules manually do something like this:
devfs ruleset 10
devfs rule add pat
On Sat, Dec 16, 2006 at 02:16:48AM +0100, Armin Arh wrote:
> On Fri, Dec 15, 2006 at 10:19:49AM -0500, Lowell Gilbert wrote:
> > Armin Arh <[EMAIL PROTECTED]> writes:
> >
> > > On Fri, Dec 15, 2006 at 01:16:46AM -0500, Anish Mistry wrote:
> > >> > In /etc/devfs.conf:
> > >> > perm cuaU0 0666
>
On Fri, Dec 15, 2006 at 10:19:49AM -0500, Lowell Gilbert wrote:
> Armin Arh <[EMAIL PROTECTED]> writes:
>
> > On Fri, Dec 15, 2006 at 01:16:46AM -0500, Anish Mistry wrote:
> >> > In /etc/devfs.conf:
> >> > perm cuaU0 0666
> >> >
> >> > but then:
> >> > ## l /dev/cuaU0
> >> > crw-rw 1 uucp
Armin Arh <[EMAIL PROTECTED]> writes:
> On Fri, Dec 15, 2006 at 01:16:46AM -0500, Anish Mistry wrote:
>> > In /etc/devfs.conf:
>> > perm cuaU0 0666
>> >
>> > but then:
>> > ## l /dev/cuaU0
>> > crw-rw 1 uucp dialer - 0, 113 Dec 15 05:00 /dev/cuaU0
>> >
>> > The /dev/devfs.conf permissi
On Fri, Dec 15, 2006 at 01:16:46AM -0500, Anish Mistry wrote:
> > In /etc/devfs.conf:
> > perm cuaU0 0666
> >
> > but then:
> > ## l /dev/cuaU0
> > crw-rw 1 uucp dialer - 0, 113 Dec 15 05:00 /dev/cuaU0
> >
> > The /dev/devfs.conf permissions only apply when i run
> > "/etc/rc.d/devfs re
On Thursday 14 December 2006 23:59, Armin Arh wrote:
> Running a 6.2PRERELEASE kernel here.
>
> Just purchased a brand new Palm TX Handheld and connected
> it via usb to my PC. Surprisingly jpilot did not work, did
> so for my elder Zire71 (which is broken...) running 5.4-RELEASE.
>
> After clearin
